Revision 0:cad1a4329bd8, committed 2020-11-03

Comitter:

markschwarzer

Date:

Tue Nov 03 21:15:25 2020 +0000

Commit message:

final, compiles

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Tue Nov 03 21:15:25 2020 +0000
@@ -0,0 +1,59 @@
+//Mark Schwarzer Assignment 6 Part 2
+#include "mbed.h"
+
+PwmOut servo(p19);
+AnalogIn Pcell(p20);
+DigitalIn switch_input(p17);
+Serial pc(USBTX,USBRX);
+float V; //voltage
+float angle;
+
+//Run through a range of pulse widths, report to serial output:
+void servo_test(float period, float minPulse, float maxPulse, float pulseStep)
+{
+    float currentPulse;
+    servo.period(period); //set the PWM period
+ 
+    //Vary the pulse width from minimum to maximum in steps.
+    pc.printf("Commencing Servo Test\r\n");
+    for (currentPulse=minPulse; currentPulse<maxPulse; currentPulse=currentPulse+pulseStep) {
+        servo.pulsewidth(currentPulse/1000000.000); //convert uSec to sec.
+        pc.printf("Current pulse width is %f\r\n",currentPulse);
+        wait(0.5);
+    }
+    pc.printf("Servo Test Finished\r\n");
+}
+ 
+ 
+//Sends correct pulse width to servo to achieve desired angle:
+void servo_set_angle(float angle)
+{
+    float pulseCoeff = 10.0;
+    float pulseOffset = 400;
+    float pulseWidth;
+ 
+    //Check to make sure commanded angle is within min-max bounds:
+    if (angle < 0) {
+        angle = 0;
+    } else if (angle > 180) {
+        angle = 180.0;
+    }
+ 
+    //Calculate pulsewidth for the desired angle and issue command:
+    pulseWidth = pulseCoeff * angle + pulseOffset;
+    servo.pulsewidth(pulseWidth/1000000.000);
+}
+ 
+int main()
+{
+V=(3.3);
+wait(3);
+servo.period(0.01);
+float voltageLight;
+
+while(1)  {
+    voltageLight= Pcell.read()*V;
+    angle=(180*V);
+    pc.printf("Servo Angle: %5.2f\r\n",angle);
+    pc.printf("Voltage;%f",voltageLight);
+    wait(1); }}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Tue Nov 03 21:15:25 2020 +0000
@@ -0,0 +1,1 @@
+https://os.mbed.com/users/mbed_official/code/mbed/builds/65be27845400
\ No newline at end of file