Diff: include/lwip/sio.h

Revision:

0:51ac1d130fd4

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/include/lwip/sio.h	Fri Jun 22 09:25:39 2012 +0000
@@ -0,0 +1,141 @@
+/*
+ * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
+ * All rights reserved. 
+ * 
+ * Redistribution and use in source and binary forms, with or without modification, 
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission. 
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ */
+
+/*
+ * This is the interface to the platform specific serial IO module
+ * It needs to be implemented by those platforms which need SLIP or PPP
+ */
+
+#ifndef __SIO_H__
+#define __SIO_H__
+
+#include "lwip/arch.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* If you want to define sio_fd_t elsewhere or differently,
+   define this in your cc.h file. */
+#ifndef __sio_fd_t_defined
+typedef void * sio_fd_t;
+#endif
+
+/* The following functions can be defined to something else in your cc.h file
+   or be implemented in your custom sio.c file. */
+
+#ifndef sio_open
+/**
+ * Opens a serial device for communication.
+ * 
+ * @param devnum device number
+ * @return handle to serial device if successful, NULL otherwise
+ */
+sio_fd_t sio_open(u8_t devnum);
+#endif
+
+#ifndef sio_send
+/**
+ * Sends a single character to the serial device.
+ * 
+ * @param c character to send
+ * @param fd serial device handle
+ * 
+ * @note This function will block until the character can be sent.
+ */
+void sio_send(u8_t c, sio_fd_t fd);
+#endif
+
+#ifndef sio_recv
+/**
+ * Receives a single character from the serial device.
+ * 
+ * @param fd serial device handle
+ * 
+ * @note This function will block until a character is received.
+ */
+u8_t sio_recv(sio_fd_t fd);
+#endif
+
+#ifndef sio_read
+/**
+ * Reads from the serial device.
+ * 
+ * @param fd serial device handle
+ * @param data pointer to data buffer for receiving
+ * @param len maximum length (in bytes) of data to receive
+ * @return number of bytes actually received - may be 0 if aborted by sio_read_abort
+ * 
+ * @note This function will block until data can be received. The blocking
+ * can be cancelled by calling sio_read_abort().
+ */
+u32_t sio_read(sio_fd_t fd, u8_t *data, u32_t len);
+#endif
+
+#ifndef sio_tryread
+/**
+ * Tries to read from the serial device. Same as sio_read but returns
+ * immediately if no data is available and never blocks.
+ * 
+ * @param fd serial device handle
+ * @param data pointer to data buffer for receiving
+ * @param len maximum length (in bytes) of data to receive
+ * @return number of bytes actually received
+ */
+u32_t sio_tryread(sio_fd_t fd, u8_t *data, u32_t len);
+#endif
+
+#ifndef sio_write
+/**
+ * Writes to the serial device.
+ * 
+ * @param fd serial device handle
+ * @param data pointer to data to send
+ * @param len length (in bytes) of data to send
+ * @return number of bytes actually sent
+ * 
+ * @note This function will block until all data can be sent.
+ */
+u32_t sio_write(sio_fd_t fd, u8_t *data, u32_t len);
+#endif
+
+#ifndef sio_read_abort
+/**
+ * Aborts a blocking sio_read() call.
+ * 
+ * @param fd serial device handle
+ */
+void sio_read_abort(sio_fd_t fd);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __SIO_H__ */