Diff: targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/PeripheralPins.c

Revision:

414:4ec4c5b614b0

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/PeripheralPins.c	Tue Nov 25 07:15:09 2014 +0000
@@ -0,0 +1,212 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+//       If you change them, you will have also to modify the corresponding xxx_api.c file
+//       for pwmout, analogin, analogout, ...
+// =====
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+    {PA_0,  ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN1 - ARDUINO A0
+    {PA_1,  ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN2 - ARDUINO A1
+    {PA_2,  ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN3
+    {PA_3,  ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN4
+    {PA_4,  ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN1 - ARDUINO A2
+    {PA_5,  ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN2
+    {PA_6,  ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN3
+    {PA_7,  ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN4
+
+    {PB_0,  ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN11 - ARDUINO A3
+    {PB_1,  ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN12
+    {PB_2,  ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN12
+    {PB_12, ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN13
+    {PB_13, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN13
+    {PB_14, ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN14
+    {PB_15, ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN15
+
+    {PC_0,  ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN6 - ARDUINO A5
+    {PC_1,  ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN7 - ARDUINO A4
+    {PC_2,  ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN8
+    {PC_3,  ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC1_IN9
+    {PC_4,  ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN5
+    {PC_5,  ADC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC2_IN11
+    {NC,   NC,    0}
+};
+
+//*** DAC ***
+
+const PinMap PinMap_DAC[] = {
+    {PA_4, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC1_OUT1
+    {PA_5, DAC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC1_OUT2 (Warning: LED1 is also on this pin)
+    {PA_6, DAC_2, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // DAC2_OUT1
+    {NC,   NC,    0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+    {PA_14, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+    {PB_7,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+    {PB_9,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+    {NC,    NC,    0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+    {PA_15, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+    {PB_6,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+    {PB_8,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+    {NC,    NC,    0}
+};
+
+//*** PWM ***
+
+// TIM2 cannot be used because already used by the us_ticker
+const PinMap PinMap_PWM[] = {
+//  {PA_0,  PWM_2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)},   // TIM2_CH1
+//  {PA_1,  PWM_2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)},   // TIM2_CH2
+    {PA_1,  PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15)},  // TIM15_CH1N
+//  {PA_2,  PWM_2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)},   // TIM2_CH3
+    {PA_2,  PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15)},  // TIM15_CH1
+//  {PA_3,  PWM_2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)},   // TIM2_CH4
+    {PA_3,  PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15)},  // TIM15_CH2
+    {PA_4,  PWM_3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)},   // TIM3_CH2
+//  {PA_5,  PWM_2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)},   // TIM2_CH1
+    {PA_6,  PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16)},  // TIM16_CH1
+//  {PA_6,  PWM_3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)},   // TIM3_CH1
+    {PA_7,  PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17)},  // TIM17_CH1 - ARDUINO
+//  {PA_7,  PWM_3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)},   // TIM3_CH2 - ARDUINO
+//  {PA_7,  PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)},   // TIM1_CH1N - ARDUINO
+    {PA_8,  PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)},   // TIM1_CH1
+    {PA_9,  PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)},   // TIM1_CH2
+//  {PA_9,  PWM_2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2)},  // TIM2_CH3
+    {PA_10, PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)},   // TIM1_CH3
+//  {PA_10, PWM_2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2)},  // TIM2_CH4
+//  {PA_11, PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)},   // TIM1_CH1N
+    {PA_11, PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1)},  // TIM1_CH4
+    {PA_12, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16)},  // TIM16_CH1
+//  {PA_12, PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)},   // TIM1_CH2N
+    {PA_13, PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16)},  // TIM16_CH1N
+//  {PA_15, PWM_2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)},   // TIM2_CH1
+
+    {PB_0,  PWM_3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)},   // TIM3_CH3
+//  {PB_0,  PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)},   // TIM1_CH2N
+    {PB_1,  PWM_3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)},   // TIM3_CH4
+//  {PB_1,  PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)},   // TIM1_CH3N
+//  {PB_3,  PWM_2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)},   // TIM2_CH2 - ARDUINO --> USED BY TIMER
+    {PB_4,  PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16)},  // TIM16_CH1 - ARDUINO
+//  {PB_4,  PWM_3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)},   // TIM3_CH1 - ARDUINO
+//  {PB_5,  PWM_3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)},   // TIM3_CH2
+    {PB_5,  PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17)}, // TIM17_CH1
+    {PB_6,  PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16)},  // TIM16_CH1N - ARDUINO
+//  {PB_7,  PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17)},  // TIM17_CH1N
+    {PB_7,  PWM_3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM3)},  // TIM3_CH4
+    {PB_8,  PWM_16, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16)},  // TIM16_CH1
+    {PB_9,  PWM_17, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17)},  // TIM17_CH1
+//  {PB_10, PWM_2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)},   // TIM2_CH3 - ARDUINO --> USED BY TIMER
+//  {PB_11, PWM_2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2)},   // TIM2_CH4
+    {PB_13, PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)},   // TIM1_CH1N
+    {PB_14, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)},  // TIM15_CH1
+//  {PB_14, PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)},   // TIM1_CH2N
+    {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15)},  // TIM15_CH2
+//  {PB_15, PWM_15, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15)},  // TIM15_CH1N
+//  {PB_15, PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1)},   // TIM1_CH3N
+
+    {PC_0,  PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)},   // TIM1_CH1
+    {PC_1,  PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)},   // TIM1_CH2
+    {PC_2,  PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)},   // TIM1_CH3
+    {PC_3,  PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1)},   // TIM1_CH4
+    {PC_6,  PWM_3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)},   // TIM3_CH1
+    {PC_7,  PWM_3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)},   // TIM3_CH2 - ARDUINO
+    {PC_8,  PWM_3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)},   // TIM3_CH3
+    {PC_9,  PWM_3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3)},   // TIM3_CH4
+    {PC_13, PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1)},   // TIM1_CH1N
+
+    {PF_0,  PWM_1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1)},   // TIM1_CH3N
+    {NC,    NC,     0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+    {PA_2,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+    {PA_9,  UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+    {PA_14, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+    {PB_3,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+    {PB_6,  UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+    {PB_9,  UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+    {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+    {PC_4,  UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+    {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+    {NC,    NC,     0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+    {PA_3,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+    {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+    {PA_15, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+    {PB_4,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+    {PB_7,  UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+    {PB_8,  UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+    {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+    {PC_5,  UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+    {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+    {NC,    NC,     0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+    {PA_7,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+    {PB_5,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+    {NC,    NC,    0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+    {PA_6,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+    {PB_4,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+    {NC,    NC,    0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+    {PA_5,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+    {PB_3,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+    {NC,    NC,    0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+    {PA_4,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+    {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+    {NC,    NC,    0}
+};