mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

Revision:
149:156823d33999
Parent:
144:ef7eb2e8f9f7
Child:
167:e84263d55307
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F2/device/stm32f2xx_hal_eth.c	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,2051 @@
+/**
+  ******************************************************************************
+  * @file    stm32f2xx_hal_eth.c
+  * @author  MCD Application Team
+  * @version V1.1.3
+  * @date    29-June-2016
+  * @brief   ETH HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Ethernet (ETH) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State and Errors functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      (#)Declare a ETH_HandleTypeDef handle structure, for example:
+         ETH_HandleTypeDef  heth;
+        
+      (#)Fill parameters of Init structure in heth handle
+  
+      (#)Call HAL_ETH_Init() API to initialize the Ethernet peripheral (MAC, DMA, ...) 
+
+      (#)Initialize the ETH low level resources through the HAL_ETH_MspInit() API:
+          (##) Enable the Ethernet interface clock using 
+               (+++) __HAL_RCC_ETHMAC_CLK_ENABLE();
+               (+++) __HAL_RCC_ETHMACTX_CLK_ENABLE();
+               (+++) __HAL_RCC_ETHMACRX_CLK_ENABLE();
+           
+          (##) Initialize the related GPIO clocks
+          (##) Configure Ethernet pin-out
+          (##) Configure Ethernet NVIC interrupt (IT mode)   
+    
+      (#)Initialize Ethernet DMA Descriptors in chain mode and point to allocated buffers:
+          (##) HAL_ETH_DMATxDescListInit(); for Transmission process
+          (##) HAL_ETH_DMARxDescListInit(); for Reception process
+
+      (#)Enable MAC and DMA transmission and reception:
+          (##) HAL_ETH_Start();
+
+      (#)Prepare ETH DMA TX Descriptors and give the hand to ETH DMA to transfer 
+         the frame to MAC TX FIFO:
+         (##) HAL_ETH_TransmitFrame();
+
+      (#)Poll for a received frame in ETH RX DMA Descriptors and get received 
+         frame parameters
+         (##) HAL_ETH_GetReceivedFrame(); (should be called into an infinite loop)
+
+      (#) Get a received frame when an ETH RX interrupt occurs:
+         (##) HAL_ETH_GetReceivedFrame_IT(); (called in IT mode only)
+
+      (#) Communicate with external PHY device:
+         (##) Read a specific register from the PHY  
+              HAL_ETH_ReadPHYRegister();
+         (##) Write data to a specific RHY register:
+              HAL_ETH_WritePHYRegister();
+
+      (#) Configure the Ethernet MAC after ETH peripheral initialization
+          HAL_ETH_ConfigMAC(); all MAC parameters should be filled.
+      
+      (#) Configure the Ethernet DMA after ETH peripheral initialization
+          HAL_ETH_ConfigDMA(); all DMA parameters should be filled.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f2xx_hal.h"
+
+/** @addtogroup STM32F2xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup ETH ETH 
+  * @brief ETH HAL module driver
+  * @{
+  */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+
+#if defined(STM32F207xx) || defined(STM32F217xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup ETH_Private_Constants ETH Private Constants
+  * @{
+  */
+#define ETH_TIMEOUT_SWRESET                 ((uint32_t)500U)  
+#define ETH_TIMEOUT_LINKED_STATE           ((uint32_t)5000U)  
+#define ETH_TIMEOUT_AUTONEGO_COMPLETED     ((uint32_t)5000U)
+
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup ETH_Private_Functions ETH Private Functions
+  * @{
+  */
+static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err);
+static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr);
+static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth);
+static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth);
+static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth);
+static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth);
+static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth);
+static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth);
+static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth);
+static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth);
+static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth);
+static void ETH_Delay(uint32_t mdelay);
+
+/**
+  * @}
+  */
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup ETH_Exported_Functions ETH Exported Functions
+  * @{
+  */
+
+/** @defgroup ETH_Exported_Functions_Group1 Initialization and de-initialization functions 
+  *  @brief   Initialization and Configuration functions 
+  *
+  @verbatim    
+  ===============================================================================
+            ##### Initialization and de-initialization functions #####
+  ===============================================================================
+  [..]  This section provides functions allowing to:
+      (+) Initialize and configure the Ethernet peripheral
+      (+) De-initialize the Ethernet peripheral
+
+  @endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the Ethernet MAC and DMA according to default
+  *         parameters.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth)
+{
+  uint32_t tmpreg1 = 0U, phyreg = 0U;
+  uint32_t hclk = 60000000U;
+  uint32_t tickstart = 0U;
+  uint32_t err = ETH_SUCCESS;
+  
+  /* Check the ETH peripheral state */
+  if(heth == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check parameters */
+  assert_param(IS_ETH_AUTONEGOTIATION(heth->Init.AutoNegotiation));
+  assert_param(IS_ETH_RX_MODE(heth->Init.RxMode));
+  assert_param(IS_ETH_CHECKSUM_MODE(heth->Init.ChecksumMode));
+  assert_param(IS_ETH_MEDIA_INTERFACE(heth->Init.MediaInterface));  
+  
+  if(heth->State == HAL_ETH_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    heth->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, NVIC. */
+    HAL_ETH_MspInit(heth);
+  }
+  
+  /* Enable SYSCFG Clock */
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+  
+  /* Select MII or RMII Mode*/
+  SYSCFG->PMC &= ~(SYSCFG_PMC_MII_RMII_SEL);
+  SYSCFG->PMC |= (uint32_t)heth->Init.MediaInterface;
+  
+  /* Ethernet Software reset */
+  /* Set the SWR bit: resets all MAC subsystem internal registers and logic */
+  /* After reset all the registers holds their respective reset values */
+  (heth->Instance)->DMABMR |= ETH_DMABMR_SR;
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  /* Wait for software reset */
+  while (((heth->Instance)->DMABMR & ETH_DMABMR_SR) != (uint32_t)RESET)
+  {
+    /* Check for the Timeout */
+    if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_SWRESET)
+    {     
+      heth->State= HAL_ETH_STATE_TIMEOUT;
+  
+      /* Process Unlocked */
+      __HAL_UNLOCK(heth);
+    
+      /* Note: The SWR is not performed if the ETH_RX_CLK or the ETH_TX_CLK are  
+         not available, please check your external PHY or the IO configuration */
+      return HAL_TIMEOUT;
+    }
+  }
+  
+  /*-------------------------------- MAC Initialization ----------------------*/
+  /* Get the ETHERNET MACMIIAR value */
+  tmpreg1 = (heth->Instance)->MACMIIAR;
+  /* Clear CSR Clock Range CR[2:0] bits */
+  tmpreg1 &= ETH_MACMIIAR_CR_MASK;
+  
+  /* Get hclk frequency value */
+  hclk = HAL_RCC_GetHCLKFreq();
+  
+  /* Set CR bits depending on hclk value */
+  if((hclk >= 20000000U)&&(hclk < 35000000U))
+  {
+    /* CSR Clock Range between 20-35 MHz */
+    tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div16;
+  }
+  else if((hclk >= 35000000U)&&(hclk < 60000000U))
+  {
+    /* CSR Clock Range between 35-60 MHz */ 
+    tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div26;
+  }  
+  else if((hclk >= 60000000U)&&(hclk < 100000000U))
+  {
+    /* CSR Clock Range between 60-100 MHz */ 
+    tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div42;
+  }  
+  else /* ((hclk >= 100000000)&&(hclk < 120000000)) */
+  {
+    /* CSR Clock Range between 100-120 MHz */ 
+    tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div62;
+  }
+  
+  /* Write to ETHERNET MAC MIIAR: Configure the ETHERNET CSR Clock Range */
+  (heth->Instance)->MACMIIAR = (uint32_t)tmpreg1;
+  
+  /*-------------------- PHY initialization and configuration ----------------*/
+  /* Put the PHY in reset mode */
+  if((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_RESET)) != HAL_OK)
+  {
+    /* In case of write timeout */
+    err = ETH_ERROR;
+    
+    /* Config MAC and DMA */
+    ETH_MACDMAConfig(heth, err);
+    
+    /* Set the ETH peripheral state to READY */
+    heth->State = HAL_ETH_STATE_READY;
+    
+    /* Return HAL_ERROR */
+    return HAL_ERROR;
+  }
+  
+  /* Delay to assure PHY reset */
+  HAL_Delay(PHY_RESET_DELAY);
+  
+  if((heth->Init).AutoNegotiation != ETH_AUTONEGOTIATION_DISABLE)
+  {
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    
+    /* We wait for linked status */
+    do
+    {
+      HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg);
+      
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_LINKED_STATE)
+      {
+        /* In case of write timeout */
+        err = ETH_ERROR;
+      
+        /* Config MAC and DMA */
+        ETH_MACDMAConfig(heth, err);
+        
+        heth->State= HAL_ETH_STATE_READY;
+  
+        /* Process Unlocked */
+        __HAL_UNLOCK(heth);
+    
+        return HAL_TIMEOUT;
+      }
+    } while (((phyreg & PHY_LINKED_STATUS) != PHY_LINKED_STATUS));
+
+    
+    /* Enable Auto-Negotiation */
+    if((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_AUTONEGOTIATION)) != HAL_OK)
+    {
+      /* In case of write timeout */
+      err = ETH_ERROR;
+      
+      /* Config MAC and DMA */
+      ETH_MACDMAConfig(heth, err);
+      
+      /* Set the ETH peripheral state to READY */
+      heth->State = HAL_ETH_STATE_READY;
+      
+      /* Return HAL_ERROR */
+      return HAL_ERROR;   
+    }
+    
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    
+    /* Wait until the auto-negotiation will be completed */
+    do
+    {
+      HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg);
+      
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_AUTONEGO_COMPLETED)
+      {
+        /* In case of write timeout */
+        err = ETH_ERROR;
+      
+        /* Config MAC and DMA */
+        ETH_MACDMAConfig(heth, err);
+        
+        heth->State= HAL_ETH_STATE_READY;
+  
+        /* Process Unlocked */
+        __HAL_UNLOCK(heth);
+    
+        return HAL_TIMEOUT;
+      }
+      
+    } while (((phyreg & PHY_AUTONEGO_COMPLETE) != PHY_AUTONEGO_COMPLETE));
+    
+    /* Read the result of the auto-negotiation */
+    if((HAL_ETH_ReadPHYRegister(heth, PHY_SR, &phyreg)) != HAL_OK)
+    {
+      /* In case of write timeout */
+      err = ETH_ERROR;
+      
+      /* Config MAC and DMA */
+      ETH_MACDMAConfig(heth, err);
+      
+      /* Set the ETH peripheral state to READY */
+      heth->State = HAL_ETH_STATE_READY;
+      
+      /* Return HAL_ERROR */
+      return HAL_ERROR;   
+    }
+    
+    /* Configure the MAC with the Duplex Mode fixed by the auto-negotiation process */
+    if((phyreg & PHY_DUPLEX_STATUS) != (uint32_t)RESET)
+    {
+      /* Set Ethernet duplex mode to Full-duplex following the auto-negotiation */
+      (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX;  
+    }
+    else
+    {
+      /* Set Ethernet duplex mode to Half-duplex following the auto-negotiation */
+      (heth->Init).DuplexMode = ETH_MODE_HALFDUPLEX;           
+    }
+    /* Configure the MAC with the speed fixed by the auto-negotiation process */
+    if((phyreg & PHY_SPEED_STATUS) == PHY_SPEED_STATUS)
+    {  
+      /* Set Ethernet speed to 10M following the auto-negotiation */
+      (heth->Init).Speed = ETH_SPEED_10M; 
+    }
+    else
+    {   
+      /* Set Ethernet speed to 100M following the auto-negotiation */ 
+      (heth->Init).Speed = ETH_SPEED_100M;
+    }
+  }
+  else /* AutoNegotiation Disable */
+  {
+    /* Check parameters */
+    assert_param(IS_ETH_SPEED(heth->Init.Speed));
+    assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode));
+    
+    /* Set MAC Speed and Duplex Mode */
+    if(HAL_ETH_WritePHYRegister(heth, PHY_BCR, ((uint16_t)((heth->Init).DuplexMode >> 3) |
+                                                (uint16_t)((heth->Init).Speed >> 1))) != HAL_OK)
+    {
+      /* In case of write timeout */
+      err = ETH_ERROR;
+      
+      /* Config MAC and DMA */
+      ETH_MACDMAConfig(heth, err);
+      
+      /* Set the ETH peripheral state to READY */
+      heth->State = HAL_ETH_STATE_READY;
+      
+      /* Return HAL_ERROR */
+      return HAL_ERROR;
+    }  
+    
+    /* Delay to assure PHY configuration */
+    HAL_Delay(PHY_CONFIG_DELAY);
+  }
+  
+  /* Config MAC and DMA */
+  ETH_MACDMAConfig(heth, err);
+  
+  /* Set ETH HAL State to Ready */
+  heth->State= HAL_ETH_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  De-Initializes the ETH peripheral. 
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth)
+{
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  /* De-Init the low level hardware : GPIO, CLOCK, NVIC. */
+  HAL_ETH_MspDeInit(heth);
+  
+  /* Set ETH HAL state to Disabled */
+  heth->State= HAL_ETH_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(heth);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the DMA Tx descriptors in chain mode.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module  
+  * @param  DMATxDescTab: Pointer to the first Tx desc list 
+  * @param  TxBuff: Pointer to the first TxBuffer list
+  * @param  TxBuffCount: Number of the used Tx desc in the list
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t *TxBuff, uint32_t TxBuffCount)
+{
+  uint32_t i = 0U;
+  ETH_DMADescTypeDef *dmatxdesc;
+  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  /* Set the DMATxDescToSet pointer with the first one of the DMATxDescTab list */
+  heth->TxDesc = DMATxDescTab;
+  
+  /* Fill each DMATxDesc descriptor with the right values */   
+  for(i=0U; i < TxBuffCount; i++)
+  {
+    /* Get the pointer on the ith member of the Tx Desc list */
+    dmatxdesc = DMATxDescTab + i;
+    
+    /* Set Second Address Chained bit */
+    dmatxdesc->Status = ETH_DMATXDESC_TCH;  
+    
+    /* Set Buffer1 address pointer */
+    dmatxdesc->Buffer1Addr = (uint32_t)(&TxBuff[i*ETH_TX_BUF_SIZE]);
+    
+    if ((heth->Init).ChecksumMode == ETH_CHECKSUM_BY_HARDWARE)
+    {
+      /* Set the DMA Tx descriptors checksum insertion */
+      dmatxdesc->Status |= ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL;
+    }
+    
+    /* Initialize the next descriptor with the Next Descriptor Polling Enable */
+    if(i < (TxBuffCount-1))
+    {
+      /* Set next descriptor address register with next descriptor base address */
+      dmatxdesc->Buffer2NextDescAddr = (uint32_t)(DMATxDescTab+i+1);
+    }
+    else
+    {
+      /* For last descriptor, set next descriptor address register equal to the first descriptor base address */ 
+      dmatxdesc->Buffer2NextDescAddr = (uint32_t) DMATxDescTab;  
+    }
+  }
+  
+  /* Set Transmit Descriptor List Address Register */
+  (heth->Instance)->DMATDLAR = (uint32_t) DMATxDescTab;
+  
+  /* Set ETH HAL State to Ready */
+  heth->State= HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the DMA Rx descriptors in chain mode.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module  
+  * @param  DMARxDescTab: Pointer to the first Rx desc list 
+  * @param  RxBuff: Pointer to the first RxBuffer list
+  * @param  RxBuffCount: Number of the used Rx desc in the list
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount)
+{
+  uint32_t i = 0U;
+  ETH_DMADescTypeDef *DMARxDesc;
+  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  /* Set the Ethernet RxDesc pointer with the first one of the DMARxDescTab list */
+  heth->RxDesc = DMARxDescTab; 
+  
+  /* Fill each DMARxDesc descriptor with the right values */
+  for(i=0U; i < RxBuffCount; i++)
+  {
+    /* Get the pointer on the ith member of the Rx Desc list */
+    DMARxDesc = DMARxDescTab+i;
+    
+    /* Set Own bit of the Rx descriptor Status */
+    DMARxDesc->Status = ETH_DMARXDESC_OWN;
+    
+    /* Set Buffer1 size and Second Address Chained bit */
+    DMARxDesc->ControlBufferSize = ETH_DMARXDESC_RCH | ETH_RX_BUF_SIZE;  
+    
+    /* Set Buffer1 address pointer */
+    DMARxDesc->Buffer1Addr = (uint32_t)(&RxBuff[i*ETH_RX_BUF_SIZE]);
+    
+    if((heth->Init).RxMode == ETH_RXINTERRUPT_MODE)
+    {
+      /* Enable Ethernet DMA Rx Descriptor interrupt */
+      DMARxDesc->ControlBufferSize &= ~ETH_DMARXDESC_DIC;
+    }
+    
+    /* Initialize the next descriptor with the Next Descriptor Polling Enable */
+    if(i < (RxBuffCount-1U))
+    {
+      /* Set next descriptor address register with next descriptor base address */
+      DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab+i+1); 
+    }
+    else
+    {
+      /* For last descriptor, set next descriptor address register equal to the first descriptor base address */ 
+      DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab); 
+    }
+  }
+  
+  /* Set Receive Descriptor List Address Register */
+  (heth->Instance)->DMARDLAR = (uint32_t) DMARxDescTab;
+  
+  /* Set ETH HAL State to Ready */
+  heth->State= HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the ETH MSP.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_MspInit(ETH_HandleTypeDef *heth)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(heth);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_MspInit could be implemented in the user file
+  */
+}
+
+/**
+  * @brief  DeInitializes ETH MSP.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(heth);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_MspDeInit could be implemented in the user file
+  */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Exported_Functions_Group2 IO operation functions 
+  *  @brief   Data transfers functions 
+  *
+  @verbatim   
+  ==============================================================================
+                          ##### IO operation functions #####
+  ==============================================================================  
+  [..]  This section provides functions allowing to:
+        (+) Transmit a frame
+            HAL_ETH_TransmitFrame();
+        (+) Receive a frame
+            HAL_ETH_GetReceivedFrame();
+            HAL_ETH_GetReceivedFrame_IT();
+        (+) Read from an External PHY register
+            HAL_ETH_ReadPHYRegister();
+        (+) Write to an External PHY register
+            HAL_ETH_WritePHYRegister();
+
+  @endverbatim
+  
+  * @{
+  */
+
+/**
+  * @brief  Sends an Ethernet frame. 
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  FrameLength: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength)
+{
+  uint32_t bufcount = 0U, size = 0U, i = 0U;
+  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  if (FrameLength == 0U) 
+  {
+    /* Set ETH HAL state to READY */
+    heth->State = HAL_ETH_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+    
+    return  HAL_ERROR;                                    
+  }  
+  
+  /* Check if the descriptor is owned by the ETHERNET DMA (when set) or CPU (when reset) */
+  if(((heth->TxDesc)->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET)
+  {  
+    /* OWN bit set */
+    heth->State = HAL_ETH_STATE_BUSY_TX;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+    
+    return HAL_ERROR;
+  }
+  
+  /* Get the number of needed Tx buffers for the current frame */
+  if (FrameLength > ETH_TX_BUF_SIZE)
+  {
+    bufcount = FrameLength/ETH_TX_BUF_SIZE;
+    if (FrameLength % ETH_TX_BUF_SIZE) 
+    {
+      bufcount++;
+    }
+  }
+  else 
+  {  
+    bufcount = 1U;
+  }
+  if (bufcount == 1U)
+  {
+    /* Set LAST and FIRST segment */
+    heth->TxDesc->Status |=ETH_DMATXDESC_FS|ETH_DMATXDESC_LS;
+    /* Set frame size */
+    heth->TxDesc->ControlBufferSize = (FrameLength & ETH_DMATXDESC_TBS1);
+    /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */
+    heth->TxDesc->Status |= ETH_DMATXDESC_OWN;
+    /* Point to next descriptor */
+    heth->TxDesc= (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr);
+  }
+  else
+  {
+    for (i=0U; i< bufcount; i++)
+    {
+      /* Clear FIRST and LAST segment bits */
+      heth->TxDesc->Status &= ~(ETH_DMATXDESC_FS | ETH_DMATXDESC_LS);
+      
+      if (i == 0U) 
+      {
+        /* Setting the first segment bit */
+        heth->TxDesc->Status |= ETH_DMATXDESC_FS;  
+      }
+      
+      /* Program size */
+      heth->TxDesc->ControlBufferSize = (ETH_TX_BUF_SIZE & ETH_DMATXDESC_TBS1);
+      
+      if (i == (bufcount-1U))
+      {
+        /* Setting the last segment bit */
+        heth->TxDesc->Status |= ETH_DMATXDESC_LS;
+        size = FrameLength - (bufcount-1U)*ETH_TX_BUF_SIZE;
+        heth->TxDesc->ControlBufferSize = (size & ETH_DMATXDESC_TBS1);
+      }
+      
+      /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */
+      heth->TxDesc->Status |= ETH_DMATXDESC_OWN;
+      /* point to next descriptor */
+      heth->TxDesc = (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr);
+    }
+  }
+  
+  /* When Tx Buffer unavailable flag is set: clear it and resume transmission */
+  if (((heth->Instance)->DMASR & ETH_DMASR_TBUS) != (uint32_t)RESET)
+  {
+    /* Clear TBUS ETHERNET DMA flag */
+    (heth->Instance)->DMASR = ETH_DMASR_TBUS;
+    /* Resume DMA transmission*/
+    (heth->Instance)->DMATPDR = 0U;
+  }
+  
+  /* Set ETH HAL State to Ready */
+  heth->State = HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Checks for received frames. 
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth)
+{
+  uint32_t framelength = 0U;
+  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Check the ETH state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  /* Check if segment is not owned by DMA */
+  /* (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET)) */
+  if(((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET))
+  {
+    /* Check if last segment */
+    if(((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET)) 
+    {
+      /* increment segment count */
+      (heth->RxFrameInfos).SegCount++;
+      
+      /* Check if last segment is first segment: one segment contains the frame */
+      if ((heth->RxFrameInfos).SegCount == 1U)
+      {
+        (heth->RxFrameInfos).FSRxDesc =heth->RxDesc;
+      }
+      
+      heth->RxFrameInfos.LSRxDesc = heth->RxDesc;
+      
+      /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */
+      framelength = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4U;
+      heth->RxFrameInfos.length = framelength;
+      
+      /* Get the address of the buffer start address */
+      heth->RxFrameInfos.buffer = ((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr;
+      /* point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*) ((heth->RxDesc)->Buffer2NextDescAddr);
+      
+      /* Set HAL State to Ready */
+      heth->State = HAL_ETH_STATE_READY;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(heth);
+      
+      /* Return function status */
+      return HAL_OK;
+    }
+    /* Check if first segment */
+    else if((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET)
+    {
+      (heth->RxFrameInfos).FSRxDesc = heth->RxDesc;
+      (heth->RxFrameInfos).LSRxDesc = NULL;
+      (heth->RxFrameInfos).SegCount = 1U;
+      /* Point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+    }
+    /* Check if intermediate segment */ 
+    else
+    {
+      (heth->RxFrameInfos).SegCount++;
+      /* Point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+    } 
+  }
+  
+  /* Set ETH HAL State to Ready */
+  heth->State = HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  Gets the Received frame in interrupt mode. 
