Mahesh Phalke
ADXXXX IIO Application
Evaluation Boards/Products Supported
EVAL-AD70081z_ARDZ
Overview
This is a IIO based firmware application to evalute the AD70081z device.
This code was developed and tested on SDP-K1 and ADuCM410 controller boards.
Use of Mbed platform allows code to port on other Mbed supported target boards with little or no modifications.
Communication Protocol: SPI
Hardware Setup
Required: SDP-K1 (or alternative Mbed enabled controller board), ADuCM410 Controller Board, EVAL-AD70081z board and USB cable.
Plug in the EVAL-AD70081z board on SDP-K1/ADuCM410 board using Arduino interface header
(refer software wiki page to identify suitable interface).
Connect SDP-K1/ADuCM410 board to the PC using the USB cable.
How to Get Started
Open Mbed online compiler. https://ide.mbed.com/compiler
Instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html
Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed
instructions here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html
For ADuCM410, refer software user guide.
Open IIO Oscilloscope (or alternative GUI), select 230400 baud rate, and the applicable COM
port to see the list of options.
Notes
If using Win 7, install serial drivers for Mbed. https://os.mbed.com/docs/mbed-os/v5.12/tutorials/windows-serial-driver.html
A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html.
Copyright (c) 2021 Analog Devices, Inc. All rights reserved.