mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
Diff: targets/TARGET_STM/TARGET_STM32L0/TARGET_STM32L072xZ/TARGET_DISCO_L072CZ_LRWAN1/PinNames.h
- Revision:
- 181:57724642e740
- Child:
- 186:707f6e361f3e
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/TARGET_STM/TARGET_STM32L0/TARGET_STM32L072xZ/TARGET_DISCO_L072CZ_LRWAN1/PinNames.h Fri Feb 16 16:09:33 2018 +0000 @@ -0,0 +1,167 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2017, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" +#include "PinNamesTypes.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + ALT0 = 0x100, + ALT1 = 0x200, + ALT2 = 0x300, + ALT3 = 0x400 +} ALTx; + +typedef enum { + PA_0 = 0x00, + PA_1 = 0x01, + PA_2 = 0x02, + PA_3 = 0x03, + PA_4 = 0x04, + PA_5 = 0x05, + PA_6 = 0x06, + PA_6_ALT0 = PA_6|ALT0, + PA_7 = 0x07, + PA_7_ALT0 = PA_7|ALT0, + PA_8 = 0x08, + PA_9 = 0x09, + PA_10 = 0x0A, + PA_11 = 0x0B, + PA_12 = 0x0C, + PA_13 = 0x0D, + PA_14 = 0x0E, + PA_14_ALT0 = PA_14|ALT0, + PA_15 = 0x0F, + + PB_0 = 0x10, + PB_1 = 0x11, + PB_2 = 0x12, + PB_3 = 0x13, + PB_4 = 0x14, + PB_4_ALT0 = PB_4|ALT0, + PB_5 = 0x15, + PB_5_ALT0 = PB_5|ALT0, + PB_6 = 0x16, + PB_7 = 0x17, + PB_8 = 0x18, + PB_9 = 0x19, + PB_10 = 0x1A, + PB_11 = 0x1B, + PB_12 = 0x1C, + PB_13 = 0x1D, + PB_14 = 0x1E, + PB_15 = 0x1F, + + PC_0 = 0x20, + PC_1 = 0x21, + PC_2 = 0x22, + PC_13 = 0x2D, + + PH_0 = 0x70, + PH_1 = 0x71, + + // ADC internal channels + ADC_TEMP = 0xF0, + ADC_VREF = 0xF1, + ADC_VBAT = 0xF2, + + // Arduino connector namings + A0 = PA_0, + A1 = PA_0, // Alias + A2 = PA_4, + A3 = PA_4, // Alias + A4 = PB_9, // SB11 must be closed + A5 = PB_8, // SB12 must be closed + D0 = PA_3, + D1 = PA_2, + D2 = PA_10, + D3 = PB_13, + D4 = PB_5, + D5 = PB_7, + D6 = PB_2, + D7 = PA_8, + D8 = PA_9, + D9 = PB_12, + D10 = PB_6, + D11 = PB_15, + D12 = PB_14, + D13 = PB_13, // SB2 must be closed + D14 = PB_9, + D15 = PB_8, + + // STDIO for console print +#ifdef MBED_CONF_TARGET_STDIO_UART_TX + STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX, +#else + STDIO_UART_TX = PA_2, +#endif +#ifdef MBED_CONF_TARGET_STDIO_UART_RX + STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX, +#else + STDIO_UART_RX = PA_3, +#endif + + // Generic signals namings + LED1 = PB_5, // Green + LED2 = PA_5, // Red + LED3 = PB_6, // Blue + LED4 = PB_7, // Red + USER_BUTTON = PB_2, + SERIAL_TX = STDIO_UART_TX, + SERIAL_RX = STDIO_UART_RX, + USBTX = STDIO_UART_TX, + USBRX = STDIO_UART_RX, + I2C_SCL = D15, + I2C_SDA = D14, + SPI_MOSI = D11, + SPI_MISO = D12, + SPI_SCK = D13, + SPI_CS = D10, + PWM_OUT = D13, + + //USB pins + USB_DM = PA_11, + USB_DP = PA_12, + USB_NOE = PA_13, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +#ifdef __cplusplus +} +#endif + +#endif