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth)
+{
+  uint32_t descriptorscancounter = 0U;
+  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set ETH HAL State to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  /* Scan descriptors owned by CPU */
+  while (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && (descriptorscancounter < ETH_RXBUFNB))
+  {
+    /* Just for security */
+    descriptorscancounter++;
+    
+    /* Check if first segment in frame */
+    /* ((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)) */  
+    if((heth->RxDesc->Status & (ETH_DMARXDESC_FS | ETH_DMARXDESC_LS)) == (uint32_t)ETH_DMARXDESC_FS)
+    { 
+      heth->RxFrameInfos.FSRxDesc = heth->RxDesc;
+      heth->RxFrameInfos.SegCount = 1U;   
+      /* Point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+    }
+    /* Check if intermediate segment */
+    /* ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)&& ((heth->RxDesc->Status & ETH_DMARXDESC_FS) == (uint32_t)RESET)) */
+    else if ((heth->RxDesc->Status & (ETH_DMARXDESC_LS | ETH_DMARXDESC_FS)) == (uint32_t)RESET)
+    {
+      /* Increment segment count */
+      (heth->RxFrameInfos.SegCount)++;
+      /* Point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*)(heth->RxDesc->Buffer2NextDescAddr);
+    }
+    /* Should be last segment */
+    else
+    { 
+      /* Last segment */
+      heth->RxFrameInfos.LSRxDesc = heth->RxDesc;
+      
+      /* Increment segment count */
+      (heth->RxFrameInfos.SegCount)++;
+      
+      /* Check if last segment is first segment: one segment contains the frame */
+      if ((heth->RxFrameInfos.SegCount) == 1U)
+      {
+        heth->RxFrameInfos.FSRxDesc = heth->RxDesc;
+      }
+      
+      /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */
+      heth->RxFrameInfos.length = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4U;
+      
+      /* Get the address of the buffer start address */ 
+      heth->RxFrameInfos.buffer =((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr;
+      
+      /* Point to next descriptor */      
+      heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+      
+      /* Set HAL State to Ready */
+      heth->State = HAL_ETH_STATE_READY;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(heth);
+  
+      /* Return function status */
+      return HAL_OK;
+    }
+  }
+
+  /* Set HAL State to Ready */
+  heth->State = HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  This function handles ETH interrupt request.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth)
+{
+  /* Frame received */
+  if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_R)) 
+  {
+    /* Receive complete callback */
+    HAL_ETH_RxCpltCallback(heth);
+    
+     /* Clear the Eth DMA Rx IT pending bits */
+    __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_R);
+
+    /* Set HAL State to Ready */
+    heth->State = HAL_ETH_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+
+  }
+  /* Frame transmitted */
+  else if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_T)) 
+  {
+    /* Transfer complete callback */
+    HAL_ETH_TxCpltCallback(heth);
+    
+    /* Clear the Eth DMA Tx IT pending bits */
+    __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_T);
+
+    /* Set HAL State to Ready */
+    heth->State = HAL_ETH_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+  }
+  
+  /* Clear the interrupt flags */
+  __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_NIS);
+  
+  /* ETH DMA Error */
+  if(__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_AIS))
+  {
+    /* Ethernet Error callback */
+    HAL_ETH_ErrorCallback(heth);
+
+    /* Clear the interrupt flags */
+    __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_FLAG_AIS);
+  
+    /* Set HAL State to Ready */
+    heth->State = HAL_ETH_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+  }
+}
+
+/**
+  * @brief  Tx Transfer completed callbacks.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(heth);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_TxCpltCallback could be implemented in the user file
+  */ 
+}
+
+/**
+  * @brief  Rx Transfer completed callbacks.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(heth);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_TxCpltCallback could be implemented in the user file
+  */ 
+}
+
+/**
+  * @brief  Ethernet transfer error callbacks
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(heth);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_TxCpltCallback could be implemented in the user file
+  */ 
+}
+
+/**
+  * @brief  Reads a PHY register
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module                  
+  * @param PHYReg: PHY register address, is the index of one of the 32 PHY register. 
+  *                This parameter can be one of the following values: 
+  *                   PHY_BCR: Transceiver Basic Control Register, 
+  *                   PHY_BSR: Transceiver Basic Status Register.   
+  *                   More PHY register could be read depending on the used PHY
+  * @param RegValue: PHY register value                  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue)
+{
+  uint32_t tmpreg1 = 0U;     
+  uint32_t tickstart = 0U;
+  
+  /* Check parameters */
+  assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress));
+  
+  /* Check the ETH peripheral state */
+  if(heth->State == HAL_ETH_STATE_BUSY_RD)
+  {
+    return HAL_BUSY;
+  }
+  /* Set ETH HAL State to BUSY_RD */
+  heth->State = HAL_ETH_STATE_BUSY_RD;
+  
+  /* Get the ETHERNET MACMIIAR value */
+  tmpreg1 = heth->Instance->MACMIIAR;
+  
+  /* Keep only the CSR Clock Range CR[2:0] bits value */
+  tmpreg1 &= ~ETH_MACMIIAR_CR_MASK;
+  
+  /* Prepare the MII address register value */
+  tmpreg1 |=(((uint32_t)heth->Init.PhyAddress << 11U) & ETH_MACMIIAR_PA); /* Set the PHY device address   */
+  tmpreg1 |=(((uint32_t)PHYReg<<6U) & ETH_MACMIIAR_MR);                   /* Set the PHY register address */
+  tmpreg1 &= ~ETH_MACMIIAR_MW;                                            /* Set the read mode            */
+  tmpreg1 |= ETH_MACMIIAR_MB;                                             /* Set the MII Busy bit         */
+  
+  /* Write the result value into the MII Address register */
+  heth->Instance->MACMIIAR = tmpreg1;
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  /* Check for the Busy flag */
+  while((tmpreg1 & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB)
+  {
+    /* Check for the Timeout */
+    if((HAL_GetTick() - tickstart ) > PHY_READ_TO)
+    {
+      heth->State= HAL_ETH_STATE_READY;
+  
+      /* Process Unlocked */
+      __HAL_UNLOCK(heth);
+    
+      return HAL_TIMEOUT;
+    }
+    
+    tmpreg1 = heth->Instance->MACMIIAR;
+  }
+  
+  /* Get MACMIIDR value */
+  *RegValue = (uint16_t)(heth->Instance->MACMIIDR);
+  
+  /* Set ETH HAL State to READY */
+  heth->State = HAL_ETH_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Writes to a PHY register.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module  
+  * @param  PHYReg: PHY register address, is the index of one of the 32 PHY register. 
+  *          This parameter can be one of the following values: 
+  *             PHY_BCR: Transceiver Control Register.  
+  *             More PHY register could be written depending on the used PHY
+  * @param  RegValue: the value to write
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue)
+{
+  uint32_t tmpreg1 = 0U;
+  uint32_t tickstart = 0U;
+  
+  /* Check parameters */
+  assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress));
+  
+  /* Check the ETH peripheral state */
+  if(heth->State == HAL_ETH_STATE_BUSY_WR)
+  {
+    return HAL_BUSY;
+  }
+  /* Set ETH HAL State to BUSY_WR */
+  heth->State = HAL_ETH_STATE_BUSY_WR;
+  
+  /* Get the ETHERNET MACMIIAR value */
+  tmpreg1 = heth->Instance->MACMIIAR;
+  
+  /* Keep only the CSR Clock Range CR[2:0] bits value */
+  tmpreg1 &= ~ETH_MACMIIAR_CR_MASK;
+  
+  /* Prepare the MII register address value */
+  tmpreg1 |=(((uint32_t)heth->Init.PhyAddress<<11U) & ETH_MACMIIAR_PA); /* Set the PHY device address */
+  tmpreg1 |=(((uint32_t)PHYReg<<6U) & ETH_MACMIIAR_MR);                 /* Set the PHY register address */
+  tmpreg1 |= ETH_MACMIIAR_MW;                                           /* Set the write mode */
+  tmpreg1 |= ETH_MACMIIAR_MB;                                           /* Set the MII Busy bit */
+  
+  /* Give the value to the MII data register */
+  heth->Instance->MACMIIDR = (uint16_t)RegValue;
+  
+  /* Write the result value into the MII Address register */
+  heth->Instance->MACMIIAR = tmpreg1;
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  /* Check for the Busy flag */
+  while((tmpreg1 & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB)
+  {
+    /* Check for the Timeout */
+    if((HAL_GetTick() - tickstart ) > PHY_WRITE_TO)
+    {
+      heth->State= HAL_ETH_STATE_READY;
+  
+      /* Process Unlocked */
+      __HAL_UNLOCK(heth);
+    
+      return HAL_TIMEOUT;
+    }
+    
+    tmpreg1 = heth->Instance->MACMIIAR;
+  }
+  
+  /* Set ETH HAL State to READY */
+  heth->State = HAL_ETH_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK; 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief    Peripheral Control functions 
+ *
+@verbatim   
+ ===============================================================================
+                  ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Enable MAC and DMA transmission and reception.
+          HAL_ETH_Start();
+      (+) Disable MAC and DMA transmission and reception. 
+          HAL_ETH_Stop();
+      (+) Set the MAC configuration in runtime mode
+          HAL_ETH_ConfigMAC();
+      (+) Set the DMA configuration in runtime mode
+          HAL_ETH_ConfigDMA();
+
+@endverbatim
+  * @{
+  */ 
+
+ /**
+  * @brief  Enables Ethernet MAC and DMA reception/transmission 
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth)
+{  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  /* Enable transmit state machine of the MAC for transmission on the MII */
+  ETH_MACTransmissionEnable(heth);
+  
+  /* Enable receive state machine of the MAC for reception from the MII */
+  ETH_MACReceptionEnable(heth);
+  
+  /* Flush Transmit FIFO */
+  ETH_FlushTransmitFIFO(heth);
+  
+  /* Start DMA transmission */
+  ETH_DMATransmissionEnable(heth);
+  
+  /* Start DMA reception */
+  ETH_DMAReceptionEnable(heth);
+  
+  /* Set the ETH state to READY*/
+  heth->State= HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop Ethernet MAC and DMA reception/transmission 
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth)
+{  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  /* Stop DMA transmission */
+  ETH_DMATransmissionDisable(heth);
+  
+  /* Stop DMA reception */
+  ETH_DMAReceptionDisable(heth);
+  
+  /* Disable receive state machine of the MAC for reception from the MII */
+  ETH_MACReceptionDisable(heth);
+  
+  /* Flush Transmit FIFO */
+  ETH_FlushTransmitFIFO(heth);
+  
+  /* Disable transmit state machine of the MAC for transmission on the MII */
+  ETH_MACTransmissionDisable(heth);
+  
+  /* Set the ETH state*/
+  heth->State = HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set ETH MAC Configuration.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  macconf: MAC Configuration structure  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf)
+{
+  uint32_t tmpreg1 = 0U;
+  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set the ETH peripheral state to BUSY */
+  heth->State= HAL_ETH_STATE_BUSY;
+  
+  assert_param(IS_ETH_SPEED(heth->Init.Speed));
+  assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode)); 
+  
+  if (macconf != NULL)
+  {
+    /* Check the parameters */
+    assert_param(IS_ETH_WATCHDOG(macconf->Watchdog));
+    assert_param(IS_ETH_JABBER(macconf->Jabber));
+    assert_param(IS_ETH_INTER_FRAME_GAP(macconf->InterFrameGap));
+    assert_param(IS_ETH_CARRIER_SENSE(macconf->CarrierSense));
+    assert_param(IS_ETH_RECEIVE_OWN(macconf->ReceiveOwn));
+    assert_param(IS_ETH_LOOPBACK_MODE(macconf->LoopbackMode));
+    assert_param(IS_ETH_CHECKSUM_OFFLOAD(macconf->ChecksumOffload));
+    assert_param(IS_ETH_RETRY_TRANSMISSION(macconf->RetryTransmission));
+    assert_param(IS_ETH_AUTOMATIC_PADCRC_STRIP(macconf->AutomaticPadCRCStrip));
+    assert_param(IS_ETH_BACKOFF_LIMIT(macconf->BackOffLimit));
+    assert_param(IS_ETH_DEFERRAL_CHECK(macconf->DeferralCheck));
+    assert_param(IS_ETH_RECEIVE_ALL(macconf->ReceiveAll));
+    assert_param(IS_ETH_SOURCE_ADDR_FILTER(macconf->SourceAddrFilter));
+    assert_param(IS_ETH_CONTROL_FRAMES(macconf->PassControlFrames));
+    assert_param(IS_ETH_BROADCAST_FRAMES_RECEPTION(macconf->BroadcastFramesReception));
+    assert_param(IS_ETH_DESTINATION_ADDR_FILTER(macconf->DestinationAddrFilter));
+    assert_param(IS_ETH_PROMISCUOUS_MODE(macconf->PromiscuousMode));
+    assert_param(IS_ETH_MULTICAST_FRAMES_FILTER(macconf->MulticastFramesFilter));
+    assert_param(IS_ETH_UNICAST_FRAMES_FILTER(macconf->UnicastFramesFilter));
+    assert_param(IS_ETH_PAUSE_TIME(macconf->PauseTime));
+    assert_param(IS_ETH_ZEROQUANTA_PAUSE(macconf->ZeroQuantaPause));
+    assert_param(IS_ETH_PAUSE_LOW_THRESHOLD(macconf->PauseLowThreshold));
+    assert_param(IS_ETH_UNICAST_PAUSE_FRAME_DETECT(macconf->UnicastPauseFrameDetect));
+    assert_param(IS_ETH_RECEIVE_FLOWCONTROL(macconf->ReceiveFlowControl));
+    assert_param(IS_ETH_TRANSMIT_FLOWCONTROL(macconf->TransmitFlowControl));
+    assert_param(IS_ETH_VLAN_TAG_COMPARISON(macconf->VLANTagComparison));
+    assert_param(IS_ETH_VLAN_TAG_IDENTIFIER(macconf->VLANTagIdentifier));
+    
+    /*------------------------ ETHERNET MACCR Configuration --------------------*/
+    /* Get the ETHERNET MACCR value */
+    tmpreg1 = (heth->Instance)->MACCR;
+    /* Clear WD, PCE, PS, TE and RE bits */
+    tmpreg1 &= ETH_MACCR_CLEAR_MASK;
+    
+    tmpreg1 |= (uint32_t)(macconf->Watchdog | 
+                         macconf->Jabber | 
+                         macconf->InterFrameGap |
+                         macconf->CarrierSense |
+                         (heth->Init).Speed | 
+                         macconf->ReceiveOwn |
+                         macconf->LoopbackMode |
+                         (heth->Init).DuplexMode | 
+                         macconf->ChecksumOffload |    
+                         macconf->RetryTransmission | 
+                         macconf->AutomaticPadCRCStrip | 
+                         macconf->BackOffLimit | 
+                         macconf->DeferralCheck);
+    
+    /* Write to ETHERNET MACCR */
+    (heth->Instance)->MACCR = (uint32_t)tmpreg1;
+    
+    /* Wait until the write operation will be taken into account :
+    at least four TX_CLK/RX_CLK clock cycles */
+    tmpreg1 = (heth->Instance)->MACCR;
+    HAL_Delay(ETH_REG_WRITE_DELAY);
+    (heth->Instance)->MACCR = tmpreg1; 
+    
+    /*----------------------- ETHERNET MACFFR Configuration --------------------*/ 
+    /* Write to ETHERNET MACFFR */  
+    (heth->Instance)->MACFFR = (uint32_t)(macconf->ReceiveAll | 
+                                          macconf->SourceAddrFilter |
+                                          macconf->PassControlFrames |
+                                          macconf->BroadcastFramesReception | 
+                                          macconf->DestinationAddrFilter |
+                                          macconf->PromiscuousMode |
+                                          macconf->MulticastFramesFilter |
+                                          macconf->UnicastFramesFilter);
+     
+     /* Wait until the write operation will be taken into account :
+     at least four TX_CLK/RX_CLK clock cycles */
+     tmpreg1 = (heth->Instance)->MACFFR;
+     HAL_Delay(ETH_REG_WRITE_DELAY);
+     (heth->Instance)->MACFFR = tmpreg1;
+     
+     /*--------------- ETHERNET MACHTHR and MACHTLR Configuration ---------------*/
+     /* Write to ETHERNET MACHTHR */
+     (heth->Instance)->MACHTHR = (uint32_t)macconf->HashTableHigh;
+     
+     /* Write to ETHERNET MACHTLR */
+     (heth->Instance)->MACHTLR = (uint32_t)macconf->HashTableLow;
+     /*----------------------- ETHERNET MACFCR Configuration --------------------*/
+     
+     /* Get the ETHERNET MACFCR value */  
+     tmpreg1 = (heth->Instance)->MACFCR;
+     /* Clear xx bits */
+     tmpreg1 &= ETH_MACFCR_CLEAR_MASK;
+     
+     tmpreg1 |= (uint32_t)((macconf->PauseTime << 16U) | 
+                          macconf->ZeroQuantaPause |
+                          macconf->PauseLowThreshold |
+                          macconf->UnicastPauseFrameDetect | 
+                          macconf->ReceiveFlowControl |
+                          macconf->TransmitFlowControl); 
+     
+     /* Write to ETHERNET MACFCR */
+     (heth->Instance)->MACFCR = (uint32_t)tmpreg1;
+     
+     /* Wait until the write operation will be taken into account :
+     at least four TX_CLK/RX_CLK clock cycles */
+     tmpreg1 = (heth->Instance)->MACFCR;
+     HAL_Delay(ETH_REG_WRITE_DELAY);
+     (heth->Instance)->MACFCR = tmpreg1;
+     
+     /*----------------------- ETHERNET MACVLANTR Configuration -----------------*/
+     (heth->Instance)->MACVLANTR = (uint32_t)(macconf->VLANTagComparison | 
+                                              macconf->VLANTagIdentifier);
+      
+      /* Wait until the write operation will be taken into account :
+      at least four TX_CLK/RX_CLK clock cycles */
+      tmpreg1 = (heth->Instance)->MACVLANTR;
+      HAL_Delay(ETH_REG_WRITE_DELAY);
+      (heth->Instance)->MACVLANTR = tmpreg1;
+  }
+  else /* macconf == NULL : here we just configure Speed and Duplex mode */
+  {
+    /*------------------------ ETHERNET MACCR Configuration --------------------*/
+    /* Get the ETHERNET MACCR value */
+    tmpreg1 = (heth->Instance)->MACCR;
+    
+    /* Clear FES and DM bits */
+    tmpreg1 &= ~((uint32_t)0x00004800U);
+    
+    tmpreg1 |= (uint32_t)(heth->Init.Speed | heth->Init.DuplexMode);
+    
+    /* Write to ETHERNET MACCR */
+    (heth->Instance)->MACCR = (uint32_t)tmpreg1;
+    
+    /* Wait until the write operation will be taken into account:
+    at least four TX_CLK/RX_CLK clock cycles */
+    tmpreg1 = (heth->Instance)->MACCR;
+    HAL_Delay(ETH_REG_WRITE_DELAY);
+    (heth->Instance)->MACCR = tmpreg1;
+  }
+  
+  /* Set the ETH state to Ready */
+  heth->State= HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Sets ETH DMA Configuration.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  dmaconf: DMA Configuration structure  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf)
+{
+  uint32_t tmpreg1 = 0U;
+
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set the ETH peripheral state to BUSY */
+  heth->State= HAL_ETH_STATE_BUSY;
+
+  /* Check parameters */
+  assert_param(IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(dmaconf->DropTCPIPChecksumErrorFrame));
+  assert_param(IS_ETH_RECEIVE_STORE_FORWARD(dmaconf->ReceiveStoreForward));
+  assert_param(IS_ETH_FLUSH_RECEIVE_FRAME(dmaconf->FlushReceivedFrame));
+  assert_param(IS_ETH_TRANSMIT_STORE_FORWARD(dmaconf->TransmitStoreForward));
+  assert_param(IS_ETH_TRANSMIT_THRESHOLD_CONTROL(dmaconf->TransmitThresholdControl));
+  assert_param(IS_ETH_FORWARD_ERROR_FRAMES(dmaconf->ForwardErrorFrames));
+  assert_param(IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(dmaconf->ForwardUndersizedGoodFrames));
+  assert_param(IS_ETH_RECEIVE_THRESHOLD_CONTROL(dmaconf->ReceiveThresholdControl));
+  assert_param(IS_ETH_SECOND_FRAME_OPERATE(dmaconf->SecondFrameOperate));
+  assert_param(IS_ETH_ADDRESS_ALIGNED_BEATS(dmaconf->AddressAlignedBeats));
+  assert_param(IS_ETH_FIXED_BURST(dmaconf->FixedBurst));
+  assert_param(IS_ETH_RXDMA_BURST_LENGTH(dmaconf->RxDMABurstLength));
+  assert_param(IS_ETH_TXDMA_BURST_LENGTH(dmaconf->TxDMABurstLength));
+  assert_param(IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(dmaconf->EnhancedDescriptorFormat));
+  assert_param(IS_ETH_DMA_DESC_SKIP_LENGTH(dmaconf->DescriptorSkipLength));
+  assert_param(IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(dmaconf->DMAArbitration));
+  
+  /*----------------------- ETHERNET DMAOMR Configuration --------------------*/
+  /* Get the ETHERNET DMAOMR value */
+  tmpreg1 = (heth->Instance)->DMAOMR;
+  /* Clear xx bits */
+  tmpreg1 &= ETH_DMAOMR_CLEAR_MASK;
+
+  tmpreg1 |= (uint32_t)(dmaconf->DropTCPIPChecksumErrorFrame | 
+                       dmaconf->ReceiveStoreForward |
+                       dmaconf->FlushReceivedFrame |
+                       dmaconf->TransmitStoreForward | 
+                       dmaconf->TransmitThresholdControl |
+                       dmaconf->ForwardErrorFrames |
+                       dmaconf->ForwardUndersizedGoodFrames |
+                       dmaconf->ReceiveThresholdControl |
+                       dmaconf->SecondFrameOperate);
+
+  /* Write to ETHERNET DMAOMR */
+  (heth->Instance)->DMAOMR = (uint32_t)tmpreg1;
+
+  /* Wait until the write operation will be taken into account:
+  at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg1 = (heth->Instance)->DMAOMR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->DMAOMR = tmpreg1;
+
+  /*----------------------- ETHERNET DMABMR Configuration --------------------*/
+  (heth->Instance)->DMABMR = (uint32_t)(dmaconf->AddressAlignedBeats | 
+                                         dmaconf->FixedBurst |
+                                         dmaconf->RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */
+                                         dmaconf->TxDMABurstLength |
+                                         dmaconf->EnhancedDescriptorFormat |
+                                         (dmaconf->DescriptorSkipLength << 2U) |
+                                         dmaconf->DMAArbitration | 
+                                         ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */
+
+   /* Wait until the write operation will be taken into account:
+      at least four TX_CLK/RX_CLK clock cycles */
+   tmpreg1 = (heth->Instance)->DMABMR;
+   HAL_Delay(ETH_REG_WRITE_DELAY);
+   (heth->Instance)->DMABMR = tmpreg1;
+
+   /* Set the ETH state to Ready */
+   heth->State= HAL_ETH_STATE_READY;
+   
+   /* Process Unlocked */
+   __HAL_UNLOCK(heth);
+   
+   /* Return function status */
+   return HAL_OK; 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Exported_Functions_Group4 Peripheral State functions 
+  *  @brief   Peripheral State functions 
+  *
+  @verbatim   
+  ===============================================================================
+                         ##### Peripheral State functions #####
+  ===============================================================================  
+  [..]
+  This subsection permits to get in run-time the status of the peripheral 
+  and the data flow.
+       (+) Get the ETH handle state:
+           HAL_ETH_GetState();
+           
+
+  @endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the ETH HAL state
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL state
+  */
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth)
+{  
+  /* Return ETH state */
+  return heth->State;
+}
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+  
+/** @addtogroup ETH_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Configures Ethernet MAC and DMA with default parameters.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  err: Ethernet Init error
+  * @retval HAL status
+  */
+static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err)
+{
+  ETH_MACInitTypeDef macinit;
+  ETH_DMAInitTypeDef dmainit;
+  uint32_t tmpreg1 = 0U;
+  
+  if (err != ETH_SUCCESS) /* Auto-negotiation failed */
+  {
+    /* Set Ethernet duplex mode to Full-duplex */
+    (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX;
+    
+    /* Set Ethernet speed to 100M */
+    (heth->Init).Speed = ETH_SPEED_100M;
+  }
+  
+  /* Ethernet MAC default initialization **************************************/
+  macinit.Watchdog = ETH_WATCHDOG_ENABLE;
+  macinit.Jabber = ETH_JABBER_ENABLE;
+  macinit.InterFrameGap = ETH_INTERFRAMEGAP_96BIT;
+  macinit.CarrierSense = ETH_CARRIERSENCE_ENABLE;
+  macinit.ReceiveOwn = ETH_RECEIVEOWN_ENABLE;
+  macinit.LoopbackMode = ETH_LOOPBACKMODE_DISABLE;
+  if(heth->Init.ChecksumMode == ETH_CHECKSUM_BY_HARDWARE)
+  {
+    macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_ENABLE;
+  }
+  else
+  {
+    macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_DISABLE;
+  }
+  macinit.RetryTransmission = ETH_RETRYTRANSMISSION_DISABLE;
+  macinit.AutomaticPadCRCStrip = ETH_AUTOMATICPADCRCSTRIP_DISABLE;
+  macinit.BackOffLimit = ETH_BACKOFFLIMIT_10;
+  macinit.DeferralCheck = ETH_DEFFERRALCHECK_DISABLE;
+  macinit.ReceiveAll = ETH_RECEIVEAll_DISABLE;
+  macinit.SourceAddrFilter = ETH_SOURCEADDRFILTER_DISABLE;
+  macinit.PassControlFrames = ETH_PASSCONTROLFRAMES_BLOCKALL;
+  macinit.BroadcastFramesReception = ETH_BROADCASTFRAMESRECEPTION_ENABLE;
+  macinit.DestinationAddrFilter = ETH_DESTINATIONADDRFILTER_NORMAL;
+  macinit.PromiscuousMode = ETH_PROMISCUOUS_MODE_DISABLE;
+  macinit.MulticastFramesFilter = ETH_MULTICASTFRAMESFILTER_PERFECT;
+  macinit.UnicastFramesFilter = ETH_UNICASTFRAMESFILTER_PERFECT;
+  macinit.HashTableHigh = 0x0U;
+  macinit.HashTableLow = 0x0U;
+  macinit.PauseTime = 0x0U;
+  macinit.ZeroQuantaPause = ETH_ZEROQUANTAPAUSE_DISABLE;
+  macinit.PauseLowThreshold = ETH_PAUSELOWTHRESHOLD_MINUS4;
+  macinit.UnicastPauseFrameDetect = ETH_UNICASTPAUSEFRAMEDETECT_DISABLE;
+  macinit.ReceiveFlowControl = ETH_RECEIVEFLOWCONTROL_DISABLE;
+  macinit.TransmitFlowControl = ETH_TRANSMITFLOWCONTROL_DISABLE;
+  macinit.VLANTagComparison = ETH_VLANTAGCOMPARISON_16BIT;
+  macinit.VLANTagIdentifier = 0x0U;
+  
+  /*------------------------ ETHERNET MACCR Configuration --------------------*/
+  /* Get the ETHERNET MACCR value */
+  tmpreg1 = (heth->Instance)->MACCR;
+  /* Clear WD, PCE, PS, TE and RE bits */
+  tmpreg1 &= ETH_MACCR_CLEAR_MASK;
+  /* Set the WD bit according to ETH Watchdog value */
+  /* Set the JD: bit according to ETH Jabber value */
+  /* Set the IFG bit according to ETH InterFrameGap value */
+  /* Set the DCRS bit according to ETH CarrierSense value */
+  /* Set the FES bit according to ETH Speed value */ 
+  /* Set the DO bit according to ETH ReceiveOwn value */ 
+  /* Set the LM bit according to ETH LoopbackMode value */
+  /* Set the DM bit according to ETH Mode value */ 
+  /* Set the IPCO bit according to ETH ChecksumOffload value */
+  /* Set the DR bit according to ETH RetryTransmission value */
+  /* Set the ACS bit according to ETH AutomaticPadCRCStrip value */
+  /* Set the BL bit according to ETH BackOffLimit value */
+  /* Set the DC bit according to ETH DeferralCheck value */
+  tmpreg1 |= (uint32_t)(macinit.Watchdog | 
+                       macinit.Jabber | 
+                       macinit.InterFrameGap |
+                       macinit.CarrierSense |
+                       (heth->Init).Speed | 
+                       macinit.ReceiveOwn |
+                       macinit.LoopbackMode |
+                       (heth->Init).DuplexMode | 
+                       macinit.ChecksumOffload |    
+                       macinit.RetryTransmission | 
+                       macinit.AutomaticPadCRCStrip | 
+                       macinit.BackOffLimit | 
+                       macinit.DeferralCheck);
+  
+  /* Write to ETHERNET MACCR */
+  (heth->Instance)->MACCR = (uint32_t)tmpreg1;
+  
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg1 = (heth->Instance)->MACCR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg1; 
+  
+  /*----------------------- ETHERNET MACFFR Configuration --------------------*/ 
+  /* Set the RA bit according to ETH ReceiveAll value */
+  /* Set the SAF and SAIF bits according to ETH SourceAddrFilter value */
+  /* Set the PCF bit according to ETH PassControlFrames value */
+  /* Set the DBF bit according to ETH BroadcastFramesReception value */
+  /* Set the DAIF bit according to ETH DestinationAddrFilter value */
+  /* Set the PR bit according to ETH PromiscuousMode value */
+  /* Set the PM, HMC and HPF bits according to ETH MulticastFramesFilter value */
+  /* Set the HUC and HPF bits according to ETH UnicastFramesFilter value */
+  /* Write to ETHERNET MACFFR */  
+  (heth->Instance)->MACFFR = (uint32_t)(macinit.ReceiveAll | 
+                                        macinit.SourceAddrFilter |
+                                        macinit.PassControlFrames |
+                                        macinit.BroadcastFramesReception | 
+                                        macinit.DestinationAddrFilter |
+                                        macinit.PromiscuousMode |
+                                        macinit.MulticastFramesFilter |
+                                        macinit.UnicastFramesFilter);
+   
+   /* Wait until the write operation will be taken into account:
+      at least four TX_CLK/RX_CLK clock cycles */
+   tmpreg1 = (heth->Instance)->MACFFR;
+   HAL_Delay(ETH_REG_WRITE_DELAY);
+   (heth->Instance)->MACFFR = tmpreg1;
+   
+   /*--------------- ETHERNET MACHTHR and MACHTLR Configuration --------------*/
+   /* Write to ETHERNET MACHTHR */
+   (heth->Instance)->MACHTHR = (uint32_t)macinit.HashTableHigh;
+   
+   /* Write to ETHERNET MACHTLR */
+   (heth->Instance)->MACHTLR = (uint32_t)macinit.HashTableLow;
+   /*----------------------- ETHERNET MACFCR Configuration -------------------*/
+   
+   /* Get the ETHERNET MACFCR value */  
+   tmpreg1 = (heth->Instance)->MACFCR;
+   /* Clear xx bits */
+   tmpreg1 &= ETH_MACFCR_CLEAR_MASK;
+   
+   /* Set the PT bit according to ETH PauseTime value */
+   /* Set the DZPQ bit according to ETH ZeroQuantaPause value */
+   /* Set the PLT bit according to ETH PauseLowThreshold value */
+   /* Set the UP bit according to ETH UnicastPauseFrameDetect value */
+   /* Set the RFE bit according to ETH ReceiveFlowControl value */
+   /* Set the TFE bit according to ETH TransmitFlowControl value */ 
+   tmpreg1 |= (uint32_t)((macinit.PauseTime << 16U) | 
+                        macinit.ZeroQuantaPause |
+                        macinit.PauseLowThreshold |
+                        macinit.UnicastPauseFrameDetect | 
+                        macinit.ReceiveFlowControl |
+                        macinit.TransmitFlowControl); 
+   
+   /* Write to ETHERNET MACFCR */
+   (heth->Instance)->MACFCR = (uint32_t)tmpreg1;
+   
+   /* Wait until the write operation will be taken into account:
+   at least four TX_CLK/RX_CLK clock cycles */
+   tmpreg1 = (heth->Instance)->MACFCR;
+   HAL_Delay(ETH_REG_WRITE_DELAY);
+   (heth->Instance)->MACFCR = tmpreg1;
+   
+   /*----------------------- ETHERNET MACVLANTR Configuration ----------------*/
+   /* Set the ETV bit according to ETH VLANTagComparison value */
+   /* Set the VL bit according to ETH VLANTagIdentifier value */  
+   (heth->Instance)->MACVLANTR = (uint32_t)(macinit.VLANTagComparison | 
+                                            macinit.VLANTagIdentifier);
+    
+    /* Wait until the write operation will be taken into account:
+       at least four TX_CLK/RX_CLK clock cycles */
+    tmpreg1 = (heth->Instance)->MACVLANTR;
+    HAL_Delay(ETH_REG_WRITE_DELAY);
+    (heth->Instance)->MACVLANTR = tmpreg1;
+    
+    /* Ethernet DMA default initialization ************************************/
+    dmainit.DropTCPIPChecksumErrorFrame = ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE;
+    dmainit.ReceiveStoreForward = ETH_RECEIVESTOREFORWARD_ENABLE;
+    dmainit.FlushReceivedFrame = ETH_FLUSHRECEIVEDFRAME_ENABLE;
+    dmainit.TransmitStoreForward = ETH_TRANSMITSTOREFORWARD_ENABLE;  
+    dmainit.TransmitThresholdControl = ETH_TRANSMITTHRESHOLDCONTROL_64BYTES;
+    dmainit.ForwardErrorFrames = ETH_FORWARDERRORFRAMES_DISABLE;
+    dmainit.ForwardUndersizedGoodFrames = ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE;
+    dmainit.ReceiveThresholdControl = ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES;
+    dmainit.SecondFrameOperate = ETH_SECONDFRAMEOPERARTE_ENABLE;
+    dmainit.AddressAlignedBeats = ETH_ADDRESSALIGNEDBEATS_ENABLE;
+    dmainit.FixedBurst = ETH_FIXEDBURST_ENABLE;
+    dmainit.RxDMABurstLength = ETH_RXDMABURSTLENGTH_32BEAT;
+    dmainit.TxDMABurstLength = ETH_TXDMABURSTLENGTH_32BEAT;
+    dmainit.EnhancedDescriptorFormat = ETH_DMAENHANCEDDESCRIPTOR_ENABLE;
+    dmainit.DescriptorSkipLength = 0x0U;
+    dmainit.DMAArbitration = ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1;
+    
+    /* Get the ETHERNET DMAOMR value */
+    tmpreg1 = (heth->Instance)->DMAOMR;
+    /* Clear xx bits */
+    tmpreg1 &= ETH_DMAOMR_CLEAR_MASK;
+    
+    /* Set the DT bit according to ETH DropTCPIPChecksumErrorFrame value */
+    /* Set the RSF bit according to ETH ReceiveStoreForward value */
+    /* Set the DFF bit according to ETH FlushReceivedFrame value */
+    /* Set the TSF bit according to ETH TransmitStoreForward value */
+    /* Set the TTC bit according to ETH TransmitThresholdControl value */
+    /* Set the FEF bit according to ETH ForwardErrorFrames value */
+    /* Set the FUF bit according to ETH ForwardUndersizedGoodFrames value */
+    /* Set the RTC bit according to ETH ReceiveThresholdControl value */
+    /* Set the OSF bit according to ETH SecondFrameOperate value */
