Diff: targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L432xC/TARGET_NUCLEO_L432KC/PinNames.h

Revision:

187:0387e8f68319

Parent:

186:707f6e361f3e

Child:

188:bcfe06ba3d64

--- a/targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L432xC/TARGET_NUCLEO_L432KC/PinNames.h	Fri Jun 22 16:45:37 2018 +0100
+++ b/targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L432xC/TARGET_NUCLEO_L432KC/PinNames.h	Thu Sep 06 13:40:20 2018 +0100
@@ -46,70 +46,70 @@
 } ALTx;
 
 typedef enum {
-  PA_0  = 0x00,
-  PA_1  = 0x01,
-  PA_2  = 0x02,
-  PA_2_ALT0 = PA_2|ALT0,
-  PA_3  = 0x03,
-  PA_3_ALT0 = PA_3|ALT0,
-  PA_4  = 0x04,
-  PA_4_ALT0 = PA_4|ALT0,
-  PA_5  = 0x05,
-  PA_6  = 0x06,
-  PA_7  = 0x07,
-  PA_8  = 0x08,
-  PA_9  = 0x09,
-  PA_10 = 0x0A,
-  PA_11 = 0x0B,
-  PA_12 = 0x0C,
-  PA_13 = 0x0D,
-  PA_14 = 0x0E,
-  PA_15 = 0x0F,
-  PA_15_ALT0 = PA_15|ALT0,
+    PA_0  = 0x00,
+    PA_1  = 0x01,
+    PA_2  = 0x02,
+    PA_2_ALT0 = PA_2 | ALT0,
+    PA_3  = 0x03,
+    PA_3_ALT0 = PA_3 | ALT0,
+    PA_4  = 0x04,
+    PA_4_ALT0 = PA_4 | ALT0,
+    PA_5  = 0x05,
+    PA_6  = 0x06,
+    PA_7  = 0x07,
+    PA_8  = 0x08,
+    PA_9  = 0x09,
+    PA_10 = 0x0A,
+    PA_11 = 0x0B,
+    PA_12 = 0x0C,
+    PA_13 = 0x0D,
+    PA_14 = 0x0E,
+    PA_15 = 0x0F,
+    PA_15_ALT0 = PA_15 | ALT0,
 
-  PB_0  = 0x10,
-  PB_1  = 0x11,
-  PB_2  = 0x12,
-  PB_3  = 0x13,
-  PB_3_ALT0 = PB_3|ALT0,
-  PB_4  = 0x14,
-  PB_4_ALT0 = PB_4|ALT0,
-  PB_5  = 0x15,
-  PB_5_ALT0 = PB_5|ALT0,
-  PB_6  = 0x16,
-  PB_7  = 0x17,
+    PB_0  = 0x10,
+    PB_1  = 0x11,
+    PB_2  = 0x12,
+    PB_3  = 0x13,
+    PB_3_ALT0 = PB_3 | ALT0,
+    PB_4  = 0x14,
+    PB_4_ALT0 = PB_4 | ALT0,
+    PB_5  = 0x15,
+    PB_5_ALT0 = PB_5 | ALT0,
+    PB_6  = 0x16,
+    PB_7  = 0x17,
 
-  PC_14 = 0x2E,
-  PC_15 = 0x2F,
+    PC_14 = 0x2E,
+    PC_15 = 0x2F,
 
-  // ADC internal channels
-  ADC_TEMP = 0xF0,
-  ADC_VREF = 0xF1,
-  ADC_VBAT = 0xF2,
+    // ADC internal channels
+    ADC_TEMP = 0xF0,
+    ADC_VREF = 0xF1,
+    ADC_VBAT = 0xF2,
 
-  // Arduino connector namings
-  A0          = PA_0,
-  A1          = PA_1,
-  A2          = PA_3,
-  A3          = PA_4,
-  A4          = PA_5,
-  A5          = PA_6,
-  A6          = PA_7,
-  A7          = PA_2,
-  D0          = PA_10,
-  D1          = PA_9,
-  D2          = PA_12,
-  D3          = PB_0,
-  D4          = PB_7,
-  D5          = PB_6,
-  D6          = PB_1,
-  D7          = PC_14,
-  D8          = PC_15,
-  D9          = PA_8,
-  D10         = PA_11,
-  D11         = PB_5,
-  D12         = PB_4,
-  D13         = PB_3,
+    // Arduino connector namings
+    A0          = PA_0,
+    A1          = PA_1,
+    A2          = PA_3,
+    A3          = PA_4,
+    A4          = PA_5,
+    A5          = PA_6,
+    A6          = PA_7,
+    A7          = PA_2,
+    D0          = PA_10,
+    D1          = PA_9,
+    D2          = PA_12,
+    D3          = PB_0,
+    D4          = PB_7,
+    D5          = PB_6,
+    D6          = PB_1,
+    D7          = PC_14,
+    D8          = PC_15,
+    D9          = PA_8,
+    D10         = PA_11,
+    D11         = PB_5,
+    D12         = PB_4,
+    D13         = PB_3,
 
     // STDIO for console print
 #ifdef MBED_CONF_TARGET_STDIO_UART_TX
@@ -123,33 +123,33 @@
     STDIO_UART_RX = PA_15,
 #endif
 
-  // Generic signals namings
-  LED1        = PB_3,
-  LED2        = PB_3,
-  LED3        = PB_3,
-  LED4        = PB_3,
-  SERIAL_TX   = STDIO_UART_TX,
-  SERIAL_RX   = STDIO_UART_RX,
-  USBTX       = STDIO_UART_TX,
-  USBRX       = STDIO_UART_RX,
-  I2C_SCL     = PB_6,
-  I2C_SDA     = PB_7,
-  SPI_MOSI    = PB_5,
-  SPI_MISO    = PB_4,
-  SPI_SCK     = PB_3,
-  SPI_CS      = PA_11,
-  PWM_OUT     = PB_0,
+    // Generic signals namings
+    LED1        = PB_3,
+    LED2        = PB_3,
+    LED3        = PB_3,
+    LED4        = PB_3,
+    SERIAL_TX   = STDIO_UART_TX,
+    SERIAL_RX   = STDIO_UART_RX,
+    USBTX       = STDIO_UART_TX,
+    USBRX       = STDIO_UART_RX,
+    I2C_SCL     = PB_6,
+    I2C_SDA     = PB_7,
+    SPI_MOSI    = PB_5,
+    SPI_MISO    = PB_4,
+    SPI_SCK     = PB_3,
+    SPI_CS      = PA_11,
+    PWM_OUT     = PB_0,
 
-/**** USB pins ****/
+    /**** USB pins ****/
     USB_DM = PA_11,
     USB_DP = PA_12,
     USB_NOE = PA_13,
 
-/**** OSCILLATOR pins ****/
+    /**** OSCILLATOR pins ****/
     RCC_OSC32_IN = PC_14,
     RCC_OSC32_OUT = PC_15,
 
-/**** DEBUG pins ****/
+    /**** DEBUG pins ****/
     SYS_JTCK_SWCLK = PA_14,
     SYS_JTDI = PA_15,
     SYS_JTDO_SWO = PB_3,