mbed official / mbed-dev

mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

targets/hal/TARGET_NXP/TARGET_LPC11UXX/i2c_api.c@0:9b334a45a8ff, 2015-10-01 (annotated)

Committer:
bogdanm
Date:
Thu Oct 01 15:25:22 2015 +0300
Revision:
0:9b334a45a8ff
Child:
144:ef7eb2e8f9f7
Initial commit on mbed-dev



Replaces mbed-src (now inactive)

Who changed what in which revision?

UserRevisionLine numberNew contents of line
bogdanm 0:9b334a45a8ff 1 /* mbed Microcontroller Library
bogdanm 0:9b334a45a8ff 2 * Copyright (c) 2006-2013 ARM Limited
bogdanm 0:9b334a45a8ff 3 *
bogdanm 0:9b334a45a8ff 4 * Licensed under the Apache License, Version 2.0 (the "License");
bogdanm 0:9b334a45a8ff 5 * you may not use this file except in compliance with the License.
bogdanm 0:9b334a45a8ff 6 * You may obtain a copy of the License at
bogdanm 0:9b334a45a8ff 7 *
bogdanm 0:9b334a45a8ff 8 * http://www.apache.org/licenses/LICENSE-2.0
bogdanm 0:9b334a45a8ff 9 *
bogdanm 0:9b334a45a8ff 10 * Unless required by applicable law or agreed to in writing, software
bogdanm 0:9b334a45a8ff 11 * distributed under the License is distributed on an "AS IS" BASIS,
bogdanm 0:9b334a45a8ff 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
bogdanm 0:9b334a45a8ff 13 * See the License for the specific language governing permissions and
bogdanm 0:9b334a45a8ff 14 * limitations under the License.
bogdanm 0:9b334a45a8ff 15 */
bogdanm 0:9b334a45a8ff 16 #include "mbed_assert.h"
bogdanm 0:9b334a45a8ff 17 #include "i2c_api.h"
bogdanm 0:9b334a45a8ff 18 #include "cmsis.h"
bogdanm 0:9b334a45a8ff 19 #include "pinmap.h"
bogdanm 0:9b334a45a8ff 20 #include "PeripheralPins.h" // For the Peripheral to Pin Definitions found in the individual Target's Platform
bogdanm 0:9b334a45a8ff 21
bogdanm 0:9b334a45a8ff 22 #define I2C_CONSET(x) (x->i2c->CONSET)
bogdanm 0:9b334a45a8ff 23 #define I2C_CONCLR(x) (x->i2c->CONCLR)
bogdanm 0:9b334a45a8ff 24 #define I2C_STAT(x) (x->i2c->STAT)
bogdanm 0:9b334a45a8ff 25 #define I2C_DAT(x) (x->i2c->DAT)
bogdanm 0:9b334a45a8ff 26 #define I2C_SCLL(x, val) (x->i2c->SCLL = val)
bogdanm 0:9b334a45a8ff 27 #define I2C_SCLH(x, val) (x->i2c->SCLH = val)
bogdanm 0:9b334a45a8ff 28
bogdanm 0:9b334a45a8ff 29 static const uint32_t I2C_addr_offset[2][4] = {
bogdanm 0:9b334a45a8ff 30 {0x0C, 0x20, 0x24, 0x28},
bogdanm 0:9b334a45a8ff 31 {0x30, 0x34, 0x38, 0x3C}
bogdanm 0:9b334a45a8ff 32 };
bogdanm 0:9b334a45a8ff 33
bogdanm 0:9b334a45a8ff 34 static inline void i2c_conclr(i2c_t *obj, int start, int stop, int interrupt, int acknowledge) {
bogdanm 0:9b334a45a8ff 35 I2C_CONCLR(obj) = (start << 5)
bogdanm 0:9b334a45a8ff 36 | (stop << 4)
bogdanm 0:9b334a45a8ff 37 | (interrupt << 3)
bogdanm 0:9b334a45a8ff 38 | (acknowledge << 2);
bogdanm 0:9b334a45a8ff 39 }
bogdanm 0:9b334a45a8ff 40
bogdanm 0:9b334a45a8ff 41 static inline void i2c_conset(i2c_t *obj, int start, int stop, int interrupt, int acknowledge) {
bogdanm 0:9b334a45a8ff 42 I2C_CONSET(obj) = (start << 5)
bogdanm 0:9b334a45a8ff 43 | (stop << 4)
bogdanm 0:9b334a45a8ff 44 | (interrupt << 3)
bogdanm 0:9b334a45a8ff 45 | (acknowledge << 2);
bogdanm 0:9b334a45a8ff 46 }
bogdanm 0:9b334a45a8ff 47
bogdanm 0:9b334a45a8ff 48 // Clear the Serial Interrupt (SI)
bogdanm 0:9b334a45a8ff 49 static inline void i2c_clear_SI(i2c_t *obj) {
bogdanm 0:9b334a45a8ff 50 i2c_conclr(obj, 0, 0, 1, 0);
bogdanm 0:9b334a45a8ff 51 }
bogdanm 0:9b334a45a8ff 52
bogdanm 0:9b334a45a8ff 53 static inline int i2c_status(i2c_t *obj) {
bogdanm 0:9b334a45a8ff 54 return I2C_STAT(obj);
bogdanm 0:9b334a45a8ff 55 }
bogdanm 0:9b334a45a8ff 56
bogdanm 0:9b334a45a8ff 57 // Wait until the Serial Interrupt (SI) is set
bogdanm 0:9b334a45a8ff 58 static int i2c_wait_SI(i2c_t *obj) {
bogdanm 0:9b334a45a8ff 59 int timeout = 0;
bogdanm 0:9b334a45a8ff 60 while (!(I2C_CONSET(obj) & (1 << 3))) {
bogdanm 0:9b334a45a8ff 61 timeout++;
bogdanm 0:9b334a45a8ff 62 if (timeout > 100000) return -1;
bogdanm 0:9b334a45a8ff 63 }
bogdanm 0:9b334a45a8ff 64 return 0;
bogdanm 0:9b334a45a8ff 65 }
bogdanm 0:9b334a45a8ff 66
bogdanm 0:9b334a45a8ff 67 static inline void i2c_interface_enable(i2c_t *obj) {
bogdanm 0:9b334a45a8ff 68 I2C_CONSET(obj) = 0x40;
bogdanm 0:9b334a45a8ff 69 }
bogdanm 0:9b334a45a8ff 70
bogdanm 0:9b334a45a8ff 71 static inline void i2c_power_enable(i2c_t *obj) {
bogdanm 0:9b334a45a8ff 72 LPC_SYSCON->SYSAHBCLKCTRL |= (1 << 5);
bogdanm 0:9b334a45a8ff 73 LPC_SYSCON->PRESETCTRL |= 1 << 1;
bogdanm 0:9b334a45a8ff 74 }
bogdanm 0:9b334a45a8ff 75
bogdanm 0:9b334a45a8ff 76 void i2c_init(i2c_t *obj, PinName sda, PinName scl) {
bogdanm 0:9b334a45a8ff 77 // determine the SPI to use
bogdanm 0:9b334a45a8ff 78 I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
bogdanm 0:9b334a45a8ff 79 I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
bogdanm 0:9b334a45a8ff 80 obj->i2c = (LPC_I2C_Type *)pinmap_merge(i2c_sda, i2c_scl);
bogdanm 0:9b334a45a8ff 81 MBED_ASSERT((int)obj->i2c != NC);
bogdanm 0:9b334a45a8ff 82
bogdanm 0:9b334a45a8ff 83 // enable power
bogdanm 0:9b334a45a8ff 84 i2c_power_enable(obj);
bogdanm 0:9b334a45a8ff 85
bogdanm 0:9b334a45a8ff 86 // set default frequency at 100k
bogdanm 0:9b334a45a8ff 87 i2c_frequency(obj, 100000);
bogdanm 0:9b334a45a8ff 88 i2c_conclr(obj, 1, 1, 1, 1);
bogdanm 0:9b334a45a8ff 89 i2c_interface_enable(obj);
bogdanm 0:9b334a45a8ff 90
bogdanm 0:9b334a45a8ff 91 pinmap_pinout(sda, PinMap_I2C_SDA);
bogdanm 0:9b334a45a8ff 92 pinmap_pinout(scl, PinMap_I2C_SCL);
bogdanm 0:9b334a45a8ff 93 }
