Initial commit
Diff: mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PinNames.h
- Revision:
- 0:bb348c97df44
diff -r 000000000000 -r bb348c97df44 mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PinNames.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PinNames.h Wed Sep 16 01:11:49 2020 +0000 @@ -0,0 +1,235 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" +#include "PinNamesTypes.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PA_0 = 0x00, + PA_1 = 0x01, + PA_2 = 0x02, + PA_3 = 0x03, + PA_4 = 0x04, + PA_5 = 0x05, + PA_6 = 0x06, + PA_7 = 0x07, + PA_8 = 0x08, + PA_9 = 0x09, + PA_10 = 0x0A, + PA_11 = 0x0B, + PA_12 = 0x0C, + PA_13 = 0x0D, + PA_14 = 0x0E, + PA_15 = 0x0F, + + PB_0 = 0x10, + PB_1 = 0x11, + PB_2 = 0x12, + PB_3 = 0x13, + PB_4 = 0x14, + PB_5 = 0x15, + PB_6 = 0x16, + PB_7 = 0x17, + PB_8 = 0x18, + PB_9 = 0x19, + PB_10 = 0x1A, + PB_12 = 0x1C, + PB_13 = 0x1D, + PB_14 = 0x1E, + PB_15 = 0x1F, + + PC_0 = 0x20, + PC_1 = 0x21, + PC_2 = 0x22, + PC_3 = 0x23, + PC_4 = 0x24, + PC_5 = 0x25, + PC_6 = 0x26, + PC_7 = 0x27, + PC_8 = 0x28, + PC_9 = 0x29, + PC_10 = 0x2A, + PC_11 = 0x2B, + PC_12 = 0x2C, + PC_13 = 0x2D, + PC_14 = 0x2E, + PC_15 = 0x2F, + + PD_2 = 0x32, + + PH_0 = 0x70, + PH_1 = 0x71, + + // ADC internal channels + ADC_TEMP = 0xF0, + ADC_VREF = 0xF1, + ADC_VBAT = 0xF2, + + // Generic signals namings + XBEE_DOUT = PA_2, + XBEE_DIN = PA_3, + XBEE_AD0 = PB_1, + XBEE_AD1 = PB_0, + XBEE_AD2 = PA_5, + XBEE_AD3 = PA_4, + XBEE_AD4 = PA_7, + XBEE_AD5 = PC_1, + XBEE_AD6 = PA_1, + XBEE_DIO0 = PB_1, + XBEE_DIO1 = PB_0, + XBEE_DIO2 = PA_5, + XBEE_DIO3 = PA_4, + XBEE_DIO4 = PA_7, + XBEE_DIO5 = PC_1, + XBEE_DIO6 = PA_1, + XBEE_DIO7 = PA_0, + XBEE_DO8 = PA_6, + XBEE_DI8 = PA_11, + XBEE_PWM0 = PA_8, + XBEE_PWM1 = PC_9, + XBEE_CTS = PA_0, + XBEE_RTS = PA_1, + XBEE_DTR = PA_11, + XBEE_RSSI = PA_8, + XBEE_SLEEPRQ = PA_11, + XBEE_ON_SLEEP = PC_13, + XBEE_ASSOCIATE = PC_1, + XBEE_USB_RES = PA_12, + + // needed for mbed to build tests + LED1 = PA_0, + LED2 = PA_0, + LED3 = PA_0, + LED4 = PA_0, + + // XBEE_DOUT/DIN, RS232 port on UDK board + SERIAL_TX = PA_2, + SERIAL_RX = PA_3, + + // DB_TX/RX, USB port on UDK board + DB_TX = PA_9, + DB_RX = PA_10, + USBTX = PA_9, + USBRX = PA_10, + + // Multiplexed with XBEE pins + I2C_SCL = PA_8, + I2C_SDA = PC_9, + SPI1_MOSI = PA_7, + SPI1_MISO = PA_6, + SPI1_SCK = PA_5, + SPI1_CS = PA_4, + + // SPI flash + SPI3_MOSI = PC_12, + SPI3_MISO = PC_11, + SPI3_SCK = PC_10, + SPI3_CS = PC_6, + FLASH_HOLD = PC_7, + FLASH_WP = PC_8, + + // LoRa + LORA_RESET = PC_0, + LORA_RXCTL = PC_2, + LORA_TXCTL = PC_3, + LORA_DIO0 = PB_5, + LORA_DIO1 = PB_6, + LORA_DIO2 = PB_7, + LORA_DIO3 = PB_8, + LORA_DIO4 = PB_9, + LORA_DIO5 = PB_10, + // LoRa/SPI2 + LORA_NSS = PB_12, + LORA_SCK = PB_13, + LORA_MISO = PB_14, + LORA_MOSI = PB_15, + + // UART pins + UART_TX = PA_2, + UART_RX = PA_3, + UART_CTS = PA_0, + UART_RTS = PA_1, + + // SPI pins + SPI_MOSI = PA_7, + SPI_MISO = PA_6, + SPI_SCK = PA_5, + SPI_NSS = PA_4, + + // UDK2 pins + A0 = PB_1, + A1 = PB_0, + A2 = PC_1, + D0 = PA_3, + D1 = PA_2, + D2 = PC_13, + D3 = PA_0, + D6 = PA_1, + D7 = PA_11, + D10 = PA_4, + D11 = PA_7, + D12 = PA_6, + D13 = PA_5, + D14 = PC_9, + D15 = PA_8, + + // mDot GPIO pins + GPIO0 = PB_1, + GPIO1 = PB_0, + GPIO2 = PA_5, + GPIO3 = PA_4, + GPIO4 = PA_1, + GPIO5 = PA_0, + GPIO6 = PA_7, + GPIO7 = PA_6, + ASSOCIATE = PC_1, + ON_SLEEP = PC_13, + SLEEPRQ = PA_11, + RSSI = PA_8, + JTAG_SWCLK = PA_14, + JTAG_SWIO = PA_13, + JTAG_NRST = PB_4, + JTAG_SWO = PB_3, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +#ifdef __cplusplus +} +#endif + +#endif