Initial commit
mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_ll_sdmmc.c@0:bb348c97df44, 2020-09-16 (annotated)
- Committer:
- lypinator
- Date:
- Wed Sep 16 01:11:49 2020 +0000
- Revision:
- 0:bb348c97df44
Added PWM
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
lypinator | 0:bb348c97df44 | 1 | /** |
lypinator | 0:bb348c97df44 | 2 | ****************************************************************************** |
lypinator | 0:bb348c97df44 | 3 | * @file stm32f4xx_ll_sdmmc.c |
lypinator | 0:bb348c97df44 | 4 | * @author MCD Application Team |
lypinator | 0:bb348c97df44 | 5 | * @brief SDMMC Low Layer HAL module driver. |
lypinator | 0:bb348c97df44 | 6 | * |
lypinator | 0:bb348c97df44 | 7 | * This file provides firmware functions to manage the following |
lypinator | 0:bb348c97df44 | 8 | * functionalities of the SDMMC peripheral: |
lypinator | 0:bb348c97df44 | 9 | * + Initialization/de-initialization functions |
lypinator | 0:bb348c97df44 | 10 | * + I/O operation functions |
lypinator | 0:bb348c97df44 | 11 | * + Peripheral Control functions |
lypinator | 0:bb348c97df44 | 12 | * + Peripheral State functions |
lypinator | 0:bb348c97df44 | 13 | * |
lypinator | 0:bb348c97df44 | 14 | @verbatim |
lypinator | 0:bb348c97df44 | 15 | ============================================================================== |
lypinator | 0:bb348c97df44 | 16 | ##### SDMMC peripheral features ##### |
lypinator | 0:bb348c97df44 | 17 | ============================================================================== |
lypinator | 0:bb348c97df44 | 18 | [..] The SD/SDMMC MMC card host interface (SDMMC) provides an interface between the APB2 |
lypinator | 0:bb348c97df44 | 19 | peripheral bus and MultiMedia cards (MMCs), SD memory cards, SDMMC cards and CE-ATA |
lypinator | 0:bb348c97df44 | 20 | devices. |
lypinator | 0:bb348c97df44 | 21 | |
lypinator | 0:bb348c97df44 | 22 | [..] The SDMMC features include the following: |
lypinator | 0:bb348c97df44 | 23 | (+) Full compliance with MultiMedia Card System Specification Version 4.2. Card support |
lypinator | 0:bb348c97df44 | 24 | for three different databus modes: 1-bit (default), 4-bit and 8-bit |
lypinator | 0:bb348c97df44 | 25 | (+) Full compatibility with previous versions of MultiMedia Cards (forward compatibility) |
lypinator | 0:bb348c97df44 | 26 | (+) Full compliance with SD Memory Card Specifications Version 2.0 |
lypinator | 0:bb348c97df44 | 27 | (+) Full compliance with SD I/O Card Specification Version 2.0: card support for two |
lypinator | 0:bb348c97df44 | 28 | different data bus modes: 1-bit (default) and 4-bit |
lypinator | 0:bb348c97df44 | 29 | (+) Full support of the CE-ATA features (full compliance with CE-ATA digital protocol |
lypinator | 0:bb348c97df44 | 30 | Rev1.1) |
lypinator | 0:bb348c97df44 | 31 | (+) Data transfer up to 48 MHz for the 8 bit mode |
lypinator | 0:bb348c97df44 | 32 | (+) Data and command output enable signals to control external bidirectional drivers. |
lypinator | 0:bb348c97df44 | 33 | |
lypinator | 0:bb348c97df44 | 34 | |
lypinator | 0:bb348c97df44 | 35 | ##### How to use this driver ##### |
lypinator | 0:bb348c97df44 | 36 | ============================================================================== |
lypinator | 0:bb348c97df44 | 37 | [..] |
lypinator | 0:bb348c97df44 | 38 | This driver is a considered as a driver of service for external devices drivers |
lypinator | 0:bb348c97df44 | 39 | that interfaces with the SDMMC peripheral. |
lypinator | 0:bb348c97df44 | 40 | According to the device used (SD card/ MMC card / SDMMC card ...), a set of APIs |
lypinator | 0:bb348c97df44 | 41 | is used in the device's driver to perform SDMMC operations and functionalities. |
lypinator | 0:bb348c97df44 | 42 | |
lypinator | 0:bb348c97df44 | 43 | This driver is almost transparent for the final user, it is only used to implement other |
lypinator | 0:bb348c97df44 | 44 | functionalities of the external device. |
lypinator | 0:bb348c97df44 | 45 | |
lypinator | 0:bb348c97df44 | 46 | [..] |
lypinator | 0:bb348c97df44 | 47 | (+) The SDMMC clock (SDMMCCLK = 48 MHz) is coming from a specific output of PLL |
lypinator | 0:bb348c97df44 | 48 | (PLL48CLK). Before start working with SDMMC peripheral make sure that the |
lypinator | 0:bb348c97df44 | 49 | PLL is well configured. |
lypinator | 0:bb348c97df44 | 50 | The SDMMC peripheral uses two clock signals: |
lypinator | 0:bb348c97df44 | 51 | (++) SDMMC adapter clock (SDMMCCLK = 48 MHz) |
lypinator | 0:bb348c97df44 | 52 | (++) APB2 bus clock (PCLK2) |
lypinator | 0:bb348c97df44 | 53 | |
lypinator | 0:bb348c97df44 | 54 | -@@- PCLK2 and SDMMC_CK clock frequencies must respect the following condition: |
lypinator | 0:bb348c97df44 | 55 | Frequency(PCLK2) >= (3 / 8 x Frequency(SDMMC_CK)) |
lypinator | 0:bb348c97df44 | 56 | |
lypinator | 0:bb348c97df44 | 57 | (+) Enable/Disable peripheral clock using RCC peripheral macros related to SDMMC |
lypinator | 0:bb348c97df44 | 58 | peripheral. |
lypinator | 0:bb348c97df44 | 59 | |
lypinator | 0:bb348c97df44 | 60 | (+) Enable the Power ON State using the SDIO_PowerState_ON(SDIOx) |
lypinator | 0:bb348c97df44 | 61 | function and disable it using the function SDIO_PowerState_ON(SDIOx). |
lypinator | 0:bb348c97df44 | 62 | |
lypinator | 0:bb348c97df44 | 63 | (+) Enable/Disable the clock using the __SDIO_ENABLE()/__SDIO_DISABLE() macros. |
lypinator | 0:bb348c97df44 | 64 | |
lypinator | 0:bb348c97df44 | 65 | (+) Enable/Disable the peripheral interrupts using the macros __SDIO_ENABLE_IT(hSDIO, IT) |
lypinator | 0:bb348c97df44 | 66 | and __SDIO_DISABLE_IT(hSDIO, IT) if you need to use interrupt mode. |
lypinator | 0:bb348c97df44 | 67 | |
lypinator | 0:bb348c97df44 | 68 | (+) When using the DMA mode |
lypinator | 0:bb348c97df44 | 69 | (++) Configure the DMA in the MSP layer of the external device |
lypinator | 0:bb348c97df44 | 70 | (++) Active the needed channel Request |
lypinator | 0:bb348c97df44 | 71 | (++) Enable the DMA using __SDIO_DMA_ENABLE() macro or Disable it using the macro |
lypinator | 0:bb348c97df44 | 72 | __SDIO_DMA_DISABLE(). |
lypinator | 0:bb348c97df44 | 73 | |
lypinator | 0:bb348c97df44 | 74 | (+) To control the CPSM (Command Path State Machine) and send |
lypinator | 0:bb348c97df44 | 75 | commands to the card use the SDIO_SendCommand(), |
lypinator | 0:bb348c97df44 | 76 | SDIO_GetCommandResponse() and SDIO_GetResponse() functions. First, user has |
lypinator | 0:bb348c97df44 | 77 | to fill the command structure (pointer to SDIO_CmdInitTypeDef) according |
lypinator | 0:bb348c97df44 | 78 | to the selected command to be sent. |
lypinator | 0:bb348c97df44 | 79 | The parameters that should be filled are: |
lypinator | 0:bb348c97df44 | 80 | (++) Command Argument |
lypinator | 0:bb348c97df44 | 81 | (++) Command Index |
lypinator | 0:bb348c97df44 | 82 | (++) Command Response type |
lypinator | 0:bb348c97df44 | 83 | (++) Command Wait |
lypinator | 0:bb348c97df44 | 84 | (++) CPSM Status (Enable or Disable). |
lypinator | 0:bb348c97df44 | 85 | |
lypinator | 0:bb348c97df44 | 86 | -@@- To check if the command is well received, read the SDIO_CMDRESP |
lypinator | 0:bb348c97df44 | 87 | register using the SDIO_GetCommandResponse(). |
lypinator | 0:bb348c97df44 | 88 | The SDMMC responses registers (SDIO_RESP1 to SDIO_RESP2), use the |
lypinator | 0:bb348c97df44 | 89 | SDIO_GetResponse() function. |
lypinator | 0:bb348c97df44 | 90 | |
lypinator | 0:bb348c97df44 | 91 | (+) To control the DPSM (Data Path State Machine) and send/receive |
lypinator | 0:bb348c97df44 | 92 | data to/from the card use the SDIO_ConfigData(), SDIO_GetDataCounter(), |
lypinator | 0:bb348c97df44 | 93 | SDIO_ReadFIFO(), SDIO_WriteFIFO() and SDIO_GetFIFOCount() functions. |
lypinator | 0:bb348c97df44 | 94 | |
lypinator | 0:bb348c97df44 | 95 | *** Read Operations *** |
lypinator | 0:bb348c97df44 | 96 | ======================= |
lypinator | 0:bb348c97df44 | 97 | [..] |
lypinator | 0:bb348c97df44 | 98 | (#) First, user has to fill the data structure (pointer to |
lypinator | 0:bb348c97df44 | 99 | SDIO_DataInitTypeDef) according to the selected data type to be received. |
lypinator | 0:bb348c97df44 | 100 | The parameters that should be filled are: |
lypinator | 0:bb348c97df44 | 101 | (++) Data TimeOut |
lypinator | 0:bb348c97df44 | 102 | (++) Data Length |
lypinator | 0:bb348c97df44 | 103 | (++) Data Block size |
lypinator | 0:bb348c97df44 | 104 | (++) Data Transfer direction: should be from card (To SDMMC) |
lypinator | 0:bb348c97df44 | 105 | (++) Data Transfer mode |
lypinator | 0:bb348c97df44 | 106 | (++) DPSM Status (Enable or Disable) |
lypinator | 0:bb348c97df44 | 107 | |
lypinator | 0:bb348c97df44 | 108 | (#) Configure the SDMMC resources to receive the data from the card |
lypinator | 0:bb348c97df44 | 109 | according to selected transfer mode (Refer to Step 8, 9 and 10). |
lypinator | 0:bb348c97df44 | 110 | |
lypinator | 0:bb348c97df44 | 111 | (#) Send the selected Read command (refer to step 11). |
lypinator | 0:bb348c97df44 | 112 | |
lypinator | 0:bb348c97df44 | 113 | (#) Use the SDIO flags/interrupts to check the transfer status. |
lypinator | 0:bb348c97df44 | 114 | |
lypinator | 0:bb348c97df44 | 115 | *** Write Operations *** |
lypinator | 0:bb348c97df44 | 116 | ======================== |
lypinator | 0:bb348c97df44 | 117 | [..] |
lypinator | 0:bb348c97df44 | 118 | (#) First, user has to fill the data structure (pointer to |
lypinator | 0:bb348c97df44 | 119 | SDIO_DataInitTypeDef) according to the selected data type to be received. |
lypinator | 0:bb348c97df44 | 120 | The parameters that should be filled are: |
lypinator | 0:bb348c97df44 | 121 | (++) Data TimeOut |
lypinator | 0:bb348c97df44 | 122 | (++) Data Length |
lypinator | 0:bb348c97df44 | 123 | (++) Data Block size |
lypinator | 0:bb348c97df44 | 124 | (++) Data Transfer direction: should be to card (To CARD) |
lypinator | 0:bb348c97df44 | 125 | (++) Data Transfer mode |
lypinator | 0:bb348c97df44 | 126 | (++) DPSM Status (Enable or Disable) |
lypinator | 0:bb348c97df44 | 127 | |
lypinator | 0:bb348c97df44 | 128 | (#) Configure the SDMMC resources to send the data to the card according to |
lypinator | 0:bb348c97df44 | 129 | selected transfer mode. |
lypinator | 0:bb348c97df44 | 130 | |
lypinator | 0:bb348c97df44 | 131 | (#) Send the selected Write command. |
lypinator | 0:bb348c97df44 | 132 | |
lypinator | 0:bb348c97df44 | 133 | (#) Use the SDIO flags/interrupts to check the transfer status. |
lypinator | 0:bb348c97df44 | 134 | |
lypinator | 0:bb348c97df44 | 135 | *** Command management operations *** |
lypinator | 0:bb348c97df44 | 136 | ===================================== |
lypinator | 0:bb348c97df44 | 137 | [..] |
lypinator | 0:bb348c97df44 | 138 | (#) The commands used for Read/Write/Erase operations are managed in |
lypinator | 0:bb348c97df44 | 139 | separate functions. |
lypinator | 0:bb348c97df44 | 140 | Each function allows to send the needed command with the related argument, |
lypinator | 0:bb348c97df44 | 141 | then check the response. |
lypinator | 0:bb348c97df44 | 142 | By the same approach, you could implement a command and check the response. |
lypinator | 0:bb348c97df44 | 143 | |
lypinator | 0:bb348c97df44 | 144 | @endverbatim |
lypinator | 0:bb348c97df44 | 145 | ****************************************************************************** |
lypinator | 0:bb348c97df44 | 146 | * @attention |
lypinator | 0:bb348c97df44 | 147 | * |
lypinator | 0:bb348c97df44 | 148 | * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> |
lypinator | 0:bb348c97df44 | 149 | * |
lypinator | 0:bb348c97df44 | 150 | * Redistribution and use in source and binary forms, with or without modification, |
lypinator | 0:bb348c97df44 | 151 | * are permitted provided that the following conditions are met: |
lypinator | 0:bb348c97df44 | 152 | * 1. Redistributions of source code must retain the above copyright notice, |
lypinator | 0:bb348c97df44 | 153 | * this list of conditions and the following disclaimer. |
lypinator | 0:bb348c97df44 | 154 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
lypinator | 0:bb348c97df44 | 155 | * this list of conditions and the following disclaimer in the documentation |
lypinator | 0:bb348c97df44 | 156 | * and/or other materials provided with the distribution. |
lypinator | 0:bb348c97df44 | 157 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
lypinator | 0:bb348c97df44 | 158 | * may be used to endorse or promote products derived from this software |
lypinator | 0:bb348c97df44 | 159 | * without specific prior written permission. |
lypinator | 0:bb348c97df44 | 160 | * |
lypinator | 0:bb348c97df44 | 161 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
lypinator | 0:bb348c97df44 | 162 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
lypinator | 0:bb348c97df44 | 163 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
lypinator | 0:bb348c97df44 | 164 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
lypinator | 0:bb348c97df44 | 165 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
lypinator | 0:bb348c97df44 | 166 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
lypinator | 0:bb348c97df44 | 167 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
lypinator | 0:bb348c97df44 | 168 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
lypinator | 0:bb348c97df44 | 169 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
lypinator | 0:bb348c97df44 | 170 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
lypinator | 0:bb348c97df44 | 171 | * |
lypinator | 0:bb348c97df44 | 172 | ****************************************************************************** |
lypinator | 0:bb348c97df44 | 173 | */ |
lypinator | 0:bb348c97df44 | 174 | |
lypinator | 0:bb348c97df44 | 175 | /* Includes ------------------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 176 | #include "stm32f4xx_hal.h" |
lypinator | 0:bb348c97df44 | 177 | |
lypinator | 0:bb348c97df44 | 178 | /** @addtogroup STM32F4xx_HAL_Driver |
lypinator | 0:bb348c97df44 | 179 | * @{ |
lypinator | 0:bb348c97df44 | 180 | */ |
lypinator | 0:bb348c97df44 | 181 | |
lypinator | 0:bb348c97df44 | 182 | /** @defgroup SDMMC_LL SDMMC Low Layer |
lypinator | 0:bb348c97df44 | 183 | * @brief Low layer module for SD |
lypinator | 0:bb348c97df44 | 184 | * @{ |
lypinator | 0:bb348c97df44 | 185 | */ |
lypinator | 0:bb348c97df44 | 186 | |
lypinator | 0:bb348c97df44 | 187 | #if defined(HAL_SD_MODULE_ENABLED) || defined(HAL_MMC_MODULE_ENABLED) |
lypinator | 0:bb348c97df44 | 188 | #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ |
lypinator | 0:bb348c97df44 | 189 | defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ |
lypinator | 0:bb348c97df44 | 190 | defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ |
lypinator | 0:bb348c97df44 | 191 | defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ |
lypinator | 0:bb348c97df44 | 192 | defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) |
lypinator | 0:bb348c97df44 | 193 | |
lypinator | 0:bb348c97df44 | 194 | /* Private typedef -----------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 195 | /* Private define ------------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 196 | /* Private macro -------------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 197 | /* Private variables ---------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 198 | /* Private function prototypes -----------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 199 | static uint32_t SDMMC_GetCmdError(SDIO_TypeDef *SDIOx); |
lypinator | 0:bb348c97df44 | 200 | static uint32_t SDMMC_GetCmdResp1(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint32_t Timeout); |
lypinator | 0:bb348c97df44 | 201 | static uint32_t SDMMC_GetCmdResp2(SDIO_TypeDef *SDIOx); |
lypinator | 0:bb348c97df44 | 202 | static uint32_t SDMMC_GetCmdResp3(SDIO_TypeDef *SDIOx); |
lypinator | 0:bb348c97df44 | 203 | static uint32_t SDMMC_GetCmdResp7(SDIO_TypeDef *SDIOx); |
lypinator | 0:bb348c97df44 | 204 | static uint32_t SDMMC_GetCmdResp6(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint16_t *pRCA); |
lypinator | 0:bb348c97df44 | 205 | |
lypinator | 0:bb348c97df44 | 206 | /* Exported functions --------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 207 | |
lypinator | 0:bb348c97df44 | 208 | /** @defgroup SDMMC_LL_Exported_Functions SDMMC Low Layer Exported Functions |
lypinator | 0:bb348c97df44 | 209 | * @{ |
lypinator | 0:bb348c97df44 | 210 | */ |
lypinator | 0:bb348c97df44 | 211 | |
lypinator | 0:bb348c97df44 | 212 | /** @defgroup HAL_SDMMC_LL_Group1 Initialization de-initialization functions |
lypinator | 0:bb348c97df44 | 213 | * @brief Initialization and Configuration functions |
lypinator | 0:bb348c97df44 | 214 | * |
lypinator | 0:bb348c97df44 | 215 | @verbatim |
lypinator | 0:bb348c97df44 | 216 | =============================================================================== |
lypinator | 0:bb348c97df44 | 217 | ##### Initialization/de-initialization functions ##### |
lypinator | 0:bb348c97df44 | 218 | =============================================================================== |
lypinator | 0:bb348c97df44 | 219 | [..] This section provides functions allowing to: |
lypinator | 0:bb348c97df44 | 220 | |
lypinator | 0:bb348c97df44 | 221 | @endverbatim |
lypinator | 0:bb348c97df44 | 222 | * @{ |
lypinator | 0:bb348c97df44 | 223 | */ |
lypinator | 0:bb348c97df44 | 224 | |
lypinator | 0:bb348c97df44 | 225 | /** |
lypinator | 0:bb348c97df44 | 226 | * @brief Initializes the SDMMC according to the specified |
lypinator | 0:bb348c97df44 | 227 | * parameters in the SDMMC_InitTypeDef and create the associated handle. |
lypinator | 0:bb348c97df44 | 228 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 229 | * @param Init SDMMC initialization structure |
lypinator | 0:bb348c97df44 | 230 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 231 | */ |
lypinator | 0:bb348c97df44 | 232 | HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init) |
lypinator | 0:bb348c97df44 | 233 | { |
lypinator | 0:bb348c97df44 | 234 | uint32_t tmpreg = 0U; |
lypinator | 0:bb348c97df44 | 235 | |
lypinator | 0:bb348c97df44 | 236 | /* Check the parameters */ |
lypinator | 0:bb348c97df44 | 237 | assert_param(IS_SDIO_ALL_INSTANCE(SDIOx)); |
lypinator | 0:bb348c97df44 | 238 | assert_param(IS_SDIO_CLOCK_EDGE(Init.ClockEdge)); |
lypinator | 0:bb348c97df44 | 239 | assert_param(IS_SDIO_CLOCK_BYPASS(Init.ClockBypass)); |
lypinator | 0:bb348c97df44 | 240 | assert_param(IS_SDIO_CLOCK_POWER_SAVE(Init.ClockPowerSave)); |
lypinator | 0:bb348c97df44 | 241 | assert_param(IS_SDIO_BUS_WIDE(Init.BusWide)); |
lypinator | 0:bb348c97df44 | 242 | assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(Init.HardwareFlowControl)); |
lypinator | 0:bb348c97df44 | 243 | assert_param(IS_SDIO_CLKDIV(Init.ClockDiv)); |
lypinator | 0:bb348c97df44 | 244 | |
lypinator | 0:bb348c97df44 | 245 | /* Set SDMMC configuration parameters */ |
lypinator | 0:bb348c97df44 | 246 | tmpreg |= (Init.ClockEdge |\ |
lypinator | 0:bb348c97df44 | 247 | Init.ClockBypass |\ |
lypinator | 0:bb348c97df44 | 248 | Init.ClockPowerSave |\ |
lypinator | 0:bb348c97df44 | 249 | Init.BusWide |\ |
lypinator | 0:bb348c97df44 | 250 | Init.HardwareFlowControl |\ |
lypinator | 0:bb348c97df44 | 251 | Init.ClockDiv |
lypinator | 0:bb348c97df44 | 252 | ); |
lypinator | 0:bb348c97df44 | 253 | |
lypinator | 0:bb348c97df44 | 254 | /* Write to SDMMC CLKCR */ |
lypinator | 0:bb348c97df44 | 255 | MODIFY_REG(SDIOx->CLKCR, CLKCR_CLEAR_MASK, tmpreg); |
lypinator | 0:bb348c97df44 | 256 | |
lypinator | 0:bb348c97df44 | 257 | return HAL_OK; |
lypinator | 0:bb348c97df44 | 258 | } |
lypinator | 0:bb348c97df44 | 259 | |
lypinator | 0:bb348c97df44 | 260 | |
lypinator | 0:bb348c97df44 | 261 | /** |
lypinator | 0:bb348c97df44 | 262 | * @} |
lypinator | 0:bb348c97df44 | 263 | */ |
lypinator | 0:bb348c97df44 | 264 | |
lypinator | 0:bb348c97df44 | 265 | /** @defgroup HAL_SDMMC_LL_Group2 IO operation functions |
lypinator | 0:bb348c97df44 | 266 | * @brief Data transfers functions |
lypinator | 0:bb348c97df44 | 267 | * |
lypinator | 0:bb348c97df44 | 268 | @verbatim |
lypinator | 0:bb348c97df44 | 269 | =============================================================================== |
lypinator | 0:bb348c97df44 | 270 | ##### I/O operation functions ##### |
lypinator | 0:bb348c97df44 | 271 | =============================================================================== |
lypinator | 0:bb348c97df44 | 272 | [..] |
lypinator | 0:bb348c97df44 | 273 | This subsection provides a set of functions allowing to manage the SDMMC data |
lypinator | 0:bb348c97df44 | 274 | transfers. |
lypinator | 0:bb348c97df44 | 275 | |
lypinator | 0:bb348c97df44 | 276 | @endverbatim |
lypinator | 0:bb348c97df44 | 277 | * @{ |
lypinator | 0:bb348c97df44 | 278 | */ |
lypinator | 0:bb348c97df44 | 279 | |
lypinator | 0:bb348c97df44 | 280 | /** |
lypinator | 0:bb348c97df44 | 281 | * @brief Read data (word) from Rx FIFO in blocking mode (polling) |
lypinator | 0:bb348c97df44 | 282 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 283 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 284 | */ |
lypinator | 0:bb348c97df44 | 285 | uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 286 | { |
lypinator | 0:bb348c97df44 | 287 | /* Read data from Rx FIFO */ |
lypinator | 0:bb348c97df44 | 288 | return (SDIOx->FIFO); |
lypinator | 0:bb348c97df44 | 289 | } |
lypinator | 0:bb348c97df44 | 290 | |
lypinator | 0:bb348c97df44 | 291 | /** |
lypinator | 0:bb348c97df44 | 292 | * @brief Write data (word) to Tx FIFO in blocking mode (polling) |
lypinator | 0:bb348c97df44 | 293 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 294 | * @param pWriteData pointer to data to write |
lypinator | 0:bb348c97df44 | 295 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 296 | */ |
lypinator | 0:bb348c97df44 | 297 | HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData) |
lypinator | 0:bb348c97df44 | 298 | { |
lypinator | 0:bb348c97df44 | 299 | /* Write data to FIFO */ |
lypinator | 0:bb348c97df44 | 300 | SDIOx->FIFO = *pWriteData; |
lypinator | 0:bb348c97df44 | 301 | |
lypinator | 0:bb348c97df44 | 302 | return HAL_OK; |
lypinator | 0:bb348c97df44 | 303 | } |
lypinator | 0:bb348c97df44 | 304 | |
lypinator | 0:bb348c97df44 | 305 | /** |
lypinator | 0:bb348c97df44 | 306 | * @} |
lypinator | 0:bb348c97df44 | 307 | */ |
lypinator | 0:bb348c97df44 | 308 | |
lypinator | 0:bb348c97df44 | 309 | /** @defgroup HAL_SDMMC_LL_Group3 Peripheral Control functions |
lypinator | 0:bb348c97df44 | 310 | * @brief management functions |
lypinator | 0:bb348c97df44 | 311 | * |
lypinator | 0:bb348c97df44 | 312 | @verbatim |
lypinator | 0:bb348c97df44 | 313 | =============================================================================== |
lypinator | 0:bb348c97df44 | 314 | ##### Peripheral Control functions ##### |
lypinator | 0:bb348c97df44 | 315 | =============================================================================== |
lypinator | 0:bb348c97df44 | 316 | [..] |
lypinator | 0:bb348c97df44 | 317 | This subsection provides a set of functions allowing to control the SDMMC data |
lypinator | 0:bb348c97df44 | 318 | transfers. |
lypinator | 0:bb348c97df44 | 319 | |
lypinator | 0:bb348c97df44 | 320 | @endverbatim |
lypinator | 0:bb348c97df44 | 321 | * @{ |
lypinator | 0:bb348c97df44 | 322 | */ |
lypinator | 0:bb348c97df44 | 323 | |
lypinator | 0:bb348c97df44 | 324 | /** |
lypinator | 0:bb348c97df44 | 325 | * @brief Set SDMMC Power state to ON. |
lypinator | 0:bb348c97df44 | 326 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 327 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 328 | */ |
lypinator | 0:bb348c97df44 | 329 | HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 330 | { |
lypinator | 0:bb348c97df44 | 331 | /* Set power state to ON */ |
lypinator | 0:bb348c97df44 | 332 | SDIOx->POWER = SDIO_POWER_PWRCTRL; |
lypinator | 0:bb348c97df44 | 333 | |
lypinator | 0:bb348c97df44 | 334 | return HAL_OK; |
lypinator | 0:bb348c97df44 | 335 | } |
lypinator | 0:bb348c97df44 | 336 | |
lypinator | 0:bb348c97df44 | 337 | /** |
lypinator | 0:bb348c97df44 | 338 | * @brief Set SDMMC Power state to OFF. |
lypinator | 0:bb348c97df44 | 339 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 340 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 341 | */ |
lypinator | 0:bb348c97df44 | 342 | HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 343 | { |
lypinator | 0:bb348c97df44 | 344 | /* Set power state to OFF */ |
lypinator | 0:bb348c97df44 | 345 | SDIOx->POWER = 0x00000000U; |
lypinator | 0:bb348c97df44 | 346 | |
lypinator | 0:bb348c97df44 | 347 | return HAL_OK; |
lypinator | 0:bb348c97df44 | 348 | } |
lypinator | 0:bb348c97df44 | 349 | |
lypinator | 0:bb348c97df44 | 350 | /** |
lypinator | 0:bb348c97df44 | 351 | * @brief Get SDMMC Power state. |
lypinator | 0:bb348c97df44 | 352 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 353 | * @retval Power status of the controller. The returned value can be one of the |
lypinator | 0:bb348c97df44 | 354 | * following values: |
lypinator | 0:bb348c97df44 | 355 | * - 0x00: Power OFF |
lypinator | 0:bb348c97df44 | 356 | * - 0x02: Power UP |
lypinator | 0:bb348c97df44 | 357 | * - 0x03: Power ON |
lypinator | 0:bb348c97df44 | 358 | */ |
lypinator | 0:bb348c97df44 | 359 | uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 360 | { |
lypinator | 0:bb348c97df44 | 361 | return (SDIOx->POWER & SDIO_POWER_PWRCTRL); |
lypinator | 0:bb348c97df44 | 362 | } |
lypinator | 0:bb348c97df44 | 363 | |
lypinator | 0:bb348c97df44 | 364 | /** |
lypinator | 0:bb348c97df44 | 365 | * @brief Configure the SDMMC command path according to the specified parameters in |
lypinator | 0:bb348c97df44 | 366 | * SDIO_CmdInitTypeDef structure and send the command |
lypinator | 0:bb348c97df44 | 367 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 368 | * @param Command pointer to a SDIO_CmdInitTypeDef structure that contains |
lypinator | 0:bb348c97df44 | 369 | * the configuration information for the SDMMC command |
lypinator | 0:bb348c97df44 | 370 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 371 | */ |
lypinator | 0:bb348c97df44 | 372 | HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *Command) |
lypinator | 0:bb348c97df44 | 373 | { |
lypinator | 0:bb348c97df44 | 374 | uint32_t tmpreg = 0U; |
lypinator | 0:bb348c97df44 | 375 | |
lypinator | 0:bb348c97df44 | 376 | /* Check the parameters */ |
lypinator | 0:bb348c97df44 | 377 | assert_param(IS_SDIO_CMD_INDEX(Command->CmdIndex)); |
lypinator | 0:bb348c97df44 | 378 | assert_param(IS_SDIO_RESPONSE(Command->Response)); |
lypinator | 0:bb348c97df44 | 379 | assert_param(IS_SDIO_WAIT(Command->WaitForInterrupt)); |
lypinator | 0:bb348c97df44 | 380 | assert_param(IS_SDIO_CPSM(Command->CPSM)); |
lypinator | 0:bb348c97df44 | 381 | |
lypinator | 0:bb348c97df44 | 382 | /* Set the SDMMC Argument value */ |
lypinator | 0:bb348c97df44 | 383 | SDIOx->ARG = Command->Argument; |
lypinator | 0:bb348c97df44 | 384 | |
lypinator | 0:bb348c97df44 | 385 | /* Set SDMMC command parameters */ |
lypinator | 0:bb348c97df44 | 386 | tmpreg |= (uint32_t)(Command->CmdIndex |\ |
lypinator | 0:bb348c97df44 | 387 | Command->Response |\ |
lypinator | 0:bb348c97df44 | 388 | Command->WaitForInterrupt |\ |
lypinator | 0:bb348c97df44 | 389 | Command->CPSM); |
lypinator | 0:bb348c97df44 | 390 | |
lypinator | 0:bb348c97df44 | 391 | /* Write to SDMMC CMD register */ |
lypinator | 0:bb348c97df44 | 392 | MODIFY_REG(SDIOx->CMD, CMD_CLEAR_MASK, tmpreg); |
lypinator | 0:bb348c97df44 | 393 | |
lypinator | 0:bb348c97df44 | 394 | return HAL_OK; |
lypinator | 0:bb348c97df44 | 395 | } |
lypinator | 0:bb348c97df44 | 396 | |
lypinator | 0:bb348c97df44 | 397 | /** |
lypinator | 0:bb348c97df44 | 398 | * @brief Return the command index of last command for which response received |
lypinator | 0:bb348c97df44 | 399 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 400 | * @retval Command index of the last command response received |
lypinator | 0:bb348c97df44 | 401 | */ |
lypinator | 0:bb348c97df44 | 402 | uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 403 | { |
lypinator | 0:bb348c97df44 | 404 | return (uint8_t)(SDIOx->RESPCMD); |
lypinator | 0:bb348c97df44 | 405 | } |
lypinator | 0:bb348c97df44 | 406 | |
lypinator | 0:bb348c97df44 | 407 | |
lypinator | 0:bb348c97df44 | 408 | /** |
lypinator | 0:bb348c97df44 | 409 | * @brief Return the response received from the card for the last command |
lypinator | 0:bb348c97df44 | 410 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 411 | * @param Response Specifies the SDMMC response register. |
lypinator | 0:bb348c97df44 | 412 | * This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 413 | * @arg SDIO_RESP1: Response Register 1 |
lypinator | 0:bb348c97df44 | 414 | * @arg SDIO_RESP1: Response Register 2 |
lypinator | 0:bb348c97df44 | 415 | * @arg SDIO_RESP1: Response Register 3 |
lypinator | 0:bb348c97df44 | 416 | * @arg SDIO_RESP1: Response Register 4 |
lypinator | 0:bb348c97df44 | 417 | * @retval The Corresponding response register value |
lypinator | 0:bb348c97df44 | 418 | */ |
lypinator | 0:bb348c97df44 | 419 | uint32_t SDIO_GetResponse(SDIO_TypeDef *SDIOx, uint32_t Response) |
lypinator | 0:bb348c97df44 | 420 | { |
lypinator | 0:bb348c97df44 | 421 | __IO uint32_t tmp = 0U; |
lypinator | 0:bb348c97df44 | 422 | |
lypinator | 0:bb348c97df44 | 423 | /* Check the parameters */ |
lypinator | 0:bb348c97df44 | 424 | assert_param(IS_SDIO_RESP(Response)); |
lypinator | 0:bb348c97df44 | 425 | |
lypinator | 0:bb348c97df44 | 426 | /* Get the response */ |
lypinator | 0:bb348c97df44 | 427 | tmp = (uint32_t)&(SDIOx->RESP1) + Response; |
lypinator | 0:bb348c97df44 | 428 | |
lypinator | 0:bb348c97df44 | 429 | return (*(__IO uint32_t *) tmp); |
lypinator | 0:bb348c97df44 | 430 | } |
lypinator | 0:bb348c97df44 | 431 | |
lypinator | 0:bb348c97df44 | 432 | /** |
lypinator | 0:bb348c97df44 | 433 | * @brief Configure the SDMMC data path according to the specified |
lypinator | 0:bb348c97df44 | 434 | * parameters in the SDIO_DataInitTypeDef. |
lypinator | 0:bb348c97df44 | 435 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 436 | * @param Data pointer to a SDIO_DataInitTypeDef structure |
lypinator | 0:bb348c97df44 | 437 | * that contains the configuration information for the SDMMC data. |
lypinator | 0:bb348c97df44 | 438 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 439 | */ |
lypinator | 0:bb348c97df44 | 440 | HAL_StatusTypeDef SDIO_ConfigData(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* Data) |
lypinator | 0:bb348c97df44 | 441 | { |
lypinator | 0:bb348c97df44 | 442 | uint32_t tmpreg = 0U; |
lypinator | 0:bb348c97df44 | 443 | |
lypinator | 0:bb348c97df44 | 444 | /* Check the parameters */ |
lypinator | 0:bb348c97df44 | 445 | assert_param(IS_SDIO_DATA_LENGTH(Data->DataLength)); |
lypinator | 0:bb348c97df44 | 446 | assert_param(IS_SDIO_BLOCK_SIZE(Data->DataBlockSize)); |
lypinator | 0:bb348c97df44 | 447 | assert_param(IS_SDIO_TRANSFER_DIR(Data->TransferDir)); |
lypinator | 0:bb348c97df44 | 448 | assert_param(IS_SDIO_TRANSFER_MODE(Data->TransferMode)); |
lypinator | 0:bb348c97df44 | 449 | assert_param(IS_SDIO_DPSM(Data->DPSM)); |
lypinator | 0:bb348c97df44 | 450 | |
lypinator | 0:bb348c97df44 | 451 | /* Set the SDMMC Data TimeOut value */ |
lypinator | 0:bb348c97df44 | 452 | SDIOx->DTIMER = Data->DataTimeOut; |
lypinator | 0:bb348c97df44 | 453 | |
lypinator | 0:bb348c97df44 | 454 | /* Set the SDMMC DataLength value */ |
lypinator | 0:bb348c97df44 | 455 | SDIOx->DLEN = Data->DataLength; |
lypinator | 0:bb348c97df44 | 456 | |
lypinator | 0:bb348c97df44 | 457 | /* Set the SDMMC data configuration parameters */ |
lypinator | 0:bb348c97df44 | 458 | tmpreg |= (uint32_t)(Data->DataBlockSize |\ |
lypinator | 0:bb348c97df44 | 459 | Data->TransferDir |\ |
lypinator | 0:bb348c97df44 | 460 | Data->TransferMode |\ |
lypinator | 0:bb348c97df44 | 461 | Data->DPSM); |
lypinator | 0:bb348c97df44 | 462 | |
lypinator | 0:bb348c97df44 | 463 | /* Write to SDMMC DCTRL */ |
lypinator | 0:bb348c97df44 | 464 | MODIFY_REG(SDIOx->DCTRL, DCTRL_CLEAR_MASK, tmpreg); |
lypinator | 0:bb348c97df44 | 465 | |
lypinator | 0:bb348c97df44 | 466 | return HAL_OK; |
lypinator | 0:bb348c97df44 | 467 | |
lypinator | 0:bb348c97df44 | 468 | } |
lypinator | 0:bb348c97df44 | 469 | |
lypinator | 0:bb348c97df44 | 470 | /** |
lypinator | 0:bb348c97df44 | 471 | * @brief Returns number of remaining data bytes to be transferred. |
lypinator | 0:bb348c97df44 | 472 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 473 | * @retval Number of remaining data bytes to be transferred |
lypinator | 0:bb348c97df44 | 474 | */ |
lypinator | 0:bb348c97df44 | 475 | uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 476 | { |
lypinator | 0:bb348c97df44 | 477 | return (SDIOx->DCOUNT); |
lypinator | 0:bb348c97df44 | 478 | } |
lypinator | 0:bb348c97df44 | 479 | |
lypinator | 0:bb348c97df44 | 480 | /** |
lypinator | 0:bb348c97df44 | 481 | * @brief Get the FIFO data |
lypinator | 0:bb348c97df44 | 482 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 483 | * @retval Data received |
lypinator | 0:bb348c97df44 | 484 | */ |
lypinator | 0:bb348c97df44 | 485 | uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 486 | { |
lypinator | 0:bb348c97df44 | 487 | return (SDIOx->FIFO); |
lypinator | 0:bb348c97df44 | 488 | } |
lypinator | 0:bb348c97df44 | 489 | |
lypinator | 0:bb348c97df44 | 490 | /** |
lypinator | 0:bb348c97df44 | 491 | * @brief Sets one of the two options of inserting read wait interval. |
lypinator | 0:bb348c97df44 | 492 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 493 | * @param SDIO_ReadWaitMode SDMMC Read Wait operation mode. |
lypinator | 0:bb348c97df44 | 494 | * This parameter can be: |
lypinator | 0:bb348c97df44 | 495 | * @arg SDIO_READ_WAIT_MODE_CLK: Read Wait control by stopping SDMMCCLK |
lypinator | 0:bb348c97df44 | 496 | * @arg SDIO_READ_WAIT_MODE_DATA2: Read Wait control using SDMMC_DATA2 |
lypinator | 0:bb348c97df44 | 497 | * @retval None |
lypinator | 0:bb348c97df44 | 498 | */ |
lypinator | 0:bb348c97df44 | 499 | HAL_StatusTypeDef SDIO_SetSDMMCReadWaitMode(SDIO_TypeDef *SDIOx, uint32_t SDIO_ReadWaitMode) |
lypinator | 0:bb348c97df44 | 500 | { |
lypinator | 0:bb348c97df44 | 501 | /* Check the parameters */ |
lypinator | 0:bb348c97df44 | 502 | assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode)); |
lypinator | 0:bb348c97df44 | 503 | |
lypinator | 0:bb348c97df44 | 504 | /* Set SDMMC read wait mode */ |
lypinator | 0:bb348c97df44 | 505 | MODIFY_REG(SDIOx->DCTRL, SDIO_DCTRL_RWMOD, SDIO_ReadWaitMode); |
lypinator | 0:bb348c97df44 | 506 | |
lypinator | 0:bb348c97df44 | 507 | return HAL_OK; |
lypinator | 0:bb348c97df44 | 508 | } |
lypinator | 0:bb348c97df44 | 509 | |
lypinator | 0:bb348c97df44 | 510 | /** |
lypinator | 0:bb348c97df44 | 511 | * @} |
lypinator | 0:bb348c97df44 | 512 | */ |
lypinator | 0:bb348c97df44 | 513 | |
lypinator | 0:bb348c97df44 | 514 | |
lypinator | 0:bb348c97df44 | 515 | /** @defgroup HAL_SDMMC_LL_Group4 Command management functions |
lypinator | 0:bb348c97df44 | 516 | * @brief Data transfers functions |
lypinator | 0:bb348c97df44 | 517 | * |
lypinator | 0:bb348c97df44 | 518 | @verbatim |
lypinator | 0:bb348c97df44 | 519 | =============================================================================== |
lypinator | 0:bb348c97df44 | 520 | ##### Commands management functions ##### |
lypinator | 0:bb348c97df44 | 521 | =============================================================================== |
lypinator | 0:bb348c97df44 | 522 | [..] |
lypinator | 0:bb348c97df44 | 523 | This subsection provides a set of functions allowing to manage the needed commands. |
lypinator | 0:bb348c97df44 | 524 | |
lypinator | 0:bb348c97df44 | 525 | @endverbatim |
lypinator | 0:bb348c97df44 | 526 | * @{ |
lypinator | 0:bb348c97df44 | 527 | */ |
lypinator | 0:bb348c97df44 | 528 | |
lypinator | 0:bb348c97df44 | 529 | /** |
lypinator | 0:bb348c97df44 | 530 | * @brief Send the Data Block Lenght command and check the response |
lypinator | 0:bb348c97df44 | 531 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 532 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 533 | */ |
lypinator | 0:bb348c97df44 | 534 | uint32_t SDMMC_CmdBlockLength(SDIO_TypeDef *SDIOx, uint32_t BlockSize) |
lypinator | 0:bb348c97df44 | 535 | { |
lypinator | 0:bb348c97df44 | 536 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 537 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 538 | |
lypinator | 0:bb348c97df44 | 539 | /* Set Block Size for Card */ |
lypinator | 0:bb348c97df44 | 540 | sdmmc_cmdinit.Argument = (uint32_t)BlockSize; |
lypinator | 0:bb348c97df44 | 541 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SET_BLOCKLEN; |
lypinator | 0:bb348c97df44 | 542 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 543 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 544 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 545 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 546 | |
lypinator | 0:bb348c97df44 | 547 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 548 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SET_BLOCKLEN, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 549 | |
lypinator | 0:bb348c97df44 | 550 | return errorstate; |
lypinator | 0:bb348c97df44 | 551 | } |
lypinator | 0:bb348c97df44 | 552 | |
lypinator | 0:bb348c97df44 | 553 | /** |
lypinator | 0:bb348c97df44 | 554 | * @brief Send the Read Single Block command and check the response |
lypinator | 0:bb348c97df44 | 555 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 556 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 557 | */ |
lypinator | 0:bb348c97df44 | 558 | uint32_t SDMMC_CmdReadSingleBlock(SDIO_TypeDef *SDIOx, uint32_t ReadAdd) |
lypinator | 0:bb348c97df44 | 559 | { |
lypinator | 0:bb348c97df44 | 560 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 561 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 562 | |
lypinator | 0:bb348c97df44 | 563 | /* Set Block Size for Card */ |
lypinator | 0:bb348c97df44 | 564 | sdmmc_cmdinit.Argument = (uint32_t)ReadAdd; |
lypinator | 0:bb348c97df44 | 565 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_READ_SINGLE_BLOCK; |
lypinator | 0:bb348c97df44 | 566 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 567 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 568 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 569 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 570 | |
lypinator | 0:bb348c97df44 | 571 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 572 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_READ_SINGLE_BLOCK, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 573 | |
lypinator | 0:bb348c97df44 | 574 | return errorstate; |
lypinator | 0:bb348c97df44 | 575 | } |
lypinator | 0:bb348c97df44 | 576 | |
lypinator | 0:bb348c97df44 | 577 | /** |
lypinator | 0:bb348c97df44 | 578 | * @brief Send the Read Multi Block command and check the response |
lypinator | 0:bb348c97df44 | 579 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 580 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 581 | */ |
lypinator | 0:bb348c97df44 | 582 | uint32_t SDMMC_CmdReadMultiBlock(SDIO_TypeDef *SDIOx, uint32_t ReadAdd) |
lypinator | 0:bb348c97df44 | 583 | { |
lypinator | 0:bb348c97df44 | 584 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 585 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 586 | |
lypinator | 0:bb348c97df44 | 587 | /* Set Block Size for Card */ |
lypinator | 0:bb348c97df44 | 588 | sdmmc_cmdinit.Argument = (uint32_t)ReadAdd; |
lypinator | 0:bb348c97df44 | 589 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_READ_MULT_BLOCK; |
lypinator | 0:bb348c97df44 | 590 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 591 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 592 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 593 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 594 | |
lypinator | 0:bb348c97df44 | 595 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 596 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_READ_MULT_BLOCK, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 597 | |
lypinator | 0:bb348c97df44 | 598 | return errorstate; |
lypinator | 0:bb348c97df44 | 599 | } |
lypinator | 0:bb348c97df44 | 600 | |
lypinator | 0:bb348c97df44 | 601 | /** |
lypinator | 0:bb348c97df44 | 602 | * @brief Send the Write Single Block command and check the response |
lypinator | 0:bb348c97df44 | 603 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 604 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 605 | */ |
lypinator | 0:bb348c97df44 | 606 | uint32_t SDMMC_CmdWriteSingleBlock(SDIO_TypeDef *SDIOx, uint32_t WriteAdd) |
lypinator | 0:bb348c97df44 | 607 | { |
lypinator | 0:bb348c97df44 | 608 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 609 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 610 | |
lypinator | 0:bb348c97df44 | 611 | /* Set Block Size for Card */ |
lypinator | 0:bb348c97df44 | 612 | sdmmc_cmdinit.Argument = (uint32_t)WriteAdd; |
lypinator | 0:bb348c97df44 | 613 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_WRITE_SINGLE_BLOCK; |
lypinator | 0:bb348c97df44 | 614 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 615 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 616 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 617 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 618 | |
lypinator | 0:bb348c97df44 | 619 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 620 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_WRITE_SINGLE_BLOCK, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 621 | |
lypinator | 0:bb348c97df44 | 622 | return errorstate; |
lypinator | 0:bb348c97df44 | 623 | } |
lypinator | 0:bb348c97df44 | 624 | |
lypinator | 0:bb348c97df44 | 625 | /** |
lypinator | 0:bb348c97df44 | 626 | * @brief Send the Write Multi Block command and check the response |
lypinator | 0:bb348c97df44 | 627 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 628 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 629 | */ |
lypinator | 0:bb348c97df44 | 630 | uint32_t SDMMC_CmdWriteMultiBlock(SDIO_TypeDef *SDIOx, uint32_t WriteAdd) |
lypinator | 0:bb348c97df44 | 631 | { |
lypinator | 0:bb348c97df44 | 632 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 633 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 634 | |
lypinator | 0:bb348c97df44 | 635 | /* Set Block Size for Card */ |
lypinator | 0:bb348c97df44 | 636 | sdmmc_cmdinit.Argument = (uint32_t)WriteAdd; |
lypinator | 0:bb348c97df44 | 637 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_WRITE_MULT_BLOCK; |
lypinator | 0:bb348c97df44 | 638 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 639 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 640 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 641 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 642 | |
lypinator | 0:bb348c97df44 | 643 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 644 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_WRITE_MULT_BLOCK, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 645 | |
lypinator | 0:bb348c97df44 | 646 | return errorstate; |
lypinator | 0:bb348c97df44 | 647 | } |
lypinator | 0:bb348c97df44 | 648 | |
lypinator | 0:bb348c97df44 | 649 | /** |
lypinator | 0:bb348c97df44 | 650 | * @brief Send the Start Address Erase command for SD and check the response |
lypinator | 0:bb348c97df44 | 651 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 652 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 653 | */ |
lypinator | 0:bb348c97df44 | 654 | uint32_t SDMMC_CmdSDEraseStartAdd(SDIO_TypeDef *SDIOx, uint32_t StartAdd) |
lypinator | 0:bb348c97df44 | 655 | { |
lypinator | 0:bb348c97df44 | 656 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 657 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 658 | |
lypinator | 0:bb348c97df44 | 659 | /* Set Block Size for Card */ |
lypinator | 0:bb348c97df44 | 660 | sdmmc_cmdinit.Argument = (uint32_t)StartAdd; |
lypinator | 0:bb348c97df44 | 661 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_ERASE_GRP_START; |
lypinator | 0:bb348c97df44 | 662 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 663 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 664 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 665 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 666 | |
lypinator | 0:bb348c97df44 | 667 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 668 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SD_ERASE_GRP_START, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 669 | |
lypinator | 0:bb348c97df44 | 670 | return errorstate; |
lypinator | 0:bb348c97df44 | 671 | } |
lypinator | 0:bb348c97df44 | 672 | |
lypinator | 0:bb348c97df44 | 673 | /** |
lypinator | 0:bb348c97df44 | 674 | * @brief Send the End Address Erase command for SD and check the response |
lypinator | 0:bb348c97df44 | 675 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 676 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 677 | */ |
lypinator | 0:bb348c97df44 | 678 | uint32_t SDMMC_CmdSDEraseEndAdd(SDIO_TypeDef *SDIOx, uint32_t EndAdd) |
lypinator | 0:bb348c97df44 | 679 | { |
lypinator | 0:bb348c97df44 | 680 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 681 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 682 | |
lypinator | 0:bb348c97df44 | 683 | /* Set Block Size for Card */ |
lypinator | 0:bb348c97df44 | 684 | sdmmc_cmdinit.Argument = (uint32_t)EndAdd; |
lypinator | 0:bb348c97df44 | 685 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_ERASE_GRP_END; |
lypinator | 0:bb348c97df44 | 686 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 687 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 688 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 689 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 690 | |
lypinator | 0:bb348c97df44 | 691 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 692 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SD_ERASE_GRP_END, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 693 | |
lypinator | 0:bb348c97df44 | 694 | return errorstate; |
lypinator | 0:bb348c97df44 | 695 | } |
lypinator | 0:bb348c97df44 | 696 | |
lypinator | 0:bb348c97df44 | 697 | /** |
lypinator | 0:bb348c97df44 | 698 | * @brief Send the Start Address Erase command and check the response |
lypinator | 0:bb348c97df44 | 699 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 700 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 701 | */ |
lypinator | 0:bb348c97df44 | 702 | uint32_t SDMMC_CmdEraseStartAdd(SDIO_TypeDef *SDIOx, uint32_t StartAdd) |
lypinator | 0:bb348c97df44 | 703 | { |
lypinator | 0:bb348c97df44 | 704 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 705 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 706 | |
lypinator | 0:bb348c97df44 | 707 | /* Set Block Size for Card */ |
lypinator | 0:bb348c97df44 | 708 | sdmmc_cmdinit.Argument = (uint32_t)StartAdd; |
lypinator | 0:bb348c97df44 | 709 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ERASE_GRP_START; |
lypinator | 0:bb348c97df44 | 710 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 711 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 712 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 713 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 714 | |
lypinator | 0:bb348c97df44 | 715 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 716 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_ERASE_GRP_START, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 717 | |
lypinator | 0:bb348c97df44 | 718 | return errorstate; |
lypinator | 0:bb348c97df44 | 719 | } |
lypinator | 0:bb348c97df44 | 720 | |
lypinator | 0:bb348c97df44 | 721 | /** |
lypinator | 0:bb348c97df44 | 722 | * @brief Send the End Address Erase command and check the response |
lypinator | 0:bb348c97df44 | 723 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 724 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 725 | */ |
lypinator | 0:bb348c97df44 | 726 | uint32_t SDMMC_CmdEraseEndAdd(SDIO_TypeDef *SDIOx, uint32_t EndAdd) |
lypinator | 0:bb348c97df44 | 727 | { |
lypinator | 0:bb348c97df44 | 728 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 729 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 730 | |
lypinator | 0:bb348c97df44 | 731 | /* Set Block Size for Card */ |
lypinator | 0:bb348c97df44 | 732 | sdmmc_cmdinit.Argument = (uint32_t)EndAdd; |
lypinator | 0:bb348c97df44 | 733 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ERASE_GRP_END; |
lypinator | 0:bb348c97df44 | 734 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 735 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 736 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 737 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 738 | |
lypinator | 0:bb348c97df44 | 739 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 740 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_ERASE_GRP_END, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 741 | |
lypinator | 0:bb348c97df44 | 742 | return errorstate; |
lypinator | 0:bb348c97df44 | 743 | } |
lypinator | 0:bb348c97df44 | 744 | |
lypinator | 0:bb348c97df44 | 745 | /** |
lypinator | 0:bb348c97df44 | 746 | * @brief Send the Erase command and check the response |
lypinator | 0:bb348c97df44 | 747 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 748 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 749 | */ |
lypinator | 0:bb348c97df44 | 750 | uint32_t SDMMC_CmdErase(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 751 | { |
lypinator | 0:bb348c97df44 | 752 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 753 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 754 | |
lypinator | 0:bb348c97df44 | 755 | /* Set Block Size for Card */ |
lypinator | 0:bb348c97df44 | 756 | sdmmc_cmdinit.Argument = 0U; |
lypinator | 0:bb348c97df44 | 757 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ERASE; |
lypinator | 0:bb348c97df44 | 758 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 759 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 760 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 761 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 762 | |
lypinator | 0:bb348c97df44 | 763 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 764 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_ERASE, SDIO_MAXERASETIMEOUT); |
lypinator | 0:bb348c97df44 | 765 | |
lypinator | 0:bb348c97df44 | 766 | return errorstate; |
lypinator | 0:bb348c97df44 | 767 | } |
lypinator | 0:bb348c97df44 | 768 | |
lypinator | 0:bb348c97df44 | 769 | /** |
lypinator | 0:bb348c97df44 | 770 | * @brief Send the Stop Transfer command and check the response. |
lypinator | 0:bb348c97df44 | 771 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 772 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 773 | */ |
lypinator | 0:bb348c97df44 | 774 | uint32_t SDMMC_CmdStopTransfer(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 775 | { |
lypinator | 0:bb348c97df44 | 776 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 777 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 778 | |
lypinator | 0:bb348c97df44 | 779 | /* Send CMD12 STOP_TRANSMISSION */ |
lypinator | 0:bb348c97df44 | 780 | sdmmc_cmdinit.Argument = 0U; |
lypinator | 0:bb348c97df44 | 781 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_STOP_TRANSMISSION; |
lypinator | 0:bb348c97df44 | 782 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 783 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 784 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 785 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 786 | |
lypinator | 0:bb348c97df44 | 787 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 788 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_STOP_TRANSMISSION, 100000000U); |
lypinator | 0:bb348c97df44 | 789 | |
lypinator | 0:bb348c97df44 | 790 | return errorstate; |
lypinator | 0:bb348c97df44 | 791 | } |
lypinator | 0:bb348c97df44 | 792 | |
lypinator | 0:bb348c97df44 | 793 | /** |
lypinator | 0:bb348c97df44 | 794 | * @brief Send the Select Deselect command and check the response. |
lypinator | 0:bb348c97df44 | 795 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 796 | * @param addr Address of the card to be selected |
lypinator | 0:bb348c97df44 | 797 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 798 | */ |
lypinator | 0:bb348c97df44 | 799 | uint32_t SDMMC_CmdSelDesel(SDIO_TypeDef *SDIOx, uint64_t Addr) |
lypinator | 0:bb348c97df44 | 800 | { |
lypinator | 0:bb348c97df44 | 801 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 802 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 803 | |
lypinator | 0:bb348c97df44 | 804 | /* Send CMD7 SDMMC_SEL_DESEL_CARD */ |
lypinator | 0:bb348c97df44 | 805 | sdmmc_cmdinit.Argument = (uint32_t)Addr; |
lypinator | 0:bb348c97df44 | 806 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEL_DESEL_CARD; |
lypinator | 0:bb348c97df44 | 807 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 808 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 809 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 810 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 811 | |
lypinator | 0:bb348c97df44 | 812 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 813 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SEL_DESEL_CARD, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 814 | |
lypinator | 0:bb348c97df44 | 815 | return errorstate; |
lypinator | 0:bb348c97df44 | 816 | } |
lypinator | 0:bb348c97df44 | 817 | |
lypinator | 0:bb348c97df44 | 818 | /** |
lypinator | 0:bb348c97df44 | 819 | * @brief Send the Go Idle State command and check the response. |
lypinator | 0:bb348c97df44 | 820 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 821 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 822 | */ |
lypinator | 0:bb348c97df44 | 823 | uint32_t SDMMC_CmdGoIdleState(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 824 | { |
lypinator | 0:bb348c97df44 | 825 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 826 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 827 | |
lypinator | 0:bb348c97df44 | 828 | sdmmc_cmdinit.Argument = 0U; |
lypinator | 0:bb348c97df44 | 829 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_GO_IDLE_STATE; |
lypinator | 0:bb348c97df44 | 830 | sdmmc_cmdinit.Response = SDIO_RESPONSE_NO; |
lypinator | 0:bb348c97df44 | 831 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 832 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 833 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 834 | |
lypinator | 0:bb348c97df44 | 835 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 836 | errorstate = SDMMC_GetCmdError(SDIOx); |
lypinator | 0:bb348c97df44 | 837 | |
lypinator | 0:bb348c97df44 | 838 | return errorstate; |
lypinator | 0:bb348c97df44 | 839 | } |
lypinator | 0:bb348c97df44 | 840 | |
lypinator | 0:bb348c97df44 | 841 | /** |
lypinator | 0:bb348c97df44 | 842 | * @brief Send the Operating Condition command and check the response. |
lypinator | 0:bb348c97df44 | 843 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 844 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 845 | */ |
lypinator | 0:bb348c97df44 | 846 | uint32_t SDMMC_CmdOperCond(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 847 | { |
lypinator | 0:bb348c97df44 | 848 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 849 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 850 | |
lypinator | 0:bb348c97df44 | 851 | /* Send CMD8 to verify SD card interface operating condition */ |
lypinator | 0:bb348c97df44 | 852 | /* Argument: - [31:12]: Reserved (shall be set to '0') |
lypinator | 0:bb348c97df44 | 853 | - [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V) |
lypinator | 0:bb348c97df44 | 854 | - [7:0]: Check Pattern (recommended 0xAA) */ |
lypinator | 0:bb348c97df44 | 855 | /* CMD Response: R7 */ |
lypinator | 0:bb348c97df44 | 856 | sdmmc_cmdinit.Argument = SDMMC_CHECK_PATTERN; |
lypinator | 0:bb348c97df44 | 857 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_HS_SEND_EXT_CSD; |
lypinator | 0:bb348c97df44 | 858 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 859 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 860 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 861 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 862 | |
lypinator | 0:bb348c97df44 | 863 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 864 | errorstate = SDMMC_GetCmdResp7(SDIOx); |
lypinator | 0:bb348c97df44 | 865 | |
lypinator | 0:bb348c97df44 | 866 | return errorstate; |
lypinator | 0:bb348c97df44 | 867 | } |
lypinator | 0:bb348c97df44 | 868 | |
lypinator | 0:bb348c97df44 | 869 | /** |
lypinator | 0:bb348c97df44 | 870 | * @brief Send the Application command to verify that that the next command |
lypinator | 0:bb348c97df44 | 871 | * is an application specific com-mand rather than a standard command |
lypinator | 0:bb348c97df44 | 872 | * and check the response. |
lypinator | 0:bb348c97df44 | 873 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 874 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 875 | */ |
lypinator | 0:bb348c97df44 | 876 | uint32_t SDMMC_CmdAppCommand(SDIO_TypeDef *SDIOx, uint32_t Argument) |
lypinator | 0:bb348c97df44 | 877 | { |
lypinator | 0:bb348c97df44 | 878 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 879 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 880 | |
lypinator | 0:bb348c97df44 | 881 | sdmmc_cmdinit.Argument = (uint32_t)Argument; |
lypinator | 0:bb348c97df44 | 882 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_APP_CMD; |
lypinator | 0:bb348c97df44 | 883 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 884 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 885 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 886 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 887 | |
lypinator | 0:bb348c97df44 | 888 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 889 | /* If there is a HAL_ERROR, it is a MMC card, else |
lypinator | 0:bb348c97df44 | 890 | it is a SD card: SD card 2.0 (voltage range mismatch) |
lypinator | 0:bb348c97df44 | 891 | or SD card 1.x */ |
lypinator | 0:bb348c97df44 | 892 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_APP_CMD, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 893 | |
lypinator | 0:bb348c97df44 | 894 | return errorstate; |
lypinator | 0:bb348c97df44 | 895 | } |
lypinator | 0:bb348c97df44 | 896 | |
lypinator | 0:bb348c97df44 | 897 | /** |
lypinator | 0:bb348c97df44 | 898 | * @brief Send the command asking the accessed card to send its operating |
lypinator | 0:bb348c97df44 | 899 | * condition register (OCR) |
lypinator | 0:bb348c97df44 | 900 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 901 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 902 | */ |
lypinator | 0:bb348c97df44 | 903 | uint32_t SDMMC_CmdAppOperCommand(SDIO_TypeDef *SDIOx, uint32_t SdType) |
lypinator | 0:bb348c97df44 | 904 | { |
lypinator | 0:bb348c97df44 | 905 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 906 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 907 | |
lypinator | 0:bb348c97df44 | 908 | sdmmc_cmdinit.Argument = SDMMC_VOLTAGE_WINDOW_SD | SdType; |
lypinator | 0:bb348c97df44 | 909 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_APP_OP_COND; |
lypinator | 0:bb348c97df44 | 910 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 911 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 912 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 913 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 914 | |
lypinator | 0:bb348c97df44 | 915 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 916 | errorstate = SDMMC_GetCmdResp3(SDIOx); |
lypinator | 0:bb348c97df44 | 917 | |
lypinator | 0:bb348c97df44 | 918 | return errorstate; |
lypinator | 0:bb348c97df44 | 919 | } |
lypinator | 0:bb348c97df44 | 920 | |
lypinator | 0:bb348c97df44 | 921 | /** |
lypinator | 0:bb348c97df44 | 922 | * @brief Send the Bus Width command and check the response. |
