Thomas Lyp
Initial commit
Diff: mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_dcmi.c
- Revision:
- 0:bb348c97df44
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_dcmi.c Wed Sep 16 01:11:49 2020 +0000
@@ -0,0 +1,885 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dcmi.c
+ * @author MCD Application Team
+ * @brief DCMI HAL module driver
+ * This file provides firmware functions to manage the following
+ * functionalities of the Digital Camera Interface (DCMI) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Error functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The sequence below describes how to use this driver to capture image
+ from a camera module connected to the DCMI Interface.
+ This sequence does not take into account the configuration of the
+ camera module, which should be made before to configure and enable
+ the DCMI to capture images.
+
+ (#) Program the required configuration through following parameters:
+ horizontal and vertical polarity, pixel clock polarity, Capture Rate,
+ Synchronization Mode, code of the frame delimiter and data width
+ using HAL_DCMI_Init() function.
+
+ (#) Configure the DMA2_Stream1 channel1 to transfer Data from DCMI DR
+ register to the destination memory buffer.
+
+ (#) Program the required configuration through following parameters:
+ DCMI mode, destination memory Buffer address and the data length
+ and enable capture using HAL_DCMI_Start_DMA() function.
+
+ (#) Optionally, configure and Enable the CROP feature to select a rectangular
+ window from the received image using HAL_DCMI_ConfigCrop()
+ and HAL_DCMI_EnableCROP() functions
+
+ (#) The capture can be stopped using HAL_DCMI_Stop() function.
+
+ (#) To control DCMI state you can use the function HAL_DCMI_GetState().
+
+ *** DCMI HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in DCMI HAL driver.
+
+ (+) __HAL_DCMI_ENABLE: Enable the DCMI peripheral.
+ (+) __HAL_DCMI_DISABLE: Disable the DCMI peripheral.
+ (+) __HAL_DCMI_GET_FLAG: Get the DCMI pending flags.
+ (+) __HAL_DCMI_CLEAR_FLAG: Clear the DCMI pending flags.
+ (+) __HAL_DCMI_ENABLE_IT: Enable the specified DCMI interrupts.
+ (+) __HAL_DCMI_DISABLE_IT: Disable the specified DCMI interrupts.
+ (+) __HAL_DCMI_GET_IT_SOURCE: Check whether the specified DCMI interrupt has occurred or not.
+
+ [..]
+ (@) You can refer to the DCMI HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+/** @defgroup DCMI DCMI
+ * @brief DCMI HAL module driver
+ * @{
+ */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) || defined(STM32F469xx) ||\
+ defined(STM32F479xx)
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define HAL_TIMEOUT_DCMI_STOP 14U /* Set timeout to 1s */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void DCMI_DMAXferCplt(DMA_HandleTypeDef *hdma);
+static void DCMI_DMAError(DMA_HandleTypeDef *hdma);
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup DCMI_Exported_Functions DCMI Exported Functions
+ * @{
+ */
+
+/** @defgroup DCMI_Exported_Functions_Group1 Initialization and Configuration functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the DCMI
+ (+) De-initialize the DCMI
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the DCMI according to the specified
+ * parameters in the DCMI_InitTypeDef and create the associated handle.
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL status
+ */
+__weak HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Check the DCMI peripheral state */
+ if(hdcmi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check function parameters */
+ assert_param(IS_DCMI_ALL_INSTANCE(hdcmi->Instance));
+ assert_param(IS_DCMI_PCKPOLARITY(hdcmi->Init.PCKPolarity));
+ assert_param(IS_DCMI_VSPOLARITY(hdcmi->Init.VSPolarity));
+ assert_param(IS_DCMI_HSPOLARITY(hdcmi->Init.HSPolarity));
+ assert_param(IS_DCMI_SYNCHRO(hdcmi->Init.SynchroMode));
+ assert_param(IS_DCMI_CAPTURE_RATE(hdcmi->Init.CaptureRate));
+ assert_param(IS_DCMI_EXTENDED_DATA(hdcmi->Init.ExtendedDataMode));
+ assert_param(IS_DCMI_MODE_JPEG(hdcmi->Init.JPEGMode));
+
+ if(hdcmi->State == HAL_DCMI_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hdcmi->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_DCMI_MspInit(hdcmi);
+ }
+
+ /* Change the DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+ /* Set DCMI parameters */
+ /* Configures the HS, VS, DE and PC polarity */
+ hdcmi->Instance->CR &= ~(DCMI_CR_PCKPOL | DCMI_CR_HSPOL | DCMI_CR_VSPOL | DCMI_CR_EDM_0 |
+ DCMI_CR_EDM_1 | DCMI_CR_FCRC_0 | DCMI_CR_FCRC_1 | DCMI_CR_JPEG |
+ DCMI_CR_ESS);
+ hdcmi->Instance->CR |= (uint32_t)(hdcmi->Init.SynchroMode | hdcmi->Init.CaptureRate | \
+ hdcmi->Init.VSPolarity | hdcmi->Init.HSPolarity | \
+ hdcmi->Init.PCKPolarity | hdcmi->Init.ExtendedDataMode | \
+ hdcmi->Init.JPEGMode);
+
+ if(hdcmi->Init.SynchroMode == DCMI_SYNCHRO_EMBEDDED)
+ {
+ hdcmi->Instance->ESCR = (((uint32_t)hdcmi->Init.SyncroCode.FrameStartCode) |
+ ((uint32_t)hdcmi->Init.SyncroCode.LineStartCode << DCMI_POSITION_ESCR_LSC)|
+ ((uint32_t)hdcmi->Init.SyncroCode.LineEndCode << DCMI_POSITION_ESCR_LEC) |
+ ((uint32_t)hdcmi->Init.SyncroCode.FrameEndCode << DCMI_POSITION_ESCR_FEC));
+ }
+
+ /* Enable the Line, Vsync, Error and Overrun interrupts */
+ __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_LINE | DCMI_IT_VSYNC | DCMI_IT_ERR | DCMI_IT_OVR);
+
+ /* Update error code */
+ hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE;
+
+ /* Initialize the DCMI state*/
+ hdcmi->State = HAL_DCMI_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deinitializes the DCMI peripheral registers to their default reset
+ * values.
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi)
+{
+ /* DeInit the low level hardware */
+ HAL_DCMI_MspDeInit(hdcmi);
+
+ /* Update error code */
+ hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE;
+
+ /* Initialize the DCMI state*/
+ hdcmi->State = HAL_DCMI_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdcmi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the DCMI MSP.
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval None
+ */
+__weak void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdcmi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the DCMI MSP.
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval None
+ */
+__weak void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdcmi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+/** @defgroup DCMI_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure destination address and data length and
+ Enables DCMI DMA request and enables DCMI capture
+ (+) Stop the DCMI capture.
+ (+) Handles DCMI interrupt request.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables DCMI DMA request and enables DCMI capture
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @param DCMI_Mode DCMI capture mode snapshot or continuous grab.
+ * @param pData The destination memory Buffer address (LCD Frame buffer).
+ * @param Length The length of capture to be transferred.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length)
+{
+ /* Initialize the second memory address */
+ uint32_t SecondMemAddress = 0U;
+
+ /* Check function parameters */
+ assert_param(IS_DCMI_CAPTURE_MODE(DCMI_Mode));
+
+ /* Process Locked */
+ __HAL_LOCK(hdcmi);
+
+ /* Lock the DCMI peripheral state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+ /* Enable DCMI by setting DCMIEN bit */
+ __HAL_DCMI_ENABLE(hdcmi);
+
+ /* Configure the DCMI Mode */
+ hdcmi->Instance->CR &= ~(DCMI_CR_CM);
+ hdcmi->Instance->CR |= (uint32_t)(DCMI_Mode);
+
+ /* Set the DMA memory0 conversion complete callback */
+ hdcmi->DMA_Handle->XferCpltCallback = DCMI_DMAXferCplt;
+
+ /* Set the DMA error callback */
+ hdcmi->DMA_Handle->XferErrorCallback = DCMI_DMAError;
+
+ /* Set the dma abort callback */
+ hdcmi->DMA_Handle->XferAbortCallback = NULL;
+
+ /* Reset transfer counters value */
+ hdcmi->XferCount = 0U;
+ hdcmi->XferTransferNumber = 0U;
+
+ if(Length <= 0xFFFFU)
+ {
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hdcmi->DMA_Handle, (uint32_t)&hdcmi->Instance->DR, (uint32_t)pData, Length);
+ }
+ else /* DCMI_DOUBLE_BUFFER Mode */
+ {
+ /* Set the DMA memory1 conversion complete callback */
+ hdcmi->DMA_Handle->XferM1CpltCallback = DCMI_DMAXferCplt;
+
+ /* Initialize transfer parameters */
+ hdcmi->XferCount = 1U;
+ hdcmi->XferSize = Length;
+ hdcmi->pBuffPtr = pData;
+
+ /* Get the number of buffer */
+ while(hdcmi->XferSize > 0xFFFFU)
+ {
+ hdcmi->XferSize = (hdcmi->XferSize/2U);
+ hdcmi->XferCount = hdcmi->XferCount*2U;
+ }
+
+ /* Update DCMI counter and transfer number*/
+ hdcmi->XferCount = (hdcmi->XferCount - 2U);
+ hdcmi->XferTransferNumber = hdcmi->XferCount;
+
+ /* Update second memory address */
+ SecondMemAddress = (uint32_t)(pData + (4U*hdcmi->XferSize));
+
+ /* Start DMA multi buffer transfer */
+ HAL_DMAEx_MultiBufferStart_IT(hdcmi->DMA_Handle, (uint32_t)&hdcmi->Instance->DR, (uint32_t)pData, SecondMemAddress, hdcmi->XferSize);
+ }
+
+ /* Enable Capture */
+ hdcmi->Instance->CR |= DCMI_CR_CAPTURE;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdcmi);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable DCMI DMA request and Disable DCMI capture
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi)
+{
+ __IO uint32_t count = SystemCoreClock / HAL_TIMEOUT_DCMI_STOP;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdcmi);
+
+ /* Lock the DCMI peripheral state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+ /* Disable Capture */
+ hdcmi->Instance->CR &= ~(DCMI_CR_CAPTURE);
+
+ /* Check if the DCMI capture effectively disabled */
+ do
+ {
+ if (count-- == 0U)
+ {
+ /* Update error code */
+ hdcmi->ErrorCode |= HAL_DCMI_ERROR_TIMEOUT;
+
+ status = HAL_TIMEOUT;
+ }
+ }
+ while((hdcmi->Instance->CR & DCMI_CR_CAPTURE) != 0U);
+
+ /* Disable the DCMI */
+ __HAL_DCMI_DISABLE(hdcmi);
+
+ /* Disable the DMA */
+ HAL_DMA_Abort(hdcmi->DMA_Handle);
+
+ /* Update error code */
+ hdcmi->ErrorCode |= HAL_DCMI_ERROR_NONE;
+
+ /* Change DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdcmi);
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Suspend DCMI capture
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DCMI_Suspend(DCMI_HandleTypeDef* hdcmi)
+{
+ __IO uint32_t count = SystemCoreClock / HAL_TIMEOUT_DCMI_STOP;
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdcmi);
+
+ if(hdcmi->State == HAL_DCMI_STATE_BUSY)
+ {
+ /* Change DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_SUSPENDED;
+
+ /* Disable Capture */
+ hdcmi->Instance->CR &= ~(DCMI_CR_CAPTURE);
+
+ /* Check if the DCMI capture effectively disabled */
+ do
+ {
+ if (count-- == 0U)
+ {
+ /* Update error code */
+ hdcmi->ErrorCode |= HAL_DCMI_ERROR_TIMEOUT;
+
+ /* Change DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_READY;
+
+ status = HAL_TIMEOUT;
+ break;
+ }
+ }
+ while((hdcmi->Instance->CR & DCMI_CR_CAPTURE) != 0);
+ }
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdcmi);
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Resume DCMI capture
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DCMI_Resume(DCMI_HandleTypeDef* hdcmi)
+{
+ /* Process locked */
+ __HAL_LOCK(hdcmi);
+
+ if(hdcmi->State == HAL_DCMI_STATE_SUSPENDED)
+ {
+ /* Change DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+ /* Disable Capture */
+ hdcmi->Instance->CR |= DCMI_CR_CAPTURE;
+ }
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdcmi);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Handles DCMI interrupt request.
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for the DCMI.
+ * @retval None
+ */
+void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi)
+{
+ uint32_t isr_value = READ_REG(hdcmi->Instance->MISR);
+
+ /* Synchronization error interrupt management *******************************/
+ if((isr_value & DCMI_FLAG_ERRRI) == DCMI_FLAG_ERRRI)
+ {
+ /* Clear the Synchronization error flag */
+ __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_ERRRI);
+
+ /* Update error code */
+ hdcmi->ErrorCode |= HAL_DCMI_ERROR_SYNC;
+
+ /* Change DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_ERROR;
+
+ /* Set the synchronization error callback */
+ hdcmi->DMA_Handle->XferAbortCallback = DCMI_DMAError;
+
+ /* Abort the DMA Transfer */
+ HAL_DMA_Abort_IT(hdcmi->DMA_Handle);
+ }
+ /* Overflow interrupt management ********************************************/
+ if((isr_value & DCMI_FLAG_OVRRI) == DCMI_FLAG_OVRRI)
+ {
+ /* Clear the Overflow flag */
+ __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_OVRRI);
+
+ /* Update error code */
+ hdcmi->ErrorCode |= HAL_DCMI_ERROR_OVR;
+
+ /* Change DCMI state */
+ hdcmi->State = HAL_DCMI_STATE_ERROR;
+
+ /* Set the overflow callback */
+ hdcmi->DMA_Handle->XferAbortCallback = DCMI_DMAError;
+
+ /* Abort the DMA Transfer */
+ HAL_DMA_Abort_IT(hdcmi->DMA_Handle);
+ }
+ /* Line Interrupt management ************************************************/
+ if((isr_value & DCMI_FLAG_LINERI) == DCMI_FLAG_LINERI)
+ {
+ /* Clear the Line interrupt flag */
+ __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_LINERI);
+
+ /* Line interrupt Callback */
+ HAL_DCMI_LineEventCallback(hdcmi);
+ }
+ /* VSYNC interrupt management ***********************************************/
+ if((isr_value & DCMI_FLAG_VSYNCRI) == DCMI_FLAG_VSYNCRI)
+ {
+ /* Clear the VSYNC flag */
+ __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_VSYNCRI);
+
+ /* VSYNC Callback */
+ HAL_DCMI_VsyncEventCallback(hdcmi);
+ }
+ /* FRAME interrupt management ***********************************************/
+ if((isr_value & DCMI_FLAG_FRAMERI) == DCMI_FLAG_FRAMERI)
+ {
+ /* When snapshot mode, disable Vsync, Error and Overrun interrupts */
+ if((hdcmi->Instance->CR & DCMI_CR_CM) == DCMI_MODE_SNAPSHOT)
+ {
+ /* Disable the Line, Vsync, Error and Overrun interrupts */
+ __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_LINE | DCMI_IT_VSYNC | DCMI_IT_ERR | DCMI_IT_OVR);
+ }
+
+ /* Disable the Frame interrupt */
+ __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_FRAME);
+
+ /* Frame Callback */
+ HAL_DCMI_FrameEventCallback(hdcmi);
+ }
+}
+
+/**
+ * @brief Error DCMI callback.
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval None
+ */
+__weak void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdcmi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Line Event callback.
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval None
+ */
+__weak void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdcmi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_LineEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief VSYNC Event callback.
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval None
+ */
+__weak void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdcmi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_VsyncEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Frame Event callback.
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval None
+ */
+__weak void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdcmi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DCMI_FrameEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+[..] This section provides functions allowing to:
+ (+) Configure the CROP feature.
+ (+) Enable/Disable the CROP feature.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure the DCMI CROP coordinate.
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @param X0 DCMI window X offset
+ * @param Y0 DCMI window Y offset
+ * @param XSize DCMI Pixel per line
+ * @param YSize DCMI Line number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DCMI_ConfigCrop(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize)
+{
+ /* Process Locked */
+ __HAL_LOCK(hdcmi);
+
+ /* Lock the DCMI peripheral state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_DCMI_WINDOW_COORDINATE(X0));
+ assert_param(IS_DCMI_WINDOW_COORDINATE(YSize));
+ assert_param(IS_DCMI_WINDOW_COORDINATE(XSize));
+ assert_param(IS_DCMI_WINDOW_HEIGHT(Y0));
+
+ /* Configure CROP */
+ hdcmi->Instance->CWSIZER = (XSize | (YSize << DCMI_POSITION_CWSIZE_VLINE));
+ hdcmi->Instance->CWSTRTR = (X0 | (Y0 << DCMI_POSITION_CWSTRT_VST));
+
+ /* Initialize the DCMI state*/
+ hdcmi->State = HAL_DCMI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdcmi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disable the Crop feature.
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DCMI_DisableCrop(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Process Locked */
+ __HAL_LOCK(hdcmi);
+
+ /* Lock the DCMI peripheral state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+ /* Disable DCMI Crop feature */
+ hdcmi->Instance->CR &= ~(uint32_t)DCMI_CR_CROP;
+
+ /* Change the DCMI state*/
+ hdcmi->State = HAL_DCMI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdcmi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the Crop feature.
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DCMI_EnableCrop(DCMI_HandleTypeDef *hdcmi)
+{
+ /* Process Locked */
+ __HAL_LOCK(hdcmi);
+
+ /* Lock the DCMI peripheral state */
+ hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+ /* Enable DCMI Crop feature */
+ hdcmi->Instance->CR |= (uint32_t)DCMI_CR_CROP;
+
+ /* Change the DCMI state*/
+ hdcmi->State = HAL_DCMI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdcmi);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the DCMI state.
+ (+) Get the specific DCMI error flag.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the DCMI state
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval HAL state
+ */
+HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi)
+{
+ return hdcmi->State;
+}
+
+/**
+ * @brief Return the DCMI error code
+ * @param hdcmi pointer to a DCMI_HandleTypeDef structure that contains
+ * the configuration information for DCMI.
+ * @retval DCMI Error Code
+ */
+uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi)
+{
+ return hdcmi->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DCMI_Private_Functions DCMI Private Functions
+ * @{
+ */
+
+/**
+ * @brief DMA conversion complete callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void DCMI_DMAXferCplt(DMA_HandleTypeDef *hdma)
+{
+ uint32_t tmp = 0U;
+
+ DCMI_HandleTypeDef* hdcmi = ( DCMI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ if(hdcmi->XferCount != 0U)
+ {
+ /* Update memory 0 address location */
+ tmp = ((hdcmi->DMA_Handle->Instance->CR) & DMA_SxCR_CT);
+ if(((hdcmi->XferCount % 2U) == 0U) && (tmp != 0U))
+ {
+ tmp = hdcmi->DMA_Handle->Instance->M0AR;
+ HAL_DMAEx_ChangeMemory(hdcmi->DMA_Handle, (tmp + (8U*hdcmi->XferSize)), MEMORY0);
+ hdcmi->XferCount--;
+ }
+ /* Update memory 1 address location */
+ else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) == 0U)
+ {
+ tmp = hdcmi->DMA_Handle->Instance->M1AR;
+ HAL_DMAEx_ChangeMemory(hdcmi->DMA_Handle, (tmp + (8U*hdcmi->XferSize)), MEMORY1);
+ hdcmi->XferCount--;
+ }
+ }
+ /* Update memory 0 address location */
+ else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) != 0U)
+ {
+ hdcmi->DMA_Handle->Instance->M0AR = hdcmi->pBuffPtr;
+ }
+ /* Update memory 1 address location */
+ else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) == 0U)
+ {
+ tmp = hdcmi->pBuffPtr;
+ hdcmi->DMA_Handle->Instance->M1AR = (tmp + (4U*hdcmi->XferSize));
+ hdcmi->XferCount = hdcmi->XferTransferNumber;
+ }
+
+ /* Check if the frame is transferred */
+ if(hdcmi->XferCount == hdcmi->XferTransferNumber)
+ {
+ /* Enable the Frame interrupt */
+ __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_FRAME);
+
+ /* When snapshot mode, set dcmi state to ready */
+ if((hdcmi->Instance->CR & DCMI_CR_CM) == DCMI_MODE_SNAPSHOT)
+ {
+ hdcmi->State= HAL_DCMI_STATE_READY;
+ }
+ }
+}
+
+/**
+ * @brief DMA error callback
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void DCMI_DMAError(DMA_HandleTypeDef *hdma)
+{
+ DCMI_HandleTypeDef* hdcmi = ( DCMI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ if(hdcmi->DMA_Handle->ErrorCode != HAL_DMA_ERROR_FE)
+ {
+ /* Initialize the DCMI state*/
+ hdcmi->State = HAL_DCMI_STATE_READY;
+ }
+
+ /* DCMI error Callback */
+ HAL_DCMI_ErrorCallback(hdcmi);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+ STM32F479xx */
+#endif /* HAL_DCMI_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/