Diff: targets/TARGET_Maxim/TARGET_MAX32620C/mxc/spim.h

Revision:

186:707f6e361f3e

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Maxim/TARGET_MAX32620C/mxc/spim.h	Fri Jun 22 16:45:37 2018 +0100
@@ -0,0 +1,341 @@
+/**
+ * @file
+ * @brief Registers, Bit Masks and Bit Positions for the SPI Master module.
+ */
+ /* ****************************************************************************
+ * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *
+ * $Date: 2017-02-16 12:03:47 -0600 (Thu, 16 Feb 2017) $
+ * $Revision: 26464 $
+ *
+ **************************************************************************** */
+
+/* **** Includes **** */ 
+#include "mxc_config.h"
+#include "mxc_sys.h"
+#include "spim_regs.h"
+
+/* Define to prevent redundant inclusion */
+#ifndef _SPIM_H_
+#define _SPIM_H_
+ 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @ingroup    periphlibs
+ * @defgroup   spim SPI Master
+ * @brief      Serial Peripheral Interface Master (SPIM) API.
+ * @{
+ */
+
+/* **** Definitions **** */
+
+/** 
+ * Enumeration type for selecting the active levels for the SPI Master Slave Select (SS) lines. 
+ */
+typedef enum {
+    SPIM_SSEL0_HIGH  =    (0x1 << 0), /**<  Slave Select 0 High. */
+    SPIM_SSEL0_LOW   =    0,          /**<  Slave Select 0 Low.  */
+    SPIM_SSEL1_HIGH  =    (0x1 << 1), /**<  Slave Select 1 High. */
+    SPIM_SSEL1_LOW   =    0,          /**<  Slave Select 1 Low.  */
+    SPIM_SSEL2_HIGH  =    (0x1 << 2), /**<  Slave Select 2 High. */
+    SPIM_SSEL2_LOW   =    0,          /**<  Slave Select 2 Low.  */
+    SPIM_SSEL3_HIGH  =    (0x1 << 3), /**<  Slave Select 3 High. */
+    SPIM_SSEL3_LOW   =    0,          /**<  Slave Select 3 Low.  */
+    SPIM_SSEL4_HIGH  =    (0x1 << 4), /**<  Slave Select 4 High. */
+    SPIM_SSEL4_LOW   =    0           /**<  Slave Select 4 Low.  */
+}
+spim_ssel_t;
+
+/** 
+ * Enumeration type for setting the number data lines to use for communication. 
+ */
+typedef enum {
+    SPIM_WIDTH_1 = 0,  /**< 1 Data Line.                        */
+    SPIM_WIDTH_2 = 1,  /**< 2 Data Lines (x2).                  */
+    SPIM_WIDTH_4 = 2   /**< 4 Data Lines (x4).                  */
+} spim_width_t;
+
+/** 
+ * Structure type for configuring a SPIM port. 
+ */
+typedef struct {
+    uint8_t     mode;       /**< SPIM mode selection, 0 to 3.                                           */
+    uint32_t    ssel_pol;   /**< Mask of active levels for the slave select signals, see #spim_ssel_t.  */
+    uint32_t    baud;       /**< Baud rate in Hz.                                                       */
+} spim_cfg_t;
+
+/** 
+ * Structure type representing a SPI Master Transaction request.
+ */
+typedef struct spim_req spim_req_t;
+
+/**
+ * @brief Callback function type used in asynchromous SPIM communications requests.
+ * @details The function declaration for the SPIM callback is:
+ * @code 
+ * void callback(spim_req_t * req, int error_code);
+ * @endcode
+ * |        |                                            |
+ * | -----: | :----------------------------------------- |
+ * | \p req |  Pointer to a #spim_req object representing the active SPIM active transaction. |
+ * | \p error_code | An error code if the active transaction had a failure or #E_NO_ERROR if successful. |
+ * @addtogroup spim_async
+ */
+typedef void (*spim_callback_fn)(spim_req_t * req, int error_code);
+
+/**
+ * @brief      Structure definition for an SPI Master Transaction request.
+ * @note       When using this structure for an asynchronous operation, the
+ *             structure must remain allocated until the callback is completed.
