mbed official
mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
Diff: targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_dac_ex.c
- Revision:
- 149:156823d33999
- Parent:
- 144:ef7eb2e8f9f7
- Child:
- 156:95d6b41a828b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_dac_ex.c Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,1189 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dac_ex.c
+ * @author MCD Application Team
+ * @version V1.4.0
+ * @date 27-May-2016
+ * @brief DAC HAL module driver.
+ * This file provides firmware functions to manage the extended
+ * functionalities of the DAC peripheral.
+ *
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (+) When Dual mode is enabled (i.e. DAC Channel1 and Channel2 are used simultaneously) :
+ Use HAL_DACEx_DualGetValue() to get digital data to be converted and use
+ HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in Channel 1 and Channel 2.
+ (+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal.
+ (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+
+/** @addtogroup DAC
+ * @{
+ */
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @addtogroup DAC_Private_Functions
+ * @{
+ */
+static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma);
+static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma);
+static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+#endif /* STM32F051x8 STM32F058xx */
+ /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @addtogroup DAC_Private_Functions
+ * @{
+ */
+
+/* DAC_DMAConvCpltCh2 / DAC_DMAErrorCh2 / DAC_DMAHalfConvCpltCh2 */
+/* are set by HAL_DAC_Start_DMA */
+
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+/** @addtogroup DAC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group3
+ * @{
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/**
+ * @brief Configures the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param sConfig: DAC configuration structure.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel)
+{
+ uint32_t tmpreg1 = 0, tmpreg2 = 0;
+
+ /* Check the DAC parameters */
+ assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger));
+ assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer));
+ assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger));
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Get the DAC CR value */
+ tmpreg1 = hdac->Instance->CR;
+ /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
+ tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1 | DAC_CR_BOFF1)) << Channel);
+ /* Configure for the selected DAC channel: buffer output, trigger */
+ /* Set TSELx and TENx bits according to DAC_Trigger value */
+ /* Set BOFFx bit according to DAC_OutputBuffer value */
+ tmpreg2 = (sConfig->DAC_Trigger | sConfig->DAC_OutputBuffer);
+ /* Calculate CR register value depending on DAC_Channel */
+ tmpreg1 |= tmpreg2 << Channel;
+ /* Write to DAC CR */
+ hdac->Instance->CR = tmpreg1;
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined (STM32F051x8) || defined (STM32F058xx)
+
+/**
+ * @brief Configures the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param sConfig: DAC configuration structure.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel)
+{
+ uint32_t tmpreg1 = 0, tmpreg2 = 0;
+
+ /* Check the DAC parameters */
+ assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger));
+ assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer));
+ assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger));
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Get the DAC CR value */
+ tmpreg1 = hdac->Instance->CR;
+ /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
+ tmpreg1 &= ~(((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1 | DAC_CR_BOFF1)) << Channel);
+ /* Configure for the selected DAC channel: buffer output, trigger */
+ /* Set TSELx and TENx bits according to DAC_Trigger value */
+ /* Set BOFFx bit according to DAC_OutputBuffer value */
+ tmpreg2 = (sConfig->DAC_Trigger | sConfig->DAC_OutputBuffer);
+ /* Calculate CR register value depending on DAC_Channel */
+ tmpreg1 |= tmpreg2 << Channel;
+ /* Write to DAC CR */
+ hdac->Instance->CR = tmpreg1;
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+#endif /* STM32F051x8 STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+/* DAC 1 has 2 channels 1 & 2 */
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval The selected DAC channel data output value.
+ */
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Returns the DAC channel data output register value */
+ if(Channel == DAC_CHANNEL_1)
+ {
+ return hdac->Instance->DOR1;
+ }
+ else
+ {
+ return hdac->Instance->DOR2;
+ }
+}
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined (STM32F051x8) || defined (STM32F058xx)
+
+/* DAC 1 has 1 channels */
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @retval The selected DAC channel data output value.
+ */
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Returns the DAC channel data output register value */
+ return hdac->Instance->DOR1;
+}
+
+
+
+#endif /* STM32F051x8 STM32F058xx */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group2
+ * @{
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/**
+ * @brief Enables DAC and starts conversion of channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Enable the Peripharal */
+ __HAL_DAC_ENABLE(hdac, Channel);
+
+ if(Channel == DAC_CHANNEL_1)
+ {
+ /* Check if software trigger enabled */
+ if((hdac->Instance->CR & (DAC_CR_TEN1 | DAC_CR_TSEL1)) == (DAC_CR_TEN1 | DAC_CR_TSEL1))
+ {
+ /* Enable the selected DAC software conversion */
+ SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG1);
+ }
+ }
+ else
+ {
+ /* Check if software trigger enabled */
+ if((hdac->Instance->CR & (DAC_CR_TEN2 | DAC_CR_TSEL2)) == (DAC_CR_TEN2 | DAC_CR_TSEL2))
+ {
+ /* Enable the selected DAC software conversion*/
+ SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG2);
+ }
+ }
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables DAC and starts conversion of channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @arg DAC_CHANNEL_2: DAC Channel2 selected
+ * @param pData: The destination peripheral Buffer address.
+ * @param Length: The length of data to be transferred from memory to DAC peripheral
+ * @param Alignment: Specifies the data alignment for DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
+ * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
+ * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_ALIGN(Alignment));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ if(Channel == DAC_CHANNEL_1)
+ {
+ /* Set the DMA transfer complete callback for channel1 */
+ hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1;
+
+ /* Set the DMA half transfer complete callback for channel1 */
+ hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1;
+
+ /* Set the DMA error callback for channel1 */
+ hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1;
+
+ /* Enable the selected DAC channel1 DMA request */
+ SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN1);
+
+ /* Case of use of channel 1 */
+ switch(Alignment)
+ {
+ case DAC_ALIGN_12B_R:
+ /* Get DHR12R1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12R1;
+ break;
+ case DAC_ALIGN_12B_L:
+ /* Get DHR12L1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12L1;
+ break;
+ case DAC_ALIGN_8B_R:
+ /* Get DHR8R1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR8R1;
+ break;
+ default:
+ break;
+ }
+ }
+ else
+ {
+ /* Set the DMA transfer complete callback for channel2 */
+ hdac->DMA_Handle2->XferCpltCallback = DAC_DMAConvCpltCh2;
+
+ /* Set the DMA half transfer complete callback for channel2 */
+ hdac->DMA_Handle2->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh2;
+
+ /* Set the DMA error callback for channel2 */
+ hdac->DMA_Handle2->XferErrorCallback = DAC_DMAErrorCh2;
+
+ /* Enable the selected DAC channel2 DMA request */
+ SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN2);
+
+ /* Case of use of channel 2 */
+ switch(Alignment)
+ {
+ case DAC_ALIGN_12B_R:
+ /* Get DHR12R2 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12R2;
+ break;
+ case DAC_ALIGN_12B_L:
+ /* Get DHR12L2 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12L2;
+ break;
+ case DAC_ALIGN_8B_R:
+ /* Get DHR8R2 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR8R2;
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Enable the DMA channel */
+ if(Channel == DAC_CHANNEL_1)
+ {
+ /* Enable the DAC DMA underrun interrupt */
+ __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1);
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length);
+ }
+ else
+ {
+ /* Enable the DAC DMA underrun interrupt */
+ __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR2);
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length);
+ }
+
+ /* Enable the Peripharal */
+ __HAL_DAC_ENABLE(hdac, Channel);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined (STM32F051x8) || defined (STM32F058xx)
+
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Enable the Peripharal */
+ __HAL_DAC_ENABLE(hdac, Channel);
+
+ if(Channel == DAC_CHANNEL_1)
+ {
+ /* Check if software trigger enabled */
+ if((hdac->Instance->CR & (DAC_CR_TEN1 | DAC_CR_TSEL1)) == (DAC_CR_TEN1 | DAC_CR_TSEL1))
+ {
+ /* Enable the selected DAC software conversion */
+ SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG1);
+ }
+ }
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables DAC and starts conversion of channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_CHANNEL_1: DAC Channel1 selected
+ * @param pData: The destination peripheral Buffer address.
