mbed official / mbed-dev

mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_pwr_ex.c@156:95d6b41a828b, 2017-01-16 (annotated)

Committer:
<>
Date:
Mon Jan 16 15:03:32 2017 +0000
Revision:
156:95d6b41a828b
Parent:
149:156823d33999
Child:
180:96ed750bd169
This updates the lib to the mbed lib v134

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 144:ef7eb2e8f9f7 1 /**
<> 144:ef7eb2e8f9f7 2 ******************************************************************************
<> 144:ef7eb2e8f9f7 3 * @file stm32f0xx_hal_pwr_ex.c
<> 144:ef7eb2e8f9f7 4 * @author MCD Application Team
<> 156:95d6b41a828b 5 * @version V1.5.0
<> 156:95d6b41a828b 6 * @date 04-November-2016
<> 144:ef7eb2e8f9f7 7 * @brief Extended PWR HAL module driver.
<> 144:ef7eb2e8f9f7 8 * This file provides firmware functions to manage the following
<> 144:ef7eb2e8f9f7 9 * functionalities of the Power Controller (PWR) peripheral:
<> 144:ef7eb2e8f9f7 10 * + Extended Initialization and de-initialization functions
<> 144:ef7eb2e8f9f7 11 * + Extended Peripheral Control functions
<> 144:ef7eb2e8f9f7 12 *
<> 144:ef7eb2e8f9f7 13 ******************************************************************************
<> 144:ef7eb2e8f9f7 14 * @attention
<> 144:ef7eb2e8f9f7 15 *
<> 144:ef7eb2e8f9f7 16 * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
<> 144:ef7eb2e8f9f7 17 *
<> 144:ef7eb2e8f9f7 18 * Redistribution and use in source and binary forms, with or without modification,
<> 144:ef7eb2e8f9f7 19 * are permitted provided that the following conditions are met:
<> 144:ef7eb2e8f9f7 20 * 1. Redistributions of source code must retain the above copyright notice,
<> 144:ef7eb2e8f9f7 21 * this list of conditions and the following disclaimer.
<> 144:ef7eb2e8f9f7 22 * 2. Redistributions in binary form must reproduce the above copyright notice,
<> 144:ef7eb2e8f9f7 23 * this list of conditions and the following disclaimer in the documentation
<> 144:ef7eb2e8f9f7 24 * and/or other materials provided with the distribution.
<> 144:ef7eb2e8f9f7 25 * 3. Neither the name of STMicroelectronics nor the names of its contributors
<> 144:ef7eb2e8f9f7 26 * may be used to endorse or promote products derived from this software
<> 144:ef7eb2e8f9f7 27 * without specific prior written permission.
<> 144:ef7eb2e8f9f7 28 *
<> 144:ef7eb2e8f9f7 29 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
<> 144:ef7eb2e8f9f7 30 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
<> 144:ef7eb2e8f9f7 31 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
<> 144:ef7eb2e8f9f7 32 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
<> 144:ef7eb2e8f9f7 33 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
<> 144:ef7eb2e8f9f7 34 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
<> 144:ef7eb2e8f9f7 35 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
<> 144:ef7eb2e8f9f7 36 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
<> 144:ef7eb2e8f9f7 37 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
<> 144:ef7eb2e8f9f7 38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
<> 144:ef7eb2e8f9f7 39 *
<> 144:ef7eb2e8f9f7 40 ******************************************************************************
<> 144:ef7eb2e8f9f7 41 */
<> 144:ef7eb2e8f9f7 42
<> 144:ef7eb2e8f9f7 43 /* Includes ------------------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 44 #include "stm32f0xx_hal.h"
<> 144:ef7eb2e8f9f7 45
<> 144:ef7eb2e8f9f7 46 /** @addtogroup STM32F0xx_HAL_Driver
<> 144:ef7eb2e8f9f7 47 * @{
<> 144:ef7eb2e8f9f7 48 */
<> 144:ef7eb2e8f9f7 49
<> 144:ef7eb2e8f9f7 50 /** @defgroup PWREx PWREx
<> 144:ef7eb2e8f9f7 51 * @brief PWREx HAL module driver
<> 144:ef7eb2e8f9f7 52 * @{
<> 144:ef7eb2e8f9f7 53 */
<> 144:ef7eb2e8f9f7 54
<> 144:ef7eb2e8f9f7 55 #ifdef HAL_PWR_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 56
<> 144:ef7eb2e8f9f7 57 /* Private typedef -----------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 58 /* Private define ------------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 59 /** @defgroup PWREx_Private_Constants PWREx Private Constants
<> 144:ef7eb2e8f9f7 60 * @{
<> 144:ef7eb2e8f9f7 61 */
<> 156:95d6b41a828b 62 #define PVD_MODE_IT (0x00010000U)
<> 156:95d6b41a828b 63 #define PVD_MODE_EVT (0x00020000U)
<> 156:95d6b41a828b 64 #define PVD_RISING_EDGE (0x00000001U)
<> 156:95d6b41a828b 65 #define PVD_FALLING_EDGE (0x00000002U)
<> 144:ef7eb2e8f9f7 66 /**
<> 144:ef7eb2e8f9f7 67 * @}
<> 144:ef7eb2e8f9f7 68 */
<> 144:ef7eb2e8f9f7 69
<> 144:ef7eb2e8f9f7 70 /* Private macro -------------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 71 /* Private variables ---------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 72 /* Private function prototypes -----------------------------------------------*/
<> 144:ef7eb2e8f9f7 73 /* Exported functions ---------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 74
<> 144:ef7eb2e8f9f7 75 /** @defgroup PWREx_Exported_Functions PWREx Exported Functions
<> 144:ef7eb2e8f9f7 76 * @{
<> 144:ef7eb2e8f9f7 77 */
<> 144:ef7eb2e8f9f7 78
<> 144:ef7eb2e8f9f7 79 /** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended Control Functions
<> 144:ef7eb2e8f9f7 80 * @brief Extended Peripheral Control functions
<> 144:ef7eb2e8f9f7 81 *
<> 144:ef7eb2e8f9f7 82 @verbatim
<> 144:ef7eb2e8f9f7 83
<> 144:ef7eb2e8f9f7 84 ===============================================================================
<> 144:ef7eb2e8f9f7 85 ##### Peripheral extended control functions #####
<> 144:ef7eb2e8f9f7 86 ===============================================================================
<> 144:ef7eb2e8f9f7 87
<> 144:ef7eb2e8f9f7 88 *** PVD configuration ***
<> 144:ef7eb2e8f9f7 89 =========================
<> 144:ef7eb2e8f9f7 90 [..]
<> 144:ef7eb2e8f9f7 91 (+) The PVD is used to monitor the VDD power supply by comparing it to a
<> 144:ef7eb2e8f9f7 92 threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
<> 144:ef7eb2e8f9f7 93 (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
<> 144:ef7eb2e8f9f7 94 than the PVD threshold. This event is internally connected to the EXTI
<> 144:ef7eb2e8f9f7 95 line16 and can generate an interrupt if enabled. This is done through
<> 144:ef7eb2e8f9f7 96 HAL_PWR_ConfigPVD(), HAL_PWR_EnablePVD() functions.
<> 144:ef7eb2e8f9f7 97 (+) The PVD is stopped in Standby mode.
<> 144:ef7eb2e8f9f7 98 -@- PVD is not available on STM32F030x4/x6/x8
<> 144:ef7eb2e8f9f7 99
<> 144:ef7eb2e8f9f7 100 *** VDDIO2 Monitor Configuration ***
<> 144:ef7eb2e8f9f7 101 ====================================
<> 144:ef7eb2e8f9f7 102 [..]
<> 144:ef7eb2e8f9f7 103 (+) VDDIO2 monitor is used to monitor the VDDIO2 power supply by comparing it
<> 144:ef7eb2e8f9f7 104 to VREFInt Voltage
<> 144:ef7eb2e8f9f7 105 (+) This monitor is internally connected to the EXTI line31
<> 144:ef7eb2e8f9f7 106 and can generate an interrupt if enabled. This is done through
<> 144:ef7eb2e8f9f7 107 HAL_PWREx_EnableVddio2Monitor() function.
<> 144:ef7eb2e8f9f7 108 -@- VDDIO2 is available on STM32F07x/09x/04x
<> 144:ef7eb2e8f9f7 109
<> 144:ef7eb2e8f9f7 110 @endverbatim
<> 144:ef7eb2e8f9f7 111 * @{
<> 144:ef7eb2e8f9f7 112 */
<> 144:ef7eb2e8f9f7 113
<> 144:ef7eb2e8f9f7 114 #if defined (STM32F031x6) || defined (STM32F051x8) || \
<> 144:ef7eb2e8f9f7 115 defined (STM32F071xB) || defined (STM32F091xC) || \
<> 144:ef7eb2e8f9f7 116 defined (STM32F042x6) || defined (STM32F072xB)
<> 144:ef7eb2e8f9f7 117 /**
<> 144:ef7eb2e8f9f7 118 * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
<> 144:ef7eb2e8f9f7 119 * @param sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration
<> 144:ef7eb2e8f9f7 120 * information for the PVD.
<> 144:ef7eb2e8f9f7 121 * @note Refer to the electrical characteristics of your device datasheet for
<> 144:ef7eb2e8f9f7 122 * more details about the voltage threshold corresponding to each
<> 144:ef7eb2e8f9f7 123 * detection level.
<> 144:ef7eb2e8f9f7 124 * @retval None
<> 144:ef7eb2e8f9f7 125 */
<> 144:ef7eb2e8f9f7 126 void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
<> 144:ef7eb2e8f9f7 127 {
<> 144:ef7eb2e8f9f7 128 /* Check the parameters */
<> 144:ef7eb2e8f9f7 129 assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
<> 144:ef7eb2e8f9f7 130 assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
<> 144:ef7eb2e8f9f7 131
<> 144:ef7eb2e8f9f7 132 /* Set PLS[7:5] bits according to PVDLevel value */
<> 144:ef7eb2e8f9f7 133 MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
<> 144:ef7eb2e8f9f7 134
<> 144:ef7eb2e8f9f7 135 /* Clear any previous config. Keep it clear if no event or IT mode is selected */
<> 144:ef7eb2e8f9f7 136 __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
<> 144:ef7eb2e8f9f7 137 __HAL_PWR_PVD_EXTI_DISABLE_IT();
<> 144:ef7eb2e8f9f7 138 __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
<> 144:ef7eb2e8f9f7 139
<> 144:ef7eb2e8f9f7 140 /* Configure interrupt mode */
<> 144:ef7eb2e8f9f7 141 if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
<> 144:ef7eb2e8f9f7 142 {
<> 144:ef7eb2e8f9f7 143 __HAL_PWR_PVD_EXTI_ENABLE_IT();
<> 144:ef7eb2e8f9f7 144 }
<> 144:ef7eb2e8f9f7 145
<> 144:ef7eb2e8f9f7 146 /* Configure event mode */
<> 144:ef7eb2e8f9f7 147 if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
<> 144:ef7eb2e8f9f7 148 {
<> 144:ef7eb2e8f9f7 149 __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
<> 144:ef7eb2e8f9f7 150 }
<> 144:ef7eb2e8f9f7 151
<> 144:ef7eb2e8f9f7 152 /* Configure the edge */
<> 144:ef7eb2e8f9f7 153 if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
<> 144:ef7eb2e8f9f7 154 {
<> 144:ef7eb2e8f9f7 155 __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
<> 144:ef7eb2e8f9f7 156 }
<> 144:ef7eb2e8f9f7 157
<> 144:ef7eb2e8f9f7 158 if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
<> 144:ef7eb2e8f9f7 159 {
<> 144:ef7eb2e8f9f7 160 __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
<> 144:ef7eb2e8f9f7 161 }
<> 144:ef7eb2e8f9f7 162 }
<> 144:ef7eb2e8f9f7 163
<> 144:ef7eb2e8f9f7 164 /**
<> 144:ef7eb2e8f9f7 165 * @brief Enables the Power Voltage Detector(PVD).
<> 144:ef7eb2e8f9f7 166 * @retval None
<> 144:ef7eb2e8f9f7 167 */
<> 144:ef7eb2e8f9f7 168 void HAL_PWR_EnablePVD(void)
<> 144:ef7eb2e8f9f7 169 {
<> 144:ef7eb2e8f9f7 170 PWR->CR |= (uint32_t)PWR_CR_PVDE;
<> 144:ef7eb2e8f9f7 171 }
<> 144:ef7eb2e8f9f7 172
<> 144:ef7eb2e8f9f7 173 /**
<> 144:ef7eb2e8f9f7 174 * @brief Disables the Power Voltage Detector(PVD).
<> 144:ef7eb2e8f9f7 175 * @retval None
<> 144:ef7eb2e8f9f7 176 */
<> 144:ef7eb2e8f9f7 177 void HAL_PWR_DisablePVD(void)
<> 144:ef7eb2e8f9f7 178 {
<> 144:ef7eb2e8f9f7 179 PWR->CR &= ~((uint32_t)PWR_CR_PVDE);
<> 144:ef7eb2e8f9f7 180 }
<> 144:ef7eb2e8f9f7 181
<> 144:ef7eb2e8f9f7 182 /**
<> 144:ef7eb2e8f9f7 183 * @brief This function handles the PWR PVD interrupt request.
<> 144:ef7eb2e8f9f7 184 * @note This API should be called under the PVD_IRQHandler() or PVD_VDDIO2_IRQHandler().
<> 144:ef7eb2e8f9f7 185 * @retval None
<> 144:ef7eb2e8f9f7 186 */
<> 144:ef7eb2e8f9f7 187 void HAL_PWR_PVD_IRQHandler(void)
<> 144:ef7eb2e8f9f7 188 {
<> 144:ef7eb2e8f9f7 189 /* Check PWR exti flag */
<> 144:ef7eb2e8f9f7 190 if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
<> 144:ef7eb2e8f9f7 191 {
<> 144:ef7eb2e8f9f7 192 /* PWR PVD interrupt user callback */
<> 144:ef7eb2e8f9f7 193 HAL_PWR_PVDCallback();
<> 144:ef7eb2e8f9f7 194
<> 144:ef7eb2e8f9f7 195 /* Clear PWR Exti pending bit */
<> 144:ef7eb2e8f9f7 196 __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
<> 144:ef7eb2e8f9f7 197 }
<> 144:ef7eb2e8f9f7 198 }
<> 144:ef7eb2e8f9f7 199
<> 144:ef7eb2e8f9f7 200 /**
<> 144:ef7eb2e8f9f7 201 * @brief PWR PVD interrupt callback
<> 144:ef7eb2e8f9f7 202 * @retval None
<> 144:ef7eb2e8f9f7 203 */
<> 144:ef7eb2e8f9f7 204 __weak void HAL_PWR_PVDCallback(void)
<> 144:ef7eb2e8f9f7 205 {
<> 144:ef7eb2e8f9f7 206 /* NOTE : This function Should not be modified, when the callback is needed,
<> 144:ef7eb2e8f9f7 207 the HAL_PWR_PVDCallback could be implemented in the user file
<> 144:ef7eb2e8f9f7 208 */
<> 144:ef7eb2e8f9f7 209 }
<> 144:ef7eb2e8f9f7 210
<> 144:ef7eb2e8f9f7 211 #endif /* defined (STM32F031x6) || defined (STM32F051x8) || */
<> 144:ef7eb2e8f9f7 212 /* defined (STM32F071xB) || defined (STM32F091xC) || */
<> 144:ef7eb2e8f9f7 213 /* defined (STM32F042x6) || defined (STM32F072xB) */
<> 144:ef7eb2e8f9f7 214
<> 144:ef7eb2e8f9f7 215 #if defined (STM32F042x6) || defined (STM32F048xx) || \
<> 144:ef7eb2e8f9f7 216 defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
<> 144:ef7eb2e8f9f7 217 defined (STM32F091xC) || defined (STM32F098xx)
<> 144:ef7eb2e8f9f7 218 /**
<> 144:ef7eb2e8f9f7 219 * @brief Enable VDDIO2 monitor: enable Exti 31 and falling edge detection.
<> 144:ef7eb2e8f9f7 220 * @note If Exti 31 is enable correlty and VDDIO2 voltage goes below Vrefint,
<> 144:ef7eb2e8f9f7 221 an interrupt is generated Irq line 1.
<> 144:ef7eb2e8f9f7 222 NVIS has to be enable by user.
<> 144:ef7eb2e8f9f7 223 * @retval None
<> 144:ef7eb2e8f9f7 224 */
<> 144:ef7eb2e8f9f7 225 void HAL_PWREx_EnableVddio2Monitor(void)
<> 144:ef7eb2e8f9f7 226 {
<> 144:ef7eb2e8f9f7 227 __HAL_PWR_VDDIO2_EXTI_ENABLE_IT();
<> 144:ef7eb2e8f9f7 228 __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE();
<> 144:ef7eb2e8f9f7 229 }
<> 144:ef7eb2e8f9f7 230
<> 144:ef7eb2e8f9f7 231 /**
<> 144:ef7eb2e8f9f7 232 * @brief Disable the Vddio2 Monitor.
<> 144:ef7eb2e8f9f7 233 * @retval None
<> 144:ef7eb2e8f9f7 234 */
<> 144:ef7eb2e8f9f7 235 void HAL_PWREx_DisableVddio2Monitor(void)
<> 144:ef7eb2e8f9f7 236 {
<> 144:ef7eb2e8f9f7 237 __HAL_PWR_VDDIO2_EXTI_DISABLE_IT();
<> 144:ef7eb2e8f9f7 238 __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE();
<> 144:ef7eb2e8f9f7 239
<> 144:ef7eb2e8f9f7 240 }
<> 144:ef7eb2e8f9f7 241
<> 144:ef7eb2e8f9f7 242 /**
<> 144:ef7eb2e8f9f7 243 * @brief This function handles the PWR Vddio2 monitor interrupt request.
<> 144:ef7eb2e8f9f7 244 * @note This API should be called under the VDDIO2_IRQHandler() PVD_VDDIO2_IRQHandler().
<> 144:ef7eb2e8f9f7 245 * @retval None
<> 144:ef7eb2e8f9f7 246 */
<> 144:ef7eb2e8f9f7 247 void HAL_PWREx_Vddio2Monitor_IRQHandler(void)
<> 144:ef7eb2e8f9f7 248 {
<> 144:ef7eb2e8f9f7 249 /* Check PWR exti flag */
<> 144:ef7eb2e8f9f7 250 if(__HAL_PWR_VDDIO2_EXTI_GET_FLAG() != RESET)
<> 144:ef7eb2e8f9f7 251 {
<> 144:ef7eb2e8f9f7 252 /* PWR Vddio2 monitor interrupt user callback */
<> 144:ef7eb2e8f9f7 253 HAL_PWREx_Vddio2MonitorCallback();
<> 144:ef7eb2e8f9f7 254
<> 144:ef7eb2e8f9f7 255 /* Clear PWR Exti pending bit */
<> 144:ef7eb2e8f9f7 256 __HAL_PWR_VDDIO2_EXTI_CLEAR_FLAG();
<> 144:ef7eb2e8f9f7 257 }
<> 144:ef7eb2e8f9f7 258 }
<> 144:ef7eb2e8f9f7 259
<> 144:ef7eb2e8f9f7 260 /**
<> 144:ef7eb2e8f9f7 261 * @brief PWR Vddio2 Monitor interrupt callback
<> 144:ef7eb2e8f9f7 262 * @retval None
<> 144:ef7eb2e8f9f7 263 */
<> 144:ef7eb2e8f9f7 264 __weak void HAL_PWREx_Vddio2MonitorCallback(void)
<> 144:ef7eb2e8f9f7 265 {
<> 144:ef7eb2e8f9f7 266 /* NOTE : This function Should not be modified, when the callback is needed,
<> 144:ef7eb2e8f9f7 267 the HAL_PWREx_Vddio2MonitorCallback could be implemented in the user file
<> 144:ef7eb2e8f9f7 268 */
<> 144:ef7eb2e8f9f7 269 }
<> 144:ef7eb2e8f9f7 270
<> 144:ef7eb2e8f9f7 271 #endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
<> 144:ef7eb2e8f9f7 272 defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
<> 144:ef7eb2e8f9f7 273 defined (STM32F091xC) || defined (STM32F098xx) */
<> 144:ef7eb2e8f9f7 274
<> 144:ef7eb2e8f9f7 275 /**
<> 144:ef7eb2e8f9f7 276 * @}
<> 144:ef7eb2e8f9f7 277 */
<> 144:ef7eb2e8f9f7 278
<> 144:ef7eb2e8f9f7 279 /**
<> 144:ef7eb2e8f9f7 280 * @}
<> 144:ef7eb2e8f9f7 281 */
<> 144:ef7eb2e8f9f7 282
<> 144:ef7eb2e8f9f7 283 #endif /* HAL_PWR_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 284 /**
<> 144:ef7eb2e8f9f7 285 * @}
<> 144:ef7eb2e8f9f7 286 */
<> 144:ef7eb2e8f9f7 287
<> 144:ef7eb2e8f9f7 288 /**
<> 144:ef7eb2e8f9f7 289 * @}
<> 144:ef7eb2e8f9f7 290 */
<> 144:ef7eb2e8f9f7 291
<> 144:ef7eb2e8f9f7 292 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/