Diff: targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_conf.h

Revision:

180:96ed750bd169

Parent:

167:e84263d55307

--- a/targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_conf.h	Thu Dec 07 14:01:42 2017 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_conf.h	Wed Jan 17 15:23:54 2018 +0000
@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f0xx_hal_conf.h
   * @author  MCD Application Team
-  * @version V1.5.0
-  * @date    04-November-2016
   * @brief   HAL configuration file.
   ******************************************************************************
   * @attention
@@ -85,7 +83,7 @@
   *        (when HSE is used as system clock source, directly or through the PLL).  
   */
 #if !defined  (HSE_VALUE) 
-  #define HSE_VALUE    (8000000U) /*!< Value of the External oscillator in Hz */
+  #define HSE_VALUE            8000000U  /*!< Value of the External oscillator in Hz */
 #endif /* HSE_VALUE */
 
 /**
@@ -93,7 +91,7 @@
   *        Timeout value 
   */
 #if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
+  #define HSE_STARTUP_TIMEOUT  100U      /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**
@@ -102,7 +100,7 @@
   *        (when HSI is used as system clock source, directly or through the PLL). 
   */
 #if !defined  (HSI_VALUE)
-  #define HSI_VALUE    (8000000U) /*!< Value of the Internal oscillator in Hz*/
+  #define HSI_VALUE            8000000U  /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
 /**
@@ -110,14 +108,14 @@
   *        Timeout value 
   */
 #if !defined  (HSI_STARTUP_TIMEOUT) 
- #define HSI_STARTUP_TIMEOUT   (5000U) /*!< Time out for HSI start up */
+  #define HSI_STARTUP_TIMEOUT  5000U     /*!< Time out for HSI start up */
 #endif /* HSI_STARTUP_TIMEOUT */  
 
 /**
   * @brief Internal High Speed oscillator for ADC (HSI14) value.
   */
 #if !defined  (HSI14_VALUE) 
-#define HSI14_VALUE (14000000U) /*!< Value of the Internal High Speed oscillator for ADC in Hz.
+  #define HSI14_VALUE          14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz.
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
 #endif /* HSI14_VALUE */
@@ -126,7 +124,7 @@
   * @brief Internal High Speed oscillator for USB (HSI48) value.
   */
 #if !defined  (HSI48_VALUE) 
-#define HSI48_VALUE (48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz.
+  #define HSI48_VALUE          48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz.
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
 #endif /* HSI48_VALUE */
@@ -135,22 +133,22 @@
   * @brief Internal Low Speed oscillator (LSI) value.
   */
 #if !defined  (LSI_VALUE) 
- #define LSI_VALUE  (40000U)    
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+  #define LSI_VALUE            40000U    
+#endif /* LSI_VALUE */                   /*!< Value of the Internal Low Speed oscillator in Hz
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
 /**
   * @brief External Low Speed oscillator (LSE) value.
   */
 #if !defined  (LSE_VALUE)
- #define LSE_VALUE  (32768U)    /*!< Value of the External Low Speed oscillator in Hz */
+  #define LSE_VALUE            32768U    /*!< Value of the External Low Speed oscillator in Hz */
 #endif /* LSE_VALUE */
 
 /**
   * @brief Time out for LSE start up value in ms.
   */
 #if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    (5000U)   /*!< Time out for LSE start up, in ms */
+  #define LSE_STARTUP_TIMEOUT  5000U     /*!< Time out for LSE start up, in ms */
 #endif /* LSE_STARTUP_TIMEOUT */
 
 
@@ -161,14 +159,15 @@
 /**
   * @brief This is the HAL system configuration section
   */     
-#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */           
-#define  TICK_INT_PRIORITY            ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U)   /*!< tick interrupt priority (lowest by default)             */
+#define  VDD_VALUE                    3300U  /*!< Value of VDD in mv */           
+#define  TICK_INT_PRIORITY            ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default)             */
                                                                               /*  Warning: Must be set to higher priority for HAL_Delay()  */
                                                                               /*  and HAL_GetTick() usage under interrupt context          */
-#define  USE_RTOS                     0
-#define  PREFETCH_ENABLE              1
-#define  INSTRUCTION_CACHE_ENABLE     0
-#define  DATA_CACHE_ENABLE            0
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+#define  INSTRUCTION_CACHE_ENABLE     0U
+#define  DATA_CACHE_ENABLE            0U
+#define  USE_SPI_CRC                  1U
 
 /* ########################## Assert Selection ############################## */
 /**
@@ -177,15 +176,6 @@
   */
 /*#define USE_FULL_ASSERT    1*/
 
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
 /* Includes ------------------------------------------------------------------*/
 /**
   * @brief Include module's header file