lzbp li
SHIO
Fork of
mbed-stm32l0/l1-src
by 
lzbp li
Diff: api/SPISlave.h
- Revision:
- 13:0645d8841f51
- Parent:
- 10:3bc89ef62ce7
- Child:
- 552:a1b9575155a3
--- a/api/SPISlave.h Wed Jul 24 11:11:21 2013 +0100
+++ b/api/SPISlave.h Mon Aug 05 14:12:34 2013 +0300
@@ -1,126 +1,126 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_SPISLAVE_H
-#define MBED_SPISLAVE_H
-
-#include "platform.h"
-
-#if DEVICE_SPISLAVE
-
-#include "spi_api.h"
-
-namespace mbed {
-
-/** A SPI slave, used for communicating with a SPI Master device
- *
- * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz
- *
- * Example:
- * @code
- * // Reply to a SPI master as slave
- *
- * #include "mbed.h"
- *
- * SPISlave device(p5, p6, p7, p8); // mosi, miso, sclk, ssel
- *
- * int main() {
- * device.reply(0x00); // Prime SPI with first reply
- * while(1) {
- * if(device.receive()) {
- * int v = device.read(); // Read byte from master
- * v = (v + 1) % 0x100; // Add one to it, modulo 256
- * device.reply(v); // Make this the next reply
- * }
- * }
- * }
- * @endcode
- */
-class SPISlave {
-
-public:
-
- /** Create a SPI slave connected to the specified pins
- *
- * Pin Options:
- * (5, 6, 7i, 8) or (11, 12, 13, 14)
- *
- * mosi or miso can be specfied as NC if not used
- *
- * @param mosi SPI Master Out, Slave In pin
- * @param miso SPI Master In, Slave Out pin
- * @param sclk SPI Clock pin
- * @param ssel SPI chip select pin
- * @param name (optional) A string to identify the object
- */
- SPISlave(PinName mosi, PinName miso, PinName sclk, PinName ssel);
-
- /** Configure the data transmission format
- *
- * @param bits Number of bits per SPI frame (4 - 16)
- * @param mode Clock polarity and phase mode (0 - 3)
- *
- * @code
- * mode | POL PHA
- * -----+--------
- * 0 | 0 0
- * 1 | 0 1
- * 2 | 1 0
- * 3 | 1 1
- * @endcode
- */
- void format(int bits, int mode = 0);
-
- /** Set the spi bus clock frequency
- *
- * @param hz SCLK frequency in hz (default = 1MHz)
- */
- void frequency(int hz = 1000000);
-
- /** Polls the SPI to see if data has been received
- *
- * @returns
- * 0 if no data,
- * 1 otherwise
- */
- int receive(void);
-
- /** Retrieve data from receive buffer as slave
- *
- * @returns
- * the data in the receive buffer
- */
- int read(void);
-
- /** Fill the transmission buffer with the value to be written out
- * as slave on the next received message from the master.
- *
- * @param value the data to be transmitted next
- */
- void reply(int value);
-
-protected:
- spi_t _spi;
-
- int _bits;
- int _mode;
- int _hz;
-};
-
-} // namespace mbed
-
-#endif
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPISLAVE_H
+#define MBED_SPISLAVE_H
+
+#include "platform.h"
+
+#if DEVICE_SPISLAVE
+
+#include "spi_api.h"
+
+namespace mbed {
+
+/** A SPI slave, used for communicating with a SPI Master device
+ *
+ * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz
+ *
+ * Example:
+ * @code
+ * // Reply to a SPI master as slave
+ *
+ * #include "mbed.h"
+ *
+ * SPISlave device(p5, p6, p7, p8); // mosi, miso, sclk, ssel
+ *
+ * int main() {
+ * device.reply(0x00); // Prime SPI with first reply
+ * while(1) {
+ * if(device.receive()) {
+ * int v = device.read(); // Read byte from master
+ * v = (v + 1) % 0x100; // Add one to it, modulo 256
+ * device.reply(v); // Make this the next reply
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class SPISlave {
+
+public:
+
+ /** Create a SPI slave connected to the specified pins
+ *
+ * Pin Options:
+ * (5, 6, 7i, 8) or (11, 12, 13, 14)
+ *
+ * mosi or miso can be specfied as NC if not used
+ *
+ * @param mosi SPI Master Out, Slave In pin
+ * @param miso SPI Master In, Slave Out pin
+ * @param sclk SPI Clock pin
+ * @param ssel SPI chip select pin
+ * @param name (optional) A string to identify the object
+ */
+ SPISlave(PinName mosi, PinName miso, PinName sclk, PinName ssel);
+
+ /** Configure the data transmission format
+ *
+ * @param bits Number of bits per SPI frame (4 - 16)
+ * @param mode Clock polarity and phase mode (0 - 3)
+ *
+ * @code
+ * mode | POL PHA
+ * -----+--------
+ * 0 | 0 0
+ * 1 | 0 1
+ * 2 | 1 0
+ * 3 | 1 1
+ * @endcode
+ */
+ void format(int bits, int mode = 0);
+
+ /** Set the spi bus clock frequency
+ *
+ * @param hz SCLK frequency in hz (default = 1MHz)
+ */
+ void frequency(int hz = 1000000);
+
+ /** Polls the SPI to see if data has been received
+ *
+ * @returns
+ * 0 if no data,
+ * 1 otherwise
+ */
+ int receive(void);
+
+ /** Retrieve data from receive buffer as slave
+ *
+ * @returns
+ * the data in the receive buffer
+ */
+ int read(void);
+
+ /** Fill the transmission buffer with the value to be written out
+ * as slave on the next received message from the master.
+ *
+ * @param value the data to be transmitted next
+ */
+ void reply(int value);
+
+protected:
+ spi_t _spi;
+
+ int _bits;
+ int _mode;
+ int _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif