Mario Bambagini
This project aims at hacking a remote controlled car by replacing the tx/rx and navigation systems. This project implements the car side.
Dependencies: mbed-rtos mbed ssWi
This project consists of a remote controller which pilots a car holding a video camera onboard. It is divided in two main parts:
- user side: the microcontroller reads the user input from the joystick (four potentiometers), elaborates them and then sends those commands through the wireless connection (using a XBee module);
- car side: the microcontroller receives the sent commands (using a XBee module), elaborates them and adjusts the main engine, the steering servomotor and the two servos which move the X-Y axis of the onboard video camera.
Here are a image of the hardware and a video I recorderd and edited.
Concerning the part related to the user side, the project is the following.
Import programrover_pc
This project aims at hacking a remote controlled car by replacing the tx/rx and navigation systems. This project implements the pc side.
Last commit 12 Mar 2013 by 
Mario Bambagini
The communication protocol I exploited to make the two parts communicate each other is ssWi.
Import libraryssWi
A simple wireless protocol to let my examples communicate each other. ssWi stands for Shared Slotted Wireless protocol
Last commit 21 Apr 2020 by Mario Bambagini
Changes
| Revision | Date | Who | Commit message |
|---|---|---|---|
| 0:97d3a2b0ff58 | 2013-03-12 | mariob | rover project - car side; MB |