1276
Dependents: SX1276PingPong_RHF76-052_s
Fork of SX1276Lib by
sx1276.h
00001 /* 00002 / _____) _ | | 00003 ( (____ _____ ____ _| |_ _____ ____| |__ 00004 \____ \| ___ | (_ _) ___ |/ ___) _ \ 00005 _____) ) ____| | | || |_| ____( (___| | | | 00006 (______/|_____)_|_|_| \__)_____)\____)_| |_| 00007 (C) 2014 Semtech 00008 00009 Description: Actual implementation of a SX1276 radio, inherits Radio 00010 00011 License: Revised BSD License, see LICENSE.TXT file include in the project 00012 00013 Maintainers: Miguel Luis, Gregory Cristian and Nicolas Huguenin 00014 */ 00015 #ifndef __SX1276_H__ 00016 #define __SX1276_H__ 00017 00018 #include "radio.h" 00019 #include "./registers/sx1276Regs-Fsk.h" 00020 #include "./registers/sx1276Regs-LoRa.h" 00021 #include "./typedefs/typedefs.h" 00022 00023 /*! 00024 * Radio wakeup time from SLEEP mode 00025 */ 00026 #define RADIO_OSC_STARTUP 1000 // [us] 00027 00028 /*! 00029 * Radio PLL lock and Mode Ready delay which can vary with the temperature 00030 */ 00031 #define RADIO_SLEEP_TO_RX 2000 // [us] 00032 00033 /*! 00034 * Radio complete Wake-up Time with margin for temperature compensation 00035 */ 00036 #define RADIO_WAKEUP_TIME ( RADIO_OSC_STARTUP + RADIO_SLEEP_TO_RX ) 00037 00038 00039 /*! 00040 * SX1276 definitions 00041 */ 00042 #define XTAL_FREQ 32000000 00043 #define FREQ_STEP 61.03515625 00044 00045 #define RX_BUFFER_SIZE 256 00046 00047 /*! 00048 * Constant values need to compute the RSSI value 00049 */ 00050 #define RSSI_OFFSET_LF -164.0 00051 #define RSSI_OFFSET_HF -157.0 00052 00053 #define RF_MID_BAND_THRESH 525000000 00054 00055 /*! 00056 * Actual implementation of a SX1276 radio, inherits Radio 00057 */ 00058 class SX1276 : public Radio 00059 { 00060 protected: 00061 /*! 00062 * SPI Interface 00063 */ 00064 SPI spi ; // mosi, miso, sclk 00065 DigitalOut nss; 00066 00067 /*! 00068 * SX1276 Reset pin 00069 */ 00070 DigitalInOut reset ; 00071 00072 /*! 00073 * SX1276 DIO pins 00074 */ 00075 InterruptIn dio0 ; 00076 InterruptIn dio1; 00077 InterruptIn dio2; 00078 InterruptIn dio3; 00079 InterruptIn dio4; 00080 DigitalIn dio5; 00081 00082 bool isRadioActive; 00083 00084 uint8_t boardConnected; //1 = SX1276MB1LAS; 0 = SX1276MB1MAS 00085 00086 uint8_t *rxtxBuffer; 00087 00088 uint8_t currentOpMode; 00089 00090 /*! 00091 * Hardware DIO IRQ functions 00092 */ 00093 DioIrqHandler *dioIrq ; 00094 00095 /*! 00096 * Tx and Rx timers 00097 */ 00098 Timeout txTimeoutTimer ; 00099 Timeout rxTimeoutTimer; 00100 Timeout rxTimeoutSyncWord; 00101 00102 /*! 00103 * rxTx: [1: Tx, 0: Rx] 00104 */ 00105 uint8_t rxTx ; 00106 00107 RadioSettings_t settings; 00108 00109 static const FskBandwidth_t FskBandwidths[] ; 00110 protected: 00111 00112 /*! 00113 * Performs the Rx chain calibration for LF and HF bands 00114 * \remark Must be called just after the reset so all registers are at their 00115 * default values 00116 */ 00117 void RxChainCalibration ( void ); 00118 00119 public: 00120 SX1276 ( RadioEvents_t *events, 00121 PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset , 00122 PinName dio0 , PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5 ); 00123 SX1276 ( RadioEvents_t *events ); 00124 virtual ~SX1276 ( ); 00125 00126 //------------------------------------------------------------------------- 00127 // Redefined Radio functions 00128 //------------------------------------------------------------------------- 00129 /*! 00130 * @brief Initializes the radio 00131 * 00132 * @param [IN] events Structure containing the driver callback functions 00133 */ 00134 virtual void Init( RadioEvents_t *events ); 00135 /*! 00136 * Return current radio status 00137 * 00138 * @param status Radio status. [RF_IDLE, RX_RUNNING, TX_RUNNING] 00139 */ 00140 virtual RadioState GetStatus ( void ); 00141 00142 /*! 00143 * @brief Configures the SX1276 with the given modem 00144 * 00145 * @param [IN] modem Modem to be used [0: FSK, 1: LoRa] 00146 */ 00147 virtual void SetModem( RadioModems_t modem ); 00148 00149 /*! 00150 * @brief Sets the channel frequency 00151 * 00152 * @param [IN] freq Channel RF frequency 00153 */ 00154 virtual void SetChannel( uint32_t freq ); 00155 00156 /*! 00157 * @brief Sets the channels configuration 00158 * 00159 * @param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] 00160 * @param [IN] freq Channel RF frequency 00161 * @param [IN] rssiThresh RSSI threshold 00162 * 00163 * @retval isFree [true: Channel is free, false: Channel is not free] 00164 */ 00165 virtual bool IsChannelFree( RadioModems_t modem, uint32_t freq, int16_t rssiThresh ); 00166 00167 /*! 00168 * @brief Generates a 32 bits random value based on the RSSI readings 00169 * 00170 * \remark This function sets the radio in LoRa modem mode and disables 00171 * all interrupts. 00172 * After calling this function either Radio.SetRxConfig or 00173 * Radio.SetTxConfig functions must be called. 00174 * 00175 * @retval randomValue 32 bits random value 00176 */ 00177 virtual uint32_t Random( void ); 00178 00179 /*! 00180 * @brief Sets the reception parameters 00181 * 00182 * @param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] 00183 * @param [IN] bandwidth Sets the bandwidth 00184 * FSK : >= 2600 and <= 250000 Hz 00185 * LoRa: [0: 125 kHz, 1: 250 kHz, 00186 * 2: 500 kHz, 3: Reserved] 00187 * @param [IN] datarate Sets the Datarate 00188 * FSK : 600..300000 bits/s 00189 * LoRa: [6: 64, 7: 128, 8: 256, 9: 512, 00190 * 10: 1024, 11: 2048, 12: 4096 chips] 00191 * @param [IN] coderate Sets the coding rate ( LoRa only ) 00192 * FSK : N/A ( set to 0 ) 00193 * LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8] 00194 * @param [IN] bandwidthAfc Sets the AFC Bandwidth ( FSK only ) 00195 * FSK : >= 2600 and <= 250000 Hz 00196 * LoRa: N/A ( set to 0 ) 00197 * @param [IN] preambleLen Sets the Preamble length ( LoRa only ) 00198 * FSK : N/A ( set to 0 ) 00199 * LoRa: Length in symbols ( the hardware adds 4 more symbols ) 00200 * @param [IN] symbTimeout Sets the RxSingle timeout value ( LoRa only ) 00201 * FSK : N/A ( set to 0 ) 00202 * LoRa: timeout in symbols 00203 * @param [IN] fixLen Fixed length packets [0: variable, 1: fixed] 00204 * @param [IN] payloadLen Sets payload length when fixed lenght is used 00205 * @param [IN] crcOn Enables/Disables the CRC [0: OFF, 1: ON] 00206 * @param [IN] freqHopOn Enables disables the intra-packet frequency hopping [0: OFF, 1: ON] (LoRa only) 00207 * @param [IN] hopPeriod Number of symbols bewteen each hop (LoRa only) 00208 * @param [IN] iqInverted Inverts IQ signals ( LoRa only ) 00209 * FSK : N/A ( set to 0 ) 00210 * LoRa: [0: not inverted, 1: inverted] 00211 * @param [IN] rxContinuous Sets the reception in continuous mode 00212 * [false: single mode, true: continuous mode] 00213 */ 00214 virtual void SetRxConfig ( RadioModems_t modem, uint32_t bandwidth, 00215 uint32_t datarate, uint8_t coderate, 00216 uint32_t bandwidthAfc, uint16_t preambleLen, 00217 uint16_t symbTimeout, bool fixLen, 00218 uint8_t payloadLen, 00219 bool crcOn, bool freqHopOn, uint8_t hopPeriod, 00220 bool iqInverted, bool rxContinuous ); 00221 00222 /*! 00223 * @brief Sets the transmission parameters 00224 * 00225 * @param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] 00226 * @param [IN] power Sets the output power [dBm] 00227 * @param [IN] fdev Sets the frequency deviation ( FSK only ) 00228 * FSK : [Hz] 00229 * LoRa: 0 00230 * @param [IN] bandwidth Sets the bandwidth ( LoRa only ) 00231 * FSK : 0 00232 * LoRa: [0: 125 kHz, 1: 250 kHz, 00233 * 2: 500 kHz, 3: Reserved] 00234 * @param [IN] datarate Sets the Datarate 00235 * FSK : 600..300000 bits/s 00236 * LoRa: [6: 64, 7: 128, 8: 256, 9: 512, 00237 * 10: 1024, 11: 2048, 12: 4096 chips] 00238 * @param [IN] coderate Sets the coding rate ( LoRa only ) 00239 * FSK : N/A ( set to 0 ) 00240 * LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8] 00241 * @param [IN] preambleLen Sets the preamble length 00242 * @param [IN] fixLen Fixed length packets [0: variable, 1: fixed] 00243 * @param [IN] crcOn Enables disables the CRC [0: OFF, 1: ON] 00244 * @param [IN] freqHopOn Enables disables the intra-packet frequency hopping [0: OFF, 1: ON] (LoRa only) 00245 * @param [IN] hopPeriod Number of symbols bewteen each hop (LoRa only) 00246 * @param [IN] iqInverted Inverts IQ signals ( LoRa only ) 00247 * FSK : N/A ( set to 0 ) 00248 * LoRa: [0: not inverted, 1: inverted] 00249 * @param [IN] timeout Transmission timeout [us] 00250 */ 00251 virtual void SetTxConfig( RadioModems_t modem, int8_t power, uint32_t fdev, 00252 uint32_t bandwidth, uint32_t datarate, 00253 uint8_t coderate, uint16_t preambleLen, 00254 bool fixLen, bool crcOn, bool freqHopOn, 00255 uint8_t hopPeriod, bool iqInverted, uint32_t timeout ); 00256 00257 /*! 00258 * @brief Computes the packet time on air for the given payload 00259 * 00260 * \Remark Can only be called once SetRxConfig or SetTxConfig have been called 00261 * 00262 * @param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] 00263 * @param [IN] pktLen Packet payload length 00264 * 00265 * @retval airTime Computed airTime for the given packet payload length 00266 */ 00267 virtual double TimeOnAir ( RadioModems_t modem, uint8_t pktLen ); 00268 00269 /*! 00270 * @brief Sends the buffer of size. Prepares the packet to be sent and sets 00271 * the radio in transmission 00272 * 00273 * @param [IN]: buffer Buffer pointer 00274 * @param [IN]: size Buffer size 00275 */ 00276 virtual void Send( uint8_t *buffer, uint8_t size ); 00277 00278 /*! 00279 * @brief Sets the radio in sleep mode 00280 */ 00281 virtual void Sleep( void ); 00282 00283 /*! 00284 * @brief Sets the radio in standby mode 00285 */ 00286 virtual void Standby( void ); 00287 00288 /*! 00289 * @brief Sets the radio in reception mode for the given time 00290 * @param [IN] timeout Reception timeout [us] 00291 * [0: continuous, others timeout] 00292 */ 00293 virtual void Rx( uint32_t timeout ); 00294 00295 /*! 00296 * @brief Sets the radio in transmission mode for the given time 00297 * @param [IN] timeout Transmission timeout [us] 00298 * [0: continuous, others timeout] 00299 */ 00300 virtual void Tx( uint32_t timeout ); 00301 00302 /*! 00303 * @brief Start a Channel Activity Detection 00304 */ 00305 virtual void StartCad( void ); 00306 00307 /*! 00308 * @brief Reads the current RSSI value 00309 * 00310 * @retval rssiValue Current RSSI value in [dBm] 00311 */ 00312 virtual int16_t GetRssi ( RadioModems_t modem ); 00313 00314 /*! 00315 * @brief Writes the radio register at the specified address 00316 * 00317 * @param [IN]: addr Register address 00318 * @param [IN]: data New register value 00319 */ 00320 virtual void Write ( uint8_t addr, uint8_t data ) = 0; 00321 00322 /*! 00323 * @brief Reads the radio register at the specified address 00324 * 00325 * @param [IN]: addr Register address 00326 * @retval data Register value 00327 */ 00328 virtual uint8_t Read ( uint8_t addr ) = 0; 00329 00330 /*! 00331 * @brief Writes multiple radio registers starting at address 00332 * 00333 * @param [IN] addr First Radio register address 00334 * @param [IN] buffer Buffer containing the new register's values 00335 * @param [IN] size Number of registers to be written 00336 */ 00337 virtual void Write( uint8_t addr, uint8_t *buffer, uint8_t size ) = 0; 00338 00339 /*! 00340 * @brief Reads multiple radio registers starting at address 00341 * 00342 * @param [IN] addr First Radio register address 00343 * @param [OUT] buffer Buffer where to copy the registers data 00344 * @param [IN] size Number of registers to be read 00345 */ 00346 virtual void Read ( uint8_t addr, uint8_t *buffer, uint8_t size ) = 0; 00347 00348 /*! 00349 * @brief Writes the buffer contents to the SX1276 FIFO 00350 * 00351 * @param [IN] buffer Buffer containing data to be put on the FIFO. 00352 * @param [IN] size Number of bytes to be written to the FIFO 00353 */ 00354 virtual void WriteFifo( uint8_t *buffer, uint8_t size ) = 0; 00355 00356 /*! 00357 * @brief Reads the contents of the SX1276 FIFO 00358 * 00359 * @param [OUT] buffer Buffer where to copy the FIFO read data. 00360 * @param [IN] size Number of bytes to be read from the FIFO 00361 */ 00362 virtual void ReadFifo( uint8_t *buffer, uint8_t size ) = 0; 00363 /*! 00364 * @brief Resets the SX1276 00365 */ 00366 virtual void Reset( void ) = 0; 00367 00368 /*! 00369 * @brief Sets the maximum payload length. 00370 * 00371 * @param [IN] modem Radio modem to be used [0: FSK, 1: LoRa] 00372 * @param [IN] max Maximum payload length in bytes 00373 */ 00374 virtual void SetMaxPayloadLength( RadioModems_t modem, uint8_t max ); 00375 00376 //------------------------------------------------------------------------- 00377 // Board relative functions 00378 //------------------------------------------------------------------------- 00379 00380 protected: 00381 /*! 00382 * @brief Initializes the radio I/Os pins interface 00383 */ 00384 virtual void IoInit( void ) = 0; 00385 00386 /*! 00387 * @brief Initializes the radio registers 00388 */ 00389 virtual void RadioRegistersInit( ) = 0; 00390 00391 /*! 00392 * @brief Initializes the radio SPI 00393 */ 00394 virtual void SpiInit( void ) = 0; 00395 00396 /*! 00397 * @brief Initializes DIO IRQ handlers 00398 * 00399 * @param [IN] irqHandlers Array containing the IRQ callback functions 00400 */ 00401 virtual void IoIrqInit( DioIrqHandler *irqHandlers ) = 0; 00402 00403 /*! 00404 * @brief De-initializes the radio I/Os pins interface. 00405 * 00406 * \remark Useful when going in MCU lowpower modes 00407 */ 00408 virtual void IoDeInit( void ) = 0; 00409 00410 /*! 00411 * @brief Gets the board PA selection configuration 00412 * 00413 * @param [IN] channel Channel frequency in Hz 00414 * @retval PaSelect RegPaConfig PaSelect value 00415 */ 00416 virtual uint8_t GetPaSelect( uint32_t channel ) = 0; 00417 00418 /*! 00419 * @brief Set the RF Switch I/Os pins in Low Power mode 00420 * 00421 * @param [IN] status enable or disable 00422 */ 00423 virtual void SetAntSwLowPower( bool status ) = 0; 00424 00425 /*! 00426 * @brief Initializes the RF Switch I/Os pins interface 00427 */ 00428 virtual void AntSwInit( void ) = 0; 00429 00430 /*! 00431 * @brief De-initializes the RF Switch I/Os pins interface 00432 * 00433 * \remark Needed to decrease the power consumption in MCU lowpower modes 00434 */ 00435 virtual void AntSwDeInit( void ) = 0; 00436 00437 /*! 00438 * @brief Controls the antena switch if necessary. 00439 * 00440 * \remark see errata note 00441 * 00442 * @param [IN] rxTx [1: Tx, 0: Rx] 00443 */ 00444 virtual void SetAntSw( uint8_t rxTx ) = 0; 00445 00446 /*! 00447 * @brief Checks if the given RF frequency is supported by the hardware 00448 * 00449 * @param [IN] frequency RF frequency to be checked 00450 * @retval isSupported [true: supported, false: unsupported] 00451 */ 00452 virtual bool CheckRfFrequency( uint32_t frequency ) = 0; 00453 protected: 00454 00455 /*! 00456 * @brief Sets the SX1276 operating mode 00457 * 00458 * @param [IN] opMode New operating mode 00459 */ 00460 virtual void SetOpMode( uint8_t opMode ); 00461 00462 /* 00463 * SX1276 DIO IRQ callback functions prototype 00464 */ 00465 00466 /*! 00467 * @brief DIO 0 IRQ callback 00468 */ 00469 virtual void OnDio0Irq( void ); 00470 00471 /*! 00472 * @brief DIO 1 IRQ callback 00473 */ 00474 virtual void OnDio1Irq( void ); 00475 00476 /*! 00477 * @brief DIO 2 IRQ callback 00478 */ 00479 virtual void OnDio2Irq( void ); 00480 00481 /*! 00482 * @brief DIO 3 IRQ callback 00483 */ 00484 virtual void OnDio3Irq( void ); 00485 00486 /*! 00487 * @brief DIO 4 IRQ callback 00488 */ 00489 virtual void OnDio4Irq( void ); 00490 00491 /*! 00492 * @brief DIO 5 IRQ callback 00493 */ 00494 virtual void OnDio5Irq( void ); 00495 00496 /*! 00497 * @brief Tx & Rx timeout timer callback 00498 */ 00499 virtual void OnTimeoutIrq( void ); 00500 00501 /*! 00502 * Returns the known FSK bandwidth registers value 00503 * 00504 * \param [IN] bandwidth Bandwidth value in Hz 00505 * \retval regValue Bandwidth register value. 00506 */ 00507 static uint8_t GetFskBandwidthRegValue ( uint32_t bandwidth ); 00508 }; 00509 00510 #endif // __SX1276_H__
Generated on Tue Jul 12 2022 18:14:11 by 1.7.2