mbed official
mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
Diff: targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_uart_ex.c
- Revision:
- 149:156823d33999
- Parent:
- 144:ef7eb2e8f9f7
- Child:
- 156:95d6b41a828b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_uart_ex.c Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,618 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_uart_ex.c
+ * @author MCD Application Team
+ * @version V1.4.0
+ * @date 27-May-2016
+ * @brief Extended UART HAL module driver.
+ * This file provides firmware functions to manage the following extended
+ * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART).
+ * + Initialization and de-initialization functions
+ * + Peripheral Control functions
+ *
+ *
+ @verbatim
+ ==============================================================================
+ ##### UART peripheral extended features #####
+ ==============================================================================
+
+ (#) Declare a UART_HandleTypeDef handle structure.
+
+ (#) For the UART RS485 Driver Enable mode, initialize the UART registers
+ by calling the HAL_RS485Ex_Init() API.
+
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup UARTEx UARTEx
+ * @brief UART Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_UART_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup UARTEx_Private_Functions UARTEx Private Functions
+ * @{
+ */
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions
+ * @{
+ */
+
+/** @defgroup UARTEx_Exported_Functions_Group1 Extended Initialization and de-initialization functions
+ * @brief Extended Initialization and Configuration Functions
+ *
+@verbatim
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
+ in asynchronous mode.
+ (+) For the asynchronous mode the parameters below can be configured:
+ (++) Baud Rate
+ (++) Word Length (Fixed to 8-bits only for LIN mode)
+ (++) Stop Bit
+ (++) Parity
+ (++) Hardware flow control
+ (++) Receiver/transmitter modes
+ (++) Over Sampling Method
+ (++) One-Bit Sampling Method
+ (+) For the asynchronous mode, the following advanced features can be configured as well:
+ (++) TX and/or RX pin level inversion
+ (++) data logical level inversion
+ (++) RX and TX pins swap
+ (++) RX overrun detection disabling
+ (++) DMA disabling on RX error
+ (++) MSB first on communication line
+ (++) auto Baud rate detection
+ [..]
+ The HAL_LIN_Init() and HAL_RS485Ex_Init() APIs follows respectively the LIN and
+ the UART RS485 mode configuration procedures (details for the procedures are
+ available in reference manual).
+
+@endverbatim
+ * @{
+ */
+
+/*
+ Additional Table: If the parity is enabled, then the MSB bit of the data written
+ in the data register is transmitted but is changed by the parity bit.
+ According to device capability (support or not of 7-bit word length),
+ frame length is either defined by the M bit (8-bits or 9-bits)
+ or by the M1 and M0 bits (7-bit, 8-bit or 9-bit).
+ Possible UART frame formats are as listed in the following table:
+
+ Table 1. UART frame format.
+ +-----------------------------------------------------------------------+
+ | M bit | PCE bit | UART frame |
+ |-------------------|-----------|---------------------------------------|
+ | 0 | 0 | | SB | 8-bit data | STB | |
+ |-------------------|-----------|---------------------------------------|
+ | 0 | 1 | | SB | 7-bit data | PB | STB | |
+ |-------------------|-----------|---------------------------------------|
+ | 1 | 0 | | SB | 9-bit data | STB | |
+ |-------------------|-----------|---------------------------------------|
+ | 1 | 1 | | SB | 8-bit data | PB | STB | |
+ +-----------------------------------------------------------------------+
+ | M1 bit | M0 bit | PCE bit | UART frame |
+ |---------|---------|-----------|---------------------------------------|
+ | 0 | 0 | 0 | | SB | 8 bit data | STB | |
+ |---------|---------|-----------|---------------------------------------|
+ | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | |
+ |---------|---------|-----------|---------------------------------------|
+ | 0 | 1 | 0 | | SB | 9 bit data | STB | |
+ |---------|---------|-----------|---------------------------------------|
+ | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | |
+ |---------|---------|-----------|---------------------------------------|
+ | 1 | 0 | 0 | | SB | 7 bit data | STB | |
+ |---------|---------|-----------|---------------------------------------|
+ | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | |
+ +-----------------------------------------------------------------------+
+
+*/
+
+/**
+ * @brief Initialize the RS485 Driver enable feature according to the specified
+ * parameters in the UART_InitTypeDef and creates the associated handle.
+ * @param huart: UART handle.
+ * @param Polarity: select the driver enable polarity.
+ * This parameter can be one of the following values:
+ * @arg UART_DE_POLARITY_HIGH: DE signal is active high
+ * @arg UART_DE_POLARITY_LOW: DE signal is active low
+ * @param AssertionTime: Driver Enable assertion time:
+ * 5-bit value defining the time between the activation of the DE (Driver Enable)
+ * signal and the beginning of the start bit. It is expressed in sample time
+ * units (1/8 or 1/16 bit time, depending on the oversampling rate)
+ * @param DeassertionTime: Driver Enable deassertion time:
+ * 5-bit value defining the time between the end of the last stop bit, in a
+ * transmitted message, and the de-activation of the DE (Driver Enable) signal.
+ * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the
+ * oversampling rate).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, uint32_t DeassertionTime)
+{
+ uint32_t temp = 0x0;
+
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+ /* Check the Driver Enable UART instance */
+ assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance));
+
+ /* Check the Driver Enable polarity */
+ assert_param(IS_UART_DE_POLARITY(Polarity));
+
+ /* Check the Driver Enable assertion time */
+ assert_param(IS_UART_ASSERTIONTIME(AssertionTime));
+
+ /* Check the Driver Enable deassertion time */
+ assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime));
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ if (UART_SetConfig(huart) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ if(huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+ {
+ UART_AdvFeatureConfig(huart);
+ }
+
+ /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DEM);
+
+ /* Set the Driver Enable polarity */
+ MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity);
+
+ /* Set the Driver Enable assertion and deassertion times */
+ temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS);
+ temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS);
+ MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT|USART_CR1_DEAT), temp);
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */
+ return (UART_CheckIdleState(huart));
+}
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+/**
+ * @brief Initialize the LIN mode according to the specified
+ * parameters in the UART_InitTypeDef and creates the associated handle .
+ * @param huart: UART handle.
+ * @param BreakDetectLength: specifies the LIN break detection length.
+ * This parameter can be one of the following values:
+ * @arg UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection
+ * @arg UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the LIN UART instance */
+ assert_param(IS_UART_LIN_INSTANCE(huart->Instance));
+ /* Check the Break detection length parameter */
+ assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength));
+
+ /* LIN mode limited to 16-bit oversampling only */
+ if(huart->Init.OverSampling == UART_OVERSAMPLING_8)
+ {
+ return HAL_ERROR;
+ }
+ /* LIN mode limited to 8-bit data length */
+ if(huart->Init.WordLength != UART_WORDLENGTH_8B)
+ {
+ return HAL_ERROR;
+ }
+
+ if(huart->gState == HAL_UART_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ huart->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_UART_MspInit(huart);
+ }
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the UART Communication parameters */
+ if (UART_SetConfig(huart) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+ {
+ UART_AdvFeatureConfig(huart);
+ }
+
+ /* In LIN mode, the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register,
+ - SCEN and IREN bits in the USART_CR3 register.*/
+ huart->Instance->CR2 &= ~(USART_CR2_CLKEN);
+ huart->Instance->CR3 &= ~(USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN);
+
+ /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
+ huart->Instance->CR2 |= USART_CR2_LINEN;
+
+ /* Set the USART LIN Break detection length. */
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength);
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */
+ return (UART_CheckIdleState(huart));
+}
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+
+/**
+ * @}
+ */
+
+/** @defgroup UARTEx_Exported_Functions_Group2 Extended IO operation function
+ * @brief Extended UART Interrupt handling function
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation function #####
+ ===============================================================================
+ [..]
+ This subsection provides function to handle Wake up interrupt call-back.
+
+ (#) Callback provided in No_Blocking mode:
+ (++) HAL_UARTEx_WakeupCallback()
+
+@endverbatim
+ * @{
+ */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+/**
+ * @brief UART wakeup from Stop mode callback
+ * @param huart: UART handle
+ * @retval None
+ */
+ __weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UARTEx_WakeupCallback can be implemented in the user file
+ */
+}
+#endif /*!defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)*/
+
+/**
+ * @}
+ */
+
+
+/** @defgroup UARTEx_Exported_Functions_Group3 Extended Peripheral Control functions
+ * @brief Extended Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control function #####
+ ===============================================================================
+ [..]
+ This subsection provides extended functions allowing to control the UART.
+ (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API sets Wakeup from Stop mode interrupt flag selection
+ (+) HAL_UARTEx_EnableStopMode() API allows the UART to wake up the MCU from Stop mode as
+ long as UART clock is HSI or LSE
+ (+) HAL_UARTEx_DisableStopMode() API disables the above feature
+ (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address
+ detection length to more than 4 bits for multiprocessor address mark wake up.
+ (+) HAL_LIN_SendBreak() API transmits the break characters
+
+@endverbatim
+ * @{
+ */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+/**
+ * @brief Set Wakeup from Stop mode interrupt flag selection.
+ * @param huart: UART handle.
+ * @param WakeUpSelection: address match, Start Bit detection or RXNE bit status.
+ * This parameter can be one of the following values:
+ * @arg UART_WAKEUP_ON_ADDRESS
+ * @arg UART_WAKEUP_ON_STARTBIT
+ * @arg UART_WAKEUP_ON_READDATA_NONEMPTY
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* check the wake-up from stop mode UART instance */
+ assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance));
+ /* check the wake-up selection parameter */
+ assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the wake-up selection scheme */
+ MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent);
+
+ if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS)
+ {
+ UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection);
+ }
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* Wait until REACK flag is set */
+ if(UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, HAL_UART_TIMEOUT_VALUE) != HAL_OK)
+ {
+ status = HAL_TIMEOUT;
+ }
+ else
+ {
+ /* Initialize the UART State */
+ huart->gState = HAL_UART_STATE_READY;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return status;
+}
+
+
+/**
+ * @brief Enable UART Stop Mode.
+ * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE.
+ * @param huart: UART handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart)
+{
+ /* Check parameter */
+ assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Set UESM bit */
+ SET_BIT(huart->Instance->CR1, USART_CR1_UESM);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable UART Stop Mode.
+ * @param huart: UART handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart)
+{
+ /* Check parameter */
+ assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Clear UESM bit */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM);
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+
+/**
+ * @brief By default in multiprocessor mode, when the wake up method is set
+ * to address mark, the UART handles only 4-bit long addresses detection;
+ * this API allows to enable longer addresses detection (6-, 7- or 8-bit
+ * long).
+ * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode,
+ * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode.
+ * @param huart: UART handle.
+ * @param AddressLength: this parameter can be one of the following values:
+ * @arg UART_ADDRESS_DETECT_4B: 4-bit long address
+ * @arg UART_ADDRESS_DETECT_7B: 6-, 7- or 8-bit long address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength)
+{
+ /* Check the UART handle allocation */
+ if(huart == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the address length parameter */
+ assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength));
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_UART_DISABLE(huart);
+
+ /* Set the address length */
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength);
+
+ /* Enable the Peripheral */
+ __HAL_UART_ENABLE(huart);
+
+ /* TEACK and/or REACK to check before moving huart->gState to Ready */
+ return (UART_CheckIdleState(huart));
+}
+
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+/**
+ * @brief Transmit break characters.
+ * @param huart: UART handle.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart)
+{
+ /* Check the parameters */
+ assert_param(IS_UART_LIN_INSTANCE(huart->Instance));
+
+ /* Process Locked */
+ __HAL_LOCK(huart);
+
+ huart->gState = HAL_UART_STATE_BUSY;
+
+ /* Send break characters */
+ huart->Instance->RQR |= UART_SENDBREAK_REQUEST;
+
+ huart->gState = HAL_UART_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ return HAL_OK;
+}
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup UARTEx_Private_Functions
+ * @{
+ */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+/**
+ * @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection.
+ * @param huart: UART handle.
+ * @param WakeUpSelection: UART wake up from stop mode parameters.
+ * @retval None
+ */
+static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection)
+{
+ /* Check parmeters */
+ assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance));
+ assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength));
+
+ /* Set the USART address length */
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength);
+
+ /* Set the USART address node */
+ MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS));
+}
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_UART_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
