mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

Revision:
149:156823d33999
Parent:
144:ef7eb2e8f9f7
Child:
156:95d6b41a828b
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_rtc_ex.h	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,1066 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_rtc_ex.h
+  * @author  MCD Application Team
+  * @version V1.4.0
+  * @date    27-May-2016
+  * @brief   Header file of RTC HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RTC_EX_H
+#define __STM32F0xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RTCEx RTCEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+
+/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
+  * @{
+  */
+
+/**
+  * @brief  RTC Tamper structure definition
+  */
+typedef struct
+{
+  uint32_t Tamper;                      /*!< Specifies the Tamper Pin.
+                                             This parameter can be a value of @ref  RTCEx_Tamper_Pins_Definitions */
+
+  uint32_t Trigger;                     /*!< Specifies the Tamper Trigger.
+                                             This parameter can be a value of @ref  RTCEx_Tamper_Trigger_Definitions */
+
+  uint32_t Filter;                      /*!< Specifies the RTC Filter Tamper.
+                                             This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
+
+  uint32_t SamplingFrequency;           /*!< Specifies the sampling frequency.
+                                             This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
+
+  uint32_t PrechargeDuration;           /*!< Specifies the Precharge Duration .
+                                             This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
+
+  uint32_t TamperPullUp;                /*!< Specifies the Tamper PullUp .
+                                             This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
+
+  uint32_t TimeStampOnTamperDetection;  /*!< Specifies the TimeStampOnTamperDetection.
+                                             This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
+}RTC_TamperTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
+  * @{
+  */
+
+/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output Selection Definition
+  * @{
+  */
+#define RTC_OUTPUT_DISABLE             ((uint32_t)0x00000000)
+#define RTC_OUTPUT_ALARMA              ((uint32_t)0x00200000)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+#define RTC_OUTPUT_WAKEUP              ((uint32_t)0x00600000)
+#endif
+
+/**
+  * @}
+  */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
+/** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definition
+  * @{
+  */
+#define RTC_BKP_DR0                       ((uint32_t)0x00000000)
+#define RTC_BKP_DR1                       ((uint32_t)0x00000001)
+#define RTC_BKP_DR2                       ((uint32_t)0x00000002)
+#define RTC_BKP_DR3                       ((uint32_t)0x00000003)
+#define RTC_BKP_DR4                       ((uint32_t)0x00000004)
+/**
+  * @}
+  */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
+
+/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition
+  * @{
+  */
+#define RTC_TIMESTAMPEDGE_RISING          ((uint32_t)0x00000000)
+#define RTC_TIMESTAMPEDGE_FALLING         ((uint32_t)0x00000008)
+
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection
+  * @{
+  */
+#define RTC_TIMESTAMPPIN_DEFAULT              ((uint32_t)0x00000000)
+
+/**
+  * @}
+  */
+
+  
+/** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definition
+  * @{
+  */
+#define RTC_TAMPER_1                    RTC_TAFCR_TAMP1E
+#define RTC_TAMPER_2                    RTC_TAFCR_TAMP2E
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#define RTC_TAMPER_3                    RTC_TAFCR_TAMP3E
+#endif
+
+/**
+  * @}
+  */
+
+
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Trigger Definition
+  * @{
+  */
+#define RTC_TAMPERTRIGGER_RISINGEDGE       ((uint32_t)0x00000000)
+#define RTC_TAMPERTRIGGER_FALLINGEDGE      ((uint32_t)0x00000002)
+#define RTC_TAMPERTRIGGER_LOWLEVEL         RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL        RTC_TAMPERTRIGGER_FALLINGEDGE
+
+
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definition
+  * @{
+  */
+#define RTC_TAMPERFILTER_DISABLE   ((uint32_t)0x00000000)  /*!< Tamper filter is disabled */
+
+#define RTC_TAMPERFILTER_2SAMPLE   ((uint32_t)0x00000800)  /*!< Tamper is activated after 2
+                                                                consecutive samples at the active level */
+#define RTC_TAMPERFILTER_4SAMPLE   ((uint32_t)0x00001000)  /*!< Tamper is activated after 4
+                                                                consecutive samples at the active level */
+#define RTC_TAMPERFILTER_8SAMPLE   ((uint32_t)0x00001800)  /*!< Tamper is activated after 8
+                                                                consecutive samples at the active level. */
+
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definition  
+  * @{
+  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768  ((uint32_t)0x00000000)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 32768 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384  ((uint32_t)0x00000100)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 16384 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192   ((uint32_t)0x00000200)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 8192  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096   ((uint32_t)0x00000300)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 4096  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048   ((uint32_t)0x00000400)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 2048  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024   ((uint32_t)0x00000500)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 1024  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512    ((uint32_t)0x00000600)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 512   */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256    ((uint32_t)0x00000700)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 256   */
+
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definition
+  * @{
+  */
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000)  /*!< Tamper pins are pre-charged before
+                                                                         sampling during 1 RTCCLK cycle */
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000)  /*!< Tamper pins are pre-charged before
+                                                                         sampling during 2 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000)  /*!< Tamper pins are pre-charged before
+                                                                         sampling during 4 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000)  /*!< Tamper pins are pre-charged before
+                                                                         sampling during 8 RTCCLK cycles */
+
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStampOnTamperDetection Definition
+  * @{
+  */
+#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE  ((uint32_t)RTC_TAFCR_TAMPTS)  /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000)        /*!< TimeStamp on Tamper Detection event is not saved */
+
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull UP Definition
+  * @{
+  */
+#define RTC_TAMPER_PULLUP_ENABLE  ((uint32_t)0x00000000)            /*!< Tamper pins are pre-charged before sampling */
+#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS)   /*!< Tamper pins are not pre-charged before sampling */
+
+/**
+  * @}
+  */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definition
+  * @{
+  */
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16        ((uint32_t)0x00000000)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8         ((uint32_t)0x00000001)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4         ((uint32_t)0x00000002)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2         ((uint32_t)0x00000003)
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS      ((uint32_t)0x00000004)
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS      ((uint32_t)0x00000006)
+
+
+/**
+  * @}
+  */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definition
+  * @{
+  */
+#define RTC_SMOOTHCALIB_PERIOD_32SEC   ((uint32_t)0x00000000) /*!<  If RTCCLK = 32768 Hz, Smooth calibation
+                                                                    period is 32s,  else 2exp20 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC   ((uint32_t)0x00002000) /*!<  If RTCCLK = 32768 Hz, Smooth calibation
+                                                                    period is 16s, else 2exp19 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC    ((uint32_t)0x00004000) /*!<  If RTCCLK = 32768 Hz, Smooth calibation
+                                                                    period is 8s, else 2exp18 RTCCLK seconds */
+
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definition
+  * @{
+  */
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET    ((uint32_t)0x00008000) /*!<  The number of RTCCLK pulses added
+                                                                       during a X -second window = Y - CALM[8:0]
+                                                                       with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET  ((uint32_t)0x00000000) /*!<  The number of RTCCLK pulses subbstited
+                                                                       during a 32-second window =   CALM[8:0] */
+
+/**
+  * @}
+  */
+ /** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions
+  * @{
+  */
+#define RTC_CALIBOUTPUT_512HZ            ((uint32_t)0x00000000)
+#define RTC_CALIBOUTPUT_1HZ              ((uint32_t)0x00080000)
+
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definition
+  * @{
+  */
+#define RTC_SHIFTADD1S_RESET      ((uint32_t)0x00000000U)
+#define RTC_SHIFTADD1S_SET        ((uint32_t)0x80000000U)
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
+  * @{
+  */
+
+/* ---------------------------------WAKEUPTIMER---------------------------------*/
+/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer
+  * @{
+  */
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+  * @brief  Enable the RTC WakeUp Timer peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__)                      ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
+
+/**
+  * @brief  Disable the RTC WakeUp Timer peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__)                     ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
+
+/**
+  * @brief  Enable the RTC WakeUpTimer interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT: WakeUpTimer interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the RTC WakeUpTimer interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be disabled.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT: WakeUpTimer interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC WakeUpTimer interrupt to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT:  WakeUpTimer interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__)       (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT:  WakeUpTimer interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)   (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Get the selected RTC WakeUpTimer's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC WakeUpTimer Flag is pending or not.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_WUTF
+  *             @arg RTC_FLAG_WUTWF
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__)   (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Clear the RTC Wake Up timer's pending flags.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC WakeUpTimer Flag to clear.
+  *         This parameter can be:
+  *            @arg RTC_FLAG_WUTF
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) 
+
+/* WAKE-UP TIMER EXTI */
+/* ------------------ */
+/**
+  * @brief  Enable interrupt on the RTC WakeUp Timer associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT()       (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable interrupt on the RTC WakeUp Timer associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT()      (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+  * @brief  Enable event on the RTC WakeUp Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT()    (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable event on the RTC WakeUp Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT()   (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+  * @brief  Enable falling edge trigger on the RTC WakeUp Timer associated Exti line. 
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+  * @brief  Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+  * @brief  Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+  * @brief  Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
+  * This parameter can be:
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+  * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.
+  * @retval Line Status.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG()              (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief Clear the RTC WakeUp Timer associated Exti line flag.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG()            (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT()         (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+/**
+  * @}
+  */
+
+/* ---------------------------------TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Timestamp RTC Timestamp
+  * @{
+  */
+/**
+  * @brief  Enable the RTC TimeStamp peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__)                        ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+/**
+  * @brief  Disable the RTC TimeStamp peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__)                       ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+  * @brief  Enable the RTC TimeStamp interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC TimeStamp interrupt source to be enabled.
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__)      ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the RTC TimeStamp interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC TimeStamp interrupt source to be disabled. 
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__)     ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified RTC TimeStamp interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC TimeStamp interrupt to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__)         (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
+
+/**
+  * @brief  Check whether the specified RTC Time Stamp interrupt has been enabled or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Get the selected RTC TimeStamp's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC TimeStamp Flag is pending or not.
+  *         This parameter can be:
+  *            @arg RTC_FLAG_TSF   
+  *            @arg RTC_FLAG_TSOVF     
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__)            (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+  * @brief  Clear the RTC Time Stamp's pending flags.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Alarm Flag to clear.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_TSF  
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__)          ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+  * @}
+  */
+
+/* ---------------------------------TAMPER------------------------------------*/
+/** @defgroup RTCEx_Tamper RTC Tamper
+  * @{
+  */
+
+/**
+  * @brief  Enable the RTC Tamper1 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E))
+
+/**
+  * @brief  Disable the RTC Tamper1 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E))
+
+/**
+  * @brief  Enable the RTC Tamper2 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E))
+
+/**
+  * @brief  Disable the RTC Tamper2 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E))
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+  * @brief  Enable the RTC Tamper3 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP3E))
+
+/**
+  * @brief  Disable the RTC Tamper3 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP3E))
+
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+/**
+  * @brief  Enable the RTC Tamper interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg RTC_IT_TAMP: Tamper interrupt
+  * @retval None
+  */   
+#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__)        ((__HANDLE__)->Instance->TAFCR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the RTC Tamper interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled. 
+  *         This parameter can be any combination of the following values:
+  *            @arg RTC_IT_TAMP: Tamper interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__)       ((__HANDLE__)->Instance->TAFCR &= ~(__INTERRUPT__))
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+  * @brief  Check whether the specified RTC Tamper interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Tamper interrupt to check.
+  *         This parameter can be:
+  *            @arg  RTC_IT_TAMP1: Tamper1 interrupt
+  *            @arg  RTC_IT_TAMP2: Tamper2 interrupt
+  *            @arg  RTC_IT_TAMP3: Tamper3 interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__)       (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
+#else
+
+/**
+  * @brief  Check whether the specified RTC Tamper interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Tamper interrupt to check.
+  *         This parameter can be:
+  *            @arg  RTC_IT_TAMP1: Tamper1 interrupt
+  *            @arg  RTC_IT_TAMP2: Tamper2 interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__)       (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
+
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/**
+  * @brief  Check whether the specified RTC Tamper interrupt has been enabled or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_TAMP: Tamper interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+  * @brief  Get the selected RTC Tamper's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Tamper Flag is pending or not.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_TAMP1F 
+  *             @arg RTC_FLAG_TAMP2F
+  *             @arg RTC_FLAG_TAMP3F
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__)               (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+
+/**
+  * @brief  Clear the RTC Tamper's pending flags.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Tamper Flag to clear.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_TAMP1F
+  *             @arg RTC_FLAG_TAMP2F
+  *             @arg RTC_FLAG_TAMP3F  
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)      ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+#else
+
+/**
+  * @brief  Get the selected RTC Tamper's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Tamper Flag is pending or not.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_TAMP1F 
+  *             @arg RTC_FLAG_TAMP2F  
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__)               (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+
+/**
+  * @brief  Clear the RTC Tamper's pending flags.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Tamper Flag to clear.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_TAMP1F
+  *             @arg RTC_FLAG_TAMP2F 
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)      ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+/**
+  * @}
+  */
+
+/* --------------------------TAMPER/TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI
+  * @{
+  */
+  
+/* TAMPER TIMESTAMP EXTI */
+/* --------------------- */
+/**
+  * @brief  Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()        (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()       (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+  * @brief  Enable event on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT()    (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable event on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT()   (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+  * @brief  Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. 
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+  * @brief  Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+  * @brief  Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+  * @brief  Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * This parameter can be:
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+  * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
+  * @retval Line Status.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()         (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()       (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()    (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+/**
+  * @}
+  */
+
+/* ------------------------------Calibration----------------------------------*/
+/** @defgroup RTCEx_Calibration RTC Calibration
+  * @{
+  */
+
+/**
+  * @brief  Enable the RTC calibration output.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+  * @brief  Disable the calibration output.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+  * @brief  Enable the clock reference detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+  * @brief  Disable the clock reference detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+  * @brief  Get the selected RTC shift operation's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC shift operation Flag is pending or not.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_SHPF   
+  * @retval None
+  */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__)                (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
+  * @{
+  */
+
+/* RTC TimeStamp and Tamper functions *****************************************/
+/** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp and Tamper functions
+ * @{
+ */ 
+
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void              HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+
+void              HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+void              HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+void              HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
+#endif
+void              HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+#endif
+/**
+  * @}
+  */
+ 
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/* RTC Wake-up functions ******************************************************/
+/** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions
+ * @{
+ */ 
+ 
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+uint32_t          HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t          HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+void              HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+void              HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+#endif
+/**
+  * @}
+  */
+
+/* Extended Control functions ************************************************/
+/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions
+ * @{
+ */ 
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
+void              HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t          HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
+
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+/**
+  * @}
+  */
+  
+/* Extended RTC features functions *******************************************/
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/ 
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
+  * @{
+  */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT  ((uint32_t)EXTI_IMR_MR19)  /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */                                               
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT       ((uint32_t)EXTI_IMR_MR20)  /*!< External interrupt line 20 Connected to the RTC Wakeup event */                                               
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
+  * @{
+  */
+
+/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
+  * @{
+  */ 
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+                               ((OUTPUT) == RTC_OUTPUT_ALARMA)  || \
+                               ((OUTPUT) == RTC_OUTPUT_WAKEUP))
+#else
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+                               ((OUTPUT) == RTC_OUTPUT_ALARMA))
+#endif  
+  
+#define IS_RTC_BKP(BKP)                   ((BKP) < (uint32_t) RTC_BKP_NUMBER)  
+
+#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
+                                 ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFD6U) == 0x00) && ((TAMPER) != (uint32_t)RESET))
+
+#else
+#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFF6U) == 0x00) && ((TAMPER) != (uint32_t)RESET))
+
+#endif 
+								 
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT))
+
+
+#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
+                                        ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+                                        ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+                                        ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL)) 
+#define IS_RTC_TAMPER_FILTER(FILTER)  (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
+                                       ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
+                                       ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
+                                       ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
+#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512)  || \
+                                           ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+                                                    ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+                                                              ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
+                                           ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
+#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16)   || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8)    || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4)    || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2)    || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+                                    ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_RTC_WAKEUP_COUNTER(COUNTER)  ((COUNTER) <= 0xFFFF)
+
+
+#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+                                            ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+                                            ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) 
+#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+                                        ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+
+
+#define  IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
+#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
+                                 ((SEL) == RTC_SHIFTADD1S_SET)) 
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
+#define IS_RTC_CALIB_OUTPUT(OUTPUT)  (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
+                                      ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RTC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+