+ * @param Length: The length of data to be transferred from memory to DAC peripheral
+ * @param Alignment: Specifies the data alignment for DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
+ * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
+ * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_ALIGN(Alignment));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Set the DMA transfer complete callback for channel1 */
+ hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1;
+
+ /* Set the DMA half transfer complete callback for channel1 */
+ hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1;
+
+ /* Set the DMA error callback for channel1 */
+ hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1;
+
+ /* Enable the selected DAC channel1 DMA request */
+ SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN1);
+
+ /* Case of use of channel 1 */
+ switch(Alignment)
+ {
+ case DAC_ALIGN_12B_R:
+ /* Get DHR12R1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12R1;
+ break;
+ case DAC_ALIGN_12B_L:
+ /* Get DHR12L1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR12L1;
+ break;
+ case DAC_ALIGN_8B_R:
+ /* Get DHR8R1 address */
+ tmpreg = (uint32_t)&hdac->Instance->DHR8R1;
+ break;
+ default:
+ break;
+ }
+
+ /* Enable the DMA channel */
+ /* Enable the DAC DMA underrun interrupt */
+ __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1);
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length);
+
+ /* Enable the DAC DMA underrun interrupt */
+ __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1);
+
+ /* Enable the DMA channel */
+ HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length);
+
+ /* Enable the Peripharal */
+ __HAL_DAC_ENABLE(hdac, Channel);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+#endif /* STM32F051x8 STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+/* DAC channel 2 is available on top of DAC channel 1 */
+
+/**
+ * @brief Handles DAC interrupt request
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac)
+{
+ if(__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR1))
+ {
+ /* Check underrun channel 1 flag */
+ if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1))
+ {
+ /* Change DAC state to error state */
+ hdac->State = HAL_DAC_STATE_ERROR;
+
+ /* Set DAC error code to channel1 DMA underrun error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH1;
+
+ /* Clear the underrun flag */
+ __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR1);
+
+ /* Disable the selected DAC channel1 DMA request */
+ hdac->Instance->CR &= ~DAC_CR_DMAEN1;
+
+ /* Error callback */
+ HAL_DAC_DMAUnderrunCallbackCh1(hdac);
+ }
+ }
+ if(__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR2))
+ {
+ /* Check underrun channel 2 flag */
+ if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR2))
+ {
+ /* Change DAC state to error state */
+ hdac->State = HAL_DAC_STATE_ERROR;
+
+ /* Set DAC error code to channel2 DMA underrun error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH2;
+
+ /* Clear the underrun flag */
+ __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR2);
+
+ /* Disable the selected DAC channel1 DMA request */
+ hdac->Instance->CR &= ~DAC_CR_DMAEN2;
+
+ /* Error callback */
+ HAL_DACEx_DMAUnderrunCallbackCh2(hdac);
+ }
+ }
+}
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined (STM32F051x8) || defined (STM32F058xx)
+/* DAC channel 2 is NOT available. Only DAC channel 1 is available */
+
+/**
+ * @brief Handles DAC interrupt request
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac)
+{
+ if(__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR1))
+ {
+ /* Check Overrun flag */
+ if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1))
+ {
+ /* Change DAC state to error state */
+ hdac->State = HAL_DAC_STATE_ERROR;
+
+ /* Set DAC error code to chanel1 DMA underrun error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH1;
+
+ /* Clear the underrun flag */
+ __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR1);
+
+ /* Disable the selected DAC channel1 DMA request */
+ hdac->Instance->CR &= ~DAC_CR_DMAEN1;
+
+ /* Error callback */
+ HAL_DAC_DMAUnderrunCallbackCh1(hdac);
+ }
+ }
+}
+
+#endif /* STM32F051x8 STM32F058xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @addtogroup DAC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief DMA conversion complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_DAC_ConvCpltCallbackCh1(hdac);
+
+ hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+ * @brief DMA half transfer complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* Conversion complete callback */
+ HAL_DAC_ConvHalfCpltCallbackCh1(hdac);
+}
+
+/**
+ * @brief DMA error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Set DAC error code to DMA error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
+
+ HAL_DAC_ErrorCallbackCh1(hdac);
+
+ hdac->State= HAL_DAC_STATE_READY;
+}
+/**
+ * @}
+ */
+#endif /* STM32F051x8 STM32F058xx */
+ /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @addtogroup DAC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief DMA conversion complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ HAL_DACEx_ConvCpltCallbackCh2(hdac);
+
+ hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+ * @brief DMA half transfer complete callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+ /* Conversion complete callback */
+ HAL_DACEx_ConvHalfCpltCallbackCh2(hdac);
+}
+
+/**
+ * @brief DMA error callback
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma)
+{
+ DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Set DAC error code to DMA error */
+ hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
+
+ HAL_DACEx_ErrorCallbackCh2(hdac);
+
+ hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+ * @}
+ */
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup DACEx DACEx
+ * @brief DACEx driver module
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup DACEx_Private_Macros DACEx Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup DACEx_Exported_Functions DACEx Exported Functions
+ * @{
+ */
+
+/** @defgroup DACEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extended features functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Start conversion.
+ (+) Stop conversion.
+ (+) Start conversion and enable DMA transfer.
+ (+) Stop conversion and disable DMA transfer.
+ (+) Get result of conversion.
+ (+) Get result of dual mode conversion.
+
+@endverbatim
+ * @{
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval The selected DAC channel data output value.
+ */
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac)
+{
+ uint32_t tmp = 0;
+
+ tmp |= hdac->Instance->DOR1;
+
+ /* DAC channel 2 is present in DAC 1 */
+ tmp |= hdac->Instance->DOR2 << 16;
+
+ /* Returns the DAC channel data output register value */
+ return tmp;
+}
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined (STM32F051x8) || defined (STM32F058xx)
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval The selected DAC channel data output value.
+ */
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac)
+{
+ uint32_t tmp = 0;
+
+ tmp |= hdac->Instance->DOR1;
+
+ /* Returns the DAC channel data output register value */
+ return tmp;
+}
+
+#endif /* STM32F051x8 STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/**
+ * @brief Enables or disables the selected DAC channel wave generation.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * DAC_CHANNEL_1 / DAC_CHANNEL_2
+ * @param Amplitude: Select max triangle amplitude.
+ * This parameter can be one of the following values:
+ * @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1
+ * @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3
+ * @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7
+ * @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15
+ * @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31
+ * @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63
+ * @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127
+ * @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255
+ * @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511
+ * @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023
+ * @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047
+ * @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Enable the selected wave generation for the selected DAC channel */
+ MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1)|(DAC_CR_MAMP1))<<Channel, (DAC_CR_WAVE1_1 | Amplitude) << Channel);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables or disables the selected DAC channel wave generation.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Channel: The selected DAC channel.
+ * This parameter can be one of the following values:
+ * DAC_CHANNEL_1 / DAC_CHANNEL_2
+ * @param Amplitude: Unmask DAC channel LFSR for noise wave generation.
+ * This parameter can be one of the following values:
+ * @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation
+ * @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(Channel));
+ assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Enable the selected wave generation for the selected DAC channel */
+ MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1)|(DAC_CR_MAMP1))<<Channel, (DAC_CR_WAVE1_0 | Amplitude) << Channel);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @addtogroup DACEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DACEx_Exported_Functions_Group1
+ * @brief Extended features functions
+ * @{
+ */
+
+/**
+ * @brief Set the specified data holding register value for dual DAC channel.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @param Alignment: Specifies the data alignment for dual channel DAC.
+ * This parameter can be one of the following values:
+ * DAC_ALIGN_8B_R: 8bit right data alignment selected
+ * DAC_ALIGN_12B_L: 12bit left data alignment selected
+ * DAC_ALIGN_12B_R: 12bit right data alignment selected
+ * @param Data1: Data for DAC Channel2 to be loaded in the selected data holding register.
+ * @param Data2: Data for DAC Channel1 to be loaded in the selected data holding register.
+ * @note In dual mode, a unique register access is required to write in both
+ * DAC channels at the same time.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2)
+{
+ uint32_t data = 0, tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(Alignment));
+ assert_param(IS_DAC_DATA(Data1));
+ assert_param(IS_DAC_DATA(Data2));
+
+ /* Calculate and set dual DAC data holding register value */
+ if (Alignment == DAC_ALIGN_8B_R)
+ {
+ data = ((uint32_t)Data2 << 8) | Data1;
+ }
+ else
+ {
+ data = ((uint32_t)Data2 << 16) | Data1;
+ }
+
+ tmp = (uint32_t)hdac->Instance;
+ tmp += DAC_DHR12RD_ALIGNMENT(Alignment);
+
+ /* Set the dual DAC selected data holding register */
+ *(__IO uint32_t *)tmp = data;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F051x8 STM32F058xx */
+ /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @addtogroup DACEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DACEx_Exported_Functions_Group1
+ * @brief Extended features functions
+ * @{
+ */
+
+/**
+ * @brief Conversion complete callback in non blocking mode for Channel2
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ConvCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Conversion half DMA transfer callback in non blocking mode for Channel2
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ConvHalfCpltCallbackCh2 could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Error DAC callback for Channel2.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DMA underrun DAC callback for channel2.
+ * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval None
+ */
+__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdac);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DAC_DMAUnderrunCallbackCh2 could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F071xB STM32F072xB STM32F078xx */
+ /* STM32F091xC STM32F098xx */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
