Fork for adding SAM L21 Xplained Pro support

Fork of SX1276Lib by Semtech

History

Added pinning for SAM L21 Xplained Pro default tip

2017-05-16, by martinichka [Tue, 16 May 2017 12:08:24 +0000] rev 27

Added pinning for SAM L21 Xplained Pro


WARNING: Radio API timings changed from micro-seconds to milliseconds; ; Synchronized with https://github.com/Lora-net/LoRaMac-node git revision e506c246652fa44c3f24cecb89d0707b49ece739

2017-04-24, by mluis [Mon, 24 Apr 2017 09:26:23 +0000] rev 26

WARNING: Radio API timings changed from micro-seconds to milliseconds; ; Synchronized with https://github.com/Lora-net/LoRaMac-node git revision e506c246652fa44c3f24cecb89d0707b49ece739


Synchronized with https://github.com/Lora-net/LoRaMac-node radio drivers git revision 55d16ca8949c09ee241c87b7600e2a8bc90d3743

2016-05-13, by mluis [Fri, 13 May 2016 15:09:10 +0000] rev 25

Synchronized with https://github.com/Lora-net/LoRaMac-node radio drivers git revision 55d16ca8949c09ee241c87b7600e2a8bc90d3743


Corrected the frequency check condition for // ERRATA 2.1 - Sensitivity Optimization with a 500 kHz Bandwidth

2016-03-15, by mluis [Tue, 15 Mar 2016 13:12:44 +0000] rev 24

Corrected the frequency check condition for // ERRATA 2.1 - Sensitivity Optimization with a 500 kHz Bandwidth


Change FSK driver for long payload support

2016-03-10, by GregCr [Thu, 10 Mar 2016 10:00:54 +0000] rev 23

Change FSK driver for long payload support


Synchronized the drivers with GitHub version.; Mainly added errata note recommendations

2015-11-26, by mluis [Thu, 26 Nov 2015 16:55:15 +0000] rev 22

Synchronized the drivers with GitHub version.; Mainly added errata note recommendations


Made radio driver API compatible with GitHub radio driver

2015-11-26, by mluis [Thu, 26 Nov 2015 10:39:03 +0000] rev 21

Made radio driver API compatible with GitHub radio driver


Addded SetMaxPayloadLength API to the driver

2015-10-20, by mluis [Tue, 20 Oct 2015 12:58:58 +0000] rev 20

Addded SetMaxPayloadLength API to the driver


Change SX1276 function GetState() into GetStatus()

2015-08-12, by GregCr [Wed, 12 Aug 2015 14:34:03 +0000] rev 19

Change SX1276 function GetState() into GetStatus()


Added check for CRC enable before checking if the CRC is correct or not

2015-07-10, by GregCr [Fri, 10 Jul 2015 14:24:45 +0000] rev 18

Added check for CRC enable before checking if the CRC is correct or not