+ * @addtogroup spim_async
+ */
+struct spim_req {
+    uint8_t             ssel;       /**< Number of the Slave Select to use. */
+    uint8_t             deass;      /**< Set to de-assert slave select at the completions of the transaction.*/
+    const uint8_t       *tx_data;   /**< Pointer to a buffer to transmit data from. */
+    uint8_t             *rx_data;   /**< Pointer to a buffer to store data received. */
+    spim_width_t        width;      /**< Number of data lines to use, see #spim_width_t. */
+    unsigned            len;        /**< Number of bytes to send from the \p tx_data buffer. */
+    unsigned            read_num;   /**< Number of bytes read and stored in \p rx_data buffer. */
+    unsigned            write_num;  /**< Number of bytes sent from the \p tx_data buffer, this will be filled by the driver after up to \p len bytes have been transmitted. */
+    spim_callback_fn    callback;   /**< Function pointer to a callback function if desired, NULL otherwise */
+};
+
+/* **** Globals **** */
+
+/* **** Function Prototypes **** */
+
+/**
+ * @brief      Initialize the SPIM peripheral module.
+ *
+ * @param      spim     Pointer to the SPIM register structure.
+ * @param      cfg      Pointer to an SPIM configuration object.
+ * @param      sys_cfg  Pointer to a system configuration object to select the
+ *                      peripheral clock rate and assign the requested GPIO.
+ *
+ * @return     #E_NO_ERROR if the SPIM port is initialized successfully, @ref MXC_Error_Codes
+ *             "error" if unsuccessful.
+ */
+int SPIM_Init(mxc_spim_regs_t *spim, const spim_cfg_t *cfg, const sys_cfg_spim_t *sys_cfg);
+
+/**
+ * @brief      Shutdown the SPIM peripheral module instance represented by the
+ *             @p spim parameter.
+ *
+ * @param      spim  Pointer to the SPIM register structure.
+ *
+ * @return     #E_NO_ERROR if the SPIM is shutdown successfully, @ref
+ *             MXC_Error_Codes "error" if unsuccessful.
+ */
+int SPIM_Shutdown(mxc_spim_regs_t *spim);
+
+/**
+ * @brief      Send Clock cycles on SCK without reading or writing.
+ *
+ * @param      spim   Pointer to the SPIM register structure.
+ * @param      len    Number of clock cycles to send.
+ * @param      ssel   Slave select number.
+ * @param      deass  De-assert slave select at the end of the transaction.
+ *
+ * @return     Cycles transacted if everything is successful, @ref
+ *             MXC_Error_Codes "error" if unsuccessful.
+ */
+int SPIM_Clocks(mxc_spim_regs_t *spim, uint32_t len, uint8_t ssel, uint8_t deass);
+
+/**
+ * @brief      Read/write SPIM data. This function will block until the
+ *             transaction is complete.
+ *
+ * @param      spim  Pointer to the SPIM register structure.
+ * @param      req   Request for a SPIM transaction.
+ * @note       If a callback function is registered it will not be called when using a blocking function.
+ *
+ * @return     Bytes transacted if everything is successful, error if
+ *             unsuccessful.
+ */
+int SPIM_Trans(mxc_spim_regs_t *spim, spim_req_t *req);
+/**
+ * @defgroup spim_async SPIM Asynchrous Functions
+ * @{ 
+ */
+/**
+ * @brief      Asynchronously read/write SPIM data.
+ *
+ * @param      spim  Pointer to the SPIM register structure.
+ * @param      req   Request for a SPIM transaction.
+ * @note       Request struct must remain allocated until callback.
+ *
+ * @return     #E_NO_ERROR if everything is successful, @ref MXC_Error_Codes
+ *             "error" if unsuccessful.
+ */
+int SPIM_TransAsync(mxc_spim_regs_t *spim, spim_req_t *req);
+
+/**
+ * @brief      Abort asynchronous request.
+ *
+ * @param      req   Pointer to a request structure for a SPIM transaction.
+ *
+ * @return     #E_NO_ERROR if request aborted, , @ref MXC_Error_Codes "error" if
+ *             unsuccessful.
+ */
+int SPIM_AbortAsync(spim_req_t *req);
+
+/**
+ * @brief      SPIM interrupt handler.
+ * @details    This function should be called by the application from the
+ *             interrupt handler if SPIM interrupts are enabled. Alternately,
+ *             this function can be periodically polled by the application if
+ *             SPIM interrupts are disabled.
+ *
+ * @param      spim  Base address of the SPIM module.
+ */
+void SPIM_Handler(mxc_spim_regs_t *spim);
+
+/**
+ * @brief      Check the SPIM to see if it's busy.
+ *
+ * @param      spim         Pointer to the SPIM register structure.
+ *
+ * @retval     #E_NO_ERROR  if idle.
+ * @retval     #E_BUSY      if in use.
+ */
+int SPIM_Busy(mxc_spim_regs_t *spim);
+/**@} end of spim_async define group */
+
+/**
+ * @brief      Attempts to prepare the SPIM for Low Power Sleep Modes.
+ * @details    Checks for any ongoing transactions. Disables interrupts if the
+ *             SPIM is idle.
+ *
+ * @param      spim  The spim
+ *
+ * @return     #E_NO_ERROR if ready to sleep.
+ * @return     #E_BUSY if not able to sleep at this time.
+ */
+int SPIM_PrepForSleep(mxc_spim_regs_t *spim);
+
+/**
+ * @brief      Enables the SPIM without overwriting the existing configuration.
+ *
+ * @param      spim  Pointer to the SPIM register structure.
+ */
+__STATIC_INLINE void SPIM_Enable(mxc_spim_regs_t *spim)
+{
+    spim->gen_ctrl |= (MXC_F_SPIM_GEN_CTRL_SPI_MSTR_EN |
+                       MXC_F_SPIM_GEN_CTRL_TX_FIFO_EN | MXC_F_SPIM_GEN_CTRL_RX_FIFO_EN);
+}
+
+/**
+ * @brief      Drains/empties the data in the RX FIFO.
+ *
+ * @param      spim  Pointer to the SPIM register structure.
+ */
+__STATIC_INLINE void SPIM_DrainRX(mxc_spim_regs_t *spim)
+{
+    uint32_t ctrl_save = spim->gen_ctrl;
+    spim->gen_ctrl = (ctrl_save & ~MXC_F_SPIM_GEN_CTRL_RX_FIFO_EN);
+    spim->gen_ctrl = ctrl_save;
+}
+
+/**
+ * @brief      Drains/empties the data in the TX FIFO.
+ *
+ * @param      spim  Pointer to the SPIM register structure.
+ */
+__STATIC_INLINE void SPIM_DrainTX(mxc_spim_regs_t *spim)
+{
+    uint32_t ctrl_save = spim->gen_ctrl;
+    spim->gen_ctrl = (ctrl_save & ~MXC_F_SPIM_GEN_CTRL_TX_FIFO_EN);
+    spim->gen_ctrl = ctrl_save;
+}
+
+/**
+ * @brief      Returns the number of bytes free in the TX FIFO.
+ *
+ * @param      spim  Pointer to the SPIM register structure.
+ *
+ * @return     Number of bytes free in Transmit FIFO.
+ */
+__STATIC_INLINE unsigned SPIM_NumWriteAvail(mxc_spim_regs_t *spim)
+{
+    return (MXC_CFG_SPIM_FIFO_DEPTH - ((spim->fifo_ctrl &
+                                        MXC_F_SPIM_FIFO_CTRL_TX_FIFO_USED) >> MXC_F_SPIM_FIFO_CTRL_TX_FIFO_USED_POS));
+}
+
+/**
+ * @brief      Returns the number of bytes available to read in the RX FIFO.
+ *
+ * @param      spim  Pointer to the SPIM register structure.
+ *
+ * @return     Number of bytes in RX FIFO.
+ */
+__STATIC_INLINE unsigned SPIM_NumReadAvail(mxc_spim_regs_t *spim)
+{
+    return ((spim->fifo_ctrl & MXC_F_SPIM_FIFO_CTRL_RX_FIFO_USED) >>
+            MXC_F_SPIM_FIFO_CTRL_RX_FIFO_USED_POS);
+}
+
+/**
+ * @brief      Clear the SPIM interrupt flags.
+ *
+ * @param      spim  Pointer to the SPIM register structure.
+ * @param      mask  Mask of the SPIM interrupt flags to clear, see @ref
+ *                   SPIM_INTFL_Register Register for the SPIM interrupt flag
+ *                   bit masks.
+ */
+__STATIC_INLINE void SPIM_ClearFlags(mxc_spim_regs_t *spim, uint32_t mask)
+{
+    spim->intfl = mask;
+}
+
+/**
+ * @brief      Read the current SPIM interrupt flags.
+ *
+ * @param      spim  Pointer to the SPIM register structure.
+ *
+ * @return     Mask of currently set SPIM interrupt flags, see @ref
+ *             SPIM_INTFL_Register Register for the SPIM interrupt flag bit
+ *             masks.
+ */
+__STATIC_INLINE unsigned SPIM_GetFlags(mxc_spim_regs_t *spim)
+{
+    return (spim->intfl);
+}
+
+/**@} end of group spim_comm */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _SPIM_H_ */