Thomas Lyp
Initial commit
Diff: mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F412xG/TARGET_MTB_MXCHIP_EMW3166/PinNames.h
- Revision:
- 0:bb348c97df44
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F412xG/TARGET_MTB_MXCHIP_EMW3166/PinNames.h Wed Sep 16 01:11:49 2020 +0000
@@ -0,0 +1,284 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+#include "PinNamesTypes.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_0 = 0x30,
+ PD_1 = 0x31,
+ PD_2 = 0x32,
+ PD_3 = 0x33,
+ PD_4 = 0x34,
+ PD_5 = 0x35,
+ PD_6 = 0x36,
+ PD_7 = 0x37,
+ PD_8 = 0x38,
+ PD_9 = 0x39,
+ PD_10 = 0x3A,
+ PD_11 = 0x3B,
+ PD_12 = 0x3C,
+ PD_13 = 0x3D,
+ PD_14 = 0x3E,
+ PD_15 = 0x3F,
+
+ PE_0 = 0x40,
+ PE_1 = 0x41,
+ PE_2 = 0x42,
+ PE_3 = 0x43,
+ PE_4 = 0x44,
+ PE_5 = 0x45,
+ PE_6 = 0x46,
+ PE_7 = 0x47,
+ PE_8 = 0x48,
+ PE_9 = 0x49,
+ PE_10 = 0x4A,
+ PE_11 = 0x4B,
+ PE_12 = 0x4C,
+ PE_13 = 0x4D,
+ PE_14 = 0x4E,
+ PE_15 = 0x4F,
+
+ PF_0 = 0x50,
+ PF_1 = 0x51,
+ PF_2 = 0x52,
+ PF_3 = 0x53,
+ PF_4 = 0x54,
+ PF_5 = 0x55,
+ PF_6 = 0x56,
+ PF_7 = 0x57,
+ PF_8 = 0x58,
+ PF_9 = 0x59,
+ PF_10 = 0x5A,
+ PF_11 = 0x5B,
+ PF_12 = 0x5C,
+ PF_13 = 0x5D,
+ PF_14 = 0x5E,
+ PF_15 = 0x5F,
+
+ PG_0 = 0x60,
+ PG_1 = 0x61,
+ PG_2 = 0x62,
+ PG_3 = 0x63,
+ PG_4 = 0x64,
+ PG_5 = 0x65,
+ PG_6 = 0x66,
+ PG_7 = 0x67,
+ PG_8 = 0x68,
+ PG_9 = 0x69,
+ PG_10 = 0x6A,
+ PG_11 = 0x6B,
+ PG_12 = 0x6C,
+ PG_13 = 0x6D,
+ PG_14 = 0x6E,
+ PG_15 = 0x6F,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF,
+
+ //Module pins.
+ P_1 = NC,
+ P_2 = PB_2,
+ P_3 = NC,
+ P_4 = PB_15,
+ P_5 = PB_12,
+ P_6 = PB_13,
+ P_7 = PB_14,
+ P_8 = PC_6,
+ P_9 = PA_15,
+ P_10 = NC,
+ P_11 = NC,
+ P_12 = PC_7,
+ P_13 = NC,
+ P_14 = PC_0,
+ P_15 = NC,
+ P_16 = PC_13,
+ P_17 = PB_8,
+ P_18 = PB_9,
+ P_19 = PB_10,
+ P_20 = NC,
+ P_21 = NC,
+ P_22 = NC,
+ P_23 = NC,
+ P_24 = NC,
+ P_25 = PA_14,
+ P_26 = PA_13,
+ P_27 = PB_3,
+ P_28 = NC,
+ P_29 = PB_7,
+ P_30 = PB_6,
+ P_31 = PB_4,
+ P_32 = NC,
+ P_33 = PA_10,
+ P_34 = PA_5,
+ P_35 = PA_11,
+ P_36 = PA_12,
+ P_37 = PB_0,
+ P_38 = PA_4,
+ P_39 = NC,
+ P_40 = NC,
+ P_41 = NC,
+
+ // ADC internal channels
+ ADC_TEMP = 0xF0,
+ ADC_VREF = 0xF1,
+ ADC_VBAT = 0xF2,
+
+
+ // Generic signals namings
+ LED1 = PB_2,
+ LED2 = PB_10,
+ LED3 = NC,
+ LED_RED = LED1,
+ LED_BLUE = LED2,
+ USER_BUTTON = PC_13,
+
+ // Standardized button names
+ BUTTON1 = USER_BUTTON,
+
+ SERIAL_TX = P_8,
+ SERIAL_RX = P_12,
+
+ I2C_SCL = P_17,
+ I2C_SDA = P_18,
+
+ SPI_MOSI = P_4,
+ SPI_MISO = P_7,
+ SPI_SCK = P_6,
+ SPI_CS = P_5,
+
+ // STDIO for console print
+#ifdef MBED_CONF_TARGET_STDIO_UART_TX
+ STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX,
+#elif MBED_CONF_TARGET_USB_TX
+ STDIO_UART_TX = MBED_CONF_TARGET_USB_TX,
+#else
+ STDIO_UART_TX = PB_6,
+#endif
+
+#ifdef MBED_CONF_TARGET_STDIO_UART_RX
+ STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX,
+#elif MBED_CONF_TARGET_USB_RX
+ STDIO_UART_TX = MBED_CONF_TARGET_USB_RX,
+#else
+ STDIO_UART_RX = PB_7,
+#endif
+ //DAPLink
+ USBRX = STDIO_UART_RX,
+ USBTX = STDIO_UART_TX,
+ SWDIO = P_26,
+ SWCLK = P_25,
+ NTRST = P_13,
+
+ //MTB Aliases
+ //Left side (top view)
+ TGT_SWDIO = SWDIO,
+ TGT_SWCLK = SWCLK,
+ TGT_RESET = NTRST,
+ PB6 = P_30,
+ PB7 = P_29,
+ PC6 = SERIAL_TX,
+ PC7 = SERIAL_RX,
+ PB9 = I2C_SDA,
+ PB8 = I2C_SCL,
+ PB15 = SPI_MOSI,
+ PB14 = SPI_MISO,
+ PB13 = SPI_SCK,
+ PC13 = SPI_CS,
+ PC0 = P_14,
+ PA4 = P_38,
+ PA5 = P_34,
+ PB0 = P_37,
+
+ //Right side (top view)
+ GND = NC,
+ PA11 = P_35,
+ PA12 = P_36,
+ PB4 = P_31, //CS for LCD
+ PB3 = P_27, //RESET for LCD
+ PA15 = P_9, //A0 for LCD
+ PA10 = P_33,
+ PB12 = P_5,
+ PB10 = LED2,
+ PB2 = LED1,
+
+} PinName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif