mbed official / mbed-dev

mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

targets/TARGET_NXP/TARGET_LPC176X/TARGET_UBLOX_C027/PinNames.h@189:f392fc9709a3, 2019-02-20 (annotated)

Committer:
AnnaBridge
Date:
Wed Feb 20 22:31:08 2019 +0000
Revision:
189:f392fc9709a3
Parent:
167:e84263d55307 
mbed library release version 165

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 144:ef7eb2e8f9f7 1 /* mbed Microcontroller Library
<> 144:ef7eb2e8f9f7 2 * Copyright (c) 2006-2013 ARM Limited
<> 144:ef7eb2e8f9f7 3 *
<> 144:ef7eb2e8f9f7 4 * Licensed under the Apache License, Version 2.0 (the "License");
<> 144:ef7eb2e8f9f7 5 * you may not use this file except in compliance with the License.
<> 144:ef7eb2e8f9f7 6 * You may obtain a copy of the License at
<> 144:ef7eb2e8f9f7 7 *
<> 144:ef7eb2e8f9f7 8 * http://www.apache.org/licenses/LICENSE-2.0
<> 144:ef7eb2e8f9f7 9 *
<> 144:ef7eb2e8f9f7 10 * Unless required by applicable law or agreed to in writing, software
<> 144:ef7eb2e8f9f7 11 * distributed under the License is distributed on an "AS IS" BASIS,
<> 144:ef7eb2e8f9f7 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
<> 144:ef7eb2e8f9f7 13 * See the License for the specific language governing permissions and
<> 144:ef7eb2e8f9f7 14 * limitations under the License.
<> 144:ef7eb2e8f9f7 15 */
<> 144:ef7eb2e8f9f7 16 #ifndef MBED_PINNAMES_H
<> 144:ef7eb2e8f9f7 17 #define MBED_PINNAMES_H
<> 144:ef7eb2e8f9f7 18
<> 144:ef7eb2e8f9f7 19 #include "cmsis.h"
<> 144:ef7eb2e8f9f7 20
<> 144:ef7eb2e8f9f7 21 #ifdef __cplusplus
<> 144:ef7eb2e8f9f7 22 extern "C" {
<> 144:ef7eb2e8f9f7 23 #endif
<> 144:ef7eb2e8f9f7 24
<> 144:ef7eb2e8f9f7 25 typedef enum {
<> 144:ef7eb2e8f9f7 26 PIN_INPUT,
<> 144:ef7eb2e8f9f7 27 PIN_OUTPUT
<> 144:ef7eb2e8f9f7 28 } PinDirection;
<> 144:ef7eb2e8f9f7 29
<> 144:ef7eb2e8f9f7 30 #define PORT_SHIFT 5
<> 144:ef7eb2e8f9f7 31
<> 144:ef7eb2e8f9f7 32 typedef enum {
<> 144:ef7eb2e8f9f7 33 // LPC Pin Names
<> 144:ef7eb2e8f9f7 34 P0_0 = LPC_GPIO0_BASE,
<> 144:ef7eb2e8f9f7 35 P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
<> 144:ef7eb2e8f9f7 36 P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
<> 144:ef7eb2e8f9f7 37 P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31,
<> 144:ef7eb2e8f9f7 38 P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31,
<> 144:ef7eb2e8f9f7 39 P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31,
<> 144:ef7eb2e8f9f7 40
<> 144:ef7eb2e8f9f7 41 // Arduino Pin Names
<> 144:ef7eb2e8f9f7 42
<> 144:ef7eb2e8f9f7 43 // PIN header connector
<> 144:ef7eb2e8f9f7 44 // for standard-based form factor with expansion board
<> 144:ef7eb2e8f9f7 45 // -----------------------------------------------------------
<> 144:ef7eb2e8f9f7 46 // PMW = Pulswidth Modulator
<> 144:ef7eb2e8f9f7 47 // EINT = External Interrupt
<> 144:ef7eb2e8f9f7 48 // AOUT = Analog Output
<> 144:ef7eb2e8f9f7 49
<> 144:ef7eb2e8f9f7 50 // Analog Ports (A0-A5)
<> 144:ef7eb2e8f9f7 51 A0 = P0_23, // I2S_CLK
<> 144:ef7eb2e8f9f7 52 A1 = P0_24, // I2S_WS
<> 144:ef7eb2e8f9f7 53 A2 = P0_25, // I2S_SDA
<> 144:ef7eb2e8f9f7 54 A3 = P0_26, // AOUT
<> 144:ef7eb2e8f9f7 55 A4 = P1_30, //
<> 144:ef7eb2e8f9f7 56 A5 = P1_31, //
<> 144:ef7eb2e8f9f7 57 // Digital Port (D0-D7)
<> 144:ef7eb2e8f9f7 58 D0 = P4_29, // TXD
<> 144:ef7eb2e8f9f7 59 D1 = P4_28, // RXD
<> 144:ef7eb2e8f9f7 60 D2 = P2_13, // EINT
<> 144:ef7eb2e8f9f7 61 D3 = P2_0, // PWM
<> 144:ef7eb2e8f9f7 62 D4 = P2_12, // EINT
<> 144:ef7eb2e8f9f7 63 D5 = P2_1, // PWM
<> 144:ef7eb2e8f9f7 64 D6 = P2_2, // PWM
<> 144:ef7eb2e8f9f7 65 D7 = P2_11, // EINT
<> 144:ef7eb2e8f9f7 66 // Digital Port (D8-D13)
<> 144:ef7eb2e8f9f7 67 D8 = P2_4, // PWM
<> 144:ef7eb2e8f9f7 68 D9 = P2_3, // PWM
<> 144:ef7eb2e8f9f7 69 D10 = P1_21, // PWM SSEL
<> 144:ef7eb2e8f9f7 70 D11 = P1_24, // PWM MOSI
<> 144:ef7eb2e8f9f7 71 D12 = P1_23, // PWM MISO
<> 144:ef7eb2e8f9f7 72 D13 = P1_20, // PWM SCK
<> 144:ef7eb2e8f9f7 73 // GND
<> 144:ef7eb2e8f9f7 74 // AREF
<> 144:ef7eb2e8f9f7 75 SDA = P0_0,
<> 144:ef7eb2e8f9f7 76 D14 = SDA,
<> 144:ef7eb2e8f9f7 77 SCL = P0_1,
<> 144:ef7eb2e8f9f7 78 D15 = SCL,
<> 144:ef7eb2e8f9f7 79
<> 144:ef7eb2e8f9f7 80 // I2C (shared with LISA/SARA)
<> 144:ef7eb2e8f9f7 81 GPSSDA = P0_27,
<> 144:ef7eb2e8f9f7 82 GPSSCL = P0_28,
<> 144:ef7eb2e8f9f7 83 // UART
<> 144:ef7eb2e8f9f7 84 GPSTXD = P0_10,
<> 144:ef7eb2e8f9f7 85 GPSRXD = P0_11,
<> 144:ef7eb2e8f9f7 86 // Control
<> 144:ef7eb2e8f9f7 87 GPSRST = P1_18, // Reset (input to GPS, active low)
<> 144:ef7eb2e8f9f7 88 GPSPPS = P1_19, // 1PPS Timepulse (output from GPS)
<> 144:ef7eb2e8f9f7 89 GPSINT = P1_22, // Interrupt (input to GPS)
<> 144:ef7eb2e8f9f7 90 GPSEN = P1_29, // Supply Control (high = enabled)
<> 144:ef7eb2e8f9f7 91
<> 144:ef7eb2e8f9f7 92 // u-blox LISA/SARA cellular modem
<> 144:ef7eb2e8f9f7 93 // http://www.u-blox.com/wireless-modules.html
<> 144:ef7eb2e8f9f7 94 // -----------------------------------------------------------
<> 144:ef7eb2e8f9f7 95 // UART (LPC1768 = DTE, LISA/SARA = DCE)
<> 144:ef7eb2e8f9f7 96 MDMTXD = P0_15, // Transmit Data
<> 144:ef7eb2e8f9f7 97 MDMRXD = P0_16, // Receive Data
<> 144:ef7eb2e8f9f7 98 MDMCTS = P0_17, // Clear to Send
<> 144:ef7eb2e8f9f7 99 MDMDCD = P0_18, // Data Carrier Detect
<> 144:ef7eb2e8f9f7 100 MDMDSR = P0_19, // Data Set Ready
<> 144:ef7eb2e8f9f7 101 MDMDTR = P0_20, // Data Terminal Ready (set high or use handshake)
<> 144:ef7eb2e8f9f7 102 MDMRI = P0_21, // Ring Indicator
<> 144:ef7eb2e8f9f7 103 MDMRTS = P0_22, // Request to Send (set high or use handshake)
<> 144:ef7eb2e8f9f7 104
<> 144:ef7eb2e8f9f7 105 // USB (not available on C27-G35)
<> 144:ef7eb2e8f9f7 106 MDMUSBDP = P0_29, // USB D+
<> 144:ef7eb2e8f9f7 107 MDMUSBDN = P0_30, // USB D-
<> 144:ef7eb2e8f9f7 108 MDMUSBCON = P2_9, // USB Connect
<> 144:ef7eb2e8f9f7 109 MDMUSBDET = P0_7, // USB Detect (n/a on REV.A board)
<> 144:ef7eb2e8f9f7 110 // Control
<> 144:ef7eb2e8f9f7 111 MDMEN = P2_5, // Supply Control (high = enabled)
<> 144:ef7eb2e8f9f7 112 MDMPWRON = P2_6, //
<> 144:ef7eb2e8f9f7 113 MDMGPIO1 = P2_7, // GPIO1, Network status
<> 144:ef7eb2e8f9f7 114 MDMRST = P2_8, // Reset (active low, set as open drain!)
<> 144:ef7eb2e8f9f7 115 MDMLVLOE = P0_9, // Serial/GPIO Level Shifter Output Enable (n/a on REV.A board)
<> 144:ef7eb2e8f9f7 116 MDMILVLOE = P0_8, // I2C Level Shifter Output Enable (n/a on REV.A board)
<> 144:ef7eb2e8f9f7 117
<> 144:ef7eb2e8f9f7 118 // CAN (TJA1040)
<> 144:ef7eb2e8f9f7 119 // -----------------------------------------------------------
<> 144:ef7eb2e8f9f7 120 CANRD = P0_4,
<> 144:ef7eb2e8f9f7 121 CANTD = P0_5,
<> 144:ef7eb2e8f9f7 122 CANS = P0_6, // standby (low=normal, high=standby/rxonly)
<> 144:ef7eb2e8f9f7 123
<> 144:ef7eb2e8f9f7 124 // Ethernet (DP83848)
<> 144:ef7eb2e8f9f7 125 // -----------------------------------------------------------
<> 144:ef7eb2e8f9f7 126 ETHTXD0 = P1_0,
<> 144:ef7eb2e8f9f7 127 ETHTXD1 = P1_1,
<> 144:ef7eb2e8f9f7 128 ETHTXEN = P1_4,
<> 144:ef7eb2e8f9f7 129 ETHCRS = P1_8,
<> 144:ef7eb2e8f9f7 130 ETHRXD0 = P1_9,
<> 144:ef7eb2e8f9f7 131 ETHRXD1 = P1_10,
<> 144:ef7eb2e8f9f7 132 ETHRXEN = P1_14,
<> 144:ef7eb2e8f9f7 133 ETHREFCLK = P1_15,
<> 144:ef7eb2e8f9f7 134 ETHMDC = P1_16,
<> 144:ef7eb2e8f9f7 135 ETHMDIO = P1_17,
<> 144:ef7eb2e8f9f7 136 ETHOSCEN = P1_27,
<> 144:ef7eb2e8f9f7 137 ETHRST = P1_28,
<> 144:ef7eb2e8f9f7 138 ETHLINK = P1_25, // LED_LINK
<> 144:ef7eb2e8f9f7 139 ETHSPEED = P1_26, // LED_SPEED
<> 144:ef7eb2e8f9f7 140
<> 144:ef7eb2e8f9f7 141 // ISP port
<> 144:ef7eb2e8f9f7 142 // -----------------------------------------------------------
<> 144:ef7eb2e8f9f7 143 ISP = P2_10,
<> 144:ef7eb2e8f9f7 144
<> 144:ef7eb2e8f9f7 145 // Other mbed Pin Names
<> 144:ef7eb2e8f9f7 146 LED = P3_25,
<> 144:ef7eb2e8f9f7 147 LED1 = LED,
<> 144:ef7eb2e8f9f7 148 LED2 = LED,
<> 144:ef7eb2e8f9f7 149 LED3 = LED,
<> 144:ef7eb2e8f9f7 150 LED4 = LED,
<> 144:ef7eb2e8f9f7 151 LED_RED = LED,
<> 144:ef7eb2e8f9f7 152
<> 144:ef7eb2e8f9f7 153 // mbed / debug IF (LPC11)
<> 144:ef7eb2e8f9f7 154 // -----------------------------------------------------------
<> 144:ef7eb2e8f9f7 155 // Serial Port
<> 144:ef7eb2e8f9f7 156 USBTX = P0_2,
<> 144:ef7eb2e8f9f7 157 USBRX = P0_3,
<> 144:ef7eb2e8f9f7 158 USBTXD = USBTX, // identical USBTX
<> 144:ef7eb2e8f9f7 159 USBRXD = USBRX, // identical USBRX
<> 144:ef7eb2e8f9f7 160
<> 144:ef7eb2e8f9f7 161 // Not connected
<> 144:ef7eb2e8f9f7 162 NC = (int)0xFFFFFFFF
<> 144:ef7eb2e8f9f7 163 } PinName;
<> 144:ef7eb2e8f9f7 164
AnnaBridge 167:e84263d55307 165 #define ACTIVE_HIGH_POLARITY 1
AnnaBridge 167:e84263d55307 166 #define ACTIVE_LOW_POLARITY 0
AnnaBridge 167:e84263d55307 167
AnnaBridge 167:e84263d55307 168 #define MDM_PIN_POLARITY ACTIVE_LOW_POLARITY
AnnaBridge 167:e84263d55307 169
<> 144:ef7eb2e8f9f7 170 typedef enum {
<> 144:ef7eb2e8f9f7 171 PullUp = 0,
<> 144:ef7eb2e8f9f7 172 PullDown = 3,
<> 144:ef7eb2e8f9f7 173 PullNone = 2,
<> 144:ef7eb2e8f9f7 174 Repeater = 1,
<> 144:ef7eb2e8f9f7 175 OpenDrain = 4,
<> 144:ef7eb2e8f9f7 176 PullDefault = PullDown
<> 144:ef7eb2e8f9f7 177 } PinMode;
<> 144:ef7eb2e8f9f7 178
<> 144:ef7eb2e8f9f7 179 // version of PINCON_TypeDef using register arrays
<> 144:ef7eb2e8f9f7 180 typedef struct {
<> 144:ef7eb2e8f9f7 181 __IO uint32_t PINSEL[11];
<> 144:ef7eb2e8f9f7 182 uint32_t RESERVED0[5];
<> 144:ef7eb2e8f9f7 183 __IO uint32_t PINMODE[10];
<> 144:ef7eb2e8f9f7 184 __IO uint32_t PINMODE_OD[5];
<> 144:ef7eb2e8f9f7 185 } PINCONARRAY_TypeDef;
<> 144:ef7eb2e8f9f7 186
<> 144:ef7eb2e8f9f7 187 #define PINCONARRAY ((PINCONARRAY_TypeDef *)LPC_PINCON_BASE)
<> 144:ef7eb2e8f9f7 188
<> 144:ef7eb2e8f9f7 189 //Additional C027 stuff
<> 144:ef7eb2e8f9f7 190 #define GPSADR (66<<1) // GPS I2C Address
<> 144:ef7eb2e8f9f7 191 #define GPSBAUD 9600 // Default GPS Baud Rate
<> 144:ef7eb2e8f9f7 192 #define MDMBAUD 115200 // Default Modem Baud Rate
<> 144:ef7eb2e8f9f7 193
<> 144:ef7eb2e8f9f7 194 #ifdef __cplusplus
<> 144:ef7eb2e8f9f7 195 }
<> 144:ef7eb2e8f9f7 196 #endif
<> 144:ef7eb2e8f9f7 197
<> 144:ef7eb2e8f9f7 198 #endif