Initial commit
Diff: mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PinNames.h
- Revision:
- 0:bb348c97df44
diff -r 000000000000 -r bb348c97df44 mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PinNames.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PinNames.h Wed Sep 16 01:11:49 2020 +0000 @@ -0,0 +1,205 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" +#include "PinNamesTypes.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + // Not connected + NC = -1, + + PA_0 = 0x00, + PA_1 = 0x01, + PA_2 = 0x02, + PA_3 = 0x03, + PA_4 = 0x04, + PA_5 = 0x05, + PA_6 = 0x06, + PA_7 = 0x07, + PA_8 = 0x08, + PA_9 = 0x09, + PA_10 = 0x0A, + PA_11 = 0x0B, + PA_12 = 0x0C, + PA_13 = 0x0D, + PA_14 = 0x0E, + PA_15 = 0x0F, + + PB_0 = 0x10, + PB_1 = 0x11, + PB_2 = 0x12, + PB_3 = 0x13, + PB_4 = 0x14, + PB_5 = 0x15, + PB_6 = 0x16, + PB_7 = 0x17, + PB_8 = 0x18, + PB_9 = 0x19, + PB_10 = 0x1A, + PB_12 = 0x1C, + PB_13 = 0x1D, + PB_14 = 0x1E, + PB_15 = 0x1F, + + PC_0 = 0x20, + PC_1 = 0x21, + PC_2 = 0x22, + PC_3 = 0x23, + PC_4 = 0x24, + PC_5 = 0x25, + PC_6 = 0x26, + PC_7 = 0x27, + PC_8 = 0x28, + PC_9 = 0x29, + PC_10 = 0x2A, + PC_11 = 0x2B, + PC_12 = 0x2C, + PC_13 = 0x2D, + PC_14 = 0x2E, + PC_15 = 0x2F, + + PD_2 = 0x32, + + PH_0 = 0x70, + PH_1 = 0x71, + + // ADC internal channels + ADC_TEMP = 0xF0, + ADC_VREF = 0xF1, + ADC_VBAT = 0xF2, + + // Arduino connector namings + A0 = PC_2, + A1 = PC_0, + A2 = PC_4, + A3 = PB_0, + A4 = PC_1, + A5 = PC_9, + D0 = PA_3, + D1 = PA_2, + D2 = PB_15, + D3 = PA_0, + D4 = PA_7, + D5 = PA_9, + D6 = PA_1, + D7 = PA_8, + D8 = PB_1, + D9 = PB_13, + D10 = PC_8, + D11 = PB_5, + D12 = PA_6, + D13 = PA_5, + D14 = PB_9, + D15 = PB_8, + + // Generic signals namings + LED1 = D3, + LED2 = D3, + LED3 = D3, + LED4 = D3, + SERIAL_TX = D1, + SERIAL_RX = D0, + SERIAL_RTS = D3, + SERIAL_CTS = D6, + SERIAL_DCD = D4, + SERIAL_DSR = D5, + SERIAL_DTR = D7, + SERIAL_RI = D8, + USBTX = PB_6, + USBRX = PB_7, + RADIO_TX = PC_7, + RADIO_RX = PC_6, + RADIO_RTS = PB_10, + RADIO_CTS = PB_12, + RADIO_DCD = NC, + RADIO_DSR = NC, + RADIO_DTR = NC, + RADIO_RI = NC, + MDMPWRON = PC_13, // 3G_ONOFF DragonFly Design Guide, Page No. 16 + MDMTXD = RADIO_TX, // Transmit Data + MDMRXD = RADIO_RX, // Receive Data + MDMRTS = RADIO_RTS, // Request to Send + MDMCTS = RADIO_CTS, // Clear to Send + MDMDCD = RADIO_DCD, // Data Carrier Detect + MDMDSR = RADIO_DSR, // Data Set Ready + MDMDTR = RADIO_DTR, // Data Terminal Ready + MDMRI = RADIO_RI, // Ring Indicator + + WAKEUP = D3, + + // I2C1 and I2C3 are available on Arduino pins + I2C1_SCL = D15, + I2C1_SDA = D14, + I2C3_SCL = D7, + I2C3_SDA = A5, + + // legacy definitions + I2C_SCL = I2C1_SCL, + I2C_SDA = I2C1_SDA, + + // SPI1 and SPI2 are available on Arduino pins + SPI1_MOSI = D11, + SPI1_MISO = D12, + SPI1_SCK = D13, + SPI2_MOSI = D2, + SPI2_MISO = A0, + SPI2_SCK = D9, + + // SPI3 connects to flash part + SPI3_MOSI = PC_12, + SPI3_MISO = PC_11, + SPI3_SCK = PC_10, + + // legacy definitions + SPI_MOSI = SPI3_MOSI, + SPI_MISO = SPI3_MISO, + SPI_SCK = SPI3_SCK, + SPI_CS1 = PA_4, + SPI_CS2 = PB_14 + +} PinName; + +#define ACTIVE_HIGH_POLARITY 1 +#define ACTIVE_LOW_POLARITY 0 + +#define MDM_PIN_POLARITY ACTIVE_HIGH_POLARITY + + +#ifdef __cplusplus +} +#endif + +#endif