Thomas Lyp
Initial commit
Diff: mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/PinNames.h
- Revision:
- 0:bb348c97df44
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTB_MTS_DRAGONFLY/PinNames.h Wed Sep 16 01:11:49 2020 +0000
@@ -0,0 +1,247 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+#include "PinNamesTypes.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ // Not connected
+ NC = -1,
+
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // ADC internal channels
+ ADC_TEMP = 0xF0,
+ ADC_VREF = 0xF1,
+ ADC_VBAT = 0xF2,
+
+ // Module pins
+ // Defined based on the external pin (40-pin connector) alternate function mapping (Page 15 of MTQ-H5-B01 device guide)
+ // Device guide used: S000628,Version1.4
+ P_1 = PB_6,
+ P_2 = PA_14,
+ P_3 = PA_15,
+ P_4 = PB_4,
+ P_5 = NC,
+ P_6 = NC,
+ P_7 = NC,
+ P_8 = NC,
+ P_9 = PA_2,
+ P_10 = PA_7,
+ P_11 = PB_1,
+ P_12 = PA_1,
+ P_13 = NC,
+ P_14 = PB_5,
+ P_15 = PA_5,
+ P_16 = PB_8,
+ P_17 = PB_15,
+ P_18 = PC_2,
+ P_19 = PB_0,
+ P_20 = PC_0,
+ P_21 = PC_1,
+ P_22 = PC_4,
+ P_23 = PB_13,
+ P_24 = PC_9,
+ P_25 = PB_9,
+ P_26 = PA_6,
+ P_27 = PC_8,
+ P_28 = NC,
+ P_29 = PA_0,
+ P_30 = PA_9,
+ P_31 = PA_8,
+ P_32 = PA_3,
+ P_33 = NC,
+ P_34 = NC,
+ P_35 = NC,
+ P_36 = NC,
+ P_37 = NC,
+ P_38 = PB_3,
+ P_39 = PA_13,
+ P_40 = PB_7,
+
+ // STDIO for console print
+#ifdef MBED_CONF_TARGET_STDIO_UART_TX
+ STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX,
+#elif MBED_CONF_TARGET_USB_TX
+ STDIO_UART_TX = MBED_CONF_TARGET_USB_TX,
+#else
+ STDIO_UART_TX = PB_6,
+#endif
+
+#ifdef MBED_CONF_TARGET_STDIO_UART_RX
+ STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX,
+#elif MBED_CONF_TARGET_USB_RX
+ STDIO_UART_TX = MBED_CONF_TARGET_USB_RX,
+#else
+ STDIO_UART_RX = PB_7,
+#endif
+
+ //DAPLink
+ USBTX = STDIO_UART_TX,
+ USBRX = STDIO_UART_RX,
+ SWDIO = PA_13,
+ SWCLK = PA_14,
+
+ I2C1_SCL = PB_8,
+ I2C1_SDA = PB_9,
+ I2C3_SCL = PA_8,
+ I2C3_SDA = PC_9,
+
+ I2C_SCL = I2C1_SCL,
+ I2C_SDA = I2C1_SDA,
+
+ SPI1_MOSI = PB_5,
+ SPI1_MISO = PA_6,
+ SPI1_SCK = PA_5,
+ SPI2_MOSI = PB_15,
+ SPI2_MISO = PC_2,
+ SPI2_SCK = PB_13,
+
+ SPI_MOSI = SPI1_MOSI,
+ SPI_MISO = SPI1_MISO,
+ SPI_SCK = SPI1_SCK,
+ SPI_CS1 = PA_3, //LCD CS
+ SPI_CS2 = PA_15, //SD Card CS
+
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ SERIAL_RTS = PA_0,
+ SERIAL_CTS = PA_1,
+ SERIAL_DCD = PA_7,
+ SERIAL_DSR = PA_9,
+ SERIAL_DTR = PA_8,
+ SERIAL_RI = PB_1,
+
+ WAKEUP = PA_0,
+
+ // Generic signals namings
+ LED1 = PA_7,
+ LED2 = PC_4,
+ LED3 = PB_13, //MTB mapped to LINK_STATUS pin on module.
+ SW1 = PB_4,
+ GPIO1 = PC_8,
+ GPIO3 = PB_1,
+ AIN0 = PB_0,
+ AIN1 = PC_0,
+ AIN2 = PC_1,
+
+ //Standardized button names
+ BUTTON1 = SW1,
+
+ RADIO_TX = PC_7,
+ RADIO_RX = PC_6,
+ RADIO_RTS = PB_10,
+ RADIO_CTS = PB_12,
+ RADIO_DCD = NC,
+ RADIO_DSR = NC,
+ RADIO_DTR = NC,
+ RADIO_RI = NC,
+ MDMPWRON = PC_13, // 3G_ONOFF DragonFly Design Guide, Page No. 16
+ MDMTXD = RADIO_TX, // Transmit Data
+ MDMRXD = RADIO_RX, // Receive Data
+ MDMRTS = RADIO_RTS, // Request to Send
+ MDMCTS = RADIO_CTS, // Clear to Send
+ MDMDCD = RADIO_DCD, // Data Carrier Detect
+ MDMDSR = RADIO_DSR, // Data Set Ready
+ MDMDTR = RADIO_DTR, // Data Terminal Ready
+ MDMRI = RADIO_RI, // Ring Indicator
+
+} PinName;
+
+#define ACTIVE_HIGH_POLARITY 1
+#define ACTIVE_LOW_POLARITY 0
+
+#define MDM_PIN_POLARITY ACTIVE_HIGH_POLARITY
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif