mbed official / mbed-dev

mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F410xB/TARGET_NUCLEO_F410RB/PeripheralPins.c@186:707f6e361f3e, 2018-06-22 (annotated)

Committer:
Anna Bridge
Date:
Fri Jun 22 16:45:37 2018 +0100
Revision:
186:707f6e361f3e
Parent:
181:57724642e740 
mbed-dev library. Release version 162

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 149:156823d33999 1 /* mbed Microcontroller Library
<> 149:156823d33999 2 *******************************************************************************
Anna Bridge 186:707f6e361f3e 3 * Copyright (c) 2018, STMicroelectronics
<> 149:156823d33999 4 * All rights reserved.
<> 149:156823d33999 5 *
<> 149:156823d33999 6 * Redistribution and use in source and binary forms, with or without
<> 149:156823d33999 7 * modification, are permitted provided that the following conditions are met:
<> 149:156823d33999 8 *
<> 149:156823d33999 9 * 1. Redistributions of source code must retain the above copyright notice,
<> 149:156823d33999 10 * this list of conditions and the following disclaimer.
<> 149:156823d33999 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
<> 149:156823d33999 12 * this list of conditions and the following disclaimer in the documentation
<> 149:156823d33999 13 * and/or other materials provided with the distribution.
<> 149:156823d33999 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
<> 149:156823d33999 15 * may be used to endorse or promote products derived from this software
<> 149:156823d33999 16 * without specific prior written permission.
<> 149:156823d33999 17 *
<> 149:156823d33999 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
<> 149:156823d33999 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
<> 149:156823d33999 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
<> 149:156823d33999 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
<> 149:156823d33999 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
<> 149:156823d33999 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
<> 149:156823d33999 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
<> 149:156823d33999 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
<> 149:156823d33999 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
<> 149:156823d33999 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
<> 149:156823d33999 28 *******************************************************************************
<> 149:156823d33999 29 */
<> 149:156823d33999 30
<> 149:156823d33999 31 #include "PeripheralPins.h"
AnnaBridge 181:57724642e740 32 #include "mbed_toolchain.h"
<> 149:156823d33999 33
Anna Bridge 186:707f6e361f3e 34 //==============================================================================
Anna Bridge 186:707f6e361f3e 35 // Notes
Anna Bridge 186:707f6e361f3e 36 //
Anna Bridge 186:707f6e361f3e 37 // - The pins mentioned Px_y_ALTz are alternative possibilities which use other
Anna Bridge 186:707f6e361f3e 38 // HW peripheral instances. You can use them the same way as any other "normal"
Anna Bridge 186:707f6e361f3e 39 // pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board
Anna Bridge 186:707f6e361f3e 40 // pinout image on mbed.org.
Anna Bridge 186:707f6e361f3e 41 //
Anna Bridge 186:707f6e361f3e 42 // - The pins which are connected to other components present on the board have
Anna Bridge 186:707f6e361f3e 43 // the comment "Connected to xxx". The pin function may not work properly in this
Anna Bridge 186:707f6e361f3e 44 // case. These pins may not be displayed on the board pinout image on mbed.org.
Anna Bridge 186:707f6e361f3e 45 // Please read the board reference manual and schematic for more information.
Anna Bridge 186:707f6e361f3e 46 //
Anna Bridge 186:707f6e361f3e 47 // - Warning: pins connected to the default STDIO_UART_TX and STDIO_UART_RX pins are commented
Anna Bridge 186:707f6e361f3e 48 // See https://os.mbed.com/teams/ST/wiki/STDIO for more information.
Anna Bridge 186:707f6e361f3e 49 //
Anna Bridge 186:707f6e361f3e 50 //==============================================================================
Anna Bridge 186:707f6e361f3e 51
<> 149:156823d33999 52
<> 149:156823d33999 53 //*** ADC ***
<> 149:156823d33999 54
AnnaBridge 181:57724642e740 55 MBED_WEAK const PinMap PinMap_ADC[] = {
Anna Bridge 186:707f6e361f3e 56 {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
Anna Bridge 186:707f6e361f3e 57 {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
Anna Bridge 186:707f6e361f3e 58 // {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 // Connected to STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 59 // {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 // Connected to STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 60 {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
Anna Bridge 186:707f6e361f3e 61 {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 // Connected to LD2 [Green Led]
Anna Bridge 186:707f6e361f3e 62 {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
Anna Bridge 186:707f6e361f3e 63 {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
Anna Bridge 186:707f6e361f3e 64 {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
Anna Bridge 186:707f6e361f3e 65 {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
Anna Bridge 186:707f6e361f3e 66 {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
Anna Bridge 186:707f6e361f3e 67 {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
Anna Bridge 186:707f6e361f3e 68 {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
Anna Bridge 186:707f6e361f3e 69 {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
Anna Bridge 186:707f6e361f3e 70 {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
Anna Bridge 186:707f6e361f3e 71 {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
Anna Bridge 186:707f6e361f3e 72 {NC, NC, 0}
Anna Bridge 163:74e0ce7f98e8 73 };
Anna Bridge 163:74e0ce7f98e8 74
AnnaBridge 181:57724642e740 75 MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
Anna Bridge 186:707f6e361f3e 76 {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)},
Anna Bridge 186:707f6e361f3e 77 {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)},
Anna Bridge 186:707f6e361f3e 78 {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)},
Anna Bridge 186:707f6e361f3e 79 {NC, NC, 0}
<> 149:156823d33999 80 };
<> 149:156823d33999 81
<> 149:156823d33999 82 //*** DAC ***
<> 149:156823d33999 83
AnnaBridge 181:57724642e740 84 MBED_WEAK const PinMap PinMap_DAC[] = {
Anna Bridge 186:707f6e361f3e 85 {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 // Connected to LD2 [Green Led]
Anna Bridge 186:707f6e361f3e 86 {NC, NC, 0}
<> 149:156823d33999 87 };
<> 149:156823d33999 88
<> 149:156823d33999 89 //*** I2C ***
<> 149:156823d33999 90
AnnaBridge 181:57724642e740 91 MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
Anna Bridge 186:707f6e361f3e 92 {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)}, // Connected to SWO
Anna Bridge 186:707f6e361f3e 93 {PB_3_ALT0, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)}, // Connected to SWO
Anna Bridge 186:707f6e361f3e 94 {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
Anna Bridge 186:707f6e361f3e 95 {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
Anna Bridge 186:707f6e361f3e 96 {PB_9_ALT0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
Anna Bridge 186:707f6e361f3e 97 {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
Anna Bridge 186:707f6e361f3e 98 {PB_14, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
Anna Bridge 186:707f6e361f3e 99 {PC_7, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
Anna Bridge 186:707f6e361f3e 100 {PC_9, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
Anna Bridge 186:707f6e361f3e 101 {NC, NC, 0}
<> 149:156823d33999 102 };
<> 149:156823d33999 103
AnnaBridge 181:57724642e740 104 MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
Anna Bridge 186:707f6e361f3e 105 {PA_8, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
Anna Bridge 186:707f6e361f3e 106 {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
Anna Bridge 186:707f6e361f3e 107 {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
Anna Bridge 186:707f6e361f3e 108 {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
Anna Bridge 186:707f6e361f3e 109 {PB_10_ALT0, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_FMPI2C1)},
Anna Bridge 186:707f6e361f3e 110 {PB_15, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
Anna Bridge 186:707f6e361f3e 111 {PC_6, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
Anna Bridge 186:707f6e361f3e 112 {NC, NC, 0}
<> 149:156823d33999 113 };
<> 149:156823d33999 114
<> 149:156823d33999 115 //*** PWM ***
<> 149:156823d33999 116
<> 149:156823d33999 117 // TIM5 cannot be used because already used by the us_ticker
AnnaBridge 181:57724642e740 118 MBED_WEAK const PinMap PinMap_PWM[] = {
Anna Bridge 186:707f6e361f3e 119 // {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
Anna Bridge 186:707f6e361f3e 120 // {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
Anna Bridge 186:707f6e361f3e 121 // {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 // Connected to STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 122 // {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 // Connected to STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 123 // {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 // Connected to STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 124 // {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 // Connected to STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 125 {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
Anna Bridge 186:707f6e361f3e 126 {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
Anna Bridge 186:707f6e361f3e 127 {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
Anna Bridge 186:707f6e361f3e 128 {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
Anna Bridge 186:707f6e361f3e 129 {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
Anna Bridge 186:707f6e361f3e 130 {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
Anna Bridge 186:707f6e361f3e 131 {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
Anna Bridge 186:707f6e361f3e 132 {PB_9, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
Anna Bridge 186:707f6e361f3e 133 // {PB_11, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
Anna Bridge 186:707f6e361f3e 134 // {PB_12, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
Anna Bridge 186:707f6e361f3e 135 {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
Anna Bridge 186:707f6e361f3e 136 {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
Anna Bridge 186:707f6e361f3e 137 {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
Anna Bridge 186:707f6e361f3e 138 {PC_4, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
Anna Bridge 186:707f6e361f3e 139 {PC_5, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
Anna Bridge 186:707f6e361f3e 140 // {PC_10, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
Anna Bridge 186:707f6e361f3e 141 // {PC_11, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
Anna Bridge 186:707f6e361f3e 142 {PC_12, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
Anna Bridge 186:707f6e361f3e 143 {NC, NC, 0}
<> 149:156823d33999 144 };
<> 149:156823d33999 145
<> 149:156823d33999 146 //*** SERIAL ***
<> 149:156823d33999 147
AnnaBridge 181:57724642e740 148 MBED_WEAK const PinMap PinMap_UART_TX[] = {
Anna Bridge 186:707f6e361f3e 149 {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_TX
Anna Bridge 186:707f6e361f3e 150 {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
Anna Bridge 186:707f6e361f3e 151 {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
Anna Bridge 186:707f6e361f3e 152 {PA_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
Anna Bridge 186:707f6e361f3e 153 {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
Anna Bridge 186:707f6e361f3e 154 {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
Anna Bridge 186:707f6e361f3e 155 {NC, NC, 0}
<> 149:156823d33999 156 };
<> 149:156823d33999 157
AnnaBridge 181:57724642e740 158 MBED_WEAK const PinMap PinMap_UART_RX[] = {
Anna Bridge 186:707f6e361f3e 159 {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_RX
Anna Bridge 186:707f6e361f3e 160 {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
Anna Bridge 186:707f6e361f3e 161 {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
Anna Bridge 186:707f6e361f3e 162 {PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to SWO
Anna Bridge 186:707f6e361f3e 163 {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
Anna Bridge 186:707f6e361f3e 164 {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
Anna Bridge 186:707f6e361f3e 165 {NC, NC, 0}
<> 149:156823d33999 166 };
<> 149:156823d33999 167
AnnaBridge 181:57724642e740 168 MBED_WEAK const PinMap PinMap_UART_RTS[] = {
Anna Bridge 186:707f6e361f3e 169 {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
Anna Bridge 186:707f6e361f3e 170 {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
Anna Bridge 186:707f6e361f3e 171 {NC, NC, 0}
<> 149:156823d33999 172 };
<> 149:156823d33999 173
AnnaBridge 181:57724642e740 174 MBED_WEAK const PinMap PinMap_UART_CTS[] = {
Anna Bridge 186:707f6e361f3e 175 {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
Anna Bridge 186:707f6e361f3e 176 {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
Anna Bridge 186:707f6e361f3e 177 {NC, NC, 0}
<> 149:156823d33999 178 };
Anna Bridge 186:707f6e361f3e 179
<> 149:156823d33999 180 //*** SPI ***
<> 149:156823d33999 181
AnnaBridge 181:57724642e740 182 MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
Anna Bridge 186:707f6e361f3e 183 {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
Anna Bridge 186:707f6e361f3e 184 {PA_10, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI5)},
Anna Bridge 186:707f6e361f3e 185 {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
Anna Bridge 186:707f6e361f3e 186 {PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI5)},
Anna Bridge 186:707f6e361f3e 187 {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 188 {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 189 {NC, NC, 0}
<> 149:156823d33999 190 };
<> 149:156823d33999 191
AnnaBridge 181:57724642e740 192 MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
Anna Bridge 186:707f6e361f3e 193 {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
Anna Bridge 186:707f6e361f3e 194 {PA_12, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI5)},
Anna Bridge 186:707f6e361f3e 195 {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
Anna Bridge 186:707f6e361f3e 196 {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 197 {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 198 {NC, NC, 0}
<> 149:156823d33999 199 };
<> 149:156823d33999 200
AnnaBridge 181:57724642e740 201 MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
Anna Bridge 186:707f6e361f3e 202 {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to LD2 [Green Led]
Anna Bridge 186:707f6e361f3e 203 {PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI5)},
Anna Bridge 186:707f6e361f3e 204 {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to SWO
Anna Bridge 186:707f6e361f3e 205 {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 206 {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 207 {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 208 {NC, NC, 0}
<> 149:156823d33999 209 };
<> 149:156823d33999 210
AnnaBridge 181:57724642e740 211 MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
Anna Bridge 186:707f6e361f3e 212 {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
Anna Bridge 186:707f6e361f3e 213 {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
Anna Bridge 186:707f6e361f3e 214 {PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI5)},
Anna Bridge 186:707f6e361f3e 215 {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 216 {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
Anna Bridge 186:707f6e361f3e 217 {NC, NC, 0}
<> 149:156823d33999 218 };