Diff: targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_dma.h

Revision:

180:96ed750bd169

Parent:

156:95d6b41a828b

--- a/targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_dma.h	Thu Dec 07 14:01:42 2017 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_dma.h	Wed Jan 17 15:23:54 2018 +0000
@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f0xx_hal_dma.h
   * @author  MCD Application Team
-  * @version V1.5.0
-  * @date    04-November-2016
   * @brief   Header file of DMA HAL module.
   ******************************************************************************
   * @attention
@@ -365,21 +363,21 @@
   */
 
 /** @brief  Reset DMA handle state
-  * @param  __HANDLE__: DMA handle.
+  * @param  __HANDLE__ DMA handle.
   * @retval None
   */
 #define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
 
 /**
   * @brief  Enable the specified DMA Channel.
-  * @param  __HANDLE__: DMA handle
+  * @param  __HANDLE__ DMA handle
   * @retval None
   */
 #define __HAL_DMA_ENABLE(__HANDLE__)        ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN)
 
 /**
   * @brief  Disable the specified DMA Channel.
-  * @param  __HANDLE__: DMA handle
+  * @param  __HANDLE__ DMA handle
   * @retval None
   */
 #define __HAL_DMA_DISABLE(__HANDLE__)       ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN)
@@ -389,8 +387,8 @@
 
 /**
   * @brief  Enables the specified DMA Channel interrupts.
-  * @param  __HANDLE__: DMA handle
-  * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. 
+  * @param  __HANDLE__ DMA handle
+  * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. 
   *          This parameter can be any combination of the following values:
   *            @arg DMA_IT_TC:  Transfer complete interrupt mask
   *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
@@ -401,8 +399,8 @@
 
 /**
   * @brief  Disables the specified DMA Channel interrupts.
-  * @param  __HANDLE__: DMA handle
-  * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. 
+  * @param  __HANDLE__ DMA handle
+  * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. 
   *          This parameter can be any combination of the following values:
   *            @arg DMA_IT_TC:  Transfer complete interrupt mask
   *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
@@ -413,8 +411,8 @@
 
 /**
   * @brief  Checks whether the specified DMA Channel interrupt is enabled or disabled.
-  * @param  __HANDLE__: DMA handle
-  * @param  __INTERRUPT__: specifies the DMA interrupt source to check.
+  * @param  __HANDLE__ DMA handle
+  * @param  __INTERRUPT__ specifies the DMA interrupt source to check.
   *          This parameter can be one of the following values:
   *            @arg DMA_IT_TC:  Transfer complete interrupt mask
   *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
@@ -425,7 +423,7 @@
 
 /**
   * @brief  Returns the number of remaining data units in the current DMAy Channelx transfer.
-  * @param  __HANDLE__: DMA handle
+  * @param  __HANDLE__ DMA handle
   *   
   * @retval The number of remaining data units in the current DMA Channel transfer.
   */
@@ -433,7 +431,7 @@
 
 #if defined(SYSCFG_CFGR1_DMA_RMP)
 /** @brief  DMA remapping enable/disable macros
-  * @param __DMA_REMAP__: This parameter can be a value of @ref HAL_DMA_remapping
+  * @param __DMA_REMAP__ This parameter can be a value of @ref HAL_DMA_remapping
   */
 #define __HAL_DMA_REMAP_CHANNEL_ENABLE(__DMA_REMAP__)   do {assert_param(IS_DMA_REMAP((__DMA_REMAP__)));                  \
                                                            SYSCFG->CFGR1 |= (__DMA_REMAP__);                              \