+    tmpreg1 |= (uint32_t)(dmainit.DropTCPIPChecksumErrorFrame | 
+                         dmainit.ReceiveStoreForward |
+                         dmainit.FlushReceivedFrame |
+                         dmainit.TransmitStoreForward | 
+                         dmainit.TransmitThresholdControl |
+                         dmainit.ForwardErrorFrames |
+                         dmainit.ForwardUndersizedGoodFrames |
+                         dmainit.ReceiveThresholdControl |
+                         dmainit.SecondFrameOperate);
+    
+    /* Write to ETHERNET DMAOMR */
+    (heth->Instance)->DMAOMR = (uint32_t)tmpreg1;
+    
+    /* Wait until the write operation will be taken into account:
+       at least four TX_CLK/RX_CLK clock cycles */
+    tmpreg1 = (heth->Instance)->DMAOMR;
+    HAL_Delay(ETH_REG_WRITE_DELAY);
+    (heth->Instance)->DMAOMR = tmpreg1;
+    
+    /*----------------------- ETHERNET DMABMR Configuration ------------------*/
+    /* Set the AAL bit according to ETH AddressAlignedBeats value */
+    /* Set the FB bit according to ETH FixedBurst value */
+    /* Set the RPBL and 4*PBL bits according to ETH RxDMABurstLength value */
+    /* Set the PBL and 4*PBL bits according to ETH TxDMABurstLength value */
+    /* Set the Enhanced DMA descriptors bit according to ETH EnhancedDescriptorFormat value*/
+    /* Set the DSL bit according to ETH DesciptorSkipLength value */
+    /* Set the PR and DA bits according to ETH DMAArbitration value */
+    (heth->Instance)->DMABMR = (uint32_t)(dmainit.AddressAlignedBeats | 
+                                          dmainit.FixedBurst |
+                                          dmainit.RxDMABurstLength |    /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */
+                                          dmainit.TxDMABurstLength |
+                                          dmainit.EnhancedDescriptorFormat |
+                                          (dmainit.DescriptorSkipLength << 2U) |
+                                          dmainit.DMAArbitration |
+                                          ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */
+     
+     /* Wait until the write operation will be taken into account:
+        at least four TX_CLK/RX_CLK clock cycles */
+     tmpreg1 = (heth->Instance)->DMABMR;
+     HAL_Delay(ETH_REG_WRITE_DELAY);
+     (heth->Instance)->DMABMR = tmpreg1;
+
+     if((heth->Init).RxMode == ETH_RXINTERRUPT_MODE)
+     {
+       /* Enable the Ethernet Rx Interrupt */
+       __HAL_ETH_DMA_ENABLE_IT((heth), ETH_DMA_IT_NIS | ETH_DMA_IT_R);
+     }
+
+     /* Initialize MAC address in ethernet MAC */ 
+     ETH_MACAddressConfig(heth, ETH_MAC_ADDRESS0, heth->Init.MACAddr);
+}
+
+/**
+  * @brief  Configures the selected MAC address.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  MacAddr: The MAC address to configure
+  *          This parameter can be one of the following values:
+  *             @arg ETH_MAC_Address0: MAC Address0 
+  *             @arg ETH_MAC_Address1: MAC Address1 
+  *             @arg ETH_MAC_Address2: MAC Address2
+  *             @arg ETH_MAC_Address3: MAC Address3
+  * @param  Addr: Pointer to MAC address buffer data (6 bytes)
+  * @retval HAL status
+  */
+static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr)
+{
+  uint32_t tmpreg1;
+  
+  /* Check the parameters */
+  assert_param(IS_ETH_MAC_ADDRESS0123(MacAddr));
+  
+  /* Calculate the selected MAC address high register */
+  tmpreg1 = ((uint32_t)Addr[5U] << 8U) | (uint32_t)Addr[4U];
+  /* Load the selected MAC address high register */
+  (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_HBASE + MacAddr))) = tmpreg1;
+  /* Calculate the selected MAC address low register */
+  tmpreg1 = ((uint32_t)Addr[3U] << 24U) | ((uint32_t)Addr[2U] << 16U) | ((uint32_t)Addr[1U] << 8U) | Addr[0U];
+  
+  /* Load the selected MAC address low register */
+  (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_LBASE + MacAddr))) = tmpreg1;
+}
+
+/**
+  * @brief  Enables the MAC transmission.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module  
+  * @retval None
+  */
+static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth)
+{ 
+  __IO uint32_t tmpreg1 = 0U;
+  
+  /* Enable the MAC transmission */
+  (heth->Instance)->MACCR |= ETH_MACCR_TE;
+  
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg1 = (heth->Instance)->MACCR;
+  ETH_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg1;
+}
+
+/**
+  * @brief  Disables the MAC transmission.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module  
+  * @retval None
+  */
+static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth)
+{ 
+  __IO uint32_t tmpreg1 = 0U;
+  
+  /* Disable the MAC transmission */
+  (heth->Instance)->MACCR &= ~ETH_MACCR_TE;
+  
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg1 = (heth->Instance)->MACCR;
+  ETH_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg1;
+}
+
+/**
+  * @brief  Enables the MAC reception.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module   
+  * @retval None
+  */
+static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth)
+{ 
+  __IO uint32_t tmpreg1 = 0U;
+  
+  /* Enable the MAC reception */
+  (heth->Instance)->MACCR |= ETH_MACCR_RE;
+  
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg1 = (heth->Instance)->MACCR;
+  ETH_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg1;
+}
+
+/**
+  * @brief  Disables the MAC reception.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module   
+  * @retval None
+  */
+static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth)
+{ 
+  __IO uint32_t tmpreg1 = 0U;
+  
+  /* Disable the MAC reception */
+  (heth->Instance)->MACCR &= ~ETH_MACCR_RE; 
+  
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg1 = (heth->Instance)->MACCR;
+  ETH_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg1;
+}
+
+/**
+  * @brief  Enables the DMA transmission.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module   
+  * @retval None
+  */
+static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth)
+{
+  /* Enable the DMA transmission */
+  (heth->Instance)->DMAOMR |= ETH_DMAOMR_ST;  
+}
+
+/**
+  * @brief  Disables the DMA transmission.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module   
+  * @retval None
+  */
+static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth)
+{ 
+  /* Disable the DMA transmission */
+  (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_ST;
+}
+
+/**
+  * @brief  Enables the DMA reception.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module 
+  * @retval None
+  */
+static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth)
+{  
+  /* Enable the DMA reception */
+  (heth->Instance)->DMAOMR |= ETH_DMAOMR_SR;  
+}
+
+/**
+  * @brief  Disables the DMA reception.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module 
+  * @retval None
+  */
+static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth)
+{ 
+  /* Disable the DMA reception */
+  (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_SR;
+}
+
+/**
+  * @brief  Clears the ETHERNET transmit FIFO.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth)
+{
+  __IO uint32_t tmpreg1 = 0U;
+  
+  /* Set the Flush Transmit FIFO bit */
+  (heth->Instance)->DMAOMR |= ETH_DMAOMR_FTF;
+  
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg1 = (heth->Instance)->DMAOMR;
+  ETH_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->DMAOMR = tmpreg1;
+}
+
+/**
+  * @brief  This function provides delay (in milliseconds) based on CPU cycles method.
+  * @param  mdelay: specifies the delay time length, in milliseconds.
+  * @retval None
+  */
+static void ETH_Delay(uint32_t mdelay)
+{
+  __IO uint32_t Delay = mdelay * (SystemCoreClock / 8U / 1000U);
+  do 
+  {
+    __NOP();
+  } 
+  while (Delay --);
+}
+
+/**
+  * @}
+  */
+
+#endif /* STM32F207xx || STM32F217xx */
+#endif /* HAL_ETH_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/