Diff: targets/TARGET_NXP/TARGET_LPC11UXX/TARGET_APPNEARME_MICRONFCBOARD/PinNames.h

Revision:

149:156823d33999

Parent:

144:ef7eb2e8f9f7

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_NXP/TARGET_LPC11UXX/TARGET_APPNEARME_MICRONFCBOARD/PinNames.h	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,178 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  5
+
+typedef enum {
+    // LPC11U Pin Names
+    P0_0 = 0,
+    P0_1 = 1,
+    P0_2 = 2,
+    P0_3 = 3,
+    P0_4 = 4,
+    P0_5 = 5,
+    P0_6 = 6,
+    P0_7 = 7,
+    P0_8 = 8,
+    P0_9 = 9,
+    P0_10 = 10,
+    P0_11 = 11,
+    P0_12 = 12,
+    P0_13 = 13,
+    P0_14 = 14,
+    P0_15 = 15,
+    P0_16 = 16,
+    P0_17 = 17,
+    P0_18 = 18,
+    P0_19 = 19,
+    P0_20 = 20,
+    P0_21 = 21,
+    P0_22 = 22,
+    P0_23 = 23,
+    P0_24 = 24,
+    P0_25 = 25,
+    P0_26 = 26,
+    P0_27 = 27,
+
+    P1_0 = 32,
+    P1_1 = 33,
+    P1_2 = 34,
+    P1_3 = 35,
+    P1_4 = 36,
+    P1_5 = 37,
+    P1_6 = 38,
+    P1_7 = 39,
+    P1_8 = 40,
+    P1_9 = 41,
+    P1_10 = 42,
+    P1_11 = 43,
+    P1_12 = 44,
+    P1_13 = 45,
+    P1_14 = 46,
+    P1_15 = 47,
+    P1_16 = 48,
+    P1_17 = 49,
+    P1_18 = 50,
+    P1_19 = 51,
+    P1_20 = 52,
+    P1_21 = 53,
+    P1_22 = 54,
+    P1_23 = 55,
+    P1_24 = 56,
+    P1_25 = 57,
+    P1_26 = 58,
+    P1_27 = 59,
+    P1_28 = 60,
+    P1_29 = 61,
+
+    P1_31 = 63,
+    
+    // MicroNFCBoard pin names
+    M_RST = P0_0,
+    M_BOOT = P0_1,
+    M_RXD = P0_18,
+    M_TXD = P0_19,
+    M_SCL = P0_4,
+    M_SDA = P0_5,
+    M_D0 = P0_20,
+    
+    M_A0 = P0_16,
+    M_A1 = P0_15,
+    M_A2 = P0_14,
+    M_A3 = P0_13,
+    M_SCK = P0_10,
+    M_MOSI = P0_9,
+    M_MISO = P0_8,
+    M_NCS = P0_2,
+    M_IRQ = P0_7,
+
+    // MicroNFCBoard pin numbers
+    p4 = M_RST,
+    p5 = M_BOOT,
+    p6 = M_RXD,
+    p7 = M_TXD,
+    p8 = M_SCL,
+    p9 = M_SDA,
+    p10 = M_D0,
+    
+    p11 = M_IRQ,
+    p12 = M_NCS,
+    p13 = M_MISO,
+    p14 = M_MOSI,
+    p15 = M_SCK,
+    p16 = M_A3,
+    p17 = M_A2,
+    p18 = M_A1,
+    p19 = M_A0,
+    
+    // Other Pin Names
+    LED1 = P0_11,
+    LED2 = P0_12,
+    
+    // Alias to have correct blue lights of death pattern
+    LED3 = LED2,
+    LED4 = LED1,
+
+    UART_TX = M_TXD,
+    UART_RX = M_RXD,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+
+    // Standard but not supported pins
+    USBTX = NC,
+    USBRX = NC,
+
+} PinName;
+
+typedef enum {
+    CHANNEL0 = FLEX_INT0_IRQn,
+    CHANNEL1 = FLEX_INT1_IRQn,
+    CHANNEL2 = FLEX_INT2_IRQn,
+    CHANNEL3 = FLEX_INT3_IRQn,
+    CHANNEL4 = FLEX_INT4_IRQn,
+    CHANNEL5 = FLEX_INT5_IRQn,
+    CHANNEL6 = FLEX_INT6_IRQn,
+    CHANNEL7 = FLEX_INT7_IRQn
+} Channel;
+
+typedef enum {
+    PullUp = 2,
+    PullDown = 1,
+    PullNone = 0,
+    Repeater = 3,
+    OpenDrain = 4,
+    PullDefault = PullDown
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif