mbed official / mbed-dev

mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

targets/TARGET_STM/TARGET_STM32F7/TARGET_STM32F769xI/TARGET_DISCO_F769NI/PeripheralPins.c@181:57724642e740, 2018-02-16 (annotated)

Committer:
AnnaBridge
Date:
Fri Feb 16 16:09:33 2018 +0000
Revision:
181:57724642e740
Parent:
163:74e0ce7f98e8
Child:
186:707f6e361f3e
mbed-dev library. Release version 159.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 149:156823d33999 1 /* mbed Microcontroller Library
<> 149:156823d33999 2 *******************************************************************************
<> 149:156823d33999 3 * Copyright (c) 2016, STMicroelectronics
<> 149:156823d33999 4 * All rights reserved.
<> 149:156823d33999 5 *
<> 149:156823d33999 6 * Redistribution and use in source and binary forms, with or without
<> 149:156823d33999 7 * modification, are permitted provided that the following conditions are met:
<> 149:156823d33999 8 *
<> 149:156823d33999 9 * 1. Redistributions of source code must retain the above copyright notice,
<> 149:156823d33999 10 * this list of conditions and the following disclaimer.
<> 149:156823d33999 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
<> 149:156823d33999 12 * this list of conditions and the following disclaimer in the documentation
<> 149:156823d33999 13 * and/or other materials provided with the distribution.
<> 149:156823d33999 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
<> 149:156823d33999 15 * may be used to endorse or promote products derived from this software
<> 149:156823d33999 16 * without specific prior written permission.
<> 149:156823d33999 17 *
<> 149:156823d33999 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
<> 149:156823d33999 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
<> 149:156823d33999 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
<> 149:156823d33999 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
<> 149:156823d33999 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
<> 149:156823d33999 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
<> 149:156823d33999 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
<> 149:156823d33999 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
<> 149:156823d33999 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
<> 149:156823d33999 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
<> 149:156823d33999 28 *******************************************************************************
<> 149:156823d33999 29 */
<> 149:156823d33999 30
<> 149:156823d33999 31 #include "PeripheralPins.h"
AnnaBridge 181:57724642e740 32 #include "mbed_toolchain.h"
<> 149:156823d33999 33
<> 149:156823d33999 34 // =============================================================================
<> 149:156823d33999 35 // Notes:
<> 149:156823d33999 36 // * Commented lines are alternative possibilities which are not used per default.
<> 149:156823d33999 37 // If you change them, you will have also to modify the corresponding xxx_api.c file
<> 149:156823d33999 38 // for pwmout, analogin, analogout, ...
<> 149:156823d33999 39 // * Only the pins that are placed on the Arduino connector are described.
<> 149:156823d33999 40 // =============================================================================
<> 149:156823d33999 41
<> 149:156823d33999 42 //*** ADC ***
<> 149:156823d33999 43
AnnaBridge 181:57724642e740 44 MBED_WEAK const PinMap PinMap_ADC[] = {
<> 149:156823d33999 45 // {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 - ARDUINO A1
<> 149:156823d33999 46 {PA_4, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4 - ARDUINO A1
<> 149:156823d33999 47 // {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 - ARDUINO A0
<> 149:156823d33999 48 {PA_6, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6 - ARDUINO A0
<> 149:156823d33999 49 {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,12, 0)}, // ADC1_IN12 - ARDUINO A2
<> 149:156823d33999 50 // {PC_2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,12, 0)}, // ADC2_IN12 - ARDUINO A2
<> 149:156823d33999 51 {PF_6, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 - ARDUINO D3
<> 149:156823d33999 52 {PF_7, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 - ARDUINO D6
<> 149:156823d33999 53 {PF_8, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 - ARDUINO A4
<> 149:156823d33999 54 {PF_9, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7 - ARDUINO A5
<> 149:156823d33999 55 {PF_10, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 - ARDUINO A3
Anna Bridge 163:74e0ce7f98e8 56 {NC, NC, 0}
Anna Bridge 163:74e0ce7f98e8 57 };
Anna Bridge 163:74e0ce7f98e8 58
AnnaBridge 181:57724642e740 59 MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
<> 149:156823d33999 60 {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // See in analogin_api.c the correct ADC channel used
<> 149:156823d33999 61 {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // See in analogin_api.c the correct ADC channel used
<> 149:156823d33999 62 {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // See in analogin_api.c the correct ADC channel used
<> 149:156823d33999 63 {NC, NC, 0}
<> 149:156823d33999 64 };
<> 149:156823d33999 65
<> 149:156823d33999 66 //*** DAC ***
<> 149:156823d33999 67
AnnaBridge 181:57724642e740 68 MBED_WEAK const PinMap PinMap_DAC[] = {
<> 149:156823d33999 69 {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 1, 0)}, // DAC_OUT1 (ARDUINO A1)
<> 149:156823d33999 70 // {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 2, 0)}, // DAC_OUT2 - used by USB3320C
<> 149:156823d33999 71 {NC, NC, 0}
<> 149:156823d33999 72 };
<> 149:156823d33999 73
<> 149:156823d33999 74 //*** I2C ***
<> 149:156823d33999 75
AnnaBridge 181:57724642e740 76 MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
<> 157:ff67d9f36b67 77 // {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // used by Audio_SDA
<> 157:ff67d9f36b67 78 {PB_7, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF11_I2C4)}, // used by Audio_SDA // CN1 pin 40
<> 149:156823d33999 79 {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D14/SDA
<> 149:156823d33999 80 {NC, NC, 0}
<> 149:156823d33999 81 };
<> 149:156823d33999 82
AnnaBridge 181:57724642e740 83 MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
<> 157:ff67d9f36b67 84 {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D15/SCL
<> 157:ff67d9f36b67 85 {PD_12, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)}, // used by Audio_SCL // CN1 pin 44
<> 149:156823d33999 86 {NC, NC, 0}
<> 149:156823d33999 87 };
<> 149:156823d33999 88
<> 149:156823d33999 89 //*** PWM ***
<> 149:156823d33999 90
AnnaBridge 181:57724642e740 91 MBED_WEAK const PinMap PinMap_PWM[] = {
<> 149:156823d33999 92 {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO A0
<> 149:156823d33999 93 // {PA_6, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 - ARDUINO A0
<> 149:156823d33999 94 {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 - ARDUINO D10
<> 149:156823d33999 95
<> 149:156823d33999 96 {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - ARDUINO D15
<> 149:156823d33999 97 // {PB_8, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 - ARDUINO D15
<> 149:156823d33999 98 {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - ARDUINO D14
<> 149:156823d33999 99 // {PB_9, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - ARDUINO D14
<> 149:156823d33999 100 // {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N - ARDUINO D12
<> 149:156823d33999 101 // {PB_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N - ARDUINO D12
<> 149:156823d33999 102 {PB_14, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 - ARDUINO D12
<> 149:156823d33999 103 // {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N - ARDUINO D11
<> 149:156823d33999 104 // {PB_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N - ARDUINO D11
<> 149:156823d33999 105 {PB_15, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2 - ARDUINO D11
<> 149:156823d33999 106
<> 149:156823d33999 107 {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1 - ARDUINO D1
<> 149:156823d33999 108 // {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO D1
<> 149:156823d33999 109 {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 - ARDUINO D0
<> 149:156823d33999 110 // {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO D0
<> 149:156823d33999 111 {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - ARDUINO D5
<> 149:156823d33999 112 // {PC_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3 - ARDUINO D5
<> 149:156823d33999 113
<> 149:156823d33999 114 {PF_6, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 - ARDUINO D3
<> 149:156823d33999 115 {PF_7, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - ARDUINO D6
<> 149:156823d33999 116 {PF_8, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 - ARDUINO A4
<> 149:156823d33999 117 {PF_9, PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 - ARDUINO A5
<> 149:156823d33999 118
<> 149:156823d33999 119 {PH_6, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 - ARDUINO D9
<> 149:156823d33999 120 {NC, NC, 0}
<> 149:156823d33999 121 };
<> 149:156823d33999 122
<> 149:156823d33999 123 //*** SERIAL ***
<> 149:156823d33999 124
AnnaBridge 181:57724642e740 125 MBED_WEAK const PinMap PinMap_UART_TX[] = {
<> 149:156823d33999 126 {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by stlink usb)
<> 157:ff67d9f36b67 127 // {PA_12, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4 )}, // ARDUINO D13 - remove SB15 to use it // LD3
<> 149:156823d33999 128 {PB_9, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)}, // ARDUINO D14
<> 149:156823d33999 129 {PB_14, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // ARDUINO D12
<> 149:156823d33999 130 {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D1
<> 149:156823d33999 131 {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5 )}, // WIFI_RX
<> 149:156823d33999 132 {PF_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7 )}, // ARDUINO D6
<> 149:156823d33999 133 {NC, NC, 0}
<> 149:156823d33999 134 };
<> 149:156823d33999 135
AnnaBridge 181:57724642e740 136 MBED_WEAK const PinMap PinMap_UART_RX[] = {
<> 149:156823d33999 137 {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by st-link usb)
<> 149:156823d33999 138 {PA_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4 )}, // ARDUINO D10
<> 149:156823d33999 139 {PB_8, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5 )}, // ARDUINO D15
<> 149:156823d33999 140 {PB_15, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // ARDUINO D11
<> 149:156823d33999 141 {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D0
<> 149:156823d33999 142 {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5 )}, // WIFI_TX
<> 149:156823d33999 143 {PF_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7 )}, // ARDUINO D3
<> 149:156823d33999 144 {NC, NC, 0}
<> 149:156823d33999 145 };
<> 149:156823d33999 146
AnnaBridge 181:57724642e740 147 MBED_WEAK const PinMap PinMap_UART_RTS[] = {
<> 157:ff67d9f36b67 148 {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1 )}, // ARDUINO D13 // LD3
<> 149:156823d33999 149 {PB_14, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4 )}, // ARDUINO D12
<> 149:156823d33999 150 // {PB_14, USART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3 )}, // ARDUINO D12
<> 149:156823d33999 151 {PC_8, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5 )}, // ARDUINO D5
<> 149:156823d33999 152 {PF_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7 )}, // ARDUINO A4
<> 149:156823d33999 153 {NC, NC, 0}
<> 149:156823d33999 154 };
<> 149:156823d33999 155
AnnaBridge 181:57724642e740 156 MBED_WEAK const PinMap PinMap_UART_CTS[] = {
<> 149:156823d33999 157 {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // ARDUINO D10
<> 149:156823d33999 158 {PB_15, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4 )}, // ARDUINO D11
<> 149:156823d33999 159 {PF_9, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7 )}, // ARDUINO A5
<> 149:156823d33999 160 {NC, NC, 0}
<> 149:156823d33999 161 };
<> 149:156823d33999 162
<> 149:156823d33999 163 //*** SPI ***
<> 149:156823d33999 164
AnnaBridge 181:57724642e740 165 MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
<> 149:156823d33999 166 {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D11
<> 149:156823d33999 167 {PD_6, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI3)}, // SD card
<> 149:156823d33999 168 {PD_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // SD card
<> 149:156823d33999 169 {PF_9, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A5
<> 149:156823d33999 170 {NC, NC, 0}
<> 149:156823d33999 171 };
<> 149:156823d33999 172
AnnaBridge 181:57724642e740 173 MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
<> 149:156823d33999 174 {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // ARDUINO A0
<> 149:156823d33999 175 // {PA_6, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SPI6)}, // ARDUINO A0
<> 149:156823d33999 176 {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // SD card
<> 149:156823d33999 177 // {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, // SD card
<> 149:156823d33999 178 // {PB_4, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SPI6)}, // SD card
<> 149:156823d33999 179 {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D12
<> 149:156823d33999 180 {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO A2
<> 149:156823d33999 181 {PF_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A4
<> 149:156823d33999 182 {PG_9, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // SD card
<> 149:156823d33999 183 {NC, NC, 0}
<> 149:156823d33999 184 };
<> 149:156823d33999 185
AnnaBridge 181:57724642e740 186 MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
<> 157:ff67d9f36b67 187 {PA_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D13 // LD3
<> 149:156823d33999 188 {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // SD card
<> 149:156823d33999 189 // {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
<> 149:156823d33999 190 // {PB_3, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_SPI6)},
<> 149:156823d33999 191 {PF_7, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO D6
<> 149:156823d33999 192 {PH_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO D9
<> 149:156823d33999 193 {NC, NC, 0}
<> 149:156823d33999 194 };
<> 149:156823d33999 195
AnnaBridge 181:57724642e740 196 MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
<> 149:156823d33999 197 {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // ARDUINO A1
<> 149:156823d33999 198 // {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
<> 149:156823d33999 199 {PA_11, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D10
<> 149:156823d33999 200 {PB_4, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SPI2)}, // SD card
<> 149:156823d33999 201 {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D14
<> 149:156823d33999 202 {PF_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO D3
<> 149:156823d33999 203 {PG_10, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // SD card
<> 149:156823d33999 204 {NC, NC, 0}
<> 149:156823d33999 205 };
<> 149:156823d33999 206
<> 149:156823d33999 207 //*** CAN ***
<> 149:156823d33999 208
AnnaBridge 181:57724642e740 209 MBED_WEAK const PinMap PinMap_CAN_RD[] = {
<> 157:ff67d9f36b67 210 {PA_11, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, // ARDUINO D10
<> 157:ff67d9f36b67 211 {PB_8, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, // ARDUINO D15
<> 149:156823d33999 212 {NC, NC, 0}
<> 149:156823d33999 213 };
<> 149:156823d33999 214
AnnaBridge 181:57724642e740 215 MBED_WEAK const PinMap PinMap_CAN_TD[] = {
<> 157:ff67d9f36b67 216 {PA_12, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, // ARDUINO D13 // LD3
<> 157:ff67d9f36b67 217 {PB_9, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, // ARDUINO D14
<> 149:156823d33999 218 {NC, NC, 0}
<> 157:ff67d9f36b67 219 };