mbed official / mbed-dev

mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F413xH/TARGET_DISCO_F413ZH/PeripheralPins.c@181:57724642e740, 2018-02-16 (annotated)

Committer:
AnnaBridge
Date:
Fri Feb 16 16:09:33 2018 +0000
Revision:
181:57724642e740
Parent:
168:9672193075cf
Child:
186:707f6e361f3e
mbed-dev library. Release version 159.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
AnnaBridge 168:9672193075cf 1 /* mbed Microcontroller Library
AnnaBridge 168:9672193075cf 2 *******************************************************************************
AnnaBridge 168:9672193075cf 3 * Copyright (c) 2017, STMicroelectronics
AnnaBridge 168:9672193075cf 4 * All rights reserved.
AnnaBridge 168:9672193075cf 5 *
AnnaBridge 168:9672193075cf 6 * Redistribution and use in source and binary forms, with or without
AnnaBridge 168:9672193075cf 7 * modification, are permitted provided that the following conditions are met:
AnnaBridge 168:9672193075cf 8 *
AnnaBridge 168:9672193075cf 9 * 1. Redistributions of source code must retain the above copyright notice,
AnnaBridge 168:9672193075cf 10 * this list of conditions and the following disclaimer.
AnnaBridge 168:9672193075cf 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
AnnaBridge 168:9672193075cf 12 * this list of conditions and the following disclaimer in the documentation
AnnaBridge 168:9672193075cf 13 * and/or other materials provided with the distribution.
AnnaBridge 168:9672193075cf 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
AnnaBridge 168:9672193075cf 15 * may be used to endorse or promote products derived from this software
AnnaBridge 168:9672193075cf 16 * without specific prior written permission.
AnnaBridge 168:9672193075cf 17 *
AnnaBridge 168:9672193075cf 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AnnaBridge 168:9672193075cf 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
AnnaBridge 168:9672193075cf 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
AnnaBridge 168:9672193075cf 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
AnnaBridge 168:9672193075cf 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
AnnaBridge 168:9672193075cf 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
AnnaBridge 168:9672193075cf 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
AnnaBridge 168:9672193075cf 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
AnnaBridge 168:9672193075cf 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
AnnaBridge 168:9672193075cf 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
AnnaBridge 168:9672193075cf 28 *******************************************************************************
AnnaBridge 168:9672193075cf 29 */
AnnaBridge 168:9672193075cf 30
AnnaBridge 168:9672193075cf 31 #include "PeripheralPins.h"
AnnaBridge 181:57724642e740 32 #include "mbed_toolchain.h"
AnnaBridge 168:9672193075cf 33
AnnaBridge 168:9672193075cf 34 // =====
AnnaBridge 168:9672193075cf 35 // Note: Commented lines are alternative possibilities which are not used per default.
AnnaBridge 168:9672193075cf 36 // If you change them, you will have also to modify the corresponding xxx_api.c file
AnnaBridge 168:9672193075cf 37 // for pwmout, analogin, analogout, ...
AnnaBridge 168:9672193075cf 38 // =====
AnnaBridge 168:9672193075cf 39
AnnaBridge 168:9672193075cf 40 //*** ADC ***
AnnaBridge 168:9672193075cf 41
AnnaBridge 181:57724642e740 42 MBED_WEAK const PinMap PinMap_ADC[] = {
AnnaBridge 168:9672193075cf 43 {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // Pin not available on any connector - Used to drive the USER-BUTTON
AnnaBridge 168:9672193075cf 44 {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ARDUINO A1
AnnaBridge 168:9672193075cf 45 {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ARDUINO A2
AnnaBridge 168:9672193075cf 46 {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 47 {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ARDUINO D8
AnnaBridge 168:9672193075cf 48 {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ARDUINO A3
AnnaBridge 168:9672193075cf 49 {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 50 {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 51 {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ARDUINO D6
AnnaBridge 168:9672193075cf 52 {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ARDUINO A4
AnnaBridge 168:9672193075cf 53 {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ARDUINO A0
AnnaBridge 168:9672193075cf 54 {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 55 {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 56 {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 57 {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ARDUINO A5
AnnaBridge 168:9672193075cf 58 {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // Pin not available on any connector - Connected to board LED3
AnnaBridge 168:9672193075cf 59 {NC, NC, 0}
AnnaBridge 168:9672193075cf 60 };
AnnaBridge 168:9672193075cf 61
AnnaBridge 181:57724642e740 62 MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
AnnaBridge 168:9672193075cf 63 {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // See in analogin_api.c the correct ADC channel used
AnnaBridge 168:9672193075cf 64 {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // See in analogin_api.c the correct ADC channel used
AnnaBridge 168:9672193075cf 65 {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // See in analogin_api.c the correct ADC channel used
AnnaBridge 168:9672193075cf 66 {NC, NC, 0}
AnnaBridge 168:9672193075cf 67 };
AnnaBridge 168:9672193075cf 68
AnnaBridge 168:9672193075cf 69 //*** DAC ***
AnnaBridge 168:9672193075cf 70
AnnaBridge 181:57724642e740 71 MBED_WEAK const PinMap PinMap_DAC[] = {
AnnaBridge 168:9672193075cf 72 {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ARDUINO D8
AnnaBridge 168:9672193075cf 73 {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ARDUINO A3
AnnaBridge 168:9672193075cf 74 {NC, NC, 0}
AnnaBridge 168:9672193075cf 75 };
AnnaBridge 168:9672193075cf 76
AnnaBridge 168:9672193075cf 77 //*** I2C ***
AnnaBridge 168:9672193075cf 78
AnnaBridge 181:57724642e740 79 MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
AnnaBridge 168:9672193075cf 80 {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 81 {PB_3_ALT0, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 82 {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, // ARDUINO D12 - Connected to WIFI module
AnnaBridge 168:9672193075cf 83 {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 84 {PB_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, // ARDUINO D9
AnnaBridge 168:9672193075cf 85 {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 86 {PB_9_ALT0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 87 {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // ARDUINO D14
AnnaBridge 168:9672193075cf 88 {PB_14, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 89 {PC_7, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 90 {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 91 {PD_13, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 92 {PD_15, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 93 {PF_0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 94 {PF_15, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 95 {NC, NC, 0}
AnnaBridge 168:9672193075cf 96 };
AnnaBridge 168:9672193075cf 97
AnnaBridge 181:57724642e740 98 MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
AnnaBridge 168:9672193075cf 99 {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 100 {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D4
AnnaBridge 168:9672193075cf 101 {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D9
AnnaBridge 168:9672193075cf 102 {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // ARDUINO D15
AnnaBridge 168:9672193075cf 103 {PB_10_ALT0, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_FMPI2C1)}, // ARDUINO D15
AnnaBridge 168:9672193075cf 104 {PB_15, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 105 {PC_6, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 106 {PD_12, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 107 {PD_14, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 108 {PF_1, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 109 {PF_14, FMPI2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 110 {NC, NC, 0}
AnnaBridge 168:9672193075cf 111 };
AnnaBridge 168:9672193075cf 112
AnnaBridge 168:9672193075cf 113 //*** PWM ***
AnnaBridge 168:9672193075cf 114
AnnaBridge 168:9672193075cf 115 // Pins using PWM_5 (TIM5) cannot be used as TIM5 is already used by ticker.
AnnaBridge 181:57724642e740 116 MBED_WEAK const PinMap PinMap_PWM[] = {
AnnaBridge 168:9672193075cf 117 {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // Pin not available on any connector - Used to drive the USER-BUTTON
AnnaBridge 168:9672193075cf 118 // {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // Pin not available on any connector - Used to drive the USER-BUTTON
AnnaBridge 168:9672193075cf 119 {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // ARDUINO A1
AnnaBridge 168:9672193075cf 120 // {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // ARDUINO A1
AnnaBridge 168:9672193075cf 121 {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // ARDUINO A2
AnnaBridge 168:9672193075cf 122 // {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // ARDUINO A2
AnnaBridge 168:9672193075cf 123 {PA_2_ALT0, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // ARDUINO A2
AnnaBridge 168:9672193075cf 124 {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 125 // {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 126 {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 127 {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // ARDUINO A3
AnnaBridge 168:9672193075cf 128 {PA_5_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // ARDUINO A3
AnnaBridge 168:9672193075cf 129 {PA_6, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 130 {PA_6_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 131 {PA_7, PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 132 {PA_7_ALT0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 133 {PA_7_ALT1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 134 {PA_7_ALT2, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 135 {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 136 {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 137 {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 138 {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 139 {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // ARDUINO D10
AnnaBridge 168:9672193075cf 140 {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // ARDUINO D6
AnnaBridge 168:9672193075cf 141 {PB_0_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // ARDUINO D6
AnnaBridge 168:9672193075cf 142 {PB_0_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // ARDUINO D6
AnnaBridge 168:9672193075cf 143 {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // ARDUINO A4
AnnaBridge 168:9672193075cf 144 {PB_1_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // ARDUINO A4
AnnaBridge 168:9672193075cf 145 {PB_1_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // ARDUINO A4
AnnaBridge 168:9672193075cf 146 {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 147 {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // ARDUINO D12 - Connected to WIFI module
AnnaBridge 168:9672193075cf 148 {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // ARDUINO D11 - Connected to WIFI module
AnnaBridge 168:9672193075cf 149 {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // ARDUINO D4
AnnaBridge 168:9672193075cf 150 {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 151 {PB_8, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // ARDUINO D9
AnnaBridge 168:9672193075cf 152 {PB_8_ALT0, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // ARDUINO D9
AnnaBridge 168:9672193075cf 153 {PB_9, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 154 {PB_9_ALT0, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 155 {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // ARDUINO D15
AnnaBridge 168:9672193075cf 156 {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // ARDUINO D14
AnnaBridge 168:9672193075cf 157 {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 158 {PB_14, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 159 {PB_14_ALT0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 160 {PB_14_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 161 {PB_15, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 162 {PB_15_ALT0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 163 {PB_15_ALT1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 164 {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 165 {PC_6_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 166 {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 167 {PC_7_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 168 {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 169 {PC_8_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 170 {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 171 {PC_9_ALT0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 172 {PD_12, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 173 {PD_13, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 174 {PD_14, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 175 {PD_15, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 176 {PE_5, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 177 {PE_6, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // ARDUINO D5
AnnaBridge 168:9672193075cf 178 {PE_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 179 {PE_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 180 {PE_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 181 {PE_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 182 {PE_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 183 {PE_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 184 {PE_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 185 // {PF_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 186 // {PF_4, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 187 // {PF_5, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 188 {PF_6, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // ARDUINO D0
AnnaBridge 168:9672193075cf 189 {PF_7, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // ARDUINO D1
AnnaBridge 168:9672193075cf 190 {PF_8, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 191 {PF_9, PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 192 // {PF_10, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // ARDUINO D3
AnnaBridge 168:9672193075cf 193 {NC, NC, 0}
AnnaBridge 168:9672193075cf 194 };
AnnaBridge 168:9672193075cf 195
AnnaBridge 168:9672193075cf 196 //*** SERIAL ***
AnnaBridge 168:9672193075cf 197
AnnaBridge 181:57724642e740 198 MBED_WEAK const PinMap PinMap_UART_TX[] = {
AnnaBridge 168:9672193075cf 199 {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // Pin not available on any connector - Used to drive the USER-BUTTON
AnnaBridge 168:9672193075cf 200 {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // ARDUINO A2
AnnaBridge 168:9672193075cf 201 {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 202 {PA_12, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 203 {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 204 {PA_15, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // ARDUINO D10
AnnaBridge 168:9672193075cf 205 {PA_15_ALT0, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // ARDUINO D10
AnnaBridge 168:9672193075cf 206 {PB_4, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // ARDUINO D12 - Connected to WIFI module
AnnaBridge 168:9672193075cf 207 {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // ARDUINO D4
AnnaBridge 168:9672193075cf 208 {PB_6_ALT0, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART5)}, // ARDUINO D4
AnnaBridge 168:9672193075cf 209 {PB_9, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART5)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 210 {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // ARDUINO D15
AnnaBridge 168:9672193075cf 211 {PB_13, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART5)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 212 {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 213 {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 214 {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 215 {PD_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 216 {PD_5, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 217 {PD_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 218 {PD_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 219 {PD_15, UART_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 220 {PE_1, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 221 {PE_3, UART_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART10)}, // Pin not available on any connector - Connected to board LED4
AnnaBridge 168:9672193075cf 222 {PE_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 223 {PG_1, UART_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 224 {PG_12, UART_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART10)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 225 {PF_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // ARDUINO D1
AnnaBridge 168:9672193075cf 226 {PF_9, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 227 {PG_14, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // Pin not available on any connector - STDIO_UART_TX
AnnaBridge 168:9672193075cf 228 {NC, NC, 0}
AnnaBridge 168:9672193075cf 229 };
AnnaBridge 168:9672193075cf 230
AnnaBridge 181:57724642e740 231 MBED_WEAK const PinMap PinMap_UART_RX[] = {
AnnaBridge 168:9672193075cf 232 {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // ARDUINO A1
AnnaBridge 168:9672193075cf 233 {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 234 {PA_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 235 {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 236 {PA_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 237 {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 238 {PB_3, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 239 {PB_3_ALT0, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 240 {PB_5, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART5)}, // ARDUINO D11 - Connected to WIFI module
AnnaBridge 168:9672193075cf 241 {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 242 {PB_8, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART5)}, // ARDUINO D9
AnnaBridge 168:9672193075cf 243 {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // ARDUINO D14
AnnaBridge 168:9672193075cf 244 {PB_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART5)}, // ARDUINO D13 - Connected to board LED5 and WIFI module
AnnaBridge 168:9672193075cf 245 {PC_5, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Pin not available on any connector - Connected to board LED3
AnnaBridge 168:9672193075cf 246 {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 247 {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 248 {PC_11_ALT0, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 249 {PD_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 250 {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 251 {PD_6, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 252 {PD_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 253 {PD_14, UART_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 254 {PE_0, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 255 {PE_2, UART_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART10)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 256 {PE_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 257 {PF_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // ARDUINO D0
AnnaBridge 168:9672193075cf 258 {PF_8, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 259 {PG_0, UART_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART9)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 260 {PG_9, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // Pin not available on any connector - STDIO_UART_RX
AnnaBridge 168:9672193075cf 261 {PG_11, UART_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART10)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 262 {NC, NC, 0}
AnnaBridge 168:9672193075cf 263 };
AnnaBridge 168:9672193075cf 264
AnnaBridge 181:57724642e740 265 MBED_WEAK const PinMap PinMap_UART_RTS[] = {
AnnaBridge 168:9672193075cf 266 {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // ARDUINO A1
AnnaBridge 168:9672193075cf 267 {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 268 {PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 269 {PD_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 270 {PD_12, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 271 {PG_8, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 272 {PG_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 273 {NC, NC, 0}
AnnaBridge 168:9672193075cf 274 };
AnnaBridge 168:9672193075cf 275
AnnaBridge 181:57724642e740 276 MBED_WEAK const PinMap PinMap_UART_CTS[] = {
AnnaBridge 168:9672193075cf 277 {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Pin not available on any connector - Used to drive the USER-BUTTON
AnnaBridge 168:9672193075cf 278 {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 279 {PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 280 {PD_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 281 {PD_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 282 {PG_13, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D2
AnnaBridge 168:9672193075cf 283 {PG_15, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 284 {NC, NC, 0}
AnnaBridge 168:9672193075cf 285 };
AnnaBridge 168:9672193075cf 286
AnnaBridge 168:9672193075cf 287 //*** SPI ***
AnnaBridge 168:9672193075cf 288
AnnaBridge 181:57724642e740 289 MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
AnnaBridge 168:9672193075cf 290 {PA_1, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, // ARDUINO A1
AnnaBridge 168:9672193075cf 291 {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 292 {PA_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 293 {PA_10_ALT0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 294 {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // ARDUINO D11 - Connected to WIFI module
AnnaBridge 168:9672193075cf 295 {PB_5_ALT0, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D11 - Connected to WIFI module
