Initial commit
mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_ll_gpio.h@0:bb348c97df44, 2020-09-16 (annotated)
- Committer:
- lypinator
- Date:
- Wed Sep 16 01:11:49 2020 +0000
- Revision:
- 0:bb348c97df44
Added PWM
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
lypinator | 0:bb348c97df44 | 1 | /** |
lypinator | 0:bb348c97df44 | 2 | ****************************************************************************** |
lypinator | 0:bb348c97df44 | 3 | * @file stm32f4xx_ll_gpio.h |
lypinator | 0:bb348c97df44 | 4 | * @author MCD Application Team |
lypinator | 0:bb348c97df44 | 5 | * @brief Header file of GPIO LL module. |
lypinator | 0:bb348c97df44 | 6 | ****************************************************************************** |
lypinator | 0:bb348c97df44 | 7 | * @attention |
lypinator | 0:bb348c97df44 | 8 | * |
lypinator | 0:bb348c97df44 | 9 | * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> |
lypinator | 0:bb348c97df44 | 10 | * |
lypinator | 0:bb348c97df44 | 11 | * Redistribution and use in source and binary forms, with or without modification, |
lypinator | 0:bb348c97df44 | 12 | * are permitted provided that the following conditions are met: |
lypinator | 0:bb348c97df44 | 13 | * 1. Redistributions of source code must retain the above copyright notice, |
lypinator | 0:bb348c97df44 | 14 | * this list of conditions and the following disclaimer. |
lypinator | 0:bb348c97df44 | 15 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
lypinator | 0:bb348c97df44 | 16 | * this list of conditions and the following disclaimer in the documentation |
lypinator | 0:bb348c97df44 | 17 | * and/or other materials provided with the distribution. |
lypinator | 0:bb348c97df44 | 18 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
lypinator | 0:bb348c97df44 | 19 | * may be used to endorse or promote products derived from this software |
lypinator | 0:bb348c97df44 | 20 | * without specific prior written permission. |
lypinator | 0:bb348c97df44 | 21 | * |
lypinator | 0:bb348c97df44 | 22 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
lypinator | 0:bb348c97df44 | 23 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
lypinator | 0:bb348c97df44 | 24 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
lypinator | 0:bb348c97df44 | 25 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
lypinator | 0:bb348c97df44 | 26 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
lypinator | 0:bb348c97df44 | 27 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
lypinator | 0:bb348c97df44 | 28 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
lypinator | 0:bb348c97df44 | 29 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
lypinator | 0:bb348c97df44 | 30 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
lypinator | 0:bb348c97df44 | 31 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
lypinator | 0:bb348c97df44 | 32 | * |
lypinator | 0:bb348c97df44 | 33 | ****************************************************************************** |
lypinator | 0:bb348c97df44 | 34 | */ |
lypinator | 0:bb348c97df44 | 35 | |
lypinator | 0:bb348c97df44 | 36 | /* Define to prevent recursive inclusion -------------------------------------*/ |
lypinator | 0:bb348c97df44 | 37 | #ifndef __STM32F4xx_LL_GPIO_H |
lypinator | 0:bb348c97df44 | 38 | #define __STM32F4xx_LL_GPIO_H |
lypinator | 0:bb348c97df44 | 39 | |
lypinator | 0:bb348c97df44 | 40 | #ifdef __cplusplus |
lypinator | 0:bb348c97df44 | 41 | extern "C" { |
lypinator | 0:bb348c97df44 | 42 | #endif |
lypinator | 0:bb348c97df44 | 43 | |
lypinator | 0:bb348c97df44 | 44 | /* Includes ------------------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 45 | #include "stm32f4xx.h" |
lypinator | 0:bb348c97df44 | 46 | |
lypinator | 0:bb348c97df44 | 47 | /** @addtogroup STM32F4xx_LL_Driver |
lypinator | 0:bb348c97df44 | 48 | * @{ |
lypinator | 0:bb348c97df44 | 49 | */ |
lypinator | 0:bb348c97df44 | 50 | |
lypinator | 0:bb348c97df44 | 51 | #if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) |
lypinator | 0:bb348c97df44 | 52 | |
lypinator | 0:bb348c97df44 | 53 | /** @defgroup GPIO_LL GPIO |
lypinator | 0:bb348c97df44 | 54 | * @{ |
lypinator | 0:bb348c97df44 | 55 | */ |
lypinator | 0:bb348c97df44 | 56 | |
lypinator | 0:bb348c97df44 | 57 | /* Private types -------------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 58 | /* Private variables ---------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 59 | /* Private constants ---------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 60 | /* Private macros ------------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 61 | #if defined(USE_FULL_LL_DRIVER) |
lypinator | 0:bb348c97df44 | 62 | /** @defgroup GPIO_LL_Private_Macros GPIO Private Macros |
lypinator | 0:bb348c97df44 | 63 | * @{ |
lypinator | 0:bb348c97df44 | 64 | */ |
lypinator | 0:bb348c97df44 | 65 | |
lypinator | 0:bb348c97df44 | 66 | /** |
lypinator | 0:bb348c97df44 | 67 | * @} |
lypinator | 0:bb348c97df44 | 68 | */ |
lypinator | 0:bb348c97df44 | 69 | #endif /*USE_FULL_LL_DRIVER*/ |
lypinator | 0:bb348c97df44 | 70 | |
lypinator | 0:bb348c97df44 | 71 | /* Exported types ------------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 72 | #if defined(USE_FULL_LL_DRIVER) |
lypinator | 0:bb348c97df44 | 73 | /** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures |
lypinator | 0:bb348c97df44 | 74 | * @{ |
lypinator | 0:bb348c97df44 | 75 | */ |
lypinator | 0:bb348c97df44 | 76 | |
lypinator | 0:bb348c97df44 | 77 | /** |
lypinator | 0:bb348c97df44 | 78 | * @brief LL GPIO Init Structure definition |
lypinator | 0:bb348c97df44 | 79 | */ |
lypinator | 0:bb348c97df44 | 80 | typedef struct |
lypinator | 0:bb348c97df44 | 81 | { |
lypinator | 0:bb348c97df44 | 82 | uint32_t Pin; /*!< Specifies the GPIO pins to be configured. |
lypinator | 0:bb348c97df44 | 83 | This parameter can be any value of @ref GPIO_LL_EC_PIN */ |
lypinator | 0:bb348c97df44 | 84 | |
lypinator | 0:bb348c97df44 | 85 | uint32_t Mode; /*!< Specifies the operating mode for the selected pins. |
lypinator | 0:bb348c97df44 | 86 | This parameter can be a value of @ref GPIO_LL_EC_MODE. |
lypinator | 0:bb348c97df44 | 87 | |
lypinator | 0:bb348c97df44 | 88 | GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ |
lypinator | 0:bb348c97df44 | 89 | |
lypinator | 0:bb348c97df44 | 90 | uint32_t Speed; /*!< Specifies the speed for the selected pins. |
lypinator | 0:bb348c97df44 | 91 | This parameter can be a value of @ref GPIO_LL_EC_SPEED. |
lypinator | 0:bb348c97df44 | 92 | |
lypinator | 0:bb348c97df44 | 93 | GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ |
lypinator | 0:bb348c97df44 | 94 | |
lypinator | 0:bb348c97df44 | 95 | uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. |
lypinator | 0:bb348c97df44 | 96 | This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. |
lypinator | 0:bb348c97df44 | 97 | |
lypinator | 0:bb348c97df44 | 98 | GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ |
lypinator | 0:bb348c97df44 | 99 | |
lypinator | 0:bb348c97df44 | 100 | uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. |
lypinator | 0:bb348c97df44 | 101 | This parameter can be a value of @ref GPIO_LL_EC_PULL. |
lypinator | 0:bb348c97df44 | 102 | |
lypinator | 0:bb348c97df44 | 103 | GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ |
lypinator | 0:bb348c97df44 | 104 | |
lypinator | 0:bb348c97df44 | 105 | uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. |
lypinator | 0:bb348c97df44 | 106 | This parameter can be a value of @ref GPIO_LL_EC_AF. |
lypinator | 0:bb348c97df44 | 107 | |
lypinator | 0:bb348c97df44 | 108 | GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ |
lypinator | 0:bb348c97df44 | 109 | } LL_GPIO_InitTypeDef; |
lypinator | 0:bb348c97df44 | 110 | |
lypinator | 0:bb348c97df44 | 111 | /** |
lypinator | 0:bb348c97df44 | 112 | * @} |
lypinator | 0:bb348c97df44 | 113 | */ |
lypinator | 0:bb348c97df44 | 114 | #endif /* USE_FULL_LL_DRIVER */ |
lypinator | 0:bb348c97df44 | 115 | |
lypinator | 0:bb348c97df44 | 116 | /* Exported constants --------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 117 | /** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants |
lypinator | 0:bb348c97df44 | 118 | * @{ |
lypinator | 0:bb348c97df44 | 119 | */ |
lypinator | 0:bb348c97df44 | 120 | |
lypinator | 0:bb348c97df44 | 121 | /** @defgroup GPIO_LL_EC_PIN PIN |
lypinator | 0:bb348c97df44 | 122 | * @{ |
lypinator | 0:bb348c97df44 | 123 | */ |
lypinator | 0:bb348c97df44 | 124 | #define LL_GPIO_PIN_0 GPIO_BSRR_BS_0 /*!< Select pin 0 */ |
lypinator | 0:bb348c97df44 | 125 | #define LL_GPIO_PIN_1 GPIO_BSRR_BS_1 /*!< Select pin 1 */ |
lypinator | 0:bb348c97df44 | 126 | #define LL_GPIO_PIN_2 GPIO_BSRR_BS_2 /*!< Select pin 2 */ |
lypinator | 0:bb348c97df44 | 127 | #define LL_GPIO_PIN_3 GPIO_BSRR_BS_3 /*!< Select pin 3 */ |
lypinator | 0:bb348c97df44 | 128 | #define LL_GPIO_PIN_4 GPIO_BSRR_BS_4 /*!< Select pin 4 */ |
lypinator | 0:bb348c97df44 | 129 | #define LL_GPIO_PIN_5 GPIO_BSRR_BS_5 /*!< Select pin 5 */ |
lypinator | 0:bb348c97df44 | 130 | #define LL_GPIO_PIN_6 GPIO_BSRR_BS_6 /*!< Select pin 6 */ |
lypinator | 0:bb348c97df44 | 131 | #define LL_GPIO_PIN_7 GPIO_BSRR_BS_7 /*!< Select pin 7 */ |
lypinator | 0:bb348c97df44 | 132 | #define LL_GPIO_PIN_8 GPIO_BSRR_BS_8 /*!< Select pin 8 */ |
lypinator | 0:bb348c97df44 | 133 | #define LL_GPIO_PIN_9 GPIO_BSRR_BS_9 /*!< Select pin 9 */ |
lypinator | 0:bb348c97df44 | 134 | #define LL_GPIO_PIN_10 GPIO_BSRR_BS_10 /*!< Select pin 10 */ |
lypinator | 0:bb348c97df44 | 135 | #define LL_GPIO_PIN_11 GPIO_BSRR_BS_11 /*!< Select pin 11 */ |
lypinator | 0:bb348c97df44 | 136 | #define LL_GPIO_PIN_12 GPIO_BSRR_BS_12 /*!< Select pin 12 */ |
lypinator | 0:bb348c97df44 | 137 | #define LL_GPIO_PIN_13 GPIO_BSRR_BS_13 /*!< Select pin 13 */ |
lypinator | 0:bb348c97df44 | 138 | #define LL_GPIO_PIN_14 GPIO_BSRR_BS_14 /*!< Select pin 14 */ |
lypinator | 0:bb348c97df44 | 139 | #define LL_GPIO_PIN_15 GPIO_BSRR_BS_15 /*!< Select pin 15 */ |
lypinator | 0:bb348c97df44 | 140 | #define LL_GPIO_PIN_ALL (GPIO_BSRR_BS_0 | GPIO_BSRR_BS_1 | GPIO_BSRR_BS_2 | \ |
lypinator | 0:bb348c97df44 | 141 | GPIO_BSRR_BS_3 | GPIO_BSRR_BS_4 | GPIO_BSRR_BS_5 | \ |
lypinator | 0:bb348c97df44 | 142 | GPIO_BSRR_BS_6 | GPIO_BSRR_BS_7 | GPIO_BSRR_BS_8 | \ |
lypinator | 0:bb348c97df44 | 143 | GPIO_BSRR_BS_9 | GPIO_BSRR_BS_10 | GPIO_BSRR_BS_11 | \ |
lypinator | 0:bb348c97df44 | 144 | GPIO_BSRR_BS_12 | GPIO_BSRR_BS_13 | GPIO_BSRR_BS_14 | \ |
lypinator | 0:bb348c97df44 | 145 | GPIO_BSRR_BS_15) /*!< Select all pins */ |
lypinator | 0:bb348c97df44 | 146 | /** |
lypinator | 0:bb348c97df44 | 147 | * @} |
lypinator | 0:bb348c97df44 | 148 | */ |
lypinator | 0:bb348c97df44 | 149 | |
lypinator | 0:bb348c97df44 | 150 | /** @defgroup GPIO_LL_EC_MODE Mode |
lypinator | 0:bb348c97df44 | 151 | * @{ |
lypinator | 0:bb348c97df44 | 152 | */ |
lypinator | 0:bb348c97df44 | 153 | #define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */ |
lypinator | 0:bb348c97df44 | 154 | #define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODER0_0 /*!< Select output mode */ |
lypinator | 0:bb348c97df44 | 155 | #define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODER0_1 /*!< Select alternate function mode */ |
lypinator | 0:bb348c97df44 | 156 | #define LL_GPIO_MODE_ANALOG GPIO_MODER_MODER0 /*!< Select analog mode */ |
lypinator | 0:bb348c97df44 | 157 | /** |
lypinator | 0:bb348c97df44 | 158 | * @} |
lypinator | 0:bb348c97df44 | 159 | */ |
lypinator | 0:bb348c97df44 | 160 | |
lypinator | 0:bb348c97df44 | 161 | /** @defgroup GPIO_LL_EC_OUTPUT Output Type |
lypinator | 0:bb348c97df44 | 162 | * @{ |
lypinator | 0:bb348c97df44 | 163 | */ |
lypinator | 0:bb348c97df44 | 164 | #define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */ |
lypinator | 0:bb348c97df44 | 165 | #define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT_0 /*!< Select open-drain as output type */ |
lypinator | 0:bb348c97df44 | 166 | /** |
lypinator | 0:bb348c97df44 | 167 | * @} |
lypinator | 0:bb348c97df44 | 168 | */ |
lypinator | 0:bb348c97df44 | 169 | |
lypinator | 0:bb348c97df44 | 170 | /** @defgroup GPIO_LL_EC_SPEED Output Speed |
lypinator | 0:bb348c97df44 | 171 | * @{ |
lypinator | 0:bb348c97df44 | 172 | */ |
lypinator | 0:bb348c97df44 | 173 | #define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */ |
lypinator | 0:bb348c97df44 | 174 | #define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDER_OSPEEDR0_0 /*!< Select I/O medium output speed */ |
lypinator | 0:bb348c97df44 | 175 | #define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDER_OSPEEDR0_1 /*!< Select I/O fast output speed */ |
lypinator | 0:bb348c97df44 | 176 | #define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDER_OSPEEDR0 /*!< Select I/O high output speed */ |
lypinator | 0:bb348c97df44 | 177 | /** |
lypinator | 0:bb348c97df44 | 178 | * @} |
lypinator | 0:bb348c97df44 | 179 | */ |
lypinator | 0:bb348c97df44 | 180 | |
lypinator | 0:bb348c97df44 | 181 | /** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down |
lypinator | 0:bb348c97df44 | 182 | * @{ |
lypinator | 0:bb348c97df44 | 183 | */ |
lypinator | 0:bb348c97df44 | 184 | #define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */ |
lypinator | 0:bb348c97df44 | 185 | #define LL_GPIO_PULL_UP GPIO_PUPDR_PUPDR0_0 /*!< Select I/O pull up */ |
lypinator | 0:bb348c97df44 | 186 | #define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPDR0_1 /*!< Select I/O pull down */ |
lypinator | 0:bb348c97df44 | 187 | /** |
lypinator | 0:bb348c97df44 | 188 | * @} |
lypinator | 0:bb348c97df44 | 189 | */ |
lypinator | 0:bb348c97df44 | 190 | |
lypinator | 0:bb348c97df44 | 191 | /** @defgroup GPIO_LL_EC_AF Alternate Function |
lypinator | 0:bb348c97df44 | 192 | * @{ |
lypinator | 0:bb348c97df44 | 193 | */ |
lypinator | 0:bb348c97df44 | 194 | #define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */ |
lypinator | 0:bb348c97df44 | 195 | #define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */ |
lypinator | 0:bb348c97df44 | 196 | #define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */ |
lypinator | 0:bb348c97df44 | 197 | #define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */ |
lypinator | 0:bb348c97df44 | 198 | #define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */ |
lypinator | 0:bb348c97df44 | 199 | #define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */ |
lypinator | 0:bb348c97df44 | 200 | #define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */ |
lypinator | 0:bb348c97df44 | 201 | #define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */ |
lypinator | 0:bb348c97df44 | 202 | #define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */ |
lypinator | 0:bb348c97df44 | 203 | #define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */ |
lypinator | 0:bb348c97df44 | 204 | #define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */ |
lypinator | 0:bb348c97df44 | 205 | #define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */ |
lypinator | 0:bb348c97df44 | 206 | #define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */ |
lypinator | 0:bb348c97df44 | 207 | #define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */ |
lypinator | 0:bb348c97df44 | 208 | #define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */ |
lypinator | 0:bb348c97df44 | 209 | #define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */ |
lypinator | 0:bb348c97df44 | 210 | /** |
lypinator | 0:bb348c97df44 | 211 | * @} |
lypinator | 0:bb348c97df44 | 212 | */ |
lypinator | 0:bb348c97df44 | 213 | |
lypinator | 0:bb348c97df44 | 214 | /** |
lypinator | 0:bb348c97df44 | 215 | * @} |
lypinator | 0:bb348c97df44 | 216 | */ |
lypinator | 0:bb348c97df44 | 217 | |
lypinator | 0:bb348c97df44 | 218 | /* Exported macro ------------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 219 | /** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros |
lypinator | 0:bb348c97df44 | 220 | * @{ |
lypinator | 0:bb348c97df44 | 221 | */ |
lypinator | 0:bb348c97df44 | 222 | |
lypinator | 0:bb348c97df44 | 223 | /** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros |
lypinator | 0:bb348c97df44 | 224 | * @{ |
lypinator | 0:bb348c97df44 | 225 | */ |
lypinator | 0:bb348c97df44 | 226 | |
lypinator | 0:bb348c97df44 | 227 | /** |
lypinator | 0:bb348c97df44 | 228 | * @brief Write a value in GPIO register |
lypinator | 0:bb348c97df44 | 229 | * @param __INSTANCE__ GPIO Instance |
lypinator | 0:bb348c97df44 | 230 | * @param __REG__ Register to be written |
lypinator | 0:bb348c97df44 | 231 | * @param __VALUE__ Value to be written in the register |
lypinator | 0:bb348c97df44 | 232 | * @retval None |
lypinator | 0:bb348c97df44 | 233 | */ |
lypinator | 0:bb348c97df44 | 234 | #define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) |
lypinator | 0:bb348c97df44 | 235 | |
lypinator | 0:bb348c97df44 | 236 | /** |
lypinator | 0:bb348c97df44 | 237 | * @brief Read a value in GPIO register |
lypinator | 0:bb348c97df44 | 238 | * @param __INSTANCE__ GPIO Instance |
lypinator | 0:bb348c97df44 | 239 | * @param __REG__ Register to be read |
lypinator | 0:bb348c97df44 | 240 | * @retval Register value |
lypinator | 0:bb348c97df44 | 241 | */ |
lypinator | 0:bb348c97df44 | 242 | #define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) |
lypinator | 0:bb348c97df44 | 243 | /** |
lypinator | 0:bb348c97df44 | 244 | * @} |
lypinator | 0:bb348c97df44 | 245 | */ |
lypinator | 0:bb348c97df44 | 246 | |
lypinator | 0:bb348c97df44 | 247 | /** |
lypinator | 0:bb348c97df44 | 248 | * @} |
lypinator | 0:bb348c97df44 | 249 | */ |
lypinator | 0:bb348c97df44 | 250 | |
lypinator | 0:bb348c97df44 | 251 | /* Exported functions --------------------------------------------------------*/ |
lypinator | 0:bb348c97df44 | 252 | /** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions |
lypinator | 0:bb348c97df44 | 253 | * @{ |
lypinator | 0:bb348c97df44 | 254 | */ |
lypinator | 0:bb348c97df44 | 255 | |
lypinator | 0:bb348c97df44 | 256 | /** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration |
lypinator | 0:bb348c97df44 | 257 | * @{ |
lypinator | 0:bb348c97df44 | 258 | */ |
lypinator | 0:bb348c97df44 | 259 | |
lypinator | 0:bb348c97df44 | 260 | /** |
lypinator | 0:bb348c97df44 | 261 | * @brief Configure gpio mode for a dedicated pin on dedicated port. |
lypinator | 0:bb348c97df44 | 262 | * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. |
lypinator | 0:bb348c97df44 | 263 | * @note Warning: only one pin can be passed as parameter. |
lypinator | 0:bb348c97df44 | 264 | * @rmtoll MODER MODEy LL_GPIO_SetPinMode |
lypinator | 0:bb348c97df44 | 265 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 266 | * @param Pin This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 267 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 268 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 269 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 270 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 271 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 272 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 273 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 274 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 275 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 276 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 277 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 278 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 279 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 280 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 281 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 282 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 283 | * @param Mode This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 284 | * @arg @ref LL_GPIO_MODE_INPUT |
lypinator | 0:bb348c97df44 | 285 | * @arg @ref LL_GPIO_MODE_OUTPUT |
lypinator | 0:bb348c97df44 | 286 | * @arg @ref LL_GPIO_MODE_ALTERNATE |
lypinator | 0:bb348c97df44 | 287 | * @arg @ref LL_GPIO_MODE_ANALOG |
lypinator | 0:bb348c97df44 | 288 | * @retval None |
lypinator | 0:bb348c97df44 | 289 | */ |
lypinator | 0:bb348c97df44 | 290 | __STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) |
lypinator | 0:bb348c97df44 | 291 | { |
lypinator | 0:bb348c97df44 | 292 | MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U))); |
lypinator | 0:bb348c97df44 | 293 | } |
lypinator | 0:bb348c97df44 | 294 | |
lypinator | 0:bb348c97df44 | 295 | /** |
lypinator | 0:bb348c97df44 | 296 | * @brief Return gpio mode for a dedicated pin on dedicated port. |
lypinator | 0:bb348c97df44 | 297 | * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. |
lypinator | 0:bb348c97df44 | 298 | * @note Warning: only one pin can be passed as parameter. |
lypinator | 0:bb348c97df44 | 299 | * @rmtoll MODER MODEy LL_GPIO_GetPinMode |
lypinator | 0:bb348c97df44 | 300 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 301 | * @param Pin This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 302 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 303 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 304 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 305 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 306 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 307 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 308 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 309 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 310 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 311 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 312 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 313 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 314 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 315 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 316 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 317 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 318 | * @retval Returned value can be one of the following values: |
lypinator | 0:bb348c97df44 | 319 | * @arg @ref LL_GPIO_MODE_INPUT |
lypinator | 0:bb348c97df44 | 320 | * @arg @ref LL_GPIO_MODE_OUTPUT |
lypinator | 0:bb348c97df44 | 321 | * @arg @ref LL_GPIO_MODE_ALTERNATE |
lypinator | 0:bb348c97df44 | 322 | * @arg @ref LL_GPIO_MODE_ANALOG |
lypinator | 0:bb348c97df44 | 323 | */ |
lypinator | 0:bb348c97df44 | 324 | __STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) |
lypinator | 0:bb348c97df44 | 325 | { |
lypinator | 0:bb348c97df44 | 326 | return (uint32_t)(READ_BIT(GPIOx->MODER, |
lypinator | 0:bb348c97df44 | 327 | (GPIO_MODER_MODER0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); |
lypinator | 0:bb348c97df44 | 328 | } |
lypinator | 0:bb348c97df44 | 329 | |
lypinator | 0:bb348c97df44 | 330 | /** |
lypinator | 0:bb348c97df44 | 331 | * @brief Configure gpio output type for several pins on dedicated port. |
lypinator | 0:bb348c97df44 | 332 | * @note Output type as to be set when gpio pin is in output or |
lypinator | 0:bb348c97df44 | 333 | * alternate modes. Possible type are Push-pull or Open-drain. |
lypinator | 0:bb348c97df44 | 334 | * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType |
lypinator | 0:bb348c97df44 | 335 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 336 | * @param PinMask This parameter can be a combination of the following values: |
lypinator | 0:bb348c97df44 | 337 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 338 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 339 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 340 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 341 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 342 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 343 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 344 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 345 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 346 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 347 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 348 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 349 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 350 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 351 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 352 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 353 | * @arg @ref LL_GPIO_PIN_ALL |
lypinator | 0:bb348c97df44 | 354 | * @param OutputType This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 355 | * @arg @ref LL_GPIO_OUTPUT_PUSHPULL |