bogdanm 0:9b334a45a8ff 94
bogdanm 0:9b334a45a8ff 95 inline int i2c_start(i2c_t *obj) {
bogdanm 0:9b334a45a8ff 96 int status = 0;
bogdanm 0:9b334a45a8ff 97 // 8.1 Before master mode can be entered, I2CON must be initialised to:
bogdanm 0:9b334a45a8ff 98 // - I2EN STA STO SI AA - -
bogdanm 0:9b334a45a8ff 99 // - 1 0 0 0 x - -
bogdanm 0:9b334a45a8ff 100 // if AA = 0, it can't enter slave mode
bogdanm 0:9b334a45a8ff 101 i2c_conclr(obj, 1, 1, 1, 1);
bogdanm 0:9b334a45a8ff 102
bogdanm 0:9b334a45a8ff 103 // The master mode may now be entered by setting the STA bit
bogdanm 0:9b334a45a8ff 104 // this will generate a start condition when the bus becomes free
bogdanm 0:9b334a45a8ff 105 i2c_conset(obj, 1, 0, 0, 1);
bogdanm 0:9b334a45a8ff 106
bogdanm 0:9b334a45a8ff 107 i2c_wait_SI(obj);
bogdanm 0:9b334a45a8ff 108 status = i2c_status(obj);
bogdanm 0:9b334a45a8ff 109
bogdanm 0:9b334a45a8ff 110 // Clear start bit now transmitted, and interrupt bit
bogdanm 0:9b334a45a8ff 111 i2c_conclr(obj, 1, 0, 0, 0);
bogdanm 0:9b334a45a8ff 112 return status;
bogdanm 0:9b334a45a8ff 113 }
bogdanm 0:9b334a45a8ff 114
bogdanm 0:9b334a45a8ff 115 inline int i2c_stop(i2c_t *obj) {
bogdanm 0:9b334a45a8ff 116 int timeout = 0;
bogdanm 0:9b334a45a8ff 117
bogdanm 0:9b334a45a8ff 118 // write the stop bit
bogdanm 0:9b334a45a8ff 119 i2c_conset(obj, 0, 1, 0, 0);
bogdanm 0:9b334a45a8ff 120 i2c_clear_SI(obj);
bogdanm 0:9b334a45a8ff 121
bogdanm 0:9b334a45a8ff 122 // wait for STO bit to reset
bogdanm 0:9b334a45a8ff 123 while(I2C_CONSET(obj) & (1 << 4)) {
bogdanm 0:9b334a45a8ff 124 timeout ++;
bogdanm 0:9b334a45a8ff 125 if (timeout > 100000) return 1;
bogdanm 0:9b334a45a8ff 126 }
bogdanm 0:9b334a45a8ff 127
bogdanm 0:9b334a45a8ff 128 return 0;
bogdanm 0:9b334a45a8ff 129 }
bogdanm 0:9b334a45a8ff 130
bogdanm 0:9b334a45a8ff 131
bogdanm 0:9b334a45a8ff 132 static inline int i2c_do_write(i2c_t *obj, int value, uint8_t addr) {
bogdanm 0:9b334a45a8ff 133 // write the data
bogdanm 0:9b334a45a8ff 134 I2C_DAT(obj) = value;
bogdanm 0:9b334a45a8ff 135
bogdanm 0:9b334a45a8ff 136 // clear SI to init a send
bogdanm 0:9b334a45a8ff 137 i2c_clear_SI(obj);
bogdanm 0:9b334a45a8ff 138
bogdanm 0:9b334a45a8ff 139 // wait and return status
bogdanm 0:9b334a45a8ff 140 i2c_wait_SI(obj);
bogdanm 0:9b334a45a8ff 141 return i2c_status(obj);
bogdanm 0:9b334a45a8ff 142 }
bogdanm 0:9b334a45a8ff 143
bogdanm 0:9b334a45a8ff 144 static inline int i2c_do_read(i2c_t *obj, int last) {
bogdanm 0:9b334a45a8ff 145 // we are in state 0x40 (SLA+R tx'd) or 0x50 (data rx'd and ack)
bogdanm 0:9b334a45a8ff 146 if (last) {
bogdanm 0:9b334a45a8ff 147 i2c_conclr(obj, 0, 0, 0, 1); // send a NOT ACK
bogdanm 0:9b334a45a8ff 148 } else {
bogdanm 0:9b334a45a8ff 149 i2c_conset(obj, 0, 0, 0, 1); // send a ACK
bogdanm 0:9b334a45a8ff 150 }
bogdanm 0:9b334a45a8ff 151
bogdanm 0:9b334a45a8ff 152 // accept byte
bogdanm 0:9b334a45a8ff 153 i2c_clear_SI(obj);
bogdanm 0:9b334a45a8ff 154
bogdanm 0:9b334a45a8ff 155 // wait for it to arrive
bogdanm 0:9b334a45a8ff 156 i2c_wait_SI(obj);
bogdanm 0:9b334a45a8ff 157
bogdanm 0:9b334a45a8ff 158 // return the data
bogdanm 0:9b334a45a8ff 159 return (I2C_DAT(obj) & 0xFF);
bogdanm 0:9b334a45a8ff 160 }
bogdanm 0:9b334a45a8ff 161
bogdanm 0:9b334a45a8ff 162 void i2c_frequency(i2c_t *obj, int hz) {
bogdanm 0:9b334a45a8ff 163 // No peripheral clock divider on the M0
bogdanm 0:9b334a45a8ff 164 uint32_t PCLK = SystemCoreClock;
bogdanm 0:9b334a45a8ff 165
bogdanm 0:9b334a45a8ff 166 uint32_t pulse = PCLK / (hz * 2);
bogdanm 0:9b334a45a8ff 167
bogdanm 0:9b334a45a8ff 168 // I2C Rate
bogdanm 0:9b334a45a8ff 169 I2C_SCLL(obj, pulse);
bogdanm 0:9b334a45a8ff 170 I2C_SCLH(obj, pulse);
bogdanm 0:9b334a45a8ff 171 }
bogdanm 0:9b334a45a8ff 172
bogdanm 0:9b334a45a8ff 173 // The I2C does a read or a write as a whole operation
bogdanm 0:9b334a45a8ff 174 // There are two types of error conditions it can encounter
bogdanm 0:9b334a45a8ff 175 // 1) it can not obtain the bus
bogdanm 0:9b334a45a8ff 176 // 2) it gets error responses at part of the transmission
bogdanm 0:9b334a45a8ff 177 //
bogdanm 0:9b334a45a8ff 178 // We tackle them as follows:
bogdanm 0:9b334a45a8ff 179 // 1) we retry until we get the bus. we could have a "timeout" if we can not get it
bogdanm 0:9b334a45a8ff 180 // which basically turns it in to a 2)
bogdanm 0:9b334a45a8ff 181 // 2) on error, we use the standard error mechanisms to report/debug
bogdanm 0:9b334a45a8ff 182 //
bogdanm 0:9b334a45a8ff 183 // Therefore an I2C transaction should always complete. If it doesn't it is usually
bogdanm 0:9b334a45a8ff 184 // because something is setup wrong (e.g. wiring), and we don't need to programatically
bogdanm 0:9b334a45a8ff 185 // check for that
bogdanm 0:9b334a45a8ff 186
bogdanm 0:9b334a45a8ff 187 int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) {
bogdanm 0:9b334a45a8ff 188 int count, status;
bogdanm 0:9b334a45a8ff 189
bogdanm 0:9b334a45a8ff 190 status = i2c_start(obj);
bogdanm 0:9b334a45a8ff 191
bogdanm 0:9b334a45a8ff 192 if ((status != 0x10) && (status != 0x08)) {
bogdanm 0:9b334a45a8ff 193 i2c_stop(obj);
bogdanm 0:9b334a45a8ff 194 return I2C_ERROR_BUS_BUSY;
bogdanm 0:9b334a45a8ff 195 }
bogdanm 0:9b334a45a8ff 196
bogdanm 0:9b334a45a8ff 197 status = i2c_do_write(obj, (address | 0x01), 1);
bogdanm 0:9b334a45a8ff 198 if (status != 0x40) {
bogdanm 0:9b334a45a8ff 199 i2c_stop(obj);
bogdanm 0:9b334a45a8ff 200 return I2C_ERROR_NO_SLAVE;
bogdanm 0:9b334a45a8ff 201 }
bogdanm 0:9b334a45a8ff 202
bogdanm 0:9b334a45a8ff 203 // Read in all except last byte
bogdanm 0:9b334a45a8ff 204 for (count = 0; count < (length - 1); count++) {
bogdanm 0:9b334a45a8ff 205 int value = i2c_do_read(obj, 0);
bogdanm 0:9b334a45a8ff 206 status = i2c_status(obj);
bogdanm 0:9b334a45a8ff 207 if (status != 0x50) {
bogdanm 0:9b334a45a8ff 208 i2c_stop(obj);
bogdanm 0:9b334a45a8ff 209 return count;
bogdanm 0:9b334a45a8ff 210 }
bogdanm 0:9b334a45a8ff 211 data[count] = (char) value;
bogdanm 0:9b334a45a8ff 212 }
bogdanm 0:9b334a45a8ff 213
bogdanm 0:9b334a45a8ff 214 // read in last byte
bogdanm 0:9b334a45a8ff 215 int value = i2c_do_read(obj, 1);
bogdanm 0:9b334a45a8ff 216 status = i2c_status(obj);
bogdanm 0:9b334a45a8ff 217 if (status != 0x58) {
bogdanm 0:9b334a45a8ff 218 i2c_stop(obj);
bogdanm 0:9b334a45a8ff 219 return length - 1;
bogdanm 0:9b334a45a8ff 220 }
bogdanm 0:9b334a45a8ff 221
bogdanm 0:9b334a45a8ff 222 data[count] = (char) value;
bogdanm 0:9b334a45a8ff 223
bogdanm 0:9b334a45a8ff 224 // If not repeated start, send stop.
bogdanm 0:9b334a45a8ff 225 if (stop) {
bogdanm 0:9b334a45a8ff 226 i2c_stop(obj);
bogdanm 0:9b334a45a8ff 227 }
bogdanm 0:9b334a45a8ff 228
bogdanm 0:9b334a45a8ff 229 return length;
bogdanm 0:9b334a45a8ff 230 }
bogdanm 0:9b334a45a8ff 231
bogdanm 0:9b334a45a8ff 232 int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) {
bogdanm 0:9b334a45a8ff 233 int i, status;
bogdanm 0:9b334a45a8ff 234
bogdanm 0:9b334a45a8ff 235 status = i2c_start(obj);
bogdanm 0:9b334a45a8ff 236
bogdanm 0:9b334a45a8ff 237 if ((status != 0x10) && (status != 0x08)) {
bogdanm 0:9b334a45a8ff 238 i2c_stop(obj);
bogdanm 0:9b334a45a8ff 239 return I2C_ERROR_BUS_BUSY;
bogdanm 0:9b334a45a8ff 240 }
bogdanm 0:9b334a45a8ff 241
bogdanm 0:9b334a45a8ff 242 status = i2c_do_write(obj, (address & 0xFE), 1);
bogdanm 0:9b334a45a8ff 243 if (status != 0x18) {
bogdanm 0:9b334a45a8ff 244 i2c_stop(obj);
bogdanm 0:9b334a45a8ff 245 return I2C_ERROR_NO_SLAVE;
bogdanm 0:9b334a45a8ff 246 }
bogdanm 0:9b334a45a8ff 247
bogdanm 0:9b334a45a8ff 248 for (i=0; i<length; i++) {
bogdanm 0:9b334a45a8ff 249 status = i2c_do_write(obj, data[i], 0);
bogdanm 0:9b334a45a8ff 250 if(status != 0x28) {
bogdanm 0:9b334a45a8ff 251 i2c_stop(obj);
bogdanm 0:9b334a45a8ff 252 return i;
bogdanm 0:9b334a45a8ff 253 }
bogdanm 0:9b334a45a8ff 254 }
bogdanm 0:9b334a45a8ff 255
bogdanm 0:9b334a45a8ff 256 // clearing the serial interrupt here might cause an unintended rewrite of the last byte
bogdanm 0:9b334a45a8ff 257 // see also issue report https://mbed.org/users/mbed_official/code/mbed/issues/1
bogdanm 0:9b334a45a8ff 258 // i2c_clear_SI(obj);
bogdanm 0:9b334a45a8ff 259
bogdanm 0:9b334a45a8ff 260 // If not repeated start, send stop.
bogdanm 0:9b334a45a8ff 261 if (stop) {
bogdanm 0:9b334a45a8ff 262 i2c_stop(obj);
bogdanm 0:9b334a45a8ff 263 }
bogdanm 0:9b334a45a8ff 264
bogdanm 0:9b334a45a8ff 265 return length;
bogdanm 0:9b334a45a8ff 266 }
bogdanm 0:9b334a45a8ff 267
bogdanm 0:9b334a45a8ff 268 void i2c_reset(i2c_t *obj) {
bogdanm 0:9b334a45a8ff 269 i2c_stop(obj);
bogdanm 0:9b334a45a8ff 270 }
bogdanm 0:9b334a45a8ff 271
bogdanm 0:9b334a45a8ff 272 int i2c_byte_read(i2c_t *obj, int last) {
bogdanm 0:9b334a45a8ff 273 return (i2c_do_read(obj, last) & 0xFF);
bogdanm 0:9b334a45a8ff 274 }
bogdanm 0:9b334a45a8ff 275
bogdanm 0:9b334a45a8ff 276 int i2c_byte_write(i2c_t *obj, int data) {
bogdanm 0:9b334a45a8ff 277 int ack;
bogdanm 0:9b334a45a8ff 278 int status = i2c_do_write(obj, (data & 0xFF), 0);
bogdanm 0:9b334a45a8ff 279
bogdanm 0:9b334a45a8ff 280 switch(status) {
bogdanm 0:9b334a45a8ff 281 case 0x18: case 0x28: // Master transmit ACKs
bogdanm 0:9b334a45a8ff 282 ack = 1;
bogdanm 0:9b334a45a8ff 283 break;
bogdanm 0:9b334a45a8ff 284 case 0x40: // Master receive address transmitted ACK
bogdanm 0:9b334a45a8ff 285 ack = 1;
bogdanm 0:9b334a45a8ff 286 break;
bogdanm 0:9b334a45a8ff 287 case 0xB8: // Slave transmit ACK
bogdanm 0:9b334a45a8ff 288 ack = 1;
bogdanm 0:9b334a45a8ff 289 break;
bogdanm 0:9b334a45a8ff 290 default:
bogdanm 0:9b334a45a8ff 291 ack = 0;
bogdanm 0:9b334a45a8ff 292 break;
bogdanm 0:9b334a45a8ff 293 }
bogdanm 0:9b334a45a8ff 294
bogdanm 0:9b334a45a8ff 295 return ack;
bogdanm 0:9b334a45a8ff 296 }
bogdanm 0:9b334a45a8ff 297
bogdanm 0:9b334a45a8ff 298 void i2c_slave_mode(i2c_t *obj, int enable_slave) {
bogdanm 0:9b334a45a8ff 299 if (enable_slave != 0) {
bogdanm 0:9b334a45a8ff 300 i2c_conclr(obj, 1, 1, 1, 0);
bogdanm 0:9b334a45a8ff 301 i2c_conset(obj, 0, 0, 0, 1);
bogdanm 0:9b334a45a8ff 302 } else {
bogdanm 0:9b334a45a8ff 303 i2c_conclr(obj, 1, 1, 1, 1);
bogdanm 0:9b334a45a8ff 304 }
bogdanm 0:9b334a45a8ff 305 }
bogdanm 0:9b334a45a8ff 306
bogdanm 0:9b334a45a8ff 307 int i2c_slave_receive(i2c_t *obj) {
bogdanm 0:9b334a45a8ff 308 int status;
bogdanm 0:9b334a45a8ff 309 int retval;
bogdanm 0:9b334a45a8ff 310
bogdanm 0:9b334a45a8ff 311 status = i2c_status(obj);
bogdanm 0:9b334a45a8ff 312 switch(status) {
bogdanm 0:9b334a45a8ff 313 case 0x60: retval = 3; break;
bogdanm 0:9b334a45a8ff 314 case 0x70: retval = 2; break;
bogdanm 0:9b334a45a8ff 315 case 0xA8: retval = 1; break;
bogdanm 0:9b334a45a8ff 316 default : retval = 0; break;
bogdanm 0:9b334a45a8ff 317 }
bogdanm 0:9b334a45a8ff 318
bogdanm 0:9b334a45a8ff 319 return(retval);
bogdanm 0:9b334a45a8ff 320 }
bogdanm 0:9b334a45a8ff 321
bogdanm 0:9b334a45a8ff 322 int i2c_slave_read(i2c_t *obj, char *data, int length) {
bogdanm 0:9b334a45a8ff 323 int count = 0;
bogdanm 0:9b334a45a8ff 324 int status;
bogdanm 0:9b334a45a8ff 325
bogdanm 0:9b334a45a8ff 326 do {
bogdanm 0:9b334a45a8ff 327 i2c_clear_SI(obj);
bogdanm 0:9b334a45a8ff 328 i2c_wait_SI(obj);
bogdanm 0:9b334a45a8ff 329 status = i2c_status(obj);
bogdanm 0:9b334a45a8ff 330 if((status == 0x80) || (status == 0x90)) {
bogdanm 0:9b334a45a8ff 331 data[count] = I2C_DAT(obj) & 0xFF;
bogdanm 0:9b334a45a8ff 332 }
bogdanm 0:9b334a45a8ff 333 count++;
bogdanm 0:9b334a45a8ff 334 } while (((status == 0x80) || (status == 0x90) ||
bogdanm 0:9b334a45a8ff 335 (status == 0x060) || (status == 0x70)) && (count < length));
bogdanm 0:9b334a45a8ff 336
bogdanm 0:9b334a45a8ff 337 if(status != 0xA0) {
bogdanm 0:9b334a45a8ff 338 i2c_stop(obj);
bogdanm 0:9b334a45a8ff 339 }
bogdanm 0:9b334a45a8ff 340
bogdanm 0:9b334a45a8ff 341 i2c_clear_SI(obj);
bogdanm 0:9b334a45a8ff 342
bogdanm 0:9b334a45a8ff 343 return count;
bogdanm 0:9b334a45a8ff 344 }
bogdanm 0:9b334a45a8ff 345
bogdanm 0:9b334a45a8ff 346 int i2c_slave_write(i2c_t *obj, const char *data, int length) {
bogdanm 0:9b334a45a8ff 347 int count = 0;
bogdanm 0:9b334a45a8ff 348 int status;
bogdanm 0:9b334a45a8ff 349
bogdanm 0:9b334a45a8ff 350 if(length <= 0) {
bogdanm 0:9b334a45a8ff 351 return(0);
bogdanm 0:9b334a45a8ff 352 }
bogdanm 0:9b334a45a8ff 353
bogdanm 0:9b334a45a8ff 354 do {
bogdanm 0:9b334a45a8ff 355 status = i2c_do_write(obj, data[count], 0);
bogdanm 0:9b334a45a8ff 356 count++;
bogdanm 0:9b334a45a8ff 357 } while ((count < length) && (status == 0xB8));
bogdanm 0:9b334a45a8ff 358
bogdanm 0:9b334a45a8ff 359 if((status != 0xC0) && (status != 0xC8)) {
bogdanm 0:9b334a45a8ff 360 i2c_stop(obj);
bogdanm 0:9b334a45a8ff 361 }
bogdanm 0:9b334a45a8ff 362
bogdanm 0:9b334a45a8ff 363 i2c_clear_SI(obj);
bogdanm 0:9b334a45a8ff 364
bogdanm 0:9b334a45a8ff 365 return(count);
bogdanm 0:9b334a45a8ff 366 }
bogdanm 0:9b334a45a8ff 367
bogdanm 0:9b334a45a8ff 368 void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask) {
bogdanm 0:9b334a45a8ff 369 uint32_t addr;
bogdanm 0:9b334a45a8ff 370
bogdanm 0:9b334a45a8ff 371 if ((idx >= 0) && (idx <= 3)) {
bogdanm 0:9b334a45a8ff 372 addr = ((uint32_t)obj->i2c) + I2C_addr_offset[0][idx];
bogdanm 0:9b334a45a8ff 373 *((uint32_t *) addr) = address & 0xFF;
bogdanm 0:9b334a45a8ff 374 }
bogdanm 0:9b334a45a8ff 375 }