Diff: mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F439xI/TARGET_MODULE_UBLOX_ODIN_W2/TARGET_MBED_CONNECT_ODIN/PinNames.h

Revision:

0:bb348c97df44

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F439xI/TARGET_MODULE_UBLOX_ODIN_W2/TARGET_MBED_CONNECT_ODIN/PinNames.h	Wed Sep 16 01:11:49 2020 +0000
@@ -0,0 +1,190 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+#include "PinNamesTypes.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PA_0  = 0x00, PA_1  = 0x01, PA_2  = 0x02, PA_3  = 0x03,
+    PA_4  = 0x04, PA_5  = 0x05, PA_6  = 0x06, PA_7  = 0x07,
+    PA_8  = 0x08, PA_9  = 0x09, PA_10 = 0x0A, PA_11 = 0x0B,
+    PA_12 = 0x0C, PA_13 = 0x0D, PA_14 = 0x0E, PA_15 = 0x0F,
+
+    PB_0  = 0x10, PB_1  = 0x11, PB_2  = 0x12, PB_3  = 0x13,
+    PB_4  = 0x14, PB_5  = 0x15, PB_6  = 0x16, PB_7  = 0x17,
+    PB_8  = 0x18, PB_9  = 0x19, PB_10 = 0x1A, PB_11 = 0x1B,
+    PB_12 = 0x1C, PB_13 = 0x1D, PB_14 = 0x1E, PB_15 = 0x1F,
+
+    PC_0  = 0x20, PC_1  = 0x21, PC_2  = 0x22, PC_3  = 0x23,
+    PC_4  = 0x24, PC_5  = 0x25, PC_6  = 0x26, PC_7  = 0x27,
+    PC_8  = 0x28, PC_9  = 0x29, PC_10 = 0x2A, PC_11 = 0x2B,
+    PC_12 = 0x2C, PC_13 = 0x2D, PC_14 = 0x2E, PC_15 = 0x2F,
+
+    PD_0  = 0x30, PD_1  = 0x31, PD_2  = 0x32, PD_3  = 0x33,
+    PD_4  = 0x34, PD_5  = 0x35, PD_6  = 0x36, PD_7  = 0x37,
+    PD_8  = 0x38, PD_9  = 0x39, PD_10 = 0x3A, PD_11 = 0x3B,
+    PD_12 = 0x3C, PD_13 = 0x3D, PD_14 = 0x3E, PD_15 = 0x3F,
+
+    PE_0  = 0x40, PE_1  = 0x41, PE_2  = 0x42, PE_3  = 0x43,
+    PE_4  = 0x44, PE_5  = 0x45, PE_6  = 0x46, PE_7  = 0x47,
+    PE_8  = 0x48, PE_9  = 0x49, PE_10 = 0x4A, PE_11 = 0x4B,
+    PE_12 = 0x4C, PE_13 = 0x4D, PE_14 = 0x4E, PE_15 = 0x4F,
+
+    PF_0  = 0x50, PF_1  = 0x51, PF_2  = 0x52, PF_3  = 0x53,
+    PF_4  = 0x54, PF_5  = 0x55, PF_6  = 0x56, PF_7  = 0x57,
+    PF_8  = 0x58, PF_9  = 0x59, PF_10 = 0x5A, PF_11 = 0x5B,
+    PF_12 = 0x5C, PF_13 = 0x5D, PF_14 = 0x5E, PF_15 = 0x5F,
+
+    PG_0  = 0x60, PG_1  = 0x61, PG_2  = 0x62, PG_3  = 0x63,
+    PG_4  = 0x64, PG_5  = 0x65, PG_6  = 0x66, PG_7  = 0x67,
+    PG_8  = 0x68, PG_9  = 0x69, PG_10 = 0x6A, PG_11 = 0x6B,
+    PG_12 = 0x6C, PG_13 = 0x6D, PG_14 = 0x6E, PG_15 = 0x6F,
+
+    PH_0  = 0x70, PH_1  = 0x71, PH_2  = 0x72, PH_3  = 0x73,
+    PH_4  = 0x74, PH_5  = 0x75, PH_6  = 0x76, PH_7  = 0x77,
+    PH_8  = 0x78, PH_9  = 0x79, PH_10 = 0x7A, PH_11 = 0x7B,
+    PH_12 = 0x7C, PH_13 = 0x7D, PH_14 = 0x7E, PH_15 = 0x7F,
+
+    // Module Pins
+    // A
+    P_A5       = PC_2,   // UART-DTR
+    P_A6       = PF_2,   // Switch-0
+    P_A7       = PE_0,   // Red, Mode
+    P_A8       = PB_6,   // Green, Switch-1
+    P_A9       = PB_8,   // Blue
+    P_A10      = PA_11,  // UART-CTS
+    P_A11      = PA_9,   // UART-TXD
+    P_A12      = PA_12,  // UART-RTS
+    P_A13      = PA_10,  // UART-RXD
+    P_A14      = PD_9,   // GPIO-0
+    P_A15      = PD_8,   // GPIO-1
+    P_A16      = PD_11,  // GPIO-2
+    P_A17      = PD_12,  // GPIO-3
+    P_A18      = PA_3,   // UART-DSR
+    // B
+    // C
+    P_C5       = PG_4,   // SPI-IRQ
+    P_C6       = PE_13,  // SPI-MISO
+    P_C8       = PE_12,  // Res
+    P_C10      = PE_14,  // SPI-MOSI
+    P_C11      = PE_11,  // SPI-CS0
+    P_C12      = PE_9,   // Res
+    P_C13      = PF_6,   // GPIO-4
+    P_C14      = PC_1,   // RMII-MDC
+    P_C15      = PA_2,   // RMII-MDIO
+    P_C16      = PF_7,   // GPIO-7
+    P_C17      = PF_1,   // I2C-SCL
+    P_C18      = PF_0,   // I2C-SDA
+    // D
+    P_D1       = PB_12,  // RMII-TXD0
+    P_D2       = PB_13,  // RMII-TXD1
+    P_D3       = PB_11,  // RMII-TXEN
+    P_D4       = PA_7,   // RMII-CRSDV
+    P_D5       = PC_4,   // RMII-RXD0
+    P_D6       = PC_5,   // RMII-RXD1
+    P_D8       = PA_1,   // RMII-REFCLK
+    // TP
+    P_TP5      = PB_4,   // NTRST
+    P_TP7      = PA_13,  // TMS  SWDIO
+    P_TP8      = PA_15,  // TDI
+    P_TP9      = PA_14,  // TCK  SWCLK
+    P_TP10     = PB_3,   // TDO
+    //P_TP11,         // BOOT0
+
+    // Internal
+    LED1       = PD_9,
+    LED2       = PA_12,
+    LED3       = PD_8,
+    LED4       = PA_11,
+    LED5       = PC_2,
+    LED6       = PA_3,
+    LED7       = PF_6,
+    LED_RED    = PE_0,
+    LED_GREEN  = PB_6,
+    LED_BLUE   = PB_8,
+    SW1        = PF_2,
+    SW2        = PG_4,
+
+    // Standardized button names
+    BUTTON1    = SW1,
+    BUTTON2    = SW2,
+
+    I2C_SDA    = PF_0,
+    I2C_SCL    = PF_1,
+    SPI0_MOSI  = PE_14,
+    SPI0_MISO  = PE_13,
+    SPI0_SCK   = PE_12,
+    SPI0_CS    = PE_11,
+    SPI1_CS    = PE_9,
+
+    SPI_MOSI   = SPI0_MOSI,
+    SPI_MISO   = SPI0_MISO,
+    SPI_SCK    = SPI0_SCK,
+    SPI_CS     = SPI0_CS,
+
+    // STDIO for console print
+#ifdef MBED_CONF_TARGET_STDIO_UART_TX
+    STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX,
+#elif MBED_CONF_TARGET_USB_TX
+    STDIO_UART_TX = MBED_CONF_TARGET_USB_TX,
+#else
+    STDIO_UART_TX = PA_9,
+#endif
+
+#ifdef MBED_CONF_TARGET_STDIO_UART_RX
+    STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX,
+#elif MBED_CONF_TARGET_USB_RX
+    STDIO_UART_TX = MBED_CONF_TARGET_USB_RX,
+#else
+    STDIO_UART_RX = PA_10,
+#endif
+
+    // DAPLink
+    USBRX      = STDIO_UART_RX,
+    USBTX      = STDIO_UART_TX,
+    SWDIO      = PA_15,
+    SWCLK      = PA_14,
+    NTRST      = PB_4,
+
+    // Not connected
+    NC    = (int)0xFFFFFFFF
+} PinName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif