mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

Revision:
149:156823d33999
Parent:
144:ef7eb2e8f9f7
Child:
162:e13f6fdb2ac4
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Freescale/TARGET_KLXX/us_ticker.c	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,204 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <stddef.h>
+#include "us_ticker_api.h"
+#include "PeripheralNames.h"
+#include "clk_freqs.h"
+
+static void pit_init(void);
+static void lptmr_init(void);
+
+static int us_ticker_inited = 0;
+
+void us_ticker_init(void) {
+    if (us_ticker_inited) return;
+    us_ticker_inited = 1;
+    
+    pit_init();
+    lptmr_init();
+}
+
+/******************************************************************************
+ * Timer for us timing.
+ ******************************************************************************/
+static void pit_init(void) {
+    SIM->SCGC6 |= SIM_SCGC6_PIT_MASK;   // Clock PIT
+    PIT->MCR = 0;                       // Enable PIT
+    
+    // Channel 1
+    PIT->CHANNEL[1].LDVAL = 0xFFFFFFFF;
+    PIT->CHANNEL[1].TCTRL = PIT_TCTRL_CHN_MASK;    // Chain to timer 0, disable Interrupts
+    PIT->CHANNEL[1].TCTRL |= PIT_TCTRL_TEN_MASK;   // Start timer 1
+    
+    // Use channel 0 as a prescaler for channel 1
+    PIT->CHANNEL[0].LDVAL = (bus_frequency() + 500000) / 1000000 - 1;
+    PIT->CHANNEL[0].TCTRL = PIT_TCTRL_TEN_MASK;    // Start timer 0, disable interrupts
+}
+
+uint32_t us_ticker_read() {
+    if (!us_ticker_inited)
+        us_ticker_init();
+    
+    // The PIT is a countdown timer
+    return ~(PIT->CHANNEL[1].CVAL);
+}
+
+/******************************************************************************
+ * Timer Event
+ * 
+ * It schedules interrupts at given (32bit)us interval of time.
+ * It is implemented used the 16bit Low Power Timer that remains powered in all
+ * power modes.
+ ******************************************************************************/
+static void lptmr_isr(void);
+
+static void lptmr_init(void) {
+	uint32_t extosc;
+
+    /* Clock the timer */
+    SIM->SCGC5 |= SIM_SCGC5_LPTMR_MASK;
+    
+    /* Reset */
+    LPTMR0->CSR = 0;
+
+#if defined(TARGET_KL43Z)
+    /* Set interrupt handler */
+    NVIC_SetVector(LPTMR0_IRQn, (uint32_t)lptmr_isr);
+    NVIC_EnableIRQ(LPTMR0_IRQn);
+
+
+    MCG->C1 |= MCG_C1_IRCLKEN_MASK;
+    extosc = mcgirc_frequency();
+#else
+    /* Set interrupt handler */
+    NVIC_SetVector(LPTimer_IRQn, (uint32_t)lptmr_isr);
+    NVIC_EnableIRQ(LPTimer_IRQn);
+
+    /* Clock at (1)MHz -> (1)tick/us */
+    /* Check if the external oscillator can be divided to 1MHz */
+    extosc = extosc_frequency();
+#endif
+    if (extosc != 0) {                      //If external oscillator found
+        if (extosc % 1000000u == 0) {       //If it is a multiple if 1MHz
+            extosc /= 1000000;
+            if (extosc == 1)    {           //1MHz, set timerprescaler in bypass mode
+                LPTMR0->PSR = LPTMR_PSR_PCS(3) | LPTMR_PSR_PBYP_MASK;
+                return;
+            } else {                        //See if we can divide it to 1MHz
+                uint32_t divider = 0;
+                extosc >>= 1;
+                while (1) {
+                    if (extosc == 1) {
+                        LPTMR0->PSR = LPTMR_PSR_PCS(3) | LPTMR_PSR_PRESCALE(divider);
+                        return;
+                    }
+                    if (extosc % 2 != 0)    //If we can't divide by two anymore
+                        break;
+                    divider++;
+                    extosc >>= 1;
+                }
+            }
+        }
+    }
+#if defined(TARGET_KL43Z)
+    //No suitable actual IRC oscillator clock -> Set it to (8MHz / divider) 
+    MCG->SC &= ~MCG_SC_FCRDIV_MASK;
+    MCG->MC &= ~MCG->MC & MCG_MC_LIRC_DIV2_MASK;
+    LPTMR0->PSR = LPTMR_PSR_PCS(0) | LPTMR_PSR_PRESCALE(2);
+#else
+    //No suitable external oscillator clock -> Use fast internal oscillator (4MHz / divider)
+    MCG->C1 |= MCG_C1_IRCLKEN_MASK;
+    MCG->C2 |= MCG_C2_IRCS_MASK;
+    LPTMR0->PSR =  LPTMR_PSR_PCS(0);
+    switch (MCG->SC & MCG_SC_FCRDIV_MASK) {
+        case MCG_SC_FCRDIV(0):                  //4MHz
+            LPTMR0->PSR |= LPTMR_PSR_PRESCALE(1);
+            break;
+        case MCG_SC_FCRDIV(1):                  //2MHz
+            LPTMR0->PSR |= LPTMR_PSR_PRESCALE(0);
+            break;
+        default:                                //1MHz or anything else, in which case we put it on 1MHz
+            MCG->SC &= ~MCG_SC_FCRDIV_MASK;
+            MCG->SC |= MCG_SC_FCRDIV(2);
+            LPTMR0->PSR |= LPTMR_PSR_PBYP_MASK;
+    }
+#endif    
+}
+
+void us_ticker_disable_interrupt(void) {
+    LPTMR0->CSR &= ~LPTMR_CSR_TIE_MASK;
+}
+
+void us_ticker_clear_interrupt(void) {
+    // we already clear interrupt in lptmr_isr
+}
+
+static uint32_t us_ticker_int_counter = 0;
+static uint16_t us_ticker_int_remainder = 0;
+
+static void lptmr_set(unsigned short count) {
+    /* Reset */
+    LPTMR0->CSR = 0;
+    
+    /* Set the compare register */
+    LPTMR0->CMR = count;
+    
+    /* Enable interrupt */
+    LPTMR0->CSR |= LPTMR_CSR_TIE_MASK;
+    
+    /* Start the timer */
+    LPTMR0->CSR |= LPTMR_CSR_TEN_MASK;
+}
+
+static void lptmr_isr(void) {
+    // write 1 to TCF to clear the LPT timer compare flag
+    LPTMR0->CSR |= LPTMR_CSR_TCF_MASK;
+    
+    if (us_ticker_int_counter > 0) {
+        lptmr_set(0xFFFF);
+        us_ticker_int_counter--;
+    
+    } else {
+        if (us_ticker_int_remainder > 0) {
+            lptmr_set(us_ticker_int_remainder);
+            us_ticker_int_remainder = 0;
+        
+        } else {
+            // This function is going to disable the interrupts if there are
+            // no other events in the queue
+            us_ticker_irq_handler();
+        }
+    }
+}
+
+void us_ticker_set_interrupt(timestamp_t timestamp) {
+    int delta = (int)((uint32_t)timestamp - us_ticker_read());
+    if (delta <= 0) {
+        // This event was in the past:
+        us_ticker_irq_handler();
+        return;
+    }
+    
+    us_ticker_int_counter   = (uint32_t)(delta >> 16);
+    us_ticker_int_remainder = (uint16_t)(0xFFFF & delta);
+    if (us_ticker_int_counter > 0) {
+        lptmr_set(0xFFFF);
+        us_ticker_int_counter--;
+    } else {
+        lptmr_set(us_ticker_int_remainder);
+        us_ticker_int_remainder = 0;
+    }
+}