mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
Diff: targets/TARGET_NUVOTON/TARGET_M480/device/StdDriver/m480_usbd.h
- Revision:
- 172:7d866c31b3c5
- Child:
- 173:e131a1973e81
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/TARGET_NUVOTON/TARGET_M480/device/StdDriver/m480_usbd.h Thu Aug 31 17:27:04 2017 +0100 @@ -0,0 +1,685 @@ +/**************************************************************************//** + * @file usbd.h + * @version V1.00 + * @brief M480 series USB driver header file + * + * @copyright (C) 2016 Nuvoton Technology Corp. All rights reserved. + ******************************************************************************/ +#ifndef __USBD_H__ +#define __USBD_H__ + +#ifdef __cplusplus +extern "C" +{ +#endif + + +/** @addtogroup M480_Device_Driver M480 Device Driver + @{ +*/ + +/** @addtogroup M480_USBD_Driver USBD Driver + @{ +*/ + +/** @addtogroup M480_USBD_EXPORTED_STRUCT USBD Exported Struct + @{ +*/ +typedef struct s_usbd_info { + uint8_t *gu8DevDesc; /*!< Pointer for USB Device Descriptor */ + uint8_t *gu8ConfigDesc; /*!< Pointer for USB Configuration Descriptor */ + uint8_t **gu8StringDesc; /*!< Pointer for USB String Descriptor pointers */ + uint8_t **gu8HidReportDesc; /*!< Pointer for USB HID Report Descriptor */ + uint8_t *gu8BosDesc; /*!< Pointer for USB BOS Descriptor */ + uint32_t *gu32HidReportSize; /*!< Pointer for HID Report descriptor Size */ + uint32_t *gu32ConfigHidDescIdx; /*!< Pointer for HID Descriptor start index */ + +} S_USBD_INFO_T; /*!< Device description structure */ + +extern const S_USBD_INFO_T gsInfo; + +/*@}*/ /* end of group M480_USBD_EXPORTED_STRUCT */ + + + + +/** @addtogroup M480_USBD_EXPORTED_CONSTANTS USBD Exported Constants + @{ +*/ +#define USBD_BUF_BASE (USBD_BASE+0x100ul) /*!< USBD buffer base address \hideinitializer */ +#define USBD_MAX_EP 12ul /*!< Total EP number \hideinitializer */ + +#define EP0 0ul /*!< Endpoint 0 \hideinitializer */ +#define EP1 1ul /*!< Endpoint 1 \hideinitializer */ +#define EP2 2ul /*!< Endpoint 2 \hideinitializer */ +#define EP3 3ul /*!< Endpoint 3 \hideinitializer */ +#define EP4 4ul /*!< Endpoint 4 \hideinitializer */ +#define EP5 5ul /*!< Endpoint 5 \hideinitializer */ +#define EP6 6ul /*!< Endpoint 6 \hideinitializer */ +#define EP7 7ul /*!< Endpoint 7 \hideinitializer */ +#define EP8 8ul /*!< Endpoint 8 \hideinitializer */ +#define EP9 9ul /*!< Endpoint 9 \hideinitializer */ +#define EP10 10ul /*!< Endpoint 10 \hideinitializer */ +#define EP11 11ul /*!< Endpoint 11 \hideinitializer */ + +/** @cond HIDDEN_SYMBOLS */ +/* USB Request Type */ +#define REQ_STANDARD 0x00ul +#define REQ_CLASS 0x20ul +#define REQ_VENDOR 0x40ul + +/* USB Standard Request */ +#define GET_STATUS 0x00ul +#define CLEAR_FEATURE 0x01ul +#define SET_FEATURE 0x03ul +#define SET_ADDRESS 0x05ul +#define GET_DESCRIPTOR 0x06ul +#define SET_DESCRIPTOR 0x07ul +#define GET_CONFIGURATION 0x08ul +#define SET_CONFIGURATION 0x09ul +#define GET_INTERFACE 0x0Aul +#define SET_INTERFACE 0x0Bul +#define SYNC_FRAME 0x0Cul + +/* USB Descriptor Type */ +#define DESC_DEVICE 0x01ul +#define DESC_CONFIG 0x02ul +#define DESC_STRING 0x03ul +#define DESC_INTERFACE 0x04ul +#define DESC_ENDPOINT 0x05ul +#define DESC_QUALIFIER 0x06ul +#define DESC_OTHERSPEED 0x07ul +#define DESC_IFPOWER 0x08ul +#define DESC_OTG 0x09ul +#define DESC_BOS 0x0Ful +#define DESC_CAPABILITY 0x10ul + +/* USB Device Capability Type */ +#define CAP_WIRELESS 0x01ul +#define CAP_USB20_EXT 0x02ul + +/* USB HID Descriptor Type */ +#define DESC_HID 0x21ul +#define DESC_HID_RPT 0x22ul + +/* USB Descriptor Length */ +#define LEN_DEVICE 18ul +#define LEN_QUALIFIER 10ul +#define LEN_CONFIG 9ul +#define LEN_INTERFACE 9ul +#define LEN_ENDPOINT 7ul +#define LEN_OTG 5ul +#define LEN_BOS 5ul +#define LEN_HID 9ul +#define LEN_CCID 0x36ul +#define LEN_BOSCAP 7ul + +/* USB Endpoint Type */ +#define EP_ISO 0x01 +#define EP_BULK 0x02 +#define EP_INT 0x03 + +#define EP_INPUT 0x80 +#define EP_OUTPUT 0x00 + +/* USB Feature Selector */ +#define FEATURE_DEVICE_REMOTE_WAKEUP 0x01ul +#define FEATURE_ENDPOINT_HALT 0x00ul +/** @endcond HIDDEN_SYMBOLS */ + +/******************************************************************************/ +/* USB Specific Macros */ +/******************************************************************************/ + +#define USBD_WAKEUP_EN USBD_INTEN_WKEN_Msk /*!< USB Wake-up Enable \hideinitializer */ +#define USBD_DRVSE0 USBD_SE0_SE0_Msk /*!< Drive SE0 \hideinitializer */ + +#define USBD_DPPU_EN USBD_ATTR_DPPUEN_Msk /*!< USB D+ Pull-up Enable \hideinitializer */ +#define USBD_PWRDN USBD_ATTR_PWRDN_Msk /*!< PHY Turn-On \hideinitializer */ +#define USBD_PHY_EN USBD_ATTR_PHYEN_Msk /*!< PHY Enable \hideinitializer */ +#define USBD_USB_EN USBD_ATTR_USBEN_Msk /*!< USB Enable \hideinitializer */ + +#define USBD_INT_BUS USBD_INTEN_BUSIEN_Msk /*!< USB Bus Event Interrupt \hideinitializer */ +#define USBD_INT_USB USBD_INTEN_USBIEN_Msk /*!< USB Event Interrupt \hideinitializer */ +#define USBD_INT_FLDET USBD_INTEN_VBDETIEN_Msk /*!< USB VBUS Detection Interrupt \hideinitializer */ +#define USBD_INT_WAKEUP (USBD_INTEN_NEVWKIEN_Msk | USBD_INTEN_WKEN_Msk) /*!< USB No-Event-Wake-Up Interrupt \hideinitializer */ + +#define USBD_INTSTS_WAKEUP USBD_INTSTS_NEVWKIF_Msk /*!< USB No-Event-Wake-Up Interrupt Status \hideinitializer */ +#define USBD_INTSTS_FLDET USBD_INTSTS_VBDETIF_Msk /*!< USB Float Detect Interrupt Status \hideinitializer */ +#define USBD_INTSTS_BUS USBD_INTSTS_BUSIF_Msk /*!< USB Bus Event Interrupt Status \hideinitializer */ +#define USBD_INTSTS_USB USBD_INTSTS_USBIF_Msk /*!< USB Event Interrupt Status \hideinitializer */ +#define USBD_INTSTS_SETUP USBD_INTSTS_SETUP_Msk /*!< USB Setup Event \hideinitializer */ +#define USBD_INTSTS_EP0 USBD_INTSTS_EPEVT0_Msk /*!< USB Endpoint 0 Event \hideinitializer */ +#define USBD_INTSTS_EP1 USBD_INTSTS_EPEVT1_Msk /*!< USB Endpoint 1 Event \hideinitializer */ +#define USBD_INTSTS_EP2 USBD_INTSTS_EPEVT2_Msk /*!< USB Endpoint 2 Event \hideinitializer */ +#define USBD_INTSTS_EP3 USBD_INTSTS_EPEVT3_Msk /*!< USB Endpoint 3 Event \hideinitializer */ +#define USBD_INTSTS_EP4 USBD_INTSTS_EPEVT4_Msk /*!< USB Endpoint 4 Event \hideinitializer */ +#define USBD_INTSTS_EP5 USBD_INTSTS_EPEVT5_Msk /*!< USB Endpoint 5 Event \hideinitializer */ +#define USBD_INTSTS_EP6 USBD_INTSTS_EPEVT6_Msk /*!< USB Endpoint 6 Event \hideinitializer */ +#define USBD_INTSTS_EP7 USBD_INTSTS_EPEVT7_Msk /*!< USB Endpoint 7 Event \hideinitializer */ +#define USBD_INTSTS_EP8 USBD_INTSTS_EPEVT8_Msk /*!< USB Endpoint 8 Event \hideinitializer */ +#define USBD_INTSTS_EP9 USBD_INTSTS_EPEVT9_Msk /*!< USB Endpoint 9 Event \hideinitializer */ +#define USBD_INTSTS_EP10 USBD_INTSTS_EPEVT10_Msk /*!< USB Endpoint 10 Event \hideinitializer */ +#define USBD_INTSTS_EP11 USBD_INTSTS_EPEVT11_Msk /*!< USB Endpoint 11 Event \hideinitializer */ + +#define USBD_STATE_USBRST USBD_ATTR_USBRST_Msk /*!< USB Bus Reset \hideinitializer */ +#define USBD_STATE_SUSPEND USBD_ATTR_SUSPEND_Msk /*!< USB Bus Suspend \hideinitializer */ +#define USBD_STATE_RESUME USBD_ATTR_RESUME_Msk /*!< USB Bus Resume \hideinitializer */ +#define USBD_STATE_TIMEOUT USBD_ATTR_TOUT_Msk /*!< USB Bus Timeout \hideinitializer */ + +#define USBD_CFGP_SSTALL USBD_CFGP_SSTALL_Msk /*!< Set Stall \hideinitializer */ +#define USBD_CFG_CSTALL USBD_CFG_CSTALL_Msk /*!< Clear Stall \hideinitializer */ + +#define USBD_CFG_EPMODE_DISABLE (0ul << USBD_CFG_STATE_Pos)/*!< Endpoint Disable \hideinitializer */ +#define USBD_CFG_EPMODE_OUT (1ul << USBD_CFG_STATE_Pos)/*!< Out Endpoint \hideinitializer */ +#define USBD_CFG_EPMODE_IN (2ul << USBD_CFG_STATE_Pos)/*!< In Endpoint \hideinitializer */ +#define USBD_CFG_TYPE_ISO (1ul << USBD_CFG_ISOCH_Pos) /*!< Isochronous \hideinitializer */ + + + +/*@}*/ /* end of group M480_USBD_EXPORTED_CONSTANTS */ + + +/** @addtogroup M480_USBD_EXPORTED_FUNCTIONS USBD Exported Functions + @{ +*/ +/** + * @brief Compare two input numbers and return maximum one. + * + * @param[in] a First number to be compared. + * @param[in] b Second number to be compared. + * + * @return Maximum value between a and b. + * + * @details If a > b, then return a. Otherwise, return b. + * \hideinitializer + */ +#define USBD_Maximum(a,b) ((a)>(b) ? (a) : (b)) + + +/** + * @brief Compare two input numbers and return minimum one + * + * @param[in] a First number to be compared + * @param[in] b Second number to be compared + * + * @return Minimum value between a and b + * + * @details If a < b, then return a. Otherwise, return b. + * \hideinitializer + */ +#define USBD_Minimum(a,b) ((a)<(b) ? (a) : (b)) + + +/** + * @brief Enable USB + * + * @param None + * + * @return None + * + * @details To set USB ATTR control register to enable USB and PHY. + * \hideinitializer + */ +#define USBD_ENABLE_USB() ((uint32_t)(USBD->ATTR |= 0x7D0)) + +/** + * @brief Disable USB + * + * @param None + * + * @return None + * + * @details To set USB ATTR control register to disable USB. + * \hideinitializer + */ +#define USBD_DISABLE_USB() ((uint32_t)(USBD->ATTR &= ~USBD_USB_EN)) + +/** + * @brief Enable USB PHY + * + * @param None + * + * @return None + * + * @details To set USB ATTR control register to enable USB PHY. + * \hideinitializer + */ +#define USBD_ENABLE_PHY() ((uint32_t)(USBD->ATTR |= USBD_PHY_EN)) + +/** + * @brief Disable USB PHY + * + * @param None + * + * @return None + * + * @details To set USB ATTR control register to disable USB PHY. + * \hideinitializer + */ +#define USBD_DISABLE_PHY() ((uint32_t)(USBD->ATTR &= ~USBD_PHY_EN)) + +/** + * @brief Enable SE0. Force USB PHY transceiver to drive SE0. + * + * @param None + * + * @return None + * + * @details Set DRVSE0 bit of USB_DRVSE0 register to enable software-disconnect function. Force USB PHY transceiver to drive SE0 to bus. + * \hideinitializer + */ +#define USBD_SET_SE0() ((uint32_t)(USBD->SE0 |= USBD_DRVSE0)) + +/** + * @brief Disable SE0 + * + * @param None + * + * @return None + * + * @details Clear DRVSE0 bit of USB_DRVSE0 register to disable software-disconnect function. + * \hideinitializer + */ +#define USBD_CLR_SE0() ((uint32_t)(USBD->SE0 &= ~USBD_DRVSE0)) + +/** + * @brief Set USB device address + * + * @param[in] addr The USB device address. + * + * @return None + * + * @details Write USB device address to USB_FADDR register. + * \hideinitializer + */ +#define USBD_SET_ADDR(addr) (USBD->FADDR = (addr)) + +/** + * @brief Get USB device address + * + * @param None + * + * @return USB device address + * + * @details Read USB_FADDR register to get USB device address. + * \hideinitializer + */ +#define USBD_GET_ADDR() ((uint32_t)(USBD->FADDR)) + +/** + * @brief Enable USB interrupt function + * + * @param[in] intr The combination of the specified interrupt enable bits. + * Each bit corresponds to a interrupt enable bit. + * This parameter decides which interrupts will be enabled. + * (USBD_INT_WAKEUP, USBD_INT_FLDET, USBD_INT_USB, USBD_INT_BUS) + * + * @return None + * + * @details Enable USB related interrupt functions specified by intr parameter. + * \hideinitializer + */ +#define USBD_ENABLE_INT(intr) (USBD->INTEN |= (intr)) + +/** + * @brief Get interrupt status + * + * @param None + * + * @return The value of USB_INTSTS register + * + * @details Return all interrupt flags of USB_INTSTS register. + * \hideinitializer + */ +#define USBD_GET_INT_FLAG() ((uint32_t)(USBD->INTSTS)) + +/** + * @brief Clear USB interrupt flag + * + * @param[in] flag The combination of the specified interrupt flags. + * Each bit corresponds to a interrupt source. + * This parameter decides which interrupt flags will be cleared. + * (USBD_INTSTS_WAKEUP, USBD_INTSTS_FLDET, USBD_INTSTS_BUS, USBD_INTSTS_USB) + * + * @return None + * + * @details Clear USB related interrupt flags specified by flag parameter. + * \hideinitializer + */ +#define USBD_CLR_INT_FLAG(flag) (USBD->INTSTS = (flag)) + +/** + * @brief Get endpoint status + * + * @param None + * + * @return The value of USB_EPSTS register. + * + * @details Return all endpoint status. + * \hideinitializer + */ +#define USBD_GET_EP_FLAG() ((uint32_t)(USBD->EPSTS)) + +/** + * @brief Get USB bus state + * + * @param None + * + * @return The value of USB_ATTR[3:0]. + * Bit 0 indicates USB bus reset status. + * Bit 1 indicates USB bus suspend status. + * Bit 2 indicates USB bus resume status. + * Bit 3 indicates USB bus time-out status. + * + * @details Return USB_ATTR[3:0] for USB bus events. + * \hideinitializer + */ +#define USBD_GET_BUS_STATE() ((uint32_t)(USBD->ATTR & 0xf)) + +/** + * @brief Check cable connection state + * + * @param None + * + * @retval 0 USB cable is not attached. + * @retval 1 USB cable is attached. + * + * @details Check the connection state by FLDET bit of USB_FLDET register. + * \hideinitializer + */ +#define USBD_IS_ATTACHED() ((uint32_t)(USBD->VBUSDET & USBD_VBUSDET_VBUSDET_Msk)) + +/** + * @brief Stop USB transaction of the specified endpoint ID + * + * @param[in] ep The USB endpoint ID. M480 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 11. + * + * @return None + * + * @details Write 1 to CLRRDY bit of USB_CFGPx register to stop USB transaction of the specified endpoint ID. + * \hideinitializer + */ +#define USBD_STOP_TRANSACTION(ep) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].CFGP + (uint32_t)((ep) << 4))) |= USBD_CFGP_CLRRDY_Msk) + +/** + * @brief Set USB DATA1 PID for the specified endpoint ID + * + * @param[in] ep The USB endpoint ID. M480 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 11. + * + * @return None + * + * @details Set DSQ_SYNC bit of USB_CFGx register to specify the DATA1 PID for the following IN token transaction. + * Base on this setting, hardware will toggle PID between DATA0 and DATA1 automatically for IN token transactions. + * \hideinitializer + */ +#define USBD_SET_DATA1(ep) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].CFG + (uint32_t)((ep) << 4))) |= USBD_CFG_DSQSYNC_Msk) + +/** + * @brief Set USB DATA0 PID for the specified endpoint ID + * + * @param[in] ep The USB endpoint ID. M480 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 11. + * + * @return None + * + * @details Clear DSQ_SYNC bit of USB_CFGx register to specify the DATA0 PID for the following IN token transaction. + * Base on this setting, hardware will toggle PID between DATA0 and DATA1 automatically for IN token transactions. + * \hideinitializer + */ +#define USBD_SET_DATA0(ep) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].CFG + (uint32_t)((ep) << 4))) &= (~USBD_CFG_DSQSYNC_Msk)) + +/** + * @brief Set USB payload size (IN data) + * + * @param[in] ep The USB endpoint ID. M480 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 11. + * + * @param[in] size The transfer length. + * + * @return None + * + * @details This macro will write the transfer length to USB_MXPLDx register for IN data transaction. + * \hideinitializer + */ +#define USBD_SET_PAYLOAD_LEN(ep, size) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].MXPLD + (uint32_t)((ep) << 4))) = (size)) + +/** + * @brief Get USB payload size (OUT data) + * + * @param[in] ep The USB endpoint ID. M480 Series supports 8 endpoint ID. This parameter could be 0 ~ 11. + * + * @return The value of USB_MXPLDx register. + * + * @details Get the data length of OUT data transaction by reading USB_MXPLDx register. + * \hideinitializer + */ +#define USBD_GET_PAYLOAD_LEN(ep) ((uint32_t)*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].MXPLD + (uint32_t)((ep) << 4)))) + +/** + * @brief Configure endpoint + * + * @param[in] ep The USB endpoint ID. M480 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 11. + * + * @param[in] config The USB configuration. + * + * @return None + * + * @details This macro will write config parameter to USB_CFGx register of specified endpoint ID. + * \hideinitializer + */ +#define USBD_CONFIG_EP(ep, config) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].CFG + (uint32_t)((ep) << 4))) = (config)) + +/** + * @brief Set USB endpoint buffer + * + * @param[in] ep The USB endpoint ID. M480 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 11. + * + * @param[in] offset The SRAM offset. + * + * @return None + * + * @details This macro will set the SRAM offset for the specified endpoint ID. + * \hideinitializer + */ +#define USBD_SET_EP_BUF_ADDR(ep, offset) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].BUFSEG + (uint32_t)((ep) << 4))) = (offset)) + +/** + * @brief Get the offset of the specified USB endpoint buffer + * + * @param[in] ep The USB endpoint ID. M480 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 11. + * + * @return The offset of the specified endpoint buffer. + * + * @details This macro will return the SRAM offset of the specified endpoint ID. + * \hideinitializer + */ +#define USBD_GET_EP_BUF_ADDR(ep) ((uint32_t)*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].BUFSEG + (uint32_t)((ep) << 4)))) + +/** + * @brief Set USB endpoint stall state + * + * @param[in] ep The USB endpoint ID. M480 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 11. + * + * @return None + * + * @details Set USB endpoint stall state for the specified endpoint ID. Endpoint will respond STALL token automatically. + * \hideinitializer + */ +#define USBD_SET_EP_STALL(ep) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0ul].CFGP + (uint32_t)((ep) << 4))) |= USBD_CFGP_SSTALL_Msk) + +/** + * @brief Clear USB endpoint stall state + * + * @param[in] ep The USB endpoint ID. M480 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 11. + * + * @return None + * + * @details Clear USB endpoint stall state for the specified endpoint ID. Endpoint will respond ACK/NAK token. + * \hideinitializer + */ +#define USBD_CLR_EP_STALL(ep) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].CFGP + (uint32_t)((ep) << 4))) &= ~USBD_CFGP_SSTALL_Msk) + +/** + * @brief Get USB endpoint stall state + * + * @param[in] ep The USB endpoint ID. M480 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 11. + * + * @retval 0 USB endpoint is not stalled. + * @retval Others USB endpoint is stalled. + * + * @details Get USB endpoint stall state of the specified endpoint ID. + * \hideinitializer + */ +#define USBD_GET_EP_STALL(ep) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].CFGP + (uint32_t)((ep) << 4))) & USBD_CFGP_SSTALL_Msk) + +/** + * @brief To support byte access between USB SRAM and system SRAM + * + * @param[in] dest Destination pointer. + * + * @param[in] src Source pointer. + * + * @param[in] size Byte count. + * + * @return None + * + * @details This function will copy the number of data specified by size and src parameters to the address specified by dest parameter. + * + */ +static __INLINE void USBD_MemCopy(uint8_t dest[], uint8_t src[], uint32_t size) +{ + uint32_t volatile i=0ul; + + while(size--) + { + dest[i] = src[i]; + i++; + } +} + +/** + * @brief Set USB endpoint stall state + * + * @param[in] epnum USB endpoint number + * + * @return None + * + * @details Set USB endpoint stall state. Endpoint will respond STALL token automatically. + * + */ +static __INLINE void USBD_SetStall(uint8_t epnum) +{ + uint32_t u32CfgAddr; + uint32_t u32Cfg; + uint32_t i; + + for(i = 0ul; i < USBD_MAX_EP; i++) { + u32CfgAddr = (uint32_t)(i << 4) + (uint32_t)&USBD->EP[0].CFG; /* USBD_CFG0 */ + u32Cfg = *((__IO uint32_t *)(u32CfgAddr)); + + if((u32Cfg & 0xful) == epnum) { + u32CfgAddr = (uint32_t)(i << 4) + (uint32_t)&USBD->EP[0].CFGP; /* USBD_CFGP0 */ + u32Cfg = *((__IO uint32_t *)(u32CfgAddr)); + + *((__IO uint32_t *)(u32CfgAddr)) = (u32Cfg | USBD_CFGP_SSTALL); + break; + } + } +} + +/** + * @brief Clear USB endpoint stall state + * + * @param[in] epnum USB endpoint number + * + * @return None + * + * @details Clear USB endpoint stall state. Endpoint will respond ACK/NAK token. + */ +static __INLINE void USBD_ClearStall(uint8_t epnum) +{ + uint32_t u32CfgAddr; + uint32_t u32Cfg; + uint32_t i; + + for(i = 0ul; i < USBD_MAX_EP; i++) { + u32CfgAddr = (uint32_t)(i << 4) + (uint32_t)&USBD->EP[0].CFG; /* USBD_CFG0 */ + u32Cfg = *((__IO uint32_t *)(u32CfgAddr)); + + if((u32Cfg & 0xful) == epnum) { + u32CfgAddr = (uint32_t)(i << 4) + (uint32_t)&USBD->EP[0].CFGP; /* USBD_CFGP0 */ + u32Cfg = *((__IO uint32_t *)(u32CfgAddr)); + + *((__IO uint32_t *)(u32CfgAddr)) = (u32Cfg & ~USBD_CFGP_SSTALL); + break; + } + } +} + +/** + * @brief Get USB endpoint stall state + * + * @param[in] epnum USB endpoint number + * + * @retval 0 USB endpoint is not stalled. + * @retval Others USB endpoint is stalled. + * + * @details Get USB endpoint stall state. + * + */ +static __INLINE uint32_t USBD_GetStall(uint8_t epnum) +{ + uint32_t u32CfgAddr; + uint32_t u32Cfg; + uint32_t i; + + for(i = 0ul; i < USBD_MAX_EP; i++) { + u32CfgAddr = (uint32_t)(i << 4) + (uint32_t)&USBD->EP[0].CFG; /* USBD_CFG0 */ + u32Cfg = *((__IO uint32_t *)(u32CfgAddr)); + + if((u32Cfg & 0xful) == epnum) { + u32CfgAddr = (uint32_t)(i << 4) + (uint32_t)&USBD->EP[0].CFGP; /* USBD_CFGP0 */ + break; + } + } + + return ((*((__IO uint32_t *)(u32CfgAddr))) & USBD_CFGP_SSTALL); +} + + +extern volatile uint8_t g_usbd_RemoteWakeupEn; + + +typedef void (*VENDOR_REQ)(void); /*!< Functional pointer type definition for Vendor class */ +typedef void (*CLASS_REQ)(void); /*!< Functional pointer type declaration for USB class request callback handler */ +typedef void (*SET_INTERFACE_REQ)(uint32_t u32AltInterface); /*!< Functional pointer type declaration for USB set interface request callback handler */ +typedef void (*SET_CONFIG_CB)(void); /*!< Functional pointer type declaration for USB set configuration request callback handler */ + + +/*--------------------------------------------------------------------*/ +void USBD_Open(const S_USBD_INFO_T *param, CLASS_REQ pfnClassReq, SET_INTERFACE_REQ pfnSetInterface); +void USBD_Start(void); +void USBD_GetSetupPacket(uint8_t *buf); +void USBD_ProcessSetupPacket(void); +void USBD_StandardRequest(void); +void USBD_PrepareCtrlIn(uint8_t pu8Buf[], uint32_t u32Size); +void USBD_CtrlIn(void); +void USBD_PrepareCtrlOut(uint8_t *pu8Buf, uint32_t u32Size); +void USBD_CtrlOut(void); +void USBD_SwReset(void); +void USBD_SetVendorRequest(VENDOR_REQ pfnVendorReq); +void USBD_SetConfigCallback(SET_CONFIG_CB pfnSetConfigCallback); +void USBD_LockEpStall(uint32_t u32EpBitmap); + +/*@}*/ /* end of group M480_USBD_EXPORTED_FUNCTIONS */ + +/*@}*/ /* end of group M480_USBD_Driver */ + +/*@}*/ /* end of group M480_Device_Driver */ + +#ifdef __cplusplus +} +#endif + +#endif /*__USBD_H__*/ + +/*** (C) COPYRIGHT 2016 Nuvoton Technology Corp. ***/