Diff: targets/hal/TARGET_Atmel/TARGET_SAM21/PeripheralNames.h

Revision:

613:bc40b8d2aec4

Parent:

612:fba1c7dc54c0

Child:

614:9d86c2ae5de0

--- a/targets/hal/TARGET_Atmel/TARGET_SAM21/PeripheralNames.h	Tue Aug 18 15:00:09 2015 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,156 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include <compiler.h>
-#include "cmsis.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define _SERCOM_SPI_NAME(n, unused) \
-                            SPI##n,
-
-#define _SERCOM_PAD_NAME(n, pad) \
-				SERCOM##n##_PAD##pad = ((n & 0xF) | ((pad & 0xF) << 4)),
-
-#define _SERCOM_I2C_NAME(n, unused) \
-                            I2C##n,
-
-
-
-typedef enum {
-    UART_0 = (int)0x42000800UL,  // Base address of SERCOM0
-    UART_1 = (int)0x42000C00UL,  // Base address of SERCOM1
-    UART_2 = (int)0x42001000UL,  // Base address of SERCOM2
-    UART_3 = (int)0x42001400UL,  // Base address of SERCOM3
-    UART_4 = (int)0x42001800UL,  // Base address of SERCOM4
-    UART_5 = (int)0x42001C00UL   // Base address of SERCOM5
-} UARTName;
-
-typedef enum { // for each input control mux  4,5,6,7,16,17,10,11 used in R21
-    ADC_4  =  0x4ul,
-    ADC_5  =  0x5ul,
-    ADC_6  =  0x6ul,
-    ADC_7  =  0x7ul,
-    ADC_10 =  0xAul,
-    ADC_11 =  0xBul,
-    ADC_16 =  0x10ul,
-    ADC_17 =  0x11ul
-} ADCName;
-
-typedef enum {  // for each channel
-    EXTINT_0 = 0,
-    EXTINT_1,
-    EXTINT_2,
-    EXTINT_3,
-    EXTINT_4,
-    EXTINT_5,
-    EXTINT_6,
-    EXTINT_7,
-    EXTINT_8,
-    EXTINT_9,
-    EXTINT_10,
-    EXTINT_11,
-    EXTINT_12,
-    EXTINT_13,
-    EXTINT_14,
-    EXTINT_15
-} EXTINTName;
-
-/*
-typedef enum {
-    DAC_0 = 0
-} DACName;*/
-
-typedef enum {
-    MREPEAT(SERCOM_INST_NUM, _SERCOM_SPI_NAME, ~)
-} SPIName;
-
-typedef enum {
-    MREPEAT(SERCOM_INST_NUM, _SERCOM_I2C_NAME, ~)
-} I2CName;
-
-typedef enum {
-    /* Pad 0 definitions */
-    MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 0)
-
-    /* Pad 1 definitions */
-    MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 1)
-
-    /* Pad 2 definitions */
-    MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 2)
-
-    /* Pad 3 definitions */
-    MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 3)
-} SercomPadName;
-/*
-typedef enum {
-    PWM_1 = 1,
-    PWM_2,
-    PWM_3,
-    PWM_4,
-    PWM_5,
-    PWM_6
-} PWMName;
-
-typedef enum {
-     CAN_1 = (int)LPC_CAN1_BASE,
-     CAN_2 = (int)LPC_CAN2_BASE
-} CANName;*/
-
-#define STDIO_UART_TX     USBTX
-#define STDIO_UART_RX     USBRX
-#define STDIO_UART        UART_0
-
-// Default peripherals
-#define MBED_SPI0         p5, p6, p7, p8
-#define MBED_SPI1         p11, p12, p13, p14
-
-#define MBED_UART0        p9, p10
-#define MBED_UART1        p13, p14
-#define MBED_UART2        p28, p27
-#define MBED_UARTUSB      USBTX, USBRX
-
-#define MBED_I2C0         p28, p27
-#define MBED_I2C1         p9, p10
-
-#define MBED_CAN0         p30, p29
-
-#define MBED_ANALOGOUT0   p18
-
-#define MBED_ANALOGIN0    p15
-#define MBED_ANALOGIN1    p16
-#define MBED_ANALOGIN2    p17
-#define MBED_ANALOGIN3    p18
-#define MBED_ANALOGIN4    p19
-#define MBED_ANALOGIN5    p20
-
-#define MBED_PWMOUT0      p26
-#define MBED_PWMOUT1      p25
-#define MBED_PWMOUT2      p24
-#define MBED_PWMOUT3      p23
-#define MBED_PWMOUT4      p22
-#define MBED_PWMOUT5      p21
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif