Thomas Lyp
Initial commit
Diff: mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_cryp.c
- Revision:
- 0:bb348c97df44
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_cryp.c Wed Sep 16 01:11:49 2020 +0000
@@ -0,0 +1,5159 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cryp.c
+ * @author MCD Application Team
+ * @brief CRYP HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Cryptography (CRYP) peripheral:
+ * + Initialization and de-initialization functions
+ * + AES processing functions
+ * + DES processing functions
+ * + TDES processing functions
+ * + DMA callback functions
+ * + CRYP IRQ handler management
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The CRYP HAL driver can be used as follows:
+
+ (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit():
+ (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE()
+ (##) In case of using interrupts (e.g. HAL_CRYP_AESECB_Encrypt_IT())
+ (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority()
+ (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ()
+ (+++) In CRYP IRQ handler, call HAL_CRYP_IRQHandler()
+ (##) In case of using DMA to control data transfer (e.g. HAL_CRYP_AESECB_Encrypt_DMA())
+ (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+ (+++) Configure and enable two DMA streams one for managing data transfer from
+ memory to peripheral (input stream) and another stream for managing data
+ transfer from peripheral to memory (output stream)
+ (+++) Associate the initialized DMA handle to the CRYP DMA handle
+ using __HAL_LINKDMA()
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the two DMA Streams. The output stream should have higher
+ priority than the input stream HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+
+ (#)Initialize the CRYP HAL using HAL_CRYP_Init(). This function configures mainly:
+ (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit
+ (##) The key size: 128, 192 and 256. This parameter is relevant only for AES
+ (##) The encryption/decryption key. It's size depends on the algorithm
+ used for encryption/decryption
+ (##) The initialization vector (counter). It is not used ECB mode.
+
+ (#)Three processing (encryption/decryption) functions are available:
+ (##) Polling mode: encryption and decryption APIs are blocking functions
+ i.e. they process the data and wait till the processing is finished,
+ e.g. HAL_CRYP_AESCBC_Encrypt()
+ (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+ i.e. they process the data under interrupt,
+ e.g. HAL_CRYP_AESCBC_Encrypt_IT()
+ (##) DMA mode: encryption and decryption APIs are not blocking functions
+ i.e. the data transfer is ensured by DMA,
+ e.g. HAL_CRYP_AESCBC_Encrypt_DMA()
+
+ (#)When the processing function is called at first time after HAL_CRYP_Init()
+ the CRYP peripheral is initialized and processes the buffer in input.
+ At second call, the processing function performs an append of the already
+ processed buffer.
+ When a new data block is to be processed, call HAL_CRYP_Init() then the
+ processing function.
+
+ (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+
+#if defined(CRYP)
+
+/** @defgroup CRYP CRYP
+ * @brief CRYP HAL module driver.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup CRYP_Private_define
+ * @{
+ */
+#define CRYP_TIMEOUT_VALUE 1U
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup CRYP_Private_Functions_prototypes
+ * @{
+ */
+static void CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector, uint32_t IVSize);
+static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize);
+static HAL_StatusTypeDef CRYP_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout);
+static HAL_StatusTypeDef CRYP_ProcessData2Words(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout);
+static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma);
+static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma);
+static void CRYP_DMAError(DMA_HandleTypeDef *hdma);
+static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr);
+static void CRYP_SetTDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetTDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+/**
+ * @}
+ */
+
+
+/* Private functions ---------------------------------------------------------*/
+
+/** @addtogroup CRYP_Private_Functions
+ * @{
+ */
+
+
+/**
+ * @brief DMA CRYP Input Data process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma)
+{
+ CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Disable the DMA transfer for input FIFO request by resetting the DIEN bit
+ in the DMACR register */
+ hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DIEN);
+
+ /* Call input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+}
+
+/**
+ * @brief DMA CRYP Output Data process complete callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma)
+{
+ CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Disable the DMA transfer for output FIFO request by resetting the DOEN bit
+ in the DMACR register */
+ hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DOEN);
+
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Change the CRYP state to ready */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Call output data transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+}
+
+/**
+ * @brief DMA CRYP communication error callback.
+ * @param hdma DMA handle
+ * @retval None
+ */
+static void CRYP_DMAError(DMA_HandleTypeDef *hdma)
+{
+ CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+ hcryp->State= HAL_CRYP_STATE_READY;
+ HAL_CRYP_ErrorCallback(hcryp);
+}
+
+/**
+ * @brief Writes the Key in Key registers.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Key Pointer to Key buffer
+ * @param KeySize Size of Key
+ * @retval None
+ */
+static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize)
+{
+ uint32_t keyaddr = (uint32_t)Key;
+
+ switch(KeySize)
+ {
+ case CRYP_KEYSIZE_256B:
+ /* Key Initialisation */
+ hcryp->Instance->K0LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K0RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+ break;
+ case CRYP_KEYSIZE_192B:
+ hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+ break;
+ case CRYP_KEYSIZE_128B:
+ hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Writes the InitVector/InitCounter in IV registers.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param InitVector Pointer to InitVector/InitCounter buffer
+ * @param IVSize Size of the InitVector/InitCounter
+ * @retval None
+ */
+static void CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector, uint32_t IVSize)
+{
+ uint32_t ivaddr = (uint32_t)InitVector;
+
+ switch(IVSize)
+ {
+ case CRYP_KEYSIZE_128B:
+ hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IV1LR = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IV1RR = __REV(*(uint32_t*)(ivaddr));
+ break;
+ /* Whatever key size 192 or 256, Init vector is written in IV0LR and IV0RR */
+ case CRYP_KEYSIZE_192B:
+ hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+ break;
+ case CRYP_KEYSIZE_256B:
+ hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Process Data: Writes Input data in polling mode and read the output data
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Input Pointer to the Input buffer
+ * @param Ilength Length of the Input buffer, must be a multiple of 16.
+ * @param Output Pointer to the returned buffer
+ * @param Timeout Timeout value
+ * @retval None
+ */
+static HAL_StatusTypeDef CRYP_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ uint32_t i = 0U;
+ uint32_t inputaddr = (uint32_t)Input;
+ uint32_t outputaddr = (uint32_t)Output;
+
+ for(i=0U; (i < Ilength); i+=16U)
+ {
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Process Data: Write Input data in polling mode.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Input Pointer to the Input buffer
+ * @param Ilength Length of the Input buffer, must be a multiple of 8
+ * @param Output Pointer to the returned buffer
+ * @param Timeout Specify Timeout value
+ * @retval None
+ */
+static HAL_StatusTypeDef CRYP_ProcessData2Words(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ uint32_t i = 0U;
+ uint32_t inputaddr = (uint32_t)Input;
+ uint32_t outputaddr = (uint32_t)Output;
+
+ for(i=0U; (i < Ilength); i+=8U)
+ {
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Set the DMA configuration and start the DMA transfer
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param inputaddr address of the Input buffer
+ * @param Size Size of the Input buffer, must be a multiple of 16.
+ * @param outputaddr address of the Output buffer
+ * @retval None
+ */
+static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr)
+{
+ /* Set the CRYP DMA transfer complete callback */
+ hcryp->hdmain->XferCpltCallback = CRYP_DMAInCplt;
+ /* Set the DMA error callback */
+ hcryp->hdmain->XferErrorCallback = CRYP_DMAError;
+
+ /* Set the CRYP DMA transfer complete callback */
+ hcryp->hdmaout->XferCpltCallback = CRYP_DMAOutCplt;
+ /* Set the DMA error callback */
+ hcryp->hdmaout->XferErrorCallback = CRYP_DMAError;
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Enable the DMA In DMA Stream */
+ HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DR, Size/4U);
+
+ /* Enable In DMA request */
+ hcryp->Instance->DMACR = (CRYP_DMACR_DIEN);
+
+ /* Enable the DMA Out DMA Stream */
+ HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUT, outputaddr, Size/4U);
+
+ /* Enable Out DMA request */
+ hcryp->Instance->DMACR |= CRYP_DMACR_DOEN;
+
+}
+
+/**
+ * @brief Sets the CRYP peripheral in DES ECB mode.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Direction Encryption or decryption
+ * @retval None
+ */
+static void CRYP_SetDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_DES_ECB | Direction);
+
+ /* Set the key */
+ hcryp->Instance->K1LR = __REV(*(uint32_t*)(hcryp->Init.pKey));
+ hcryp->Instance->K1RR = __REV(*(uint32_t*)(hcryp->Init.pKey+4U));
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+}
+
+/**
+ * @brief Sets the CRYP peripheral in DES CBC mode.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Direction Encryption or decryption
+ * @retval None
+ */
+static void CRYP_SetDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_DES_CBC | Direction);
+
+ /* Set the key */
+ hcryp->Instance->K1LR = __REV(*(uint32_t*)(hcryp->Init.pKey));
+ hcryp->Instance->K1RR = __REV(*(uint32_t*)(hcryp->Init.pKey+4U));
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_256B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+}
+
+/**
+ * @brief Sets the CRYP peripheral in TDES ECB mode.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Direction Encryption or decryption
+ * @retval None
+ */
+static void CRYP_SetTDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_TDES_ECB | Direction);
+
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, CRYP_KEYSIZE_192B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+}
+
+/**
+ * @brief Sets the CRYP peripheral in TDES CBC mode
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param Direction Encryption or decryption
+ * @retval None
+ */
+static void CRYP_SetTDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the CRYP peripheral in AES CBC mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_TDES_CBC | Direction);
+
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, CRYP_KEYSIZE_192B);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_256B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+}
+
+/**
+ * @}
+ */
+
+ /* Exported functions --------------------------------------------------------*/
+/** @addtogroup CRYP_Exported_Functions
+ * @{
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the CRYP according to the specified parameters
+ in the CRYP_InitTypeDef and creates the associated handle
+ (+) DeInitialize the CRYP peripheral
+ (+) Initialize the CRYP MSP
+ (+) DeInitialize CRYP MSP
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CRYP according to the specified
+ * parameters in the CRYP_InitTypeDef and creates the associated handle.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp)
+{
+ /* Check the CRYP handle allocation */
+ if(hcryp == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CRYP_KEYSIZE(hcryp->Init.KeySize));
+ assert_param(IS_CRYP_DATATYPE(hcryp->Init.DataType));
+
+ if(hcryp->State == HAL_CRYP_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hcryp->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware */
+ HAL_CRYP_MspInit(hcryp);
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set the key size and data type*/
+ CRYP->CR = (uint32_t) (hcryp->Init.KeySize | hcryp->Init.DataType);
+
+ /* Reset CrypInCount and CrypOutCount */
+ hcryp->CrypInCount = 0U;
+ hcryp->CrypOutCount = 0U;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Set the default CRYP phase */
+ hcryp->Phase = HAL_CRYP_PHASE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the CRYP peripheral.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp)
+{
+ /* Check the CRYP handle allocation */
+ if(hcryp == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set the default CRYP phase */
+ hcryp->Phase = HAL_CRYP_PHASE_READY;
+
+ /* Reset CrypInCount and CrypOutCount */
+ hcryp->CrypInCount = 0U;
+ hcryp->CrypOutCount = 0U;
+
+ /* Disable the CRYP Peripheral Clock */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* DeInit the low level hardware: CLOCK, NVIC.*/
+ HAL_CRYP_MspDeInit(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP MSP.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+__weak void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CRYP_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes CRYP MSP.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+__weak void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CRYP_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group2 AES processing functions
+ * @brief processing functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### AES processing functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Encrypt plaintext using AES-128/192/256 using chaining modes
+ (+) Decrypt cyphertext using AES-128/192/256 using chaining modes
+ [..] Three processing functions are available:
+ (+) Polling mode
+ (+) Interrupt mode
+ (+) DMA mode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CRYP peripheral in AES ECB encryption mode
+ * then encrypt pPlainData. The cypher data are available in pCypherData
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16.
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Timeout Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CBC encryption mode
+ * then encrypt pPlainData. The cypher data are available in pCypherData
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16.
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Timeout Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData(hcryp,pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CTR encryption mode
+ * then encrypt pPlainData. The cypher data are available in pCypherData
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16.
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Timeout Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+
+/**
+ * @brief Initializes the CRYP peripheral in AES ECB decryption mode
+ * then decrypted pCypherData. The cypher data are available in pPlainData
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16.
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Timeout Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES Key mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Reset the ALGOMODE bits*/
+ CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+ /* Set the CRYP peripheral in AES ECB decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES ECB decryption mode
+ * then decrypted pCypherData. The cypher data are available in pPlainData
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16.
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Timeout Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ uint32_t tickstart = 0U;
+
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES Key mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if(Timeout != HAL_MAX_DELAY)
+ {
+ if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Reset the ALGOMODE bits*/
+ CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+ /* Set the CRYP peripheral in AES CBC decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CTR decryption mode
+ * then decrypted pCypherData. The cypher data are available in pPlainData
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16.
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Timeout Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CTR mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES ECB encryption mode using Interrupt.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16 bytes
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Locked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CBC encryption mode using Interrupt.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16 bytes
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CBC mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Locked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CTR encryption mode using Interrupt.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16 bytes
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CTR mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initializes the CRYP peripheral in AES ECB decryption mode using Interrupt.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16.
+ * @param pPlainData Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t tickstart = 0U;
+
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES Key mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset the ALGOMODE bits*/
+ CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+ /* Set the CRYP peripheral in AES ECB decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CBC decryption mode using IT.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16
+ * @param pPlainData Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+
+ uint32_t tickstart = 0U;
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Get the buffer addresses and sizes */
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES Key mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset the ALGOMODE bits*/
+ CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+ /* Set the CRYP peripheral in AES CBC decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CTR decryption mode using Interrupt.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16
+ * @param pPlainData Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Get the buffer addresses and sizes */
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CTR mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES ECB encryption mode using DMA.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16 bytes
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CBC encryption mode using DMA.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16.
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CTR encryption mode using DMA.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16.
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES ECB mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES ECB decryption mode using DMA.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16 bytes
+ * @param pPlainData Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t tickstart = 0U;
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES Key mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset the ALGOMODE bits*/
+ CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+ /* Set the CRYP peripheral in AES ECB decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CBC encryption mode using DMA.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16 bytes
+ * @param pPlainData Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t tickstart = 0U;
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES Key mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+ {
+ /* Change state */
+ hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset the ALGOMODE bits*/
+ CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+ /* Set the CRYP peripheral in AES CBC decryption mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in AES CTR decryption mode using DMA.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16
+ * @param pPlainData Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+ {
+ /* Set the key */
+ CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+ /* Set the CRYP peripheral in AES CTR mode */
+ __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+
+ /* Set the Initialization Vector */
+ CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+ /* Flush FIFO */
+ __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+ /* Set the phase */
+ hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+ }
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group3 DES processing functions
+ * @brief processing functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### DES processing functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Encrypt plaintext using DES using ECB or CBC chaining modes
+ (+) Decrypt cyphertext using ECB or CBC chaining modes
+ [..] Three processing functions are available:
+ (+) Polling mode
+ (+) Interrupt mode
+ (+) DMA mode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB encryption mode.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Timeout Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES ECB encryption mode */
+ CRYP_SetDESECBMode(hcryp, 0U);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB decryption mode.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Timeout Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES ECB decryption mode */
+ CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES CBC encryption mode.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Timeout Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES CBC encryption mode */
+ CRYP_SetDESCBCMode(hcryp, 0U);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB decryption mode.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Timeout Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES CBC decryption mode */
+ CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB encryption mode using IT.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES ECB encryption mode */
+ CRYP_SetDESECBMode(hcryp, 0U);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ /* Disable IT */
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES CBC encryption mode using interrupt.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES CBC encryption mode */
+ CRYP_SetDESCBCMode(hcryp, 0U);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ /* Disable IT */
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB decryption mode using IT.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES ECB decryption mode */
+ CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ /* Disable IT */
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB decryption mode using interrupt.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES CBC decryption mode */
+ CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ /* Disable IT */
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB encryption mode using DMA.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES ECB encryption mode */
+ CRYP_SetDESECBMode(hcryp, 0U);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES CBC encryption mode using DMA.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES CBC encryption mode */
+ CRYP_SetDESCBCMode(hcryp, 0U);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB decryption mode using DMA.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES ECB decryption mode */
+ CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in DES ECB decryption mode using DMA.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in DES CBC decryption mode */
+ CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group4 TDES processing functions
+ * @brief processing functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### TDES processing functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Encrypt plaintext using TDES based on ECB or CBC chaining modes
+ (+) Decrypt cyphertext using TDES based on ECB or CBC chaining modes
+ [..] Three processing functions are available:
+ (+) Polling mode
+ (+) Interrupt mode
+ (+) DMA mode
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES ECB encryption mode
+ * then encrypt pPlainData. The cypher data are available in pCypherData
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Timeout Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES ECB encryption mode */
+ CRYP_SetTDESECBMode(hcryp, 0U);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES ECB decryption mode
+ * then decrypted pCypherData. The cypher data are available in pPlainData
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Timeout Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES ECB decryption mode */
+ CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Cypher Data and Get Plain Data */
+ if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES CBC encryption mode
+ * then encrypt pPlainData. The cypher data are available in pCypherData
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Timeout Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES CBC encryption mode */
+ CRYP_SetTDESCBCMode(hcryp, 0U);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Plain Data and Get Cypher Data */
+ if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES CBC decryption mode
+ * then decrypted pCypherData. The cypher data are available in pPlainData
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Timeout Specify Timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES CBC decryption mode */
+ CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write Cypher Data and Get Plain Data */
+ if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES ECB encryption mode using interrupt.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES ECB encryption mode */
+ CRYP_SetTDESECBMode(hcryp, 0U);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ /* Disable IT */
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call the Output data transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES CBC encryption mode.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pPlainData;
+ hcryp->pCrypOutBuffPtr = pCypherData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES CBC encryption mode */
+ CRYP_SetTDESCBCMode(hcryp, 0U);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES ECB decryption mode.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES ECB decryption mode */
+ CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES CBC decryption mode.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pPlainData Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if(hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ hcryp->CrypInCount = Size;
+ hcryp->pCrypInBuffPtr = pCypherData;
+ hcryp->pCrypOutBuffPtr = pPlainData;
+ hcryp->CrypOutCount = Size;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES CBC decryption mode */
+ CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Enable Interrupts */
+ __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+ /* Enable CRYP */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+ {
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+ /* Write the Input block in the IN FIFO */
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+ hcryp->pCrypInBuffPtr += 8U;
+ hcryp->CrypInCount -= 8U;
+ if(hcryp->CrypInCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+ /* Call the Input data transfer complete callback */
+ HAL_CRYP_InCpltCallback(hcryp);
+ }
+ }
+ else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+ {
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+ /* Read the Output block from the Output FIFO */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+ hcryp->pCrypOutBuffPtr += 8U;
+ hcryp->CrypOutCount -= 8U;
+ if(hcryp->CrypOutCount == 0U)
+ {
+ __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+ /* Call Input transfer complete callback */
+ HAL_CRYP_OutCpltCallback(hcryp);
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES ECB encryption mode using DMA.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES ECB encryption mode */
+ CRYP_SetTDESECBMode(hcryp, 0U);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES CBC encryption mode using DMA.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pPlainData;
+ outputaddr = (uint32_t)pCypherData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES CBC encryption mode */
+ CRYP_SetTDESCBCMode(hcryp, 0U);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES ECB decryption mode using DMA.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES ECB decryption mode */
+ CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Initializes the CRYP peripheral in TDES CBC decryption mode using DMA.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 8
+ * @param pPlainData Pointer to the plaintext buffer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ uint32_t inputaddr;
+ uint32_t outputaddr;
+
+ if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcryp);
+
+ inputaddr = (uint32_t)pCypherData;
+ outputaddr = (uint32_t)pPlainData;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set CRYP peripheral in TDES CBC decryption mode */
+ CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+ /* Set the input and output addresses and start DMA transfer */
+ CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group5 DMA callback functions
+ * @brief DMA callback functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### DMA callback functions #####
+ ==============================================================================
+ [..] This section provides DMA callback functions:
+ (+) DMA Input data transfer complete
+ (+) DMA Output data transfer complete
+ (+) DMA error
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Input FIFO transfer completed callbacks.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+__weak void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CRYP_InCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Output FIFO transfer completed callbacks.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+__weak void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CRYP_OutCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief CRYP error callbacks.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+ __weak void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_CRYP_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group6 CRYP IRQ handler management
+ * @brief CRYP IRQ handler.
+ *
+@verbatim
+ ==============================================================================
+ ##### CRYP IRQ handler management #####
+ ==============================================================================
+[..] This section provides CRYP IRQ handler function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief This function handles CRYP interrupt request.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp)
+{
+ switch(CRYP->CR & CRYP_CR_ALGOMODE_DIRECTION)
+ {
+ case CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT:
+ HAL_CRYP_TDESECB_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT:
+ HAL_CRYP_TDESECB_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT:
+ HAL_CRYP_TDESCBC_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT:
+ HAL_CRYP_TDESCBC_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT:
+ HAL_CRYP_DESECB_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_DES_ECB_DECRYPT:
+ HAL_CRYP_DESECB_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT:
+ HAL_CRYP_DESCBC_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_DES_CBC_DECRYPT:
+ HAL_CRYP_DESCBC_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT:
+ HAL_CRYP_AESECB_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_ECB_DECRYPT:
+ HAL_CRYP_AESECB_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT:
+ HAL_CRYP_AESCBC_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_CBC_DECRYPT:
+ HAL_CRYP_AESCBC_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT:
+ HAL_CRYP_AESCTR_Encrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ case CRYP_CR_ALGOMODE_AES_CTR_DECRYPT:
+ HAL_CRYP_AESCTR_Decrypt_IT(hcryp, NULL, 0U, NULL);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group7 Peripheral State functions
+ * @brief Peripheral State functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the CRYP state.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval HAL state
+ */
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp)
+{
+ return hcryp->State;
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+#endif /* CRYP */
+
+#if defined (AES)
+
+/** @defgroup AES AES
+ * @brief AES HAL module driver.
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private functions --------------------------------------------------------*/
+
+/** @defgroup CRYP_Private_Functions CRYP Private Functions
+ * @{
+ */
+
+static HAL_StatusTypeDef CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp);
+static HAL_StatusTypeDef CRYP_SetKey(CRYP_HandleTypeDef *hcryp);
+static HAL_StatusTypeDef CRYP_AES_IT(CRYP_HandleTypeDef *hcryp);
+
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup CRYP_Exported_Functions CRYP Exported Functions
+ * @{
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group1 Initialization and deinitialization functions
+ * @brief Initialization and Configuration functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and deinitialization functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize the CRYP according to the specified parameters
+ in the CRYP_InitTypeDef and creates the associated handle
+ (+) DeInitialize the CRYP peripheral
+ (+) Initialize the CRYP MSP (MCU Specific Package)
+ (+) De-Initialize the CRYP MSP
+
+ [..]
+ (@) Specific care must be taken to format the key and the Initialization Vector IV!
+
+ [..] If the key is defined as a 128-bit long array key[127..0] = {b127 ... b0} where
+ b127 is the MSB and b0 the LSB, the key must be stored in MCU memory
+ (+) as a sequence of words where the MSB word comes first (occupies the
+ lowest memory address)
+ (+) where each word is byte-swapped:
+ (++) address n+0 : 0b b103 .. b96 b111 .. b104 b119 .. b112 b127 .. b120
+ (++) address n+4 : 0b b71 .. b64 b79 .. b72 b87 .. b80 b95 .. b88
+ (++) address n+8 : 0b b39 .. b32 b47 .. b40 b55 .. b48 b63 .. b56
+ (++) address n+C : 0b b7 .. b0 b15 .. b8 b23 .. b16 b31 .. b24
+ [..] Hereafter, another illustration when considering a 128-bit long key made of 16 bytes {B15..B0}.
+ The 4 32-bit words that make the key must be stored as follows in MCU memory:
+ (+) address n+0 : 0x B12 B13 B14 B15
+ (+) address n+4 : 0x B8 B9 B10 B11
+ (+) address n+8 : 0x B4 B5 B6 B7
+ (+) address n+C : 0x B0 B1 B2 B3
+ [..] which leads to the expected setting
+ (+) AES_KEYR3 = 0x B15 B14 B13 B12
+ (+) AES_KEYR2 = 0x B11 B10 B9 B8
+ (+) AES_KEYR1 = 0x B7 B6 B5 B4
+ (+) AES_KEYR0 = 0x B3 B2 B1 B0
+
+ [..] Same format must be applied for a 256-bit long key made of 32 bytes {B31..B0}.
+ The 8 32-bit words that make the key must be stored as follows in MCU memory:
+ (+) address n+00 : 0x B28 B29 B30 B31
+ (+) address n+04 : 0x B24 B25 B26 B27
+ (+) address n+08 : 0x B20 B21 B22 B23
+ (+) address n+0C : 0x B16 B17 B18 B19
+ (+) address n+10 : 0x B12 B13 B14 B15
+ (+) address n+14 : 0x B8 B9 B10 B11
+ (+) address n+18 : 0x B4 B5 B6 B7
+ (+) address n+1C : 0x B0 B1 B2 B3
+ [..] which leads to the expected setting
+ (+) AES_KEYR7 = 0x B31 B30 B29 B28
+ (+) AES_KEYR6 = 0x B27 B26 B25 B24
+ (+) AES_KEYR5 = 0x B23 B22 B21 B20
+ (+) AES_KEYR4 = 0x B19 B18 B17 B16
+ (+) AES_KEYR3 = 0x B15 B14 B13 B12
+ (+) AES_KEYR2 = 0x B11 B10 B9 B8
+ (+) AES_KEYR1 = 0x B7 B6 B5 B4
+ (+) AES_KEYR0 = 0x B3 B2 B1 B0
+
+ [..] Initialization Vector IV (4 32-bit words) format must follow the same as
+ that of a 128-bit long key.
+
+ [..]
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the CRYP according to the specified
+ * parameters in the CRYP_InitTypeDef and initialize the associated handle.
+ * @note Specific care must be taken to format the key and the Initialization Vector IV
+ * stored in the MCU memory before calling HAL_CRYP_Init(). Refer to explanations
+ * hereabove.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp)
+{
+ /* Check the CRYP handle allocation */
+ if(hcryp == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the instance */
+ assert_param(IS_AES_ALL_INSTANCE(hcryp->Instance));
+
+ /* Check the parameters */
+ assert_param(IS_CRYP_KEYSIZE(hcryp->Init.KeySize));
+ assert_param(IS_CRYP_DATATYPE(hcryp->Init.DataType));
+ assert_param(IS_CRYP_ALGOMODE(hcryp->Init.OperatingMode));
+ /* ChainingMode parameter is irrelevant when mode is set to Key derivation */
+ if (hcryp->Init.OperatingMode != CRYP_ALGOMODE_KEYDERIVATION)
+ {
+ assert_param(IS_CRYP_CHAINMODE(hcryp->Init.ChainingMode));
+ }
+ assert_param(IS_CRYP_WRITE(hcryp->Init.KeyWriteFlag));
+
+ /*========================================================*/
+ /* Check the proper operating/chaining modes combinations */
+ /*========================================================*/
+ /* Check the proper chaining when the operating mode is key derivation and decryption */
+#if defined(AES_CR_NPBLB)
+ if ((hcryp->Init.OperatingMode == CRYP_ALGOMODE_KEYDERIVATION_DECRYPT) &&\
+ ((hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_CTR) \
+ || (hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_GCM_GMAC) \
+ || (hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_CCM_CMAC)))
+#else
+ if ((hcryp->Init.OperatingMode == CRYP_ALGOMODE_KEYDERIVATION_DECRYPT) &&\
+ ((hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_CTR) \
+ || (hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_GCM_GMAC) \
+ || (hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_CMAC)))
+#endif
+ {
+ return HAL_ERROR;
+ }
+ /* Check that key derivation is not set in CMAC mode or CCM mode when applicable */
+#if defined(AES_CR_NPBLB)
+ if ((hcryp->Init.OperatingMode == CRYP_ALGOMODE_KEYDERIVATION)
+ && (hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_CCM_CMAC))
+#else
+ if ((hcryp->Init.OperatingMode == CRYP_ALGOMODE_KEYDERIVATION)
+ && (hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_CMAC))
+#endif
+ {
+ return HAL_ERROR;
+ }
+
+
+ /*================*/
+ /* Initialization */
+ /*================*/
+ /* Initialization start */
+ if(hcryp->State == HAL_CRYP_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hcryp->Lock = HAL_UNLOCKED;
+
+ /* Init the low level hardware */
+ HAL_CRYP_MspInit(hcryp);
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_CRYP_DISABLE();
+
+ /*=============================================================*/
+ /* AES initialization common to all operating modes */
+ /*=============================================================*/
+ /* Set the Key size selection */
+ MODIFY_REG(hcryp->Instance->CR, AES_CR_KEYSIZE, hcryp->Init.KeySize);
+
+ /* Set the default CRYP phase when this parameter is not used.
+ Phase is updated below in case of GCM/GMAC/CMAC(/CCM) setting. */
+ hcryp->Phase = HAL_CRYP_PHASE_NOT_USED;
+
+
+
+ /*=============================================================*/
+ /* Carry on the initialization based on the AES operating mode */
+ /*=============================================================*/
+ /* Key derivation */
+ if (hcryp->Init.OperatingMode == CRYP_ALGOMODE_KEYDERIVATION)
+ {
+ MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_ALGOMODE_KEYDERIVATION);
+
+ /* Configure the Key registers */
+ if (CRYP_SetKey(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ /* Encryption / Decryption (with or without key derivation) / authentication */
+ {
+ /* Set data type, operating and chaining modes.
+ In case of GCM or GMAC, data type is forced to 0b00 */
+ if (hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_GCM_GMAC)
+ {
+ MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE|AES_CR_MODE|AES_CR_CHMOD, hcryp->Init.OperatingMode|hcryp->Init.ChainingMode);
+ }
+ else
+ {
+ MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE|AES_CR_MODE|AES_CR_CHMOD, hcryp->Init.DataType|hcryp->Init.OperatingMode|hcryp->Init.ChainingMode);
+ }
+
+
+ /* Specify the encryption/decryption phase in case of Galois counter mode (GCM),
+ Galois message authentication code (GMAC), cipher message authentication code (CMAC)
+ or Counter with Cipher Mode (CCM) when applicable */
+#if defined(AES_CR_NPBLB)
+ if ((hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_GCM_GMAC)
+ || (hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_CCM_CMAC))
+#else
+ if ((hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_GCM_GMAC)
+ || (hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_CMAC))
+#endif
+ {
+ MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, hcryp->Init.GCMCMACPhase);
+ hcryp->Phase = HAL_CRYP_PHASE_START;
+ }
+
+
+ /* Configure the Key registers if no need to bypass this step */
+ if (hcryp->Init.KeyWriteFlag == CRYP_KEY_WRITE_ENABLE)
+ {
+ if (CRYP_SetKey(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* If applicable, configure the Initialization Vector */
+ if (hcryp->Init.ChainingMode != CRYP_CHAINMODE_AES_ECB)
+ {
+ if (CRYP_SetInitVector(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ }
+ }
+
+#if defined(AES_CR_NPBLB)
+ /* Clear NPBLB field */
+ CLEAR_BIT(hcryp->Instance->CR, AES_CR_NPBLB);
+#endif
+
+ /* Reset CrypInCount and CrypOutCount */
+ hcryp->CrypInCount = 0U;
+ hcryp->CrypOutCount = 0U;
+
+ /* Reset ErrorCode field */
+ hcryp->ErrorCode = HAL_CRYP_ERROR_NONE;
+
+ /* Reset Mode suspension request */
+ hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE;
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Enable the Peripheral */
+ __HAL_CRYP_ENABLE();
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the CRYP peripheral.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp)
+{
+ /* Check the CRYP handle allocation */
+ if(hcryp == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Set the default CRYP phase */
+ hcryp->Phase = HAL_CRYP_PHASE_READY;
+
+ /* Reset CrypInCount and CrypOutCount */
+ hcryp->CrypInCount = 0U;
+ hcryp->CrypOutCount = 0U;
+
+ /* Disable the CRYP Peripheral Clock */
+ __HAL_CRYP_DISABLE();
+
+ /* DeInit the low level hardware: CLOCK, NVIC.*/
+ HAL_CRYP_MspDeInit(hcryp);
+
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hcryp);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the CRYP MSP.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+__weak void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+
+ /* NOTE : This function should not be modified; when the callback is needed,
+ the HAL_CRYP_MspInit can be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitialize CRYP MSP.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+__weak void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+
+ /* NOTE : This function should not be modified; when the callback is needed,
+ the HAL_CRYP_MspDeInit can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group2 AES processing functions
+ * @brief Processing functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### AES processing functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to:
+ (+) Encrypt plaintext using AES algorithm in different chaining modes
+ (+) Decrypt cyphertext using AES algorithm in different chaining modes
+ [..] Three processing functions are available:
+ (+) Polling mode
+ (+) Interrupt mode
+ (+) DMA mode
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Encrypt pPlainData in AES ECB encryption mode. The cypher data are available in pCypherData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Timeout Specify Timeout value
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES() API instead (usage recommended).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_ENCRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_ECB;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES(hcryp, pPlainData, Size, pCypherData, Timeout);
+}
+
+
+/**
+ * @brief Encrypt pPlainData in AES CBC encryption mode with key derivation. The cypher data are available in pCypherData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Timeout Specify Timeout value
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES() API instead (usage recommended).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_ENCRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_CBC;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES(hcryp, pPlainData, Size, pCypherData, Timeout);
+}
+
+
+/**
+ * @brief Encrypt pPlainData in AES CTR encryption mode. The cypher data are available in pCypherData
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Timeout Specify Timeout value
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES() API instead (usage recommended).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_ENCRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_CTR;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES(hcryp, pPlainData, Size, pCypherData, Timeout);
+}
+
+/**
+ * @brief Decrypt pCypherData in AES ECB decryption mode with key derivation,
+ * the decyphered data are available in pPlainData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Timeout Specify Timeout value
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES() API instead (usage recommended).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_KEYDERIVATION_DECRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_ECB;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES(hcryp, pCypherData, Size, pPlainData, Timeout);
+}
+
+/**
+ * @brief Decrypt pCypherData in AES ECB decryption mode with key derivation,
+ * the decyphered data are available in pPlainData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Timeout Specify Timeout value
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES() API instead (usage recommended).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_KEYDERIVATION_DECRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_CBC;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES(hcryp, pCypherData, Size, pPlainData, Timeout);
+}
+
+/**
+ * @brief Decrypt pCypherData in AES CTR decryption mode,
+ * the decyphered data are available in pPlainData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Timeout Specify Timeout value
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES() API instead (usage recommended).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_DECRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_CTR;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES(hcryp, pCypherData, Size, pPlainData, Timeout);
+}
+
+/**
+ * @brief Encrypt pPlainData in AES ECB encryption mode using Interrupt,
+ * the cypher data are available in pCypherData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES_IT() API instead (usage recommended).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_ENCRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_ECB;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES_IT(hcryp, pPlainData, Size, pCypherData);
+}
+
+/**
+ * @brief Encrypt pPlainData in AES CBC encryption mode using Interrupt,
+ * the cypher data are available in pCypherData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES_IT() API instead (usage recommended).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_ENCRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_CBC;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES_IT(hcryp, pPlainData, Size, pCypherData);
+}
+
+
+/**
+ * @brief Encrypt pPlainData in AES CTR encryption mode using Interrupt,
+ * the cypher data are available in pCypherData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES_IT() API instead (usage recommended).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_ENCRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_CTR;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES_IT(hcryp, pPlainData, Size, pCypherData);
+}
+
+/**
+ * @brief Decrypt pCypherData in AES ECB decryption mode using Interrupt,
+ * the decyphered data are available in pPlainData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pPlainData Pointer to the plaintext buffer.
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES_IT() API instead (usage recommended).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_KEYDERIVATION_DECRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_ECB;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES_IT(hcryp, pCypherData, Size, pPlainData);
+}
+
+/**
+ * @brief Decrypt pCypherData in AES CBC decryption mode using Interrupt,
+ * the decyphered data are available in pPlainData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pPlainData Pointer to the plaintext buffer
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES_IT() API instead (usage recommended).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_KEYDERIVATION_DECRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_CBC;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES_IT(hcryp, pCypherData, Size, pPlainData);
+}
+
+/**
+ * @brief Decrypt pCypherData in AES CTR decryption mode using Interrupt,
+ * the decyphered data are available in pPlainData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pPlainData Pointer to the plaintext buffer
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES_IT() API instead (usage recommended).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_DECRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_CTR;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES_IT(hcryp, pCypherData, Size, pPlainData);
+}
+
+/**
+ * @brief Encrypt pPlainData in AES ECB encryption mode using DMA,
+ * the cypher data are available in pCypherData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES_DMA() API instead (usage recommended).
+ * @note pPlainData and pCypherData buffers must be 32-bit aligned to ensure a correct DMA transfer to and from the IP.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_ENCRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_ECB;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES_DMA(hcryp, pPlainData, Size, pCypherData);
+}
+
+
+
+/**
+ * @brief Encrypt pPlainData in AES CBC encryption mode using DMA,
+ * the cypher data are available in pCypherData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer, must be a multiple of 16.
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES_DMA() API instead (usage recommended).
+ * @note pPlainData and pCypherData buffers must be 32-bit aligned to ensure a correct DMA transfer to and from the IP.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_ENCRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_CBC;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES_DMA(hcryp, pPlainData, Size, pCypherData);
+}
+
+/**
+ * @brief Encrypt pPlainData in AES CTR encryption mode using DMA,
+ * the cypher data are available in pCypherData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pPlainData Pointer to the plaintext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pCypherData Pointer to the cyphertext buffer.
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES_DMA() API instead (usage recommended).
+ * @note pPlainData and pCypherData buffers must be 32-bit aligned to ensure a correct DMA transfer to and from the IP.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_ENCRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_CTR;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES_DMA(hcryp, pPlainData, Size, pCypherData);
+}
+
+/**
+ * @brief Decrypt pCypherData in AES ECB decryption mode using DMA,
+ * the decyphered data are available in pPlainData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pPlainData Pointer to the plaintext buffer
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES_DMA() API instead (usage recommended).
+ * @note pPlainData and pCypherData buffers must be 32-bit aligned to ensure a correct DMA transfer to and from the IP.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_KEYDERIVATION_DECRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_ECB;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES_DMA(hcryp, pCypherData, Size, pPlainData);
+}
+
+/**
+ * @brief Decrypt pCypherData in AES CBC decryption mode using DMA,
+ * the decyphered data are available in pPlainData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pPlainData Pointer to the plaintext buffer
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES_DMA() API instead (usage recommended).
+ * @note pPlainData and pCypherData buffers must be 32-bit aligned to ensure a correct DMA transfer to and from the IP.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_KEYDERIVATION_DECRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_CBC;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES_DMA(hcryp, pCypherData, Size, pPlainData);
+}
+
+/**
+ * @brief Decrypt pCypherData in AES CTR decryption mode using DMA,
+ * the decyphered data are available in pPlainData.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param pCypherData Pointer to the cyphertext buffer
+ * @param Size Length of the plaintext buffer in bytes, must be a multiple of 16.
+ * @param pPlainData Pointer to the plaintext buffer
+ * @note This API is provided only to maintain compatibility with legacy software. Users should directly
+ * resort to generic HAL_CRYPEx_AES_DMA() API instead (usage recommended).
+ * @note pPlainData and pCypherData buffers must be 32-bit aligned to ensure a correct DMA transfer to and from the IP.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+ /* Re-initialize AES IP with proper parameters */
+ if (HAL_CRYP_DeInit(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ hcryp->Init.OperatingMode = CRYP_ALGOMODE_DECRYPT;
+ hcryp->Init.ChainingMode = CRYP_CHAINMODE_AES_CTR;
+ hcryp->Init.KeyWriteFlag = CRYP_KEY_WRITE_ENABLE;
+ if (HAL_CRYP_Init(hcryp) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_CRYPEx_AES_DMA(hcryp, pCypherData, Size, pPlainData);
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group3 Callback functions
+ * @brief Callback functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Callback functions #####
+ ==============================================================================
+ [..] This section provides Interruption and DMA callback functions:
+ (+) DMA Input data transfer complete
+ (+) DMA Output data transfer complete
+ (+) DMA or Interrupt error
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief CRYP error callback.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+__weak void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+
+ /* NOTE : This function should not be modified; when the callback is needed,
+ the HAL_CRYP_ErrorCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Input DMA transfer complete callback.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+__weak void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+
+ /* NOTE : This function should not be modified; when the callback is needed,
+ the HAL_CRYP_InCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Output DMA transfer complete callback.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+__weak void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcryp);
+
+ /* NOTE : This function should not be modified; when the callback is needed,
+ the HAL_CRYP_OutCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group4 CRYP IRQ handler
+ * @brief AES IRQ handler.
+ *
+@verbatim
+ ==============================================================================
+ ##### AES IRQ handler management #####
+ ==============================================================================
+[..] This section provides AES IRQ handler function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Handle AES interrupt request.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp)
+{
+ /* Check if error occurred */
+ if (__HAL_CRYP_GET_IT_SOURCE(CRYP_IT_ERRIE) != RESET)
+ {
+ /* If Write Error occurred */
+ if (__HAL_CRYP_GET_FLAG(CRYP_IT_WRERR) != RESET)
+ {
+ hcryp->ErrorCode |= HAL_CRYP_WRITE_ERROR;
+ hcryp->State = HAL_CRYP_STATE_ERROR;
+ }
+ /* If Read Error occurred */
+ if (__HAL_CRYP_GET_FLAG(CRYP_IT_RDERR) != RESET)
+ {
+ hcryp->ErrorCode |= HAL_CRYP_READ_ERROR;
+ hcryp->State = HAL_CRYP_STATE_ERROR;
+ }
+
+ /* If an error has been reported */
+ if (hcryp->State == HAL_CRYP_STATE_ERROR)
+ {
+ /* Disable Error and Computation Complete Interrupts */
+ __HAL_CRYP_DISABLE_IT(CRYP_IT_CCFIE|CRYP_IT_ERRIE);
+ /* Clear all Interrupt flags */
+ __HAL_CRYP_CLEAR_FLAG(CRYP_ERR_CLEAR|CRYP_CCF_CLEAR);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ HAL_CRYP_ErrorCallback(hcryp);
+
+ return;
+ }
+ }
+
+ /* Check if computation complete interrupt is enabled
+ and if the computation complete flag is raised */
+ if((__HAL_CRYP_GET_FLAG(CRYP_IT_CCF) != RESET) && (__HAL_CRYP_GET_IT_SOURCE(CRYP_IT_CCFIE) != RESET))
+ {
+#if defined(AES_CR_NPBLB)
+ if ((hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_GCM_GMAC)
+ || (hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_CCM_CMAC))
+#else
+ if ((hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_GCM_GMAC)
+ || (hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_CMAC))
+#endif
+ {
+ /* To ensure proper suspension requests management, CCF flag
+ is reset in CRYP_AES_Auth_IT() according to the current
+ phase under handling */
+ CRYP_AES_Auth_IT(hcryp);
+ }
+ else
+ {
+ /* Clear Computation Complete Flag */
+ __HAL_CRYP_CLEAR_FLAG(CRYP_CCF_CLEAR);
+ CRYP_AES_IT(hcryp);
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Functions_Group5 Peripheral State functions
+ * @brief Peripheral State functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the CRYP handle state.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval HAL state
+ */
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp)
+{
+ /* Return CRYP handle state */
+ return hcryp->State;
+}
+
+/**
+ * @brief Return the CRYP peripheral error.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @note The returned error is a bit-map combination of possible errors
+ * @retval Error bit-map
+ */
+uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp)
+{
+ return hcryp->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Private_Functions
+ * @{
+ */
+
+
+/**
+ * @brief Write the Key in KeyRx registers.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+static HAL_StatusTypeDef CRYP_SetKey(CRYP_HandleTypeDef *hcryp)
+{
+ uint32_t keyaddr = 0x0U;
+
+ if ((uint32_t)(hcryp->Init.pKey == NULL))
+ {
+ return HAL_ERROR;
+ }
+
+
+ keyaddr = (uint32_t)(hcryp->Init.pKey);
+
+ if (hcryp->Init.KeySize == CRYP_KEYSIZE_256B)
+ {
+ hcryp->Instance->KEYR7 = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->KEYR6 = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->KEYR5 = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->KEYR4 = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ }
+
+ hcryp->Instance->KEYR3 = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->KEYR2 = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->KEYR1 = __REV(*(uint32_t*)(keyaddr));
+ keyaddr+=4U;
+ hcryp->Instance->KEYR0 = __REV(*(uint32_t*)(keyaddr));
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Write the InitVector/InitCounter in IVRx registers.
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @retval None
+ */
+static HAL_StatusTypeDef CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp)
+{
+ uint32_t ivaddr = 0x0U;
+
+#if !defined(AES_CR_NPBLB)
+ if (hcryp->Init.ChainingMode == CRYP_CHAINMODE_AES_CMAC)
+ {
+ hcryp->Instance->IVR3 = 0U;
+ hcryp->Instance->IVR2 = 0U;
+ hcryp->Instance->IVR1 = 0U;
+ hcryp->Instance->IVR0 = 0U;
+ }
+ else
+#endif
+ {
+ if (hcryp->Init.pInitVect == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ ivaddr = (uint32_t)(hcryp->Init.pInitVect);
+
+ hcryp->Instance->IVR3 = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IVR2 = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IVR1 = __REV(*(uint32_t*)(ivaddr));
+ ivaddr+=4U;
+ hcryp->Instance->IVR0 = __REV(*(uint32_t*)(ivaddr));
+ }
+ return HAL_OK;
+}
+
+
+
+/**
+ * @brief Handle CRYP block input/output data handling under interruption.
+ * @note The function is called under interruption only, once
+ * interruptions have been enabled by HAL_CRYPEx_AES_IT().
+ * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef CRYP_AES_IT(CRYP_HandleTypeDef *hcryp)
+{
+ uint32_t inputaddr = 0U;
+ uint32_t outputaddr = 0U;
+
+ if(hcryp->State == HAL_CRYP_STATE_BUSY)
+ {
+ if (hcryp->Init.OperatingMode != CRYP_ALGOMODE_KEYDERIVATION)
+ {
+ /* Get the output data address */
+ outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+
+ /* Read the last available output block from the Data Output Register */
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUTR;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUTR;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUTR;
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = hcryp->Instance->DOUTR;
+ hcryp->pCrypOutBuffPtr += 16U;
+ hcryp->CrypOutCount -= 16U;
+
+ }
+ else
+ {
+ /* Read the derived key from the Key registers */
+ if (hcryp->Init.KeySize == CRYP_KEYSIZE_256B)
+ {
+ *(uint32_t*)(outputaddr) = __REV(hcryp->Instance->KEYR7);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(hcryp->Instance->KEYR6);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(hcryp->Instance->KEYR5);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(hcryp->Instance->KEYR4);
+ outputaddr+=4U;
+ }
+
+ *(uint32_t*)(outputaddr) = __REV(hcryp->Instance->KEYR3);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(hcryp->Instance->KEYR2);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(hcryp->Instance->KEYR1);
+ outputaddr+=4U;
+ *(uint32_t*)(outputaddr) = __REV(hcryp->Instance->KEYR0);
+ }
+
+ /* In case of ciphering or deciphering, check if all output text has been retrieved;
+ In case of key derivation, stop right there */
+ if ((hcryp->CrypOutCount == 0U) || (hcryp->Init.OperatingMode == CRYP_ALGOMODE_KEYDERIVATION))
+ {
+ /* Disable Computation Complete Flag and Errors Interrupts */
+ __HAL_CRYP_DISABLE_IT(CRYP_IT_CCFIE|CRYP_IT_ERRIE);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Call computation complete callback */
+ HAL_CRYPEx_ComputationCpltCallback(hcryp);
+
+ return HAL_OK;
+ }
+ /* If suspension flag has been raised, suspend processing */
+ else if (hcryp->SuspendRequest == HAL_CRYP_SUSPEND)
+ {
+ /* reset ModeSuspend */
+ hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE;
+
+ /* Disable Computation Complete Flag and Errors Interrupts */
+ __HAL_CRYP_DISABLE_IT(CRYP_IT_CCFIE|CRYP_IT_ERRIE);
+ /* Change the CRYP state */
+ hcryp->State = HAL_CRYP_STATE_SUSPENDED;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ return HAL_OK;
+ }
+ else /* Process the rest of input data */
+ {
+ /* Get the Intput data address */
+ inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+
+ /* Increment/decrement instance pointer/counter */
+ hcryp->pCrypInBuffPtr += 16U;
+ hcryp->CrypInCount -= 16U;
+
+ /* Write the next input block in the Data Input register */
+ hcryp->Instance->DINR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DINR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DINR = *(uint32_t*)(inputaddr);
+ inputaddr+=4U;
+ hcryp->Instance->DINR = *(uint32_t*)(inputaddr);
+
+ return HAL_OK;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* AES */
+
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/