lypinator | 0:bb348c97df44 | 923 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 924 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 925 | */ |
lypinator | 0:bb348c97df44 | 926 | uint32_t SDMMC_CmdBusWidth(SDIO_TypeDef *SDIOx, uint32_t BusWidth) |
lypinator | 0:bb348c97df44 | 927 | { |
lypinator | 0:bb348c97df44 | 928 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 929 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 930 | |
lypinator | 0:bb348c97df44 | 931 | sdmmc_cmdinit.Argument = (uint32_t)BusWidth; |
lypinator | 0:bb348c97df44 | 932 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_APP_SD_SET_BUSWIDTH; |
lypinator | 0:bb348c97df44 | 933 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 934 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 935 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 936 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 937 | |
lypinator | 0:bb348c97df44 | 938 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 939 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_APP_SD_SET_BUSWIDTH, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 940 | |
lypinator | 0:bb348c97df44 | 941 | return errorstate; |
lypinator | 0:bb348c97df44 | 942 | } |
lypinator | 0:bb348c97df44 | 943 | |
lypinator | 0:bb348c97df44 | 944 | /** |
lypinator | 0:bb348c97df44 | 945 | * @brief Send the Send SCR command and check the response. |
lypinator | 0:bb348c97df44 | 946 | * @param SDIOx Pointer to SDMMC register base |
lypinator | 0:bb348c97df44 | 947 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 948 | */ |
lypinator | 0:bb348c97df44 | 949 | uint32_t SDMMC_CmdSendSCR(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 950 | { |
lypinator | 0:bb348c97df44 | 951 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 952 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 953 | |
lypinator | 0:bb348c97df44 | 954 | /* Send CMD51 SD_APP_SEND_SCR */ |
lypinator | 0:bb348c97df44 | 955 | sdmmc_cmdinit.Argument = 0U; |
lypinator | 0:bb348c97df44 | 956 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_APP_SEND_SCR; |
lypinator | 0:bb348c97df44 | 957 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 958 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 959 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 960 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 961 | |
lypinator | 0:bb348c97df44 | 962 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 963 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SD_APP_SEND_SCR, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 964 | |
lypinator | 0:bb348c97df44 | 965 | return errorstate; |
lypinator | 0:bb348c97df44 | 966 | } |
lypinator | 0:bb348c97df44 | 967 | |
lypinator | 0:bb348c97df44 | 968 | /** |
lypinator | 0:bb348c97df44 | 969 | * @brief Send the Send CID command and check the response. |
lypinator | 0:bb348c97df44 | 970 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 971 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 972 | */ |
lypinator | 0:bb348c97df44 | 973 | uint32_t SDMMC_CmdSendCID(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 974 | { |
lypinator | 0:bb348c97df44 | 975 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 976 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 977 | |
lypinator | 0:bb348c97df44 | 978 | /* Send CMD2 ALL_SEND_CID */ |
lypinator | 0:bb348c97df44 | 979 | sdmmc_cmdinit.Argument = 0U; |
lypinator | 0:bb348c97df44 | 980 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_ALL_SEND_CID; |
lypinator | 0:bb348c97df44 | 981 | sdmmc_cmdinit.Response = SDIO_RESPONSE_LONG; |
lypinator | 0:bb348c97df44 | 982 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 983 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 984 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 985 | |
lypinator | 0:bb348c97df44 | 986 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 987 | errorstate = SDMMC_GetCmdResp2(SDIOx); |
lypinator | 0:bb348c97df44 | 988 | |
lypinator | 0:bb348c97df44 | 989 | return errorstate; |
lypinator | 0:bb348c97df44 | 990 | } |
lypinator | 0:bb348c97df44 | 991 | |
lypinator | 0:bb348c97df44 | 992 | /** |
lypinator | 0:bb348c97df44 | 993 | * @brief Send the Send CSD command and check the response. |
lypinator | 0:bb348c97df44 | 994 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 995 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 996 | */ |
lypinator | 0:bb348c97df44 | 997 | uint32_t SDMMC_CmdSendCSD(SDIO_TypeDef *SDIOx, uint32_t Argument) |
lypinator | 0:bb348c97df44 | 998 | { |
lypinator | 0:bb348c97df44 | 999 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 1000 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 1001 | |
lypinator | 0:bb348c97df44 | 1002 | /* Send CMD9 SEND_CSD */ |
lypinator | 0:bb348c97df44 | 1003 | sdmmc_cmdinit.Argument = (uint32_t)Argument; |
lypinator | 0:bb348c97df44 | 1004 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEND_CSD; |
lypinator | 0:bb348c97df44 | 1005 | sdmmc_cmdinit.Response = SDIO_RESPONSE_LONG; |
lypinator | 0:bb348c97df44 | 1006 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 1007 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 1008 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 1009 | |
lypinator | 0:bb348c97df44 | 1010 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 1011 | errorstate = SDMMC_GetCmdResp2(SDIOx); |
lypinator | 0:bb348c97df44 | 1012 | |
lypinator | 0:bb348c97df44 | 1013 | return errorstate; |
lypinator | 0:bb348c97df44 | 1014 | } |
lypinator | 0:bb348c97df44 | 1015 | |
lypinator | 0:bb348c97df44 | 1016 | /** |
lypinator | 0:bb348c97df44 | 1017 | * @brief Send the Send CSD command and check the response. |
lypinator | 0:bb348c97df44 | 1018 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 1019 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 1020 | */ |
lypinator | 0:bb348c97df44 | 1021 | uint32_t SDMMC_CmdSetRelAdd(SDIO_TypeDef *SDIOx, uint16_t *pRCA) |
lypinator | 0:bb348c97df44 | 1022 | { |
lypinator | 0:bb348c97df44 | 1023 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 1024 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 1025 | |
lypinator | 0:bb348c97df44 | 1026 | /* Send CMD3 SD_CMD_SET_REL_ADDR */ |
lypinator | 0:bb348c97df44 | 1027 | sdmmc_cmdinit.Argument = 0U; |
lypinator | 0:bb348c97df44 | 1028 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SET_REL_ADDR; |
lypinator | 0:bb348c97df44 | 1029 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 1030 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 1031 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 1032 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 1033 | |
lypinator | 0:bb348c97df44 | 1034 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 1035 | errorstate = SDMMC_GetCmdResp6(SDIOx, SDMMC_CMD_SET_REL_ADDR, pRCA); |
lypinator | 0:bb348c97df44 | 1036 | |
lypinator | 0:bb348c97df44 | 1037 | return errorstate; |
lypinator | 0:bb348c97df44 | 1038 | } |
lypinator | 0:bb348c97df44 | 1039 | |
lypinator | 0:bb348c97df44 | 1040 | /** |
lypinator | 0:bb348c97df44 | 1041 | * @brief Send the Status command and check the response. |
lypinator | 0:bb348c97df44 | 1042 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 1043 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 1044 | */ |
lypinator | 0:bb348c97df44 | 1045 | uint32_t SDMMC_CmdSendStatus(SDIO_TypeDef *SDIOx, uint32_t Argument) |
lypinator | 0:bb348c97df44 | 1046 | { |
lypinator | 0:bb348c97df44 | 1047 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 1048 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 1049 | |
lypinator | 0:bb348c97df44 | 1050 | sdmmc_cmdinit.Argument = (uint32_t)Argument; |
lypinator | 0:bb348c97df44 | 1051 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEND_STATUS; |
lypinator | 0:bb348c97df44 | 1052 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 1053 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 1054 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 1055 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 1056 | |
lypinator | 0:bb348c97df44 | 1057 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 1058 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SEND_STATUS, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 1059 | |
lypinator | 0:bb348c97df44 | 1060 | return errorstate; |
lypinator | 0:bb348c97df44 | 1061 | } |
lypinator | 0:bb348c97df44 | 1062 | |
lypinator | 0:bb348c97df44 | 1063 | /** |
lypinator | 0:bb348c97df44 | 1064 | * @brief Send the Status register command and check the response. |
lypinator | 0:bb348c97df44 | 1065 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 1066 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 1067 | */ |
lypinator | 0:bb348c97df44 | 1068 | uint32_t SDMMC_CmdStatusRegister(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 1069 | { |
lypinator | 0:bb348c97df44 | 1070 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 1071 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 1072 | |
lypinator | 0:bb348c97df44 | 1073 | sdmmc_cmdinit.Argument = 0U; |
lypinator | 0:bb348c97df44 | 1074 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SD_APP_STATUS; |
lypinator | 0:bb348c97df44 | 1075 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 1076 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 1077 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 1078 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 1079 | |
lypinator | 0:bb348c97df44 | 1080 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 1081 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_SD_APP_STATUS, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 1082 | |
lypinator | 0:bb348c97df44 | 1083 | return errorstate; |
lypinator | 0:bb348c97df44 | 1084 | } |
lypinator | 0:bb348c97df44 | 1085 | |
lypinator | 0:bb348c97df44 | 1086 | /** |
lypinator | 0:bb348c97df44 | 1087 | * @brief Sends host capacity support information and activates the card's |
lypinator | 0:bb348c97df44 | 1088 | * initialization process. Send SDMMC_CMD_SEND_OP_COND command |
lypinator | 0:bb348c97df44 | 1089 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 1090 | * @parame Argument Argument used for the command |
lypinator | 0:bb348c97df44 | 1091 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 1092 | */ |
lypinator | 0:bb348c97df44 | 1093 | uint32_t SDMMC_CmdOpCondition(SDIO_TypeDef *SDIOx, uint32_t Argument) |
lypinator | 0:bb348c97df44 | 1094 | { |
lypinator | 0:bb348c97df44 | 1095 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 1096 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 1097 | |
lypinator | 0:bb348c97df44 | 1098 | sdmmc_cmdinit.Argument = Argument; |
lypinator | 0:bb348c97df44 | 1099 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEND_OP_COND; |
lypinator | 0:bb348c97df44 | 1100 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 1101 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 1102 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 1103 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 1104 | |
lypinator | 0:bb348c97df44 | 1105 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 1106 | errorstate = SDMMC_GetCmdResp3(SDIOx); |
lypinator | 0:bb348c97df44 | 1107 | |
lypinator | 0:bb348c97df44 | 1108 | return errorstate; |
lypinator | 0:bb348c97df44 | 1109 | } |
lypinator | 0:bb348c97df44 | 1110 | |
lypinator | 0:bb348c97df44 | 1111 | /** |
lypinator | 0:bb348c97df44 | 1112 | * @brief Checks switchable function and switch card function. SDMMC_CMD_HS_SWITCH comand |
lypinator | 0:bb348c97df44 | 1113 | * @param SDIOx Pointer to SDIO register base |
lypinator | 0:bb348c97df44 | 1114 | * @parame Argument Argument used for the command |
lypinator | 0:bb348c97df44 | 1115 | * @retval HAL status |
lypinator | 0:bb348c97df44 | 1116 | */ |
lypinator | 0:bb348c97df44 | 1117 | uint32_t SDMMC_CmdSwitch(SDIO_TypeDef *SDIOx, uint32_t Argument) |
lypinator | 0:bb348c97df44 | 1118 | { |
lypinator | 0:bb348c97df44 | 1119 | SDIO_CmdInitTypeDef sdmmc_cmdinit; |
lypinator | 0:bb348c97df44 | 1120 | uint32_t errorstate = SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 1121 | |
lypinator | 0:bb348c97df44 | 1122 | sdmmc_cmdinit.Argument = Argument; |
lypinator | 0:bb348c97df44 | 1123 | sdmmc_cmdinit.CmdIndex = SDMMC_CMD_HS_SWITCH; |
lypinator | 0:bb348c97df44 | 1124 | sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; |
lypinator | 0:bb348c97df44 | 1125 | sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; |
lypinator | 0:bb348c97df44 | 1126 | sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; |
lypinator | 0:bb348c97df44 | 1127 | SDIO_SendCommand(SDIOx, &sdmmc_cmdinit); |
lypinator | 0:bb348c97df44 | 1128 | |
lypinator | 0:bb348c97df44 | 1129 | /* Check for error conditions */ |
lypinator | 0:bb348c97df44 | 1130 | errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_HS_SWITCH, SDIO_CMDTIMEOUT); |
lypinator | 0:bb348c97df44 | 1131 | |
lypinator | 0:bb348c97df44 | 1132 | return errorstate; |
lypinator | 0:bb348c97df44 | 1133 | } |
lypinator | 0:bb348c97df44 | 1134 | |
lypinator | 0:bb348c97df44 | 1135 | /** |
lypinator | 0:bb348c97df44 | 1136 | * @} |
lypinator | 0:bb348c97df44 | 1137 | */ |
lypinator | 0:bb348c97df44 | 1138 | |
lypinator | 0:bb348c97df44 | 1139 | /* Private function ----------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 1140 | /** @addtogroup SD_Private_Functions |
lypinator | 0:bb348c97df44 | 1141 | * @{ |
lypinator | 0:bb348c97df44 | 1142 | */ |
lypinator | 0:bb348c97df44 | 1143 | |
lypinator | 0:bb348c97df44 | 1144 | /** |
lypinator | 0:bb348c97df44 | 1145 | * @brief Checks for error conditions for CMD0. |
lypinator | 0:bb348c97df44 | 1146 | * @param hsd SD handle |
lypinator | 0:bb348c97df44 | 1147 | * @retval SD Card error state |
lypinator | 0:bb348c97df44 | 1148 | */ |
lypinator | 0:bb348c97df44 | 1149 | static uint32_t SDMMC_GetCmdError(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 1150 | { |
lypinator | 0:bb348c97df44 | 1151 | /* 8 is the number of required instructions cycles for the below loop statement. |
lypinator | 0:bb348c97df44 | 1152 | The SDMMC_CMDTIMEOUT is expressed in ms */ |
lypinator | 0:bb348c97df44 | 1153 | register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U); |
lypinator | 0:bb348c97df44 | 1154 | |
lypinator | 0:bb348c97df44 | 1155 | do |
lypinator | 0:bb348c97df44 | 1156 | { |
lypinator | 0:bb348c97df44 | 1157 | if (count-- == 0U) |
lypinator | 0:bb348c97df44 | 1158 | { |
lypinator | 0:bb348c97df44 | 1159 | return SDMMC_ERROR_TIMEOUT; |
lypinator | 0:bb348c97df44 | 1160 | } |
lypinator | 0:bb348c97df44 | 1161 | |
lypinator | 0:bb348c97df44 | 1162 | }while(!__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CMDSENT)); |
lypinator | 0:bb348c97df44 | 1163 | |
lypinator | 0:bb348c97df44 | 1164 | /* Clear all the static flags */ |
lypinator | 0:bb348c97df44 | 1165 | __SDIO_CLEAR_FLAG(SDIOx, SDIO_STATIC_FLAGS); |
lypinator | 0:bb348c97df44 | 1166 | |
lypinator | 0:bb348c97df44 | 1167 | return SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 1168 | } |
lypinator | 0:bb348c97df44 | 1169 | |
lypinator | 0:bb348c97df44 | 1170 | /** |
lypinator | 0:bb348c97df44 | 1171 | * @brief Checks for error conditions for R1 response. |
lypinator | 0:bb348c97df44 | 1172 | * @param hsd SD handle |
lypinator | 0:bb348c97df44 | 1173 | * @param SD_CMD The sent command index |
lypinator | 0:bb348c97df44 | 1174 | * @retval SD Card error state |
lypinator | 0:bb348c97df44 | 1175 | */ |
lypinator | 0:bb348c97df44 | 1176 | static uint32_t SDMMC_GetCmdResp1(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint32_t Timeout) |
lypinator | 0:bb348c97df44 | 1177 | { |
lypinator | 0:bb348c97df44 | 1178 | uint32_t response_r1; |
lypinator | 0:bb348c97df44 | 1179 | |
lypinator | 0:bb348c97df44 | 1180 | /* 8 is the number of required instructions cycles for the below loop statement. |
lypinator | 0:bb348c97df44 | 1181 | The Timeout is expressed in ms */ |
lypinator | 0:bb348c97df44 | 1182 | register uint32_t count = Timeout * (SystemCoreClock / 8U /1000U); |
lypinator | 0:bb348c97df44 | 1183 | |
lypinator | 0:bb348c97df44 | 1184 | do |
lypinator | 0:bb348c97df44 | 1185 | { |
lypinator | 0:bb348c97df44 | 1186 | if (count-- == 0U) |
lypinator | 0:bb348c97df44 | 1187 | { |
lypinator | 0:bb348c97df44 | 1188 | return SDMMC_ERROR_TIMEOUT; |
lypinator | 0:bb348c97df44 | 1189 | } |
lypinator | 0:bb348c97df44 | 1190 | |
lypinator | 0:bb348c97df44 | 1191 | }while(!__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)); |
lypinator | 0:bb348c97df44 | 1192 | |
lypinator | 0:bb348c97df44 | 1193 | if(__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT)) |
lypinator | 0:bb348c97df44 | 1194 | { |
lypinator | 0:bb348c97df44 | 1195 | __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT); |
lypinator | 0:bb348c97df44 | 1196 | |
lypinator | 0:bb348c97df44 | 1197 | return SDMMC_ERROR_CMD_RSP_TIMEOUT; |
lypinator | 0:bb348c97df44 | 1198 | } |
lypinator | 0:bb348c97df44 | 1199 | else if(__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL)) |
lypinator | 0:bb348c97df44 | 1200 | { |
lypinator | 0:bb348c97df44 | 1201 | __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL); |
lypinator | 0:bb348c97df44 | 1202 | |
lypinator | 0:bb348c97df44 | 1203 | return SDMMC_ERROR_CMD_CRC_FAIL; |
lypinator | 0:bb348c97df44 | 1204 | } |
lypinator | 0:bb348c97df44 | 1205 | |
lypinator | 0:bb348c97df44 | 1206 | /* Check response received is of desired command */ |
lypinator | 0:bb348c97df44 | 1207 | if(SDIO_GetCommandResponse(SDIOx) != SD_CMD) |
lypinator | 0:bb348c97df44 | 1208 | { |
lypinator | 0:bb348c97df44 | 1209 | return SDMMC_ERROR_CMD_CRC_FAIL; |
lypinator | 0:bb348c97df44 | 1210 | } |
lypinator | 0:bb348c97df44 | 1211 | |
lypinator | 0:bb348c97df44 | 1212 | /* Clear all the static flags */ |
lypinator | 0:bb348c97df44 | 1213 | __SDIO_CLEAR_FLAG(SDIOx, SDIO_STATIC_FLAGS); |
lypinator | 0:bb348c97df44 | 1214 | |
lypinator | 0:bb348c97df44 | 1215 | /* We have received response, retrieve it for analysis */ |
lypinator | 0:bb348c97df44 | 1216 | response_r1 = SDIO_GetResponse(SDIOx, SDIO_RESP1); |
lypinator | 0:bb348c97df44 | 1217 | |
lypinator | 0:bb348c97df44 | 1218 | if((response_r1 & SDMMC_OCR_ERRORBITS) == SDMMC_ALLZERO) |
lypinator | 0:bb348c97df44 | 1219 | { |
lypinator | 0:bb348c97df44 | 1220 | return SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 1221 | } |
lypinator | 0:bb348c97df44 | 1222 | else if((response_r1 & SDMMC_OCR_ADDR_OUT_OF_RANGE) == SDMMC_OCR_ADDR_OUT_OF_RANGE) |
lypinator | 0:bb348c97df44 | 1223 | { |
lypinator | 0:bb348c97df44 | 1224 | return SDMMC_ERROR_ADDR_OUT_OF_RANGE; |
lypinator | 0:bb348c97df44 | 1225 | } |
lypinator | 0:bb348c97df44 | 1226 | else if((response_r1 & SDMMC_OCR_ADDR_MISALIGNED) == SDMMC_OCR_ADDR_MISALIGNED) |
lypinator | 0:bb348c97df44 | 1227 | { |
lypinator | 0:bb348c97df44 | 1228 | return SDMMC_ERROR_ADDR_MISALIGNED; |
lypinator | 0:bb348c97df44 | 1229 | } |
lypinator | 0:bb348c97df44 | 1230 | else if((response_r1 & SDMMC_OCR_BLOCK_LEN_ERR) == SDMMC_OCR_BLOCK_LEN_ERR) |
lypinator | 0:bb348c97df44 | 1231 | { |
lypinator | 0:bb348c97df44 | 1232 | return SDMMC_ERROR_BLOCK_LEN_ERR; |
lypinator | 0:bb348c97df44 | 1233 | } |
lypinator | 0:bb348c97df44 | 1234 | else if((response_r1 & SDMMC_OCR_ERASE_SEQ_ERR) == SDMMC_OCR_ERASE_SEQ_ERR) |
lypinator | 0:bb348c97df44 | 1235 | { |
lypinator | 0:bb348c97df44 | 1236 | return SDMMC_ERROR_ERASE_SEQ_ERR; |
lypinator | 0:bb348c97df44 | 1237 | } |
lypinator | 0:bb348c97df44 | 1238 | else if((response_r1 & SDMMC_OCR_BAD_ERASE_PARAM) == SDMMC_OCR_BAD_ERASE_PARAM) |
lypinator | 0:bb348c97df44 | 1239 | { |
lypinator | 0:bb348c97df44 | 1240 | return SDMMC_ERROR_BAD_ERASE_PARAM; |
lypinator | 0:bb348c97df44 | 1241 | } |
lypinator | 0:bb348c97df44 | 1242 | else if((response_r1 & SDMMC_OCR_WRITE_PROT_VIOLATION) == SDMMC_OCR_WRITE_PROT_VIOLATION) |
lypinator | 0:bb348c97df44 | 1243 | { |
lypinator | 0:bb348c97df44 | 1244 | return SDMMC_ERROR_WRITE_PROT_VIOLATION; |
lypinator | 0:bb348c97df44 | 1245 | } |
lypinator | 0:bb348c97df44 | 1246 | else if((response_r1 & SDMMC_OCR_LOCK_UNLOCK_FAILED) == SDMMC_OCR_LOCK_UNLOCK_FAILED) |
lypinator | 0:bb348c97df44 | 1247 | { |
lypinator | 0:bb348c97df44 | 1248 | return SDMMC_ERROR_LOCK_UNLOCK_FAILED; |
lypinator | 0:bb348c97df44 | 1249 | } |
lypinator | 0:bb348c97df44 | 1250 | else if((response_r1 & SDMMC_OCR_COM_CRC_FAILED) == SDMMC_OCR_COM_CRC_FAILED) |
lypinator | 0:bb348c97df44 | 1251 | { |
lypinator | 0:bb348c97df44 | 1252 | return SDMMC_ERROR_COM_CRC_FAILED; |
lypinator | 0:bb348c97df44 | 1253 | } |
lypinator | 0:bb348c97df44 | 1254 | else if((response_r1 & SDMMC_OCR_ILLEGAL_CMD) == SDMMC_OCR_ILLEGAL_CMD) |
lypinator | 0:bb348c97df44 | 1255 | { |
lypinator | 0:bb348c97df44 | 1256 | return SDMMC_ERROR_ILLEGAL_CMD; |
lypinator | 0:bb348c97df44 | 1257 | } |
lypinator | 0:bb348c97df44 | 1258 | else if((response_r1 & SDMMC_OCR_CARD_ECC_FAILED) == SDMMC_OCR_CARD_ECC_FAILED) |
lypinator | 0:bb348c97df44 | 1259 | { |
lypinator | 0:bb348c97df44 | 1260 | return SDMMC_ERROR_CARD_ECC_FAILED; |
lypinator | 0:bb348c97df44 | 1261 | } |
lypinator | 0:bb348c97df44 | 1262 | else if((response_r1 & SDMMC_OCR_CC_ERROR) == SDMMC_OCR_CC_ERROR) |
lypinator | 0:bb348c97df44 | 1263 | { |
lypinator | 0:bb348c97df44 | 1264 | return SDMMC_ERROR_CC_ERR; |
lypinator | 0:bb348c97df44 | 1265 | } |
lypinator | 0:bb348c97df44 | 1266 | else if((response_r1 & SDMMC_OCR_STREAM_READ_UNDERRUN) == SDMMC_OCR_STREAM_READ_UNDERRUN) |
lypinator | 0:bb348c97df44 | 1267 | { |
lypinator | 0:bb348c97df44 | 1268 | return SDMMC_ERROR_STREAM_READ_UNDERRUN; |
lypinator | 0:bb348c97df44 | 1269 | } |
lypinator | 0:bb348c97df44 | 1270 | else if((response_r1 & SDMMC_OCR_STREAM_WRITE_OVERRUN) == SDMMC_OCR_STREAM_WRITE_OVERRUN) |
lypinator | 0:bb348c97df44 | 1271 | { |
lypinator | 0:bb348c97df44 | 1272 | return SDMMC_ERROR_STREAM_WRITE_OVERRUN; |
lypinator | 0:bb348c97df44 | 1273 | } |
lypinator | 0:bb348c97df44 | 1274 | else if((response_r1 & SDMMC_OCR_CID_CSD_OVERWRITE) == SDMMC_OCR_CID_CSD_OVERWRITE) |
lypinator | 0:bb348c97df44 | 1275 | { |
lypinator | 0:bb348c97df44 | 1276 | return SDMMC_ERROR_CID_CSD_OVERWRITE; |
lypinator | 0:bb348c97df44 | 1277 | } |
lypinator | 0:bb348c97df44 | 1278 | else if((response_r1 & SDMMC_OCR_WP_ERASE_SKIP) == SDMMC_OCR_WP_ERASE_SKIP) |
lypinator | 0:bb348c97df44 | 1279 | { |
lypinator | 0:bb348c97df44 | 1280 | return SDMMC_ERROR_WP_ERASE_SKIP; |
lypinator | 0:bb348c97df44 | 1281 | } |
lypinator | 0:bb348c97df44 | 1282 | else if((response_r1 & SDMMC_OCR_CARD_ECC_DISABLED) == SDMMC_OCR_CARD_ECC_DISABLED) |
lypinator | 0:bb348c97df44 | 1283 | { |
lypinator | 0:bb348c97df44 | 1284 | return SDMMC_ERROR_CARD_ECC_DISABLED; |
lypinator | 0:bb348c97df44 | 1285 | } |
lypinator | 0:bb348c97df44 | 1286 | else if((response_r1 & SDMMC_OCR_ERASE_RESET) == SDMMC_OCR_ERASE_RESET) |
lypinator | 0:bb348c97df44 | 1287 | { |
lypinator | 0:bb348c97df44 | 1288 | return SDMMC_ERROR_ERASE_RESET; |
lypinator | 0:bb348c97df44 | 1289 | } |
lypinator | 0:bb348c97df44 | 1290 | else if((response_r1 & SDMMC_OCR_AKE_SEQ_ERROR) == SDMMC_OCR_AKE_SEQ_ERROR) |
lypinator | 0:bb348c97df44 | 1291 | { |
lypinator | 0:bb348c97df44 | 1292 | return SDMMC_ERROR_AKE_SEQ_ERR; |
lypinator | 0:bb348c97df44 | 1293 | } |
lypinator | 0:bb348c97df44 | 1294 | else |
lypinator | 0:bb348c97df44 | 1295 | { |
lypinator | 0:bb348c97df44 | 1296 | return SDMMC_ERROR_GENERAL_UNKNOWN_ERR; |
lypinator | 0:bb348c97df44 | 1297 | } |
lypinator | 0:bb348c97df44 | 1298 | } |
lypinator | 0:bb348c97df44 | 1299 | |
lypinator | 0:bb348c97df44 | 1300 | /** |
lypinator | 0:bb348c97df44 | 1301 | * @brief Checks for error conditions for R2 (CID or CSD) response. |
lypinator | 0:bb348c97df44 | 1302 | * @param hsd SD handle |
lypinator | 0:bb348c97df44 | 1303 | * @retval SD Card error state |
lypinator | 0:bb348c97df44 | 1304 | */ |
lypinator | 0:bb348c97df44 | 1305 | static uint32_t SDMMC_GetCmdResp2(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 1306 | { |
lypinator | 0:bb348c97df44 | 1307 | /* 8 is the number of required instructions cycles for the below loop statement. |
lypinator | 0:bb348c97df44 | 1308 | The SDMMC_CMDTIMEOUT is expressed in ms */ |
lypinator | 0:bb348c97df44 | 1309 | register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U); |
lypinator | 0:bb348c97df44 | 1310 | |
lypinator | 0:bb348c97df44 | 1311 | do |
lypinator | 0:bb348c97df44 | 1312 | { |
lypinator | 0:bb348c97df44 | 1313 | if (count-- == 0U) |
lypinator | 0:bb348c97df44 | 1314 | { |
lypinator | 0:bb348c97df44 | 1315 | return SDMMC_ERROR_TIMEOUT; |
lypinator | 0:bb348c97df44 | 1316 | } |
lypinator | 0:bb348c97df44 | 1317 | |
lypinator | 0:bb348c97df44 | 1318 | }while(!__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)); |
lypinator | 0:bb348c97df44 | 1319 | |
lypinator | 0:bb348c97df44 | 1320 | if (__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT)) |
lypinator | 0:bb348c97df44 | 1321 | { |
lypinator | 0:bb348c97df44 | 1322 | __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT); |
lypinator | 0:bb348c97df44 | 1323 | |
lypinator | 0:bb348c97df44 | 1324 | return SDMMC_ERROR_CMD_RSP_TIMEOUT; |
lypinator | 0:bb348c97df44 | 1325 | } |
lypinator | 0:bb348c97df44 | 1326 | else if (__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL)) |
lypinator | 0:bb348c97df44 | 1327 | { |
lypinator | 0:bb348c97df44 | 1328 | __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL); |
lypinator | 0:bb348c97df44 | 1329 | |
lypinator | 0:bb348c97df44 | 1330 | return SDMMC_ERROR_CMD_CRC_FAIL; |
lypinator | 0:bb348c97df44 | 1331 | } |
lypinator | 0:bb348c97df44 | 1332 | else |
lypinator | 0:bb348c97df44 | 1333 | { |
lypinator | 0:bb348c97df44 | 1334 | /* No error flag set */ |
lypinator | 0:bb348c97df44 | 1335 | /* Clear all the static flags */ |
lypinator | 0:bb348c97df44 | 1336 | __SDIO_CLEAR_FLAG(SDIOx, SDIO_STATIC_FLAGS); |
lypinator | 0:bb348c97df44 | 1337 | } |
lypinator | 0:bb348c97df44 | 1338 | |
lypinator | 0:bb348c97df44 | 1339 | return SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 1340 | } |
lypinator | 0:bb348c97df44 | 1341 | |
lypinator | 0:bb348c97df44 | 1342 | /** |
lypinator | 0:bb348c97df44 | 1343 | * @brief Checks for error conditions for R3 (OCR) response. |
lypinator | 0:bb348c97df44 | 1344 | * @param hsd SD handle |
lypinator | 0:bb348c97df44 | 1345 | * @retval SD Card error state |
lypinator | 0:bb348c97df44 | 1346 | */ |
lypinator | 0:bb348c97df44 | 1347 | static uint32_t SDMMC_GetCmdResp3(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 1348 | { |
lypinator | 0:bb348c97df44 | 1349 | /* 8 is the number of required instructions cycles for the below loop statement. |
lypinator | 0:bb348c97df44 | 1350 | The SDMMC_CMDTIMEOUT is expressed in ms */ |
lypinator | 0:bb348c97df44 | 1351 | register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U); |
lypinator | 0:bb348c97df44 | 1352 | |
lypinator | 0:bb348c97df44 | 1353 | do |
lypinator | 0:bb348c97df44 | 1354 | { |
lypinator | 0:bb348c97df44 | 1355 | if (count-- == 0U) |
lypinator | 0:bb348c97df44 | 1356 | { |
lypinator | 0:bb348c97df44 | 1357 | return SDMMC_ERROR_TIMEOUT; |
lypinator | 0:bb348c97df44 | 1358 | } |
lypinator | 0:bb348c97df44 | 1359 | |
lypinator | 0:bb348c97df44 | 1360 | }while(!__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)); |
lypinator | 0:bb348c97df44 | 1361 | |
lypinator | 0:bb348c97df44 | 1362 | if(__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT)) |
lypinator | 0:bb348c97df44 | 1363 | { |
lypinator | 0:bb348c97df44 | 1364 | __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT); |
lypinator | 0:bb348c97df44 | 1365 | |
lypinator | 0:bb348c97df44 | 1366 | return SDMMC_ERROR_CMD_RSP_TIMEOUT; |
lypinator | 0:bb348c97df44 | 1367 | } |
lypinator | 0:bb348c97df44 | 1368 | else |
lypinator | 0:bb348c97df44 | 1369 | |
lypinator | 0:bb348c97df44 | 1370 | { |
lypinator | 0:bb348c97df44 | 1371 | /* Clear all the static flags */ |
lypinator | 0:bb348c97df44 | 1372 | __SDIO_CLEAR_FLAG(SDIOx, SDIO_STATIC_FLAGS); |
lypinator | 0:bb348c97df44 | 1373 | } |
lypinator | 0:bb348c97df44 | 1374 | |
lypinator | 0:bb348c97df44 | 1375 | return SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 1376 | } |
lypinator | 0:bb348c97df44 | 1377 | |
lypinator | 0:bb348c97df44 | 1378 | /** |
lypinator | 0:bb348c97df44 | 1379 | * @brief Checks for error conditions for R6 (RCA) response. |
lypinator | 0:bb348c97df44 | 1380 | * @param hsd SD handle |
lypinator | 0:bb348c97df44 | 1381 | * @param SD_CMD The sent command index |
lypinator | 0:bb348c97df44 | 1382 | * @param pRCA Pointer to the variable that will contain the SD card relative |
lypinator | 0:bb348c97df44 | 1383 | * address RCA |
lypinator | 0:bb348c97df44 | 1384 | * @retval SD Card error state |
lypinator | 0:bb348c97df44 | 1385 | */ |
lypinator | 0:bb348c97df44 | 1386 | static uint32_t SDMMC_GetCmdResp6(SDIO_TypeDef *SDIOx, uint8_t SD_CMD, uint16_t *pRCA) |
lypinator | 0:bb348c97df44 | 1387 | { |
lypinator | 0:bb348c97df44 | 1388 | uint32_t response_r1; |
lypinator | 0:bb348c97df44 | 1389 | |
lypinator | 0:bb348c97df44 | 1390 | /* 8 is the number of required instructions cycles for the below loop statement. |
lypinator | 0:bb348c97df44 | 1391 | The SDMMC_CMDTIMEOUT is expressed in ms */ |
lypinator | 0:bb348c97df44 | 1392 | register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U); |
lypinator | 0:bb348c97df44 | 1393 | |
lypinator | 0:bb348c97df44 | 1394 | do |
lypinator | 0:bb348c97df44 | 1395 | { |
lypinator | 0:bb348c97df44 | 1396 | if (count-- == 0U) |
lypinator | 0:bb348c97df44 | 1397 | { |
lypinator | 0:bb348c97df44 | 1398 | return SDMMC_ERROR_TIMEOUT; |
lypinator | 0:bb348c97df44 | 1399 | } |
lypinator | 0:bb348c97df44 | 1400 | |
lypinator | 0:bb348c97df44 | 1401 | }while(!__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)); |
lypinator | 0:bb348c97df44 | 1402 | |
lypinator | 0:bb348c97df44 | 1403 | if(__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT)) |
lypinator | 0:bb348c97df44 | 1404 | { |
lypinator | 0:bb348c97df44 | 1405 | __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT); |
lypinator | 0:bb348c97df44 | 1406 | |
lypinator | 0:bb348c97df44 | 1407 | return SDMMC_ERROR_CMD_RSP_TIMEOUT; |
lypinator | 0:bb348c97df44 | 1408 | } |
lypinator | 0:bb348c97df44 | 1409 | else if(__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL)) |
lypinator | 0:bb348c97df44 | 1410 | { |
lypinator | 0:bb348c97df44 | 1411 | __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL); |
lypinator | 0:bb348c97df44 | 1412 | |
lypinator | 0:bb348c97df44 | 1413 | return SDMMC_ERROR_CMD_CRC_FAIL; |
lypinator | 0:bb348c97df44 | 1414 | } |
lypinator | 0:bb348c97df44 | 1415 | |
lypinator | 0:bb348c97df44 | 1416 | /* Check response received is of desired command */ |
lypinator | 0:bb348c97df44 | 1417 | if(SDIO_GetCommandResponse(SDIOx) != SD_CMD) |
lypinator | 0:bb348c97df44 | 1418 | { |
lypinator | 0:bb348c97df44 | 1419 | return SDMMC_ERROR_CMD_CRC_FAIL; |
lypinator | 0:bb348c97df44 | 1420 | } |
lypinator | 0:bb348c97df44 | 1421 | |
lypinator | 0:bb348c97df44 | 1422 | /* Clear all the static flags */ |
lypinator | 0:bb348c97df44 | 1423 | __SDIO_CLEAR_FLAG(SDIOx, SDIO_STATIC_FLAGS); |
lypinator | 0:bb348c97df44 | 1424 | |
lypinator | 0:bb348c97df44 | 1425 | /* We have received response, retrieve it. */ |
lypinator | 0:bb348c97df44 | 1426 | response_r1 = SDIO_GetResponse(SDIOx, SDIO_RESP1); |
lypinator | 0:bb348c97df44 | 1427 | |
lypinator | 0:bb348c97df44 | 1428 | if((response_r1 & (SDMMC_R6_GENERAL_UNKNOWN_ERROR | SDMMC_R6_ILLEGAL_CMD | SDMMC_R6_COM_CRC_FAILED)) == SDMMC_ALLZERO) |
lypinator | 0:bb348c97df44 | 1429 | { |
lypinator | 0:bb348c97df44 | 1430 | *pRCA = (uint16_t) (response_r1 >> 16); |
lypinator | 0:bb348c97df44 | 1431 | |
lypinator | 0:bb348c97df44 | 1432 | return SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 1433 | } |
lypinator | 0:bb348c97df44 | 1434 | else if((response_r1 & SDMMC_R6_ILLEGAL_CMD) == SDMMC_R6_ILLEGAL_CMD) |
lypinator | 0:bb348c97df44 | 1435 | { |
lypinator | 0:bb348c97df44 | 1436 | return SDMMC_ERROR_ILLEGAL_CMD; |
lypinator | 0:bb348c97df44 | 1437 | } |
lypinator | 0:bb348c97df44 | 1438 | else if((response_r1 & SDMMC_R6_COM_CRC_FAILED) == SDMMC_R6_COM_CRC_FAILED) |
lypinator | 0:bb348c97df44 | 1439 | { |
lypinator | 0:bb348c97df44 | 1440 | return SDMMC_ERROR_COM_CRC_FAILED; |
lypinator | 0:bb348c97df44 | 1441 | } |
lypinator | 0:bb348c97df44 | 1442 | else |
lypinator | 0:bb348c97df44 | 1443 | { |
lypinator | 0:bb348c97df44 | 1444 | return SDMMC_ERROR_GENERAL_UNKNOWN_ERR; |
lypinator | 0:bb348c97df44 | 1445 | } |
lypinator | 0:bb348c97df44 | 1446 | } |
lypinator | 0:bb348c97df44 | 1447 | |
lypinator | 0:bb348c97df44 | 1448 | /** |
lypinator | 0:bb348c97df44 | 1449 | * @brief Checks for error conditions for R7 response. |
lypinator | 0:bb348c97df44 | 1450 | * @param hsd SD handle |
lypinator | 0:bb348c97df44 | 1451 | * @retval SD Card error state |
lypinator | 0:bb348c97df44 | 1452 | */ |
lypinator | 0:bb348c97df44 | 1453 | static uint32_t SDMMC_GetCmdResp7(SDIO_TypeDef *SDIOx) |
lypinator | 0:bb348c97df44 | 1454 | { |
lypinator | 0:bb348c97df44 | 1455 | /* 8 is the number of required instructions cycles for the below loop statement. |
lypinator | 0:bb348c97df44 | 1456 | The SDIO_CMDTIMEOUT is expressed in ms */ |
lypinator | 0:bb348c97df44 | 1457 | register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U); |
lypinator | 0:bb348c97df44 | 1458 | |
lypinator | 0:bb348c97df44 | 1459 | do |
lypinator | 0:bb348c97df44 | 1460 | { |
lypinator | 0:bb348c97df44 | 1461 | if (count-- == 0U) |
lypinator | 0:bb348c97df44 | 1462 | { |
lypinator | 0:bb348c97df44 | 1463 | return SDMMC_ERROR_TIMEOUT; |
lypinator | 0:bb348c97df44 | 1464 | } |
lypinator | 0:bb348c97df44 | 1465 | |
lypinator | 0:bb348c97df44 | 1466 | }while(!__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)); |
lypinator | 0:bb348c97df44 | 1467 | |
lypinator | 0:bb348c97df44 | 1468 | if(__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CTIMEOUT)) |
lypinator | 0:bb348c97df44 | 1469 | { |
lypinator | 0:bb348c97df44 | 1470 | /* Card is SD V2.0 compliant */ |
lypinator | 0:bb348c97df44 | 1471 | __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CMDREND); |
lypinator | 0:bb348c97df44 | 1472 | |
lypinator | 0:bb348c97df44 | 1473 | return SDMMC_ERROR_CMD_RSP_TIMEOUT; |
lypinator | 0:bb348c97df44 | 1474 | } |
lypinator | 0:bb348c97df44 | 1475 | |
lypinator | 0:bb348c97df44 | 1476 | if(__SDIO_GET_FLAG(SDIOx, SDIO_FLAG_CMDREND)) |
lypinator | 0:bb348c97df44 | 1477 | { |
lypinator | 0:bb348c97df44 | 1478 | /* Card is SD V2.0 compliant */ |
lypinator | 0:bb348c97df44 | 1479 | __SDIO_CLEAR_FLAG(SDIOx, SDIO_FLAG_CMDREND); |
lypinator | 0:bb348c97df44 | 1480 | } |
lypinator | 0:bb348c97df44 | 1481 | |
lypinator | 0:bb348c97df44 | 1482 | return SDMMC_ERROR_NONE; |
lypinator | 0:bb348c97df44 | 1483 | |
lypinator | 0:bb348c97df44 | 1484 | } |
lypinator | 0:bb348c97df44 | 1485 | |
lypinator | 0:bb348c97df44 | 1486 | /** |
lypinator | 0:bb348c97df44 | 1487 | * @} |
lypinator | 0:bb348c97df44 | 1488 | */ |
lypinator | 0:bb348c97df44 | 1489 | |
lypinator | 0:bb348c97df44 | 1490 | /** |
lypinator | 0:bb348c97df44 | 1491 | * @} |
lypinator | 0:bb348c97df44 | 1492 | */ |
lypinator | 0:bb348c97df44 | 1493 | |
lypinator | 0:bb348c97df44 | 1494 | #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || |
lypinator | 0:bb348c97df44 | 1495 | STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || |
lypinator | 0:bb348c97df44 | 1496 | STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ |
lypinator | 0:bb348c97df44 | 1497 | #endif /* (HAL_SD_MODULE_ENABLED) || (HAL_MMC_MODULE_ENABLED) */ |
lypinator | 0:bb348c97df44 | 1498 | |
lypinator | 0:bb348c97df44 | 1499 | /** |
lypinator | 0:bb348c97df44 | 1500 | * @} |
lypinator | 0:bb348c97df44 | 1501 | */ |
lypinator | 0:bb348c97df44 | 1502 | |
lypinator | 0:bb348c97df44 | 1503 | /** |
lypinator | 0:bb348c97df44 | 1504 | * @} |
lypinator | 0:bb348c97df44 | 1505 | */ |
lypinator | 0:bb348c97df44 | 1506 | |
lypinator | 0:bb348c97df44 | 1507 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |