Diff: targets/TARGET_Maxim/TARGET_MAX32620C/mxc/uart.h

Revision:

186:707f6e361f3e

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Maxim/TARGET_MAX32620C/mxc/uart.h	Fri Jun 22 16:45:37 2018 +0100
@@ -0,0 +1,337 @@
+/**
+ * @file
+ * @brief UART data types, definitions and function prototypes.
+ */
+ /* ****************************************************************************
+ * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *
+ * $Date: 2017-02-27 18:18:01 -0600 (Mon, 27 Feb 2017) $
+ * $Revision: 26714 $
+ *
+ **************************************************************************** */
+
+/* **** Includes **** */ 
+#include "mxc_config.h"
+#include "mxc_sys.h"
+#include "uart_regs.h"
+
+/* Define to prevent redundant inclusion */
+#ifndef _UART_H_
+#define _UART_H_
+/**
+ * @ingroup periphlibs
+ * @defgroup uart_top UART API and Registers
+ * @{
+ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+
+/* **** Definitions **** */
+
+/**
+ * Enumeration type for defining the number of bits per character. 
+ */
+typedef enum {
+    UART_DATA_SIZE_5_BITS = MXC_V_UART_CTRL_DATA_SIZE_5_BITS, /**< 5 Data bits per UART character. */
+    UART_DATA_SIZE_6_BITS = MXC_V_UART_CTRL_DATA_SIZE_6_BITS, /**< 6 Data bits per UART character. */
+    UART_DATA_SIZE_7_BITS = MXC_V_UART_CTRL_DATA_SIZE_7_BITS, /**< 7 Data bits per UART character. */
+    UART_DATA_SIZE_8_BITS = MXC_V_UART_CTRL_DATA_SIZE_8_BITS  /**< 8 Data bits per UART character. */
+}
+uart_data_size_t;
+
+/**
+ * Enumeration type for selecting Parity and type. 
+ */
+typedef enum {
+    UART_PARITY_DISABLE = MXC_V_UART_CTRL_PARITY_DISABLE,    /**< Parity disabled.  */
+    UART_PARITY_ODD     = MXC_V_UART_CTRL_PARITY_ODD,        /**< Odd parity.       */
+    UART_PARITY_EVEN    = MXC_V_UART_CTRL_PARITY_EVEN,       /**< Even parity.      */
+    UART_PARITY_MARK    = MXC_V_UART_CTRL_PARITY_MARK        /**< Mark parity.      */
+} uart_parity_t;
+
+/**
+ * Configuration structure type for a UART port. 
+ */
+typedef struct {
+    uint8_t extra_stop;             /**< @c 0 for one stop bit, @c 1 for two stop bits*/
+    uint8_t cts;                    /**< CTS Enable/Disable, @c 1 to enable CTS, @c 0 to disable CTS.*/
+    uint8_t rts;                    /**< @c 1 to enable RTS, @c 0 to disable RTS. */
+    uint32_t baud;                  /**< Baud rate in Hz.                                               */
+    uart_data_size_t size;          /**< Set the number of bits per character, see uart_data_size_t.   */
+    uart_parity_t parity;           /**< Set the parity, see uart_parity_t for supported parity types. */
+} uart_cfg_t;
+/** @} */
+/**
+ * @ingroup uart_top
+ * @defgroup uart_async UART Asynchronous Functions
+ * @{
+ */
+  
+/**
+ * Structure type for a UART asynchronous transaction request.
+ */
+typedef struct uart_req uart_req_t;
+
+/**
+ * @brief   Type alias for a UART callback function used for asynchronous operations. 
+ * @details  
+ * Type alias \c uart_async_callback for a callback function with signature of: 
+ * @code{.c}
+ *    void callback_fn(uart_req_t *request , int error_code);
+ * @endcode
+ * @p uart_req_t *    Pointer to the transaction request.
+ * @p error_code      Return code for the UART request. See @ref MXC_Error_Codes for possible codes. 
+ */
+typedef void (*uart_async_callback)(uart_req_t*, int); 
+
+/**
+ * Structure for a UART asynchronous transaction request.
+ * @note       When using this structure for an asynchronous operation, the
+ *             structure must remain allocated until the callback is completed.
+ */
+struct uart_req {
+    uint8_t *data;                  /**< Data buffer for characters.                                    */
+    unsigned len;                   /**< Length of characters in data to send or receive.               */
+    unsigned num;                   /**< Number of characters actually sent or received.                */
+    uart_async_callback callback;   /**< Pointer to a callback function of type uart_async_callback()   */
+};
+
+/** @} */ 
+/* **** Globals **** */
+
+/* **** Function Prototypes **** */
+/**
+ * @ingroup uart_top
+ * @{
+ */
+/**
+ * @brief   Initialize and enable UART module.
+ * @param   uart        Pointer to the UART registers.
+ * @param   cfg         Pointer to UART configuration.
+ * @param   sys_cfg     Pointer to system configuration object
+ * @returns #E_NO_ERROR UART initialized successfully, @ref MXC_Error_Codes "error" if
+ *             unsuccessful.
+ */
+int UART_Init(mxc_uart_regs_t *uart, const uart_cfg_t *cfg, const sys_cfg_uart_t *sys_cfg);
+
+/**
+ * @brief   Shutdown UART module.
+ * @param   uart    Pointer to the UART registers.
+ * @returns #E_NO_ERROR UART shutdown successfully, @ref MXC_Error_Codes "error" if
+ *             unsuccessful.
+ */
+int UART_Shutdown(mxc_uart_regs_t *uart);
+/**@}*/
+/**
+ * @ingroup uart_top
+ * @defgroup uart_sync UART Synchronous Functions
+ * @brief Synchronous/blocking Functions for the UART peripheral.
+ * @{
+ */
+
+/**
+ * @brief      Write UART data. This function blocks until the write transaction
+ *             is complete.
+ * @param      uart  Pointer to the UART registers.
+ * @param      data  Pointer to buffer for write data.
+ * @param      len   Number of bytes to write.
+ * @note       Will return once data has been put into FIFO, not necessarily
+ *             transmitted.
+ * @return     Number of bytes written if successful, error if unsuccessful.
+ */
+int UART_Write(mxc_uart_regs_t *uart, uint8_t* data, int len);
+
+/**
+ * @brief      Read UART data, <em>blocking</em> until transaction is complete.
+ * @param      uart  Pointer to the UART registers.
+ * @param      data  Pointer to buffer to save the data read.
+ * @param      len   Number of bytes to read.
+ * @param      num   Pointer to store the number of bytes actually read, pass NULL if not needed.
+ *
+ * @return     Number of bytes read, @ref MXC_Error_Codes "error" if
+ *             unsuccessful.
+ */
+int UART_Read(mxc_uart_regs_t *uart, uint8_t* data, int len, int *num);
+/** @} */
+/**
+ * @ingroup uart_async
+ * @{
+ */
+/**
+ * @brief      Asynchronously write/transmit data to the UART.
+ *
+ * @param      uart  Pointer to the UART registers.
+ * @param      req   Request for a UART transaction.
+ * @note       Request struct must remain allocated until callback.
+ *
+ * @return     #E_NO_ERROR Asynchronous write successfully started, @ref
+ *             MXC_Error_Codes "error" if unsuccessful.
+ */
+int UART_WriteAsync(mxc_uart_regs_t *uart, uart_req_t *req);
+
+/**
+ * Asynchronously Read UART data.
+ * @param      uart  Pointer to the UART registers.
+ * @param      req   Pointer to request for a UART transaction.
+ * 
+ * @return     #E_NO_ERROR Asynchronous read successfully started, @ref
+ *             MXC_Error_Codes "error" if unsuccessful.
+ * @note       Request struct must remain allocated until callback function is called.
+ */
+int UART_ReadAsync(mxc_uart_regs_t *uart, uart_req_t *req);
+
+/**
+ * Abort asynchronous request.
+ * @param      req   Pointer to a request for a UART transaction, see #uart_req.
+ * @return     #E_NO_ERROR Asynchronous request aborted successfully, error if unsuccessful.
+ */
+int UART_AbortAsync(uart_req_t *req);
+
+/**
+ * @brief      UART interrupt handler.
+ * @details    This function should be called by the application from the
+ *             interrupt handler if UART interrupts are enabled. Alternately,
+ *             this function can be periodically called by the application if
+ *             UART interrupts are disabled. Only necessary to call this when
+ *             using asynchronous functions.
+ *
+ * @param      uart  Pointer to the UART registers.
+ */
+void UART_Handler(mxc_uart_regs_t *uart);
+
+/**
+ * @brief      Check to see if the UART is busy.
+ *
+ * @param      uart  Pointer to the UART registers.
+ *
+ * @return     #E_NO_ERROR UART is idle.
+ * @return     #E_BUSY UART is in use.
+ */
+int UART_Busy(mxc_uart_regs_t *uart);
+/** @}*/
+/**
+ * @ingroup uart_top
+ * @{
+ */
+/**
+ * @brief      Prepare the UART for entry into a Low-Power mode (LP0/LP1).
+ * @details    Checks for any ongoing transactions. Disables interrupts if the
+ *             UART is idle.
+ *
+ * @param      uart         Pointer to the UART registers.
+ * @return     #E_NO_ERROR  UART is ready to enter Low-Power modes (LP0/LP1).
+ * @return     #E_BUSY      UART is active and busy and not ready to enter a
+ *                          Low-Power mode (LP0/LP1).
+ */
+int UART_PrepForSleep(mxc_uart_regs_t *uart);
+
+/**
+ * @brief      Enables the UART.
+ * @note       This function does not change the existing UART configuration.
+ * @param      uart  Pointer to the UART registers.
+ */
+__STATIC_INLINE void UART_Enable(mxc_uart_regs_t *uart)
+{
+    uart->ctrl |= (MXC_F_UART_CTRL_UART_EN | MXC_F_UART_CTRL_TX_FIFO_EN |
+                   MXC_F_UART_CTRL_RX_FIFO_EN);
+}
+
+/**
+ * @brief      Drains/empties and data in the RX FIFO.
+ * @param      uart  Pointer to the UART registers.
+ */
+__STATIC_INLINE void UART_DrainRX(mxc_uart_regs_t *uart)
+{
+    uint32_t ctrl_save = uart->ctrl;
+    uart->ctrl = (ctrl_save & ~MXC_F_UART_CTRL_RX_FIFO_EN);
+    uart->ctrl = ctrl_save;
+}
+
+/**
+ * @brief      Drains/empties any data in the TX FIFO.
+ * @param      uart  Pointer to the UART registers.
+ */
+__STATIC_INLINE void UART_DrainTX(mxc_uart_regs_t *uart)
+{
+    uint32_t ctrl_save = uart->ctrl;
+    uart->ctrl = (ctrl_save & ~MXC_F_UART_CTRL_TX_FIFO_EN);
+    uart->ctrl = ctrl_save;
+}
+
+/**
+ * @brief      Returns the number of unused bytes available in the UART TX FIFO.
+ * @param      uart  Pointer to the UART registers.
+ * @return     Number of unused bytes in the TX FIFO.
+ */
+__STATIC_INLINE unsigned UART_NumWriteAvail(mxc_uart_regs_t *uart)
+{
+    return (MXC_UART_FIFO_DEPTH - (uart->tx_fifo_ctrl & MXC_F_UART_TX_FIFO_CTRL_FIFO_ENTRY));
+}
+
+/**
+ * @brief      Returns the number of bytes available to be read from the RX
+ *             FIFO.
+ * @param      uart  Pointer to the UART registers.
+ * @return     The number of bytes available to read in the RX FIFO.
+ */
+__STATIC_INLINE unsigned UART_NumReadAvail(mxc_uart_regs_t *uart)
+{
+    return (uart->rx_fifo_ctrl & MXC_F_UART_RX_FIFO_CTRL_FIFO_ENTRY);
+}
+
+/**
+ * @brief      Clear interrupt flags.
+ * @param      uart  Pointer to the UART registers.
+ * @param      mask  Mask of the UART interrupts to clear, see @ref UART_INTFL_Register Register.
+ */
+__STATIC_INLINE void UART_ClearFlags(mxc_uart_regs_t *uart, uint32_t mask)
+{
+    uart->intfl = mask;
+}
+
+/**
+ * @brief      Get interrupt flags.
+ * @param      uart  Pointer to the UART registers.
+ * @return     Mask of active flags.
+ */
+__STATIC_INLINE unsigned UART_GetFlags(mxc_uart_regs_t *uart)
+{
+    return (uart->intfl);
+}
+/** @} */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _UART_H_ */