AnnaBridge 168:9672193075cf 296 {PB_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)}, // ARDUINO D9
AnnaBridge 168:9672193075cf 297 {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 298 {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 299 {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 300 {PD_6, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 301 {PE_6, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, // ARDUINO D5
AnnaBridge 168:9672193075cf 302 {PE_6_ALT0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)}, // ARDUINO D5
AnnaBridge 168:9672193075cf 303 {PE_14, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 304 {PE_14_ALT0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 305 {NC, NC, 0}
AnnaBridge 168:9672193075cf 306 };
AnnaBridge 168:9672193075cf 307
AnnaBridge 181:57724642e740 308 MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
AnnaBridge 168:9672193075cf 309 {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 310 {PA_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 311 {PA_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 312 {PA_12_ALT0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 313 {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // ARDUINO D12 - Connected to WIFI module
AnnaBridge 168:9672193075cf 314 {PB_4_ALT0, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D12 - Connected to WIFI module
AnnaBridge 168:9672193075cf 315 {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 316 {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 317 {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 318 {PE_5, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 319 {PE_5_ALT0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 320 {PE_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 321 {PE_13_ALT0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 322 {NC, NC, 0}
AnnaBridge 168:9672193075cf 323 };
AnnaBridge 168:9672193075cf 324
AnnaBridge 181:57724642e740 325 MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
AnnaBridge 168:9672193075cf 326 {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO A3
AnnaBridge 168:9672193075cf 327 {PA_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 328 {PB_0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)}, // ARDUINO D6
AnnaBridge 168:9672193075cf 329 {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 330 {PB_3_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 331 {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // ARDUINO D15
AnnaBridge 168:9672193075cf 332 {PB_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)}, // ARDUINO D13 - Connected to board LED5 and WIFI module
AnnaBridge 168:9672193075cf 333 {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 334 {PB_13_ALT0, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 335 {PC_7, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 336 {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 337 {PD_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 338 {PE_2, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 339 {PE_2_ALT0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 340 {PE_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 341 {PE_12_ALT0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 342 {NC, NC, 0}
AnnaBridge 168:9672193075cf 343 };
AnnaBridge 168:9672193075cf 344
AnnaBridge 181:57724642e740 345 MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
AnnaBridge 168:9672193075cf 346 {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D8
AnnaBridge 168:9672193075cf 347 {PA_4_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 348 {PA_11, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 349 {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // ARDUINO D10
AnnaBridge 168:9672193075cf 350 {PA_15_ALT0, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D10
AnnaBridge 168:9672193075cf 351 {PB_1, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)}, // ARDUINO A4
AnnaBridge 168:9672193075cf 352 {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 353 {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // ARDUINO D13 - Connected to board LED5 and WIFI module
AnnaBridge 168:9672193075cf 354 {PB_12_ALT0, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI4)}, // ARDUINO D13 - Connected to board LED5 and WIFI module
AnnaBridge 168:9672193075cf 355 {PE_4, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 356 {PE_4_ALT0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 357 {PE_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 358 {PE_11_ALT0, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI5)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 359 {NC, NC, 0}
AnnaBridge 168:9672193075cf 360 };
AnnaBridge 168:9672193075cf 361
AnnaBridge 168:9672193075cf 362 //*** CAN ***
AnnaBridge 168:9672193075cf 363
AnnaBridge 181:57724642e740 364 MBED_WEAK const PinMap PinMap_CAN_RD[] = {
AnnaBridge 168:9672193075cf 365 {PA_11, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 366 {PA_8, CAN_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF11_CAN3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 367 {PB_5, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)}, // ARDUINO D11 - Connected to WIFI module
AnnaBridge 168:9672193075cf 368 {PB_3, CAN_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF11_CAN3)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 369 {PB_8, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_CAN1)}, // ARDUINO D9
AnnaBridge 168:9672193075cf 370 {PB_12, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)}, // ARDUINO D13 - Connected to board LED5 and WIFI module
AnnaBridge 168:9672193075cf 371 {PD_0, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 372 {PG_0, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 373 {PG_11, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 374 {NC, NC, 0}
AnnaBridge 168:9672193075cf 375 };
AnnaBridge 168:9672193075cf 376
AnnaBridge 181:57724642e740 377 MBED_WEAK const PinMap PinMap_CAN_TD[] = {
AnnaBridge 168:9672193075cf 378 {PA_12, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 379 {PA_15, CAN_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF11_CAN3)}, // ARDUINO D10
AnnaBridge 168:9672193075cf 380 {PB_4, CAN_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF11_CAN3)}, // ARDUINO D12 - Connected to WIFI module
AnnaBridge 168:9672193075cf 381 {PB_6, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)}, // ARDUINO D4
AnnaBridge 168:9672193075cf 382 {PB_9, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF8_CAN1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 383 {PB_13, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 384 {PD_1, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 385 {PG_1, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 386 {PG_12, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)}, // Pin not available on any connector
AnnaBridge 168:9672193075cf 387 {NC, NC, 0}
AnnaBridge 168:9672193075cf 388 };