lypinator | 0:bb348c97df44 | 356 | * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN |
lypinator | 0:bb348c97df44 | 357 | * @retval None |
lypinator | 0:bb348c97df44 | 358 | */ |
lypinator | 0:bb348c97df44 | 359 | __STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) |
lypinator | 0:bb348c97df44 | 360 | { |
lypinator | 0:bb348c97df44 | 361 | MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); |
lypinator | 0:bb348c97df44 | 362 | } |
lypinator | 0:bb348c97df44 | 363 | |
lypinator | 0:bb348c97df44 | 364 | /** |
lypinator | 0:bb348c97df44 | 365 | * @brief Return gpio output type for several pins on dedicated port. |
lypinator | 0:bb348c97df44 | 366 | * @note Output type as to be set when gpio pin is in output or |
lypinator | 0:bb348c97df44 | 367 | * alternate modes. Possible type are Push-pull or Open-drain. |
lypinator | 0:bb348c97df44 | 368 | * @note Warning: only one pin can be passed as parameter. |
lypinator | 0:bb348c97df44 | 369 | * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType |
lypinator | 0:bb348c97df44 | 370 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 371 | * @param Pin This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 372 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 373 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 374 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 375 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 376 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 377 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 378 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 379 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 380 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 381 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 382 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 383 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 384 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 385 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 386 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 387 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 388 | * @arg @ref LL_GPIO_PIN_ALL |
lypinator | 0:bb348c97df44 | 389 | * @retval Returned value can be one of the following values: |
lypinator | 0:bb348c97df44 | 390 | * @arg @ref LL_GPIO_OUTPUT_PUSHPULL |
lypinator | 0:bb348c97df44 | 391 | * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN |
lypinator | 0:bb348c97df44 | 392 | */ |
lypinator | 0:bb348c97df44 | 393 | __STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) |
lypinator | 0:bb348c97df44 | 394 | { |
lypinator | 0:bb348c97df44 | 395 | return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin)); |
lypinator | 0:bb348c97df44 | 396 | } |
lypinator | 0:bb348c97df44 | 397 | |
lypinator | 0:bb348c97df44 | 398 | /** |
lypinator | 0:bb348c97df44 | 399 | * @brief Configure gpio speed for a dedicated pin on dedicated port. |
lypinator | 0:bb348c97df44 | 400 | * @note I/O speed can be Low, Medium, Fast or High speed. |
lypinator | 0:bb348c97df44 | 401 | * @note Warning: only one pin can be passed as parameter. |
lypinator | 0:bb348c97df44 | 402 | * @note Refer to datasheet for frequency specifications and the power |
lypinator | 0:bb348c97df44 | 403 | * supply and load conditions for each speed. |
lypinator | 0:bb348c97df44 | 404 | * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed |
lypinator | 0:bb348c97df44 | 405 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 406 | * @param Pin This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 407 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 408 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 409 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 410 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 411 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 412 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 413 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 414 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 415 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 416 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 417 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 418 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 419 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 420 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 421 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 422 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 423 | * @param Speed This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 424 | * @arg @ref LL_GPIO_SPEED_FREQ_LOW |
lypinator | 0:bb348c97df44 | 425 | * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM |
lypinator | 0:bb348c97df44 | 426 | * @arg @ref LL_GPIO_SPEED_FREQ_HIGH |
lypinator | 0:bb348c97df44 | 427 | * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH |
lypinator | 0:bb348c97df44 | 428 | * @retval None |
lypinator | 0:bb348c97df44 | 429 | */ |
lypinator | 0:bb348c97df44 | 430 | __STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) |
lypinator | 0:bb348c97df44 | 431 | { |
lypinator | 0:bb348c97df44 | 432 | MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U)), |
lypinator | 0:bb348c97df44 | 433 | (Speed << (POSITION_VAL(Pin) * 2U))); |
lypinator | 0:bb348c97df44 | 434 | } |
lypinator | 0:bb348c97df44 | 435 | |
lypinator | 0:bb348c97df44 | 436 | /** |
lypinator | 0:bb348c97df44 | 437 | * @brief Return gpio speed for a dedicated pin on dedicated port. |
lypinator | 0:bb348c97df44 | 438 | * @note I/O speed can be Low, Medium, Fast or High speed. |
lypinator | 0:bb348c97df44 | 439 | * @note Warning: only one pin can be passed as parameter. |
lypinator | 0:bb348c97df44 | 440 | * @note Refer to datasheet for frequency specifications and the power |
lypinator | 0:bb348c97df44 | 441 | * supply and load conditions for each speed. |
lypinator | 0:bb348c97df44 | 442 | * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed |
lypinator | 0:bb348c97df44 | 443 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 444 | * @param Pin This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 445 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 446 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 447 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 448 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 449 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 450 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 451 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 452 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 453 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 454 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 455 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 456 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 457 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 458 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 459 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 460 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 461 | * @retval Returned value can be one of the following values: |
lypinator | 0:bb348c97df44 | 462 | * @arg @ref LL_GPIO_SPEED_FREQ_LOW |
lypinator | 0:bb348c97df44 | 463 | * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM |
lypinator | 0:bb348c97df44 | 464 | * @arg @ref LL_GPIO_SPEED_FREQ_HIGH |
lypinator | 0:bb348c97df44 | 465 | * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH |
lypinator | 0:bb348c97df44 | 466 | */ |
lypinator | 0:bb348c97df44 | 467 | __STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) |
lypinator | 0:bb348c97df44 | 468 | { |
lypinator | 0:bb348c97df44 | 469 | return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, |
lypinator | 0:bb348c97df44 | 470 | (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); |
lypinator | 0:bb348c97df44 | 471 | } |
lypinator | 0:bb348c97df44 | 472 | |
lypinator | 0:bb348c97df44 | 473 | /** |
lypinator | 0:bb348c97df44 | 474 | * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. |
lypinator | 0:bb348c97df44 | 475 | * @note Warning: only one pin can be passed as parameter. |
lypinator | 0:bb348c97df44 | 476 | * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull |
lypinator | 0:bb348c97df44 | 477 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 478 | * @param Pin This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 479 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 480 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 481 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 482 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 483 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 484 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 485 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 486 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 487 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 488 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 489 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 490 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 491 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 492 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 493 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 494 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 495 | * @param Pull This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 496 | * @arg @ref LL_GPIO_PULL_NO |
lypinator | 0:bb348c97df44 | 497 | * @arg @ref LL_GPIO_PULL_UP |
lypinator | 0:bb348c97df44 | 498 | * @arg @ref LL_GPIO_PULL_DOWN |
lypinator | 0:bb348c97df44 | 499 | * @retval None |
lypinator | 0:bb348c97df44 | 500 | */ |
lypinator | 0:bb348c97df44 | 501 | __STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) |
lypinator | 0:bb348c97df44 | 502 | { |
lypinator | 0:bb348c97df44 | 503 | MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U))); |
lypinator | 0:bb348c97df44 | 504 | } |
lypinator | 0:bb348c97df44 | 505 | |
lypinator | 0:bb348c97df44 | 506 | /** |
lypinator | 0:bb348c97df44 | 507 | * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port |
lypinator | 0:bb348c97df44 | 508 | * @note Warning: only one pin can be passed as parameter. |
lypinator | 0:bb348c97df44 | 509 | * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull |
lypinator | 0:bb348c97df44 | 510 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 511 | * @param Pin This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 512 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 513 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 514 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 515 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 516 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 517 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 518 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 519 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 520 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 521 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 522 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 523 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 524 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 525 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 526 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 527 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 528 | * @retval Returned value can be one of the following values: |
lypinator | 0:bb348c97df44 | 529 | * @arg @ref LL_GPIO_PULL_NO |
lypinator | 0:bb348c97df44 | 530 | * @arg @ref LL_GPIO_PULL_UP |
lypinator | 0:bb348c97df44 | 531 | * @arg @ref LL_GPIO_PULL_DOWN |
lypinator | 0:bb348c97df44 | 532 | */ |
lypinator | 0:bb348c97df44 | 533 | __STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) |
lypinator | 0:bb348c97df44 | 534 | { |
lypinator | 0:bb348c97df44 | 535 | return (uint32_t)(READ_BIT(GPIOx->PUPDR, |
lypinator | 0:bb348c97df44 | 536 | (GPIO_PUPDR_PUPDR0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); |
lypinator | 0:bb348c97df44 | 537 | } |
lypinator | 0:bb348c97df44 | 538 | |
lypinator | 0:bb348c97df44 | 539 | /** |
lypinator | 0:bb348c97df44 | 540 | * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. |
lypinator | 0:bb348c97df44 | 541 | * @note Possible values are from AF0 to AF15 depending on target. |
lypinator | 0:bb348c97df44 | 542 | * @note Warning: only one pin can be passed as parameter. |
lypinator | 0:bb348c97df44 | 543 | * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 |
lypinator | 0:bb348c97df44 | 544 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 545 | * @param Pin This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 546 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 547 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 548 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 549 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 550 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 551 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 552 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 553 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 554 | * @param Alternate This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 555 | * @arg @ref LL_GPIO_AF_0 |
lypinator | 0:bb348c97df44 | 556 | * @arg @ref LL_GPIO_AF_1 |
lypinator | 0:bb348c97df44 | 557 | * @arg @ref LL_GPIO_AF_2 |
lypinator | 0:bb348c97df44 | 558 | * @arg @ref LL_GPIO_AF_3 |
lypinator | 0:bb348c97df44 | 559 | * @arg @ref LL_GPIO_AF_4 |
lypinator | 0:bb348c97df44 | 560 | * @arg @ref LL_GPIO_AF_5 |
lypinator | 0:bb348c97df44 | 561 | * @arg @ref LL_GPIO_AF_6 |
lypinator | 0:bb348c97df44 | 562 | * @arg @ref LL_GPIO_AF_7 |
lypinator | 0:bb348c97df44 | 563 | * @arg @ref LL_GPIO_AF_8 |
lypinator | 0:bb348c97df44 | 564 | * @arg @ref LL_GPIO_AF_9 |
lypinator | 0:bb348c97df44 | 565 | * @arg @ref LL_GPIO_AF_10 |
lypinator | 0:bb348c97df44 | 566 | * @arg @ref LL_GPIO_AF_11 |
lypinator | 0:bb348c97df44 | 567 | * @arg @ref LL_GPIO_AF_12 |
lypinator | 0:bb348c97df44 | 568 | * @arg @ref LL_GPIO_AF_13 |
lypinator | 0:bb348c97df44 | 569 | * @arg @ref LL_GPIO_AF_14 |
lypinator | 0:bb348c97df44 | 570 | * @arg @ref LL_GPIO_AF_15 |
lypinator | 0:bb348c97df44 | 571 | * @retval None |
lypinator | 0:bb348c97df44 | 572 | */ |
lypinator | 0:bb348c97df44 | 573 | __STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) |
lypinator | 0:bb348c97df44 | 574 | { |
lypinator | 0:bb348c97df44 | 575 | MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U)), |
lypinator | 0:bb348c97df44 | 576 | (Alternate << (POSITION_VAL(Pin) * 4U))); |
lypinator | 0:bb348c97df44 | 577 | } |
lypinator | 0:bb348c97df44 | 578 | |
lypinator | 0:bb348c97df44 | 579 | /** |
lypinator | 0:bb348c97df44 | 580 | * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. |
lypinator | 0:bb348c97df44 | 581 | * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 |
lypinator | 0:bb348c97df44 | 582 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 583 | * @param Pin This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 584 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 585 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 586 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 587 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 588 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 589 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 590 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 591 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 592 | * @retval Returned value can be one of the following values: |
lypinator | 0:bb348c97df44 | 593 | * @arg @ref LL_GPIO_AF_0 |
lypinator | 0:bb348c97df44 | 594 | * @arg @ref LL_GPIO_AF_1 |
lypinator | 0:bb348c97df44 | 595 | * @arg @ref LL_GPIO_AF_2 |
lypinator | 0:bb348c97df44 | 596 | * @arg @ref LL_GPIO_AF_3 |
lypinator | 0:bb348c97df44 | 597 | * @arg @ref LL_GPIO_AF_4 |
lypinator | 0:bb348c97df44 | 598 | * @arg @ref LL_GPIO_AF_5 |
lypinator | 0:bb348c97df44 | 599 | * @arg @ref LL_GPIO_AF_6 |
lypinator | 0:bb348c97df44 | 600 | * @arg @ref LL_GPIO_AF_7 |
lypinator | 0:bb348c97df44 | 601 | * @arg @ref LL_GPIO_AF_8 |
lypinator | 0:bb348c97df44 | 602 | * @arg @ref LL_GPIO_AF_9 |
lypinator | 0:bb348c97df44 | 603 | * @arg @ref LL_GPIO_AF_10 |
lypinator | 0:bb348c97df44 | 604 | * @arg @ref LL_GPIO_AF_11 |
lypinator | 0:bb348c97df44 | 605 | * @arg @ref LL_GPIO_AF_12 |
lypinator | 0:bb348c97df44 | 606 | * @arg @ref LL_GPIO_AF_13 |
lypinator | 0:bb348c97df44 | 607 | * @arg @ref LL_GPIO_AF_14 |
lypinator | 0:bb348c97df44 | 608 | * @arg @ref LL_GPIO_AF_15 |
lypinator | 0:bb348c97df44 | 609 | */ |
lypinator | 0:bb348c97df44 | 610 | __STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin) |
lypinator | 0:bb348c97df44 | 611 | { |
lypinator | 0:bb348c97df44 | 612 | return (uint32_t)(READ_BIT(GPIOx->AFR[0], |
lypinator | 0:bb348c97df44 | 613 | (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U)); |
lypinator | 0:bb348c97df44 | 614 | } |
lypinator | 0:bb348c97df44 | 615 | |
lypinator | 0:bb348c97df44 | 616 | /** |
lypinator | 0:bb348c97df44 | 617 | * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. |
lypinator | 0:bb348c97df44 | 618 | * @note Possible values are from AF0 to AF15 depending on target. |
lypinator | 0:bb348c97df44 | 619 | * @note Warning: only one pin can be passed as parameter. |
lypinator | 0:bb348c97df44 | 620 | * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 |
lypinator | 0:bb348c97df44 | 621 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 622 | * @param Pin This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 623 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 624 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 625 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 626 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 627 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 628 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 629 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 630 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 631 | * @param Alternate This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 632 | * @arg @ref LL_GPIO_AF_0 |
lypinator | 0:bb348c97df44 | 633 | * @arg @ref LL_GPIO_AF_1 |
lypinator | 0:bb348c97df44 | 634 | * @arg @ref LL_GPIO_AF_2 |
lypinator | 0:bb348c97df44 | 635 | * @arg @ref LL_GPIO_AF_3 |
lypinator | 0:bb348c97df44 | 636 | * @arg @ref LL_GPIO_AF_4 |
lypinator | 0:bb348c97df44 | 637 | * @arg @ref LL_GPIO_AF_5 |
lypinator | 0:bb348c97df44 | 638 | * @arg @ref LL_GPIO_AF_6 |
lypinator | 0:bb348c97df44 | 639 | * @arg @ref LL_GPIO_AF_7 |
lypinator | 0:bb348c97df44 | 640 | * @arg @ref LL_GPIO_AF_8 |
lypinator | 0:bb348c97df44 | 641 | * @arg @ref LL_GPIO_AF_9 |
lypinator | 0:bb348c97df44 | 642 | * @arg @ref LL_GPIO_AF_10 |
lypinator | 0:bb348c97df44 | 643 | * @arg @ref LL_GPIO_AF_11 |
lypinator | 0:bb348c97df44 | 644 | * @arg @ref LL_GPIO_AF_12 |
lypinator | 0:bb348c97df44 | 645 | * @arg @ref LL_GPIO_AF_13 |
lypinator | 0:bb348c97df44 | 646 | * @arg @ref LL_GPIO_AF_14 |
lypinator | 0:bb348c97df44 | 647 | * @arg @ref LL_GPIO_AF_15 |
lypinator | 0:bb348c97df44 | 648 | * @retval None |
lypinator | 0:bb348c97df44 | 649 | */ |
lypinator | 0:bb348c97df44 | 650 | __STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) |
lypinator | 0:bb348c97df44 | 651 | { |
lypinator | 0:bb348c97df44 | 652 | MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U)), |
lypinator | 0:bb348c97df44 | 653 | (Alternate << (POSITION_VAL(Pin >> 8U) * 4U))); |
lypinator | 0:bb348c97df44 | 654 | } |
lypinator | 0:bb348c97df44 | 655 | |
lypinator | 0:bb348c97df44 | 656 | /** |
lypinator | 0:bb348c97df44 | 657 | * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. |
lypinator | 0:bb348c97df44 | 658 | * @note Possible values are from AF0 to AF15 depending on target. |
lypinator | 0:bb348c97df44 | 659 | * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 |
lypinator | 0:bb348c97df44 | 660 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 661 | * @param Pin This parameter can be one of the following values: |
lypinator | 0:bb348c97df44 | 662 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 663 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 664 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 665 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 666 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 667 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 668 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 669 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 670 | * @retval Returned value can be one of the following values: |
lypinator | 0:bb348c97df44 | 671 | * @arg @ref LL_GPIO_AF_0 |
lypinator | 0:bb348c97df44 | 672 | * @arg @ref LL_GPIO_AF_1 |
lypinator | 0:bb348c97df44 | 673 | * @arg @ref LL_GPIO_AF_2 |
lypinator | 0:bb348c97df44 | 674 | * @arg @ref LL_GPIO_AF_3 |
lypinator | 0:bb348c97df44 | 675 | * @arg @ref LL_GPIO_AF_4 |
lypinator | 0:bb348c97df44 | 676 | * @arg @ref LL_GPIO_AF_5 |
lypinator | 0:bb348c97df44 | 677 | * @arg @ref LL_GPIO_AF_6 |
lypinator | 0:bb348c97df44 | 678 | * @arg @ref LL_GPIO_AF_7 |
lypinator | 0:bb348c97df44 | 679 | * @arg @ref LL_GPIO_AF_8 |
lypinator | 0:bb348c97df44 | 680 | * @arg @ref LL_GPIO_AF_9 |
lypinator | 0:bb348c97df44 | 681 | * @arg @ref LL_GPIO_AF_10 |
lypinator | 0:bb348c97df44 | 682 | * @arg @ref LL_GPIO_AF_11 |
lypinator | 0:bb348c97df44 | 683 | * @arg @ref LL_GPIO_AF_12 |
lypinator | 0:bb348c97df44 | 684 | * @arg @ref LL_GPIO_AF_13 |
lypinator | 0:bb348c97df44 | 685 | * @arg @ref LL_GPIO_AF_14 |
lypinator | 0:bb348c97df44 | 686 | * @arg @ref LL_GPIO_AF_15 |
lypinator | 0:bb348c97df44 | 687 | */ |
lypinator | 0:bb348c97df44 | 688 | __STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin) |
lypinator | 0:bb348c97df44 | 689 | { |
lypinator | 0:bb348c97df44 | 690 | return (uint32_t)(READ_BIT(GPIOx->AFR[1], |
lypinator | 0:bb348c97df44 | 691 | (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U))) >> (POSITION_VAL(Pin >> 8U) * 4U)); |
lypinator | 0:bb348c97df44 | 692 | } |
lypinator | 0:bb348c97df44 | 693 | |
lypinator | 0:bb348c97df44 | 694 | |
lypinator | 0:bb348c97df44 | 695 | /** |
lypinator | 0:bb348c97df44 | 696 | * @brief Lock configuration of several pins for a dedicated port. |
lypinator | 0:bb348c97df44 | 697 | * @note When the lock sequence has been applied on a port bit, the |
lypinator | 0:bb348c97df44 | 698 | * value of this port bit can no longer be modified until the |
lypinator | 0:bb348c97df44 | 699 | * next reset. |
lypinator | 0:bb348c97df44 | 700 | * @note Each lock bit freezes a specific configuration register |
lypinator | 0:bb348c97df44 | 701 | * (control and alternate function registers). |
lypinator | 0:bb348c97df44 | 702 | * @rmtoll LCKR LCKK LL_GPIO_LockPin |
lypinator | 0:bb348c97df44 | 703 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 704 | * @param PinMask This parameter can be a combination of the following values: |
lypinator | 0:bb348c97df44 | 705 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 706 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 707 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 708 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 709 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 710 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 711 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 712 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 713 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 714 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 715 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 716 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 717 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 718 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 719 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 720 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 721 | * @arg @ref LL_GPIO_PIN_ALL |
lypinator | 0:bb348c97df44 | 722 | * @retval None |
lypinator | 0:bb348c97df44 | 723 | */ |
lypinator | 0:bb348c97df44 | 724 | __STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) |
lypinator | 0:bb348c97df44 | 725 | { |
lypinator | 0:bb348c97df44 | 726 | __IO uint32_t temp; |
lypinator | 0:bb348c97df44 | 727 | WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); |
lypinator | 0:bb348c97df44 | 728 | WRITE_REG(GPIOx->LCKR, PinMask); |
lypinator | 0:bb348c97df44 | 729 | WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); |
lypinator | 0:bb348c97df44 | 730 | temp = READ_REG(GPIOx->LCKR); |
lypinator | 0:bb348c97df44 | 731 | (void) temp; |
lypinator | 0:bb348c97df44 | 732 | } |
lypinator | 0:bb348c97df44 | 733 | |
lypinator | 0:bb348c97df44 | 734 | /** |
lypinator | 0:bb348c97df44 | 735 | * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. |
lypinator | 0:bb348c97df44 | 736 | * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked |
lypinator | 0:bb348c97df44 | 737 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 738 | * @param PinMask This parameter can be a combination of the following values: |
lypinator | 0:bb348c97df44 | 739 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 740 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 741 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 742 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 743 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 744 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 745 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 746 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 747 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 748 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 749 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 750 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 751 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 752 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 753 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 754 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 755 | * @arg @ref LL_GPIO_PIN_ALL |
lypinator | 0:bb348c97df44 | 756 | * @retval State of bit (1 or 0). |
lypinator | 0:bb348c97df44 | 757 | */ |
lypinator | 0:bb348c97df44 | 758 | __STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) |
lypinator | 0:bb348c97df44 | 759 | { |
lypinator | 0:bb348c97df44 | 760 | return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)); |
lypinator | 0:bb348c97df44 | 761 | } |
lypinator | 0:bb348c97df44 | 762 | |
lypinator | 0:bb348c97df44 | 763 | /** |
lypinator | 0:bb348c97df44 | 764 | * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. |
lypinator | 0:bb348c97df44 | 765 | * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked |
lypinator | 0:bb348c97df44 | 766 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 767 | * @retval State of bit (1 or 0). |
lypinator | 0:bb348c97df44 | 768 | */ |
lypinator | 0:bb348c97df44 | 769 | __STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) |
lypinator | 0:bb348c97df44 | 770 | { |
lypinator | 0:bb348c97df44 | 771 | return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)); |
lypinator | 0:bb348c97df44 | 772 | } |
lypinator | 0:bb348c97df44 | 773 | |
lypinator | 0:bb348c97df44 | 774 | /** |
lypinator | 0:bb348c97df44 | 775 | * @} |
lypinator | 0:bb348c97df44 | 776 | */ |
lypinator | 0:bb348c97df44 | 777 | |
lypinator | 0:bb348c97df44 | 778 | /** @defgroup GPIO_LL_EF_Data_Access Data Access |
lypinator | 0:bb348c97df44 | 779 | * @{ |
lypinator | 0:bb348c97df44 | 780 | */ |
lypinator | 0:bb348c97df44 | 781 | |
lypinator | 0:bb348c97df44 | 782 | /** |
lypinator | 0:bb348c97df44 | 783 | * @brief Return full input data register value for a dedicated port. |
lypinator | 0:bb348c97df44 | 784 | * @rmtoll IDR IDy LL_GPIO_ReadInputPort |
lypinator | 0:bb348c97df44 | 785 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 786 | * @retval Input data register value of port |
lypinator | 0:bb348c97df44 | 787 | */ |
lypinator | 0:bb348c97df44 | 788 | __STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) |
lypinator | 0:bb348c97df44 | 789 | { |
lypinator | 0:bb348c97df44 | 790 | return (uint32_t)(READ_REG(GPIOx->IDR)); |
lypinator | 0:bb348c97df44 | 791 | } |
lypinator | 0:bb348c97df44 | 792 | |
lypinator | 0:bb348c97df44 | 793 | /** |
lypinator | 0:bb348c97df44 | 794 | * @brief Return if input data level for several pins of dedicated port is high or low. |
lypinator | 0:bb348c97df44 | 795 | * @rmtoll IDR IDy LL_GPIO_IsInputPinSet |
lypinator | 0:bb348c97df44 | 796 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 797 | * @param PinMask This parameter can be a combination of the following values: |
lypinator | 0:bb348c97df44 | 798 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 799 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 800 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 801 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 802 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 803 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 804 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 805 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 806 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 807 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 808 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 809 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 810 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 811 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 812 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 813 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 814 | * @arg @ref LL_GPIO_PIN_ALL |
lypinator | 0:bb348c97df44 | 815 | * @retval State of bit (1 or 0). |
lypinator | 0:bb348c97df44 | 816 | */ |
lypinator | 0:bb348c97df44 | 817 | __STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) |
lypinator | 0:bb348c97df44 | 818 | { |
lypinator | 0:bb348c97df44 | 819 | return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask)); |
lypinator | 0:bb348c97df44 | 820 | } |
lypinator | 0:bb348c97df44 | 821 | |
lypinator | 0:bb348c97df44 | 822 | /** |
lypinator | 0:bb348c97df44 | 823 | * @brief Write output data register for the port. |
lypinator | 0:bb348c97df44 | 824 | * @rmtoll ODR ODy LL_GPIO_WriteOutputPort |
lypinator | 0:bb348c97df44 | 825 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 826 | * @param PortValue Level value for each pin of the port |
lypinator | 0:bb348c97df44 | 827 | * @retval None |
lypinator | 0:bb348c97df44 | 828 | */ |
lypinator | 0:bb348c97df44 | 829 | __STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) |
lypinator | 0:bb348c97df44 | 830 | { |
lypinator | 0:bb348c97df44 | 831 | WRITE_REG(GPIOx->ODR, PortValue); |
lypinator | 0:bb348c97df44 | 832 | } |
lypinator | 0:bb348c97df44 | 833 | |
lypinator | 0:bb348c97df44 | 834 | /** |
lypinator | 0:bb348c97df44 | 835 | * @brief Return full output data register value for a dedicated port. |
lypinator | 0:bb348c97df44 | 836 | * @rmtoll ODR ODy LL_GPIO_ReadOutputPort |
lypinator | 0:bb348c97df44 | 837 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 838 | * @retval Output data register value of port |
lypinator | 0:bb348c97df44 | 839 | */ |
lypinator | 0:bb348c97df44 | 840 | __STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) |
lypinator | 0:bb348c97df44 | 841 | { |
lypinator | 0:bb348c97df44 | 842 | return (uint32_t)(READ_REG(GPIOx->ODR)); |
lypinator | 0:bb348c97df44 | 843 | } |
lypinator | 0:bb348c97df44 | 844 | |
lypinator | 0:bb348c97df44 | 845 | /** |
lypinator | 0:bb348c97df44 | 846 | * @brief Return if input data level for several pins of dedicated port is high or low. |
lypinator | 0:bb348c97df44 | 847 | * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet |
lypinator | 0:bb348c97df44 | 848 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 849 | * @param PinMask This parameter can be a combination of the following values: |
lypinator | 0:bb348c97df44 | 850 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 851 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 852 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 853 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 854 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 855 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 856 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 857 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 858 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 859 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 860 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 861 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 862 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 863 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 864 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 865 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 866 | * @arg @ref LL_GPIO_PIN_ALL |
lypinator | 0:bb348c97df44 | 867 | * @retval State of bit (1 or 0). |
lypinator | 0:bb348c97df44 | 868 | */ |
lypinator | 0:bb348c97df44 | 869 | __STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) |
lypinator | 0:bb348c97df44 | 870 | { |
lypinator | 0:bb348c97df44 | 871 | return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask)); |
lypinator | 0:bb348c97df44 | 872 | } |
lypinator | 0:bb348c97df44 | 873 | |
lypinator | 0:bb348c97df44 | 874 | /** |
lypinator | 0:bb348c97df44 | 875 | * @brief Set several pins to high level on dedicated gpio port. |
lypinator | 0:bb348c97df44 | 876 | * @rmtoll BSRR BSy LL_GPIO_SetOutputPin |
lypinator | 0:bb348c97df44 | 877 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 878 | * @param PinMask This parameter can be a combination of the following values: |
lypinator | 0:bb348c97df44 | 879 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 880 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 881 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 882 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 883 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 884 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 885 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 886 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 887 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 888 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 889 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 890 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 891 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 892 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 893 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 894 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 895 | * @arg @ref LL_GPIO_PIN_ALL |
lypinator | 0:bb348c97df44 | 896 | * @retval None |
lypinator | 0:bb348c97df44 | 897 | */ |
lypinator | 0:bb348c97df44 | 898 | __STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) |
lypinator | 0:bb348c97df44 | 899 | { |
lypinator | 0:bb348c97df44 | 900 | WRITE_REG(GPIOx->BSRR, PinMask); |
lypinator | 0:bb348c97df44 | 901 | } |
lypinator | 0:bb348c97df44 | 902 | |
lypinator | 0:bb348c97df44 | 903 | /** |
lypinator | 0:bb348c97df44 | 904 | * @brief Set several pins to low level on dedicated gpio port. |
lypinator | 0:bb348c97df44 | 905 | * @rmtoll BSRR BRy LL_GPIO_ResetOutputPin |
lypinator | 0:bb348c97df44 | 906 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 907 | * @param PinMask This parameter can be a combination of the following values: |
lypinator | 0:bb348c97df44 | 908 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 909 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 910 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 911 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 912 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 913 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 914 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 915 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 916 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 917 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 918 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 919 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 920 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 921 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 922 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 923 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 924 | * @arg @ref LL_GPIO_PIN_ALL |
lypinator | 0:bb348c97df44 | 925 | * @retval None |
lypinator | 0:bb348c97df44 | 926 | */ |
lypinator | 0:bb348c97df44 | 927 | __STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) |
lypinator | 0:bb348c97df44 | 928 | { |
lypinator | 0:bb348c97df44 | 929 | WRITE_REG(GPIOx->BSRR, (PinMask << 16)); |
lypinator | 0:bb348c97df44 | 930 | } |
lypinator | 0:bb348c97df44 | 931 | |
lypinator | 0:bb348c97df44 | 932 | /** |
lypinator | 0:bb348c97df44 | 933 | * @brief Toggle data value for several pin of dedicated port. |
lypinator | 0:bb348c97df44 | 934 | * @rmtoll ODR ODy LL_GPIO_TogglePin |
lypinator | 0:bb348c97df44 | 935 | * @param GPIOx GPIO Port |
lypinator | 0:bb348c97df44 | 936 | * @param PinMask This parameter can be a combination of the following values: |
lypinator | 0:bb348c97df44 | 937 | * @arg @ref LL_GPIO_PIN_0 |
lypinator | 0:bb348c97df44 | 938 | * @arg @ref LL_GPIO_PIN_1 |
lypinator | 0:bb348c97df44 | 939 | * @arg @ref LL_GPIO_PIN_2 |
lypinator | 0:bb348c97df44 | 940 | * @arg @ref LL_GPIO_PIN_3 |
lypinator | 0:bb348c97df44 | 941 | * @arg @ref LL_GPIO_PIN_4 |
lypinator | 0:bb348c97df44 | 942 | * @arg @ref LL_GPIO_PIN_5 |
lypinator | 0:bb348c97df44 | 943 | * @arg @ref LL_GPIO_PIN_6 |
lypinator | 0:bb348c97df44 | 944 | * @arg @ref LL_GPIO_PIN_7 |
lypinator | 0:bb348c97df44 | 945 | * @arg @ref LL_GPIO_PIN_8 |
lypinator | 0:bb348c97df44 | 946 | * @arg @ref LL_GPIO_PIN_9 |
lypinator | 0:bb348c97df44 | 947 | * @arg @ref LL_GPIO_PIN_10 |
lypinator | 0:bb348c97df44 | 948 | * @arg @ref LL_GPIO_PIN_11 |
lypinator | 0:bb348c97df44 | 949 | * @arg @ref LL_GPIO_PIN_12 |
lypinator | 0:bb348c97df44 | 950 | * @arg @ref LL_GPIO_PIN_13 |
lypinator | 0:bb348c97df44 | 951 | * @arg @ref LL_GPIO_PIN_14 |
lypinator | 0:bb348c97df44 | 952 | * @arg @ref LL_GPIO_PIN_15 |
lypinator | 0:bb348c97df44 | 953 | * @arg @ref LL_GPIO_PIN_ALL |
lypinator | 0:bb348c97df44 | 954 | * @retval None |
lypinator | 0:bb348c97df44 | 955 | */ |
lypinator | 0:bb348c97df44 | 956 | __STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) |
lypinator | 0:bb348c97df44 | 957 | { |
lypinator | 0:bb348c97df44 | 958 | WRITE_REG(GPIOx->ODR, READ_REG(GPIOx->ODR) ^ PinMask); |
lypinator | 0:bb348c97df44 | 959 | } |
lypinator | 0:bb348c97df44 | 960 | |
lypinator | 0:bb348c97df44 | 961 | /** |
lypinator | 0:bb348c97df44 | 962 | * @} |
lypinator | 0:bb348c97df44 | 963 | */ |
lypinator | 0:bb348c97df44 | 964 | |
lypinator | 0:bb348c97df44 | 965 | #if defined(USE_FULL_LL_DRIVER) |
lypinator | 0:bb348c97df44 | 966 | /** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions |
lypinator | 0:bb348c97df44 | 967 | * @{ |
lypinator | 0:bb348c97df44 | 968 | */ |
lypinator | 0:bb348c97df44 | 969 | |
lypinator | 0:bb348c97df44 | 970 | ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); |
lypinator | 0:bb348c97df44 | 971 | ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); |
lypinator | 0:bb348c97df44 | 972 | void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); |
lypinator | 0:bb348c97df44 | 973 | |
lypinator | 0:bb348c97df44 | 974 | /** |
lypinator | 0:bb348c97df44 | 975 | * @} |
lypinator | 0:bb348c97df44 | 976 | */ |
lypinator | 0:bb348c97df44 | 977 | #endif /* USE_FULL_LL_DRIVER */ |
lypinator | 0:bb348c97df44 | 978 | |
lypinator | 0:bb348c97df44 | 979 | /** |
lypinator | 0:bb348c97df44 | 980 | * @} |
lypinator | 0:bb348c97df44 | 981 | */ |
lypinator | 0:bb348c97df44 | 982 | |
lypinator | 0:bb348c97df44 | 983 | /** |
lypinator | 0:bb348c97df44 | 984 | * @} |
lypinator | 0:bb348c97df44 | 985 | */ |
lypinator | 0:bb348c97df44 | 986 | |
lypinator | 0:bb348c97df44 | 987 | #endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) */ |
lypinator | 0:bb348c97df44 | 988 | /** |
lypinator | 0:bb348c97df44 | 989 | * @} |
lypinator | 0:bb348c97df44 | 990 | */ |
lypinator | 0:bb348c97df44 | 991 | |
lypinator | 0:bb348c97df44 | 992 | #ifdef __cplusplus |
lypinator | 0:bb348c97df44 | 993 | } |
lypinator | 0:bb348c97df44 | 994 | #endif |
lypinator | 0:bb348c97df44 | 995 | |
lypinator | 0:bb348c97df44 | 996 | #endif /* __STM32F4xx_LL_GPIO_H */ |
lypinator | 0:bb348c97df44 | 997 | |
lypinator | 0:bb348c97df44 | 998 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |