Thomas Lyp / DevLibMemoryController

Initial commit

Dependencies:   FastPWM

mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F439xI/TARGET_WIO_3G/PeripheralPins.c@0:bb348c97df44, 2020-09-16 (annotated)

Committer:
lypinator
Date:
Wed Sep 16 01:11:49 2020 +0000
Revision:
0:bb348c97df44
Added PWM

Who changed what in which revision?

UserRevisionLine numberNew contents of line
lypinator 0:bb348c97df44 1 /* mbed Microcontroller Library
lypinator 0:bb348c97df44 2 '*******************************************************************************
lypinator 0:bb348c97df44 3 * Copyright (c) 2016, STMicroelectronics
lypinator 0:bb348c97df44 4 * All rights reserved.
lypinator 0:bb348c97df44 5 *
lypinator 0:bb348c97df44 6 * Redistribution and use in source and binary forms, with or without
lypinator 0:bb348c97df44 7 * modification, are permitted provided that the following conditions are met:
lypinator 0:bb348c97df44 8 *
lypinator 0:bb348c97df44 9 * 1. Redistributions of source code must retain the above copyright notice,
lypinator 0:bb348c97df44 10 * this list of conditions and the following disclaimer.
lypinator 0:bb348c97df44 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
lypinator 0:bb348c97df44 12 * this list of conditions and the following disclaimer in the documentation
lypinator 0:bb348c97df44 13 * and/or other materials provided with the distribution.
lypinator 0:bb348c97df44 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
lypinator 0:bb348c97df44 15 * may be used to endorse or promote products derived from this software
lypinator 0:bb348c97df44 16 * without specific prior written permission.
lypinator 0:bb348c97df44 17 *
lypinator 0:bb348c97df44 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
lypinator 0:bb348c97df44 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
lypinator 0:bb348c97df44 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
lypinator 0:bb348c97df44 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
lypinator 0:bb348c97df44 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
lypinator 0:bb348c97df44 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
lypinator 0:bb348c97df44 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
lypinator 0:bb348c97df44 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
lypinator 0:bb348c97df44 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
lypinator 0:bb348c97df44 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
lypinator 0:bb348c97df44 28 *******************************************************************************
lypinator 0:bb348c97df44 29 */
lypinator 0:bb348c97df44 30
lypinator 0:bb348c97df44 31 #include "PeripheralPins.h"
lypinator 0:bb348c97df44 32 #include "mbed_toolchain.h"
lypinator 0:bb348c97df44 33
lypinator 0:bb348c97df44 34 // =====
lypinator 0:bb348c97df44 35 // Note: Commented lines are alternative possibilities which are not used per default.
lypinator 0:bb348c97df44 36 // If you change them, you will have also to modify the corresponding xxx_api.c file
lypinator 0:bb348c97df44 37 // for pwmout, analogin, analogout, ...
lypinator 0:bb348c97df44 38 // =====
lypinator 0:bb348c97df44 39
lypinator 0:bb348c97df44 40 //*** ADC ***
lypinator 0:bb348c97df44 41
lypinator 0:bb348c97df44 42 MBED_WEAK const PinMap PinMap_ADC[] = {
lypinator 0:bb348c97df44 43 {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
lypinator 0:bb348c97df44 44 // {PA_0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0
lypinator 0:bb348c97df44 45 // {PA_0, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0
lypinator 0:bb348c97df44 46 // {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 (pin used by ethernet)
lypinator 0:bb348c97df44 47 // {PA_1, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1 (pin used by ethernet)
lypinator 0:bb348c97df44 48 // {PA_1, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1 (pin used by ethernet)
lypinator 0:bb348c97df44 49 // {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 (pin used by ethernet)
lypinator 0:bb348c97df44 50 // {PA_2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2 (pin used by ethernet)
lypinator 0:bb348c97df44 51 // {PA_2, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2 (pin used by ethernet)
lypinator 0:bb348c97df44 52 {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 - ARDUINO A0
lypinator 0:bb348c97df44 53 // {PA_3, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3 - ARDUINO A0
lypinator 0:bb348c97df44 54 // {PA_3, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_IN3 - ARDUINO A0
lypinator 0:bb348c97df44 55 {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
lypinator 0:bb348c97df44 56 // {PA_4, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
lypinator 0:bb348c97df44 57 {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 - ARDUINO D13
lypinator 0:bb348c97df44 58 // {PA_5, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5 - ARDUINO D13
lypinator 0:bb348c97df44 59 {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 - ARDUINO D12
lypinator 0:bb348c97df44 60 // {PA_6, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6 - ARDUINO D12
lypinator 0:bb348c97df44 61 // {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 (pin used by ethernet when JP6 ON) - ARDUINO D11 (default configuration)
lypinator 0:bb348c97df44 62 {PA_7, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7 (pin used by ethernet when JP6 ON) - ARDUINO D11 (default configuration)
lypinator 0:bb348c97df44 63 // {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 (pin used by LED1)
lypinator 0:bb348c97df44 64 // {PB_0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8 (pin used by LED1)
lypinator 0:bb348c97df44 65 {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
lypinator 0:bb348c97df44 66 // {PB_1, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9
lypinator 0:bb348c97df44 67 {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10 - ARDUINO A1
lypinator 0:bb348c97df44 68 // {PC_0, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10 - ARDUINO A1
lypinator 0:bb348c97df44 69 // {PC_0, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_IN10 - ARDUINO A1
lypinator 0:bb348c97df44 70 // {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 (pin used by ethernet)
lypinator 0:bb348c97df44 71 // {PC_1, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11 (pin used by ethernet)
lypinator 0:bb348c97df44 72 // {PC_1, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11 (pin used by ethernet)
lypinator 0:bb348c97df44 73 {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
lypinator 0:bb348c97df44 74 // {PC_2, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
lypinator 0:bb348c97df44 75 // {PC_2, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12
lypinator 0:bb348c97df44 76 {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 - ARDUINO A2
lypinator 0:bb348c97df44 77 // {PC_3, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13 - ARDUINO A2
lypinator 0:bb348c97df44 78 // {PC_3, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_IN13 - ARDUINO A2
lypinator 0:bb348c97df44 79 {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 (pin used by ethernet when JP6 ON)
lypinator 0:bb348c97df44 80 // {PC_4, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14 (pin used by ethernet when JP6 ON)
lypinator 0:bb348c97df44 81 {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15 (pin used by ethernet when JP6 ON)
lypinator 0:bb348c97df44 82 // {PC_5, ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15 (pin used by ethernet when JP6 ON)
lypinator 0:bb348c97df44 83 {PF_3, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9 - ARDUINO A3
lypinator 0:bb348c97df44 84 {PF_4, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14
lypinator 0:bb348c97df44 85 {PF_5, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15 - ARDUINO A4
lypinator 0:bb348c97df44 86 {PF_6, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4
lypinator 0:bb348c97df44 87 {PF_7, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5
lypinator 0:bb348c97df44 88 {PF_8, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6
lypinator 0:bb348c97df44 89 {PF_9, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7
lypinator 0:bb348c97df44 90 {PF_10, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 - ARDUINO A5
lypinator 0:bb348c97df44 91 {NC, NC, 0}
lypinator 0:bb348c97df44 92 };
lypinator 0:bb348c97df44 93
lypinator 0:bb348c97df44 94 MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
lypinator 0:bb348c97df44 95 {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // See in analogin_api.c the correct ADC channel used
lypinator 0:bb348c97df44 96 {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // See in analogin_api.c the correct ADC channel used
lypinator 0:bb348c97df44 97 {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // See in analogin_api.c the correct ADC channel used
lypinator 0:bb348c97df44 98 {NC, NC, 0}
lypinator 0:bb348c97df44 99 };
lypinator 0:bb348c97df44 100
lypinator 0:bb348c97df44 101 //*** DAC ***
lypinator 0:bb348c97df44 102
lypinator 0:bb348c97df44 103 MBED_WEAK const PinMap PinMap_DAC[] = {
lypinator 0:bb348c97df44 104 {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
lypinator 0:bb348c97df44 105 {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - ARDUINO D13
lypinator 0:bb348c97df44 106 {NC, NC, 0}
lypinator 0:bb348c97df44 107 };
lypinator 0:bb348c97df44 108
lypinator 0:bb348c97df44 109 //*** I2C ***
lypinator 0:bb348c97df44 110
lypinator 0:bb348c97df44 111 MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
lypinator 0:bb348c97df44 112 // {PB_7, I2C_1 , STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // (pin used by LED2)
lypinator 0:bb348c97df44 113 {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D14
lypinator 0:bb348c97df44 114 {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
lypinator 0:bb348c97df44 115 {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
lypinator 0:bb348c97df44 116 {PF_0, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
lypinator 0:bb348c97df44 117 {NC, NC, 0}
lypinator 0:bb348c97df44 118 };
lypinator 0:bb348c97df44 119
lypinator 0:bb348c97df44 120 MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
lypinator 0:bb348c97df44 121 {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
lypinator 0:bb348c97df44 122 {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
lypinator 0:bb348c97df44 123 {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D15
lypinator 0:bb348c97df44 124 {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
lypinator 0:bb348c97df44 125 {PF_1, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
lypinator 0:bb348c97df44 126 {NC, NC, 0}
lypinator 0:bb348c97df44 127 };
lypinator 0:bb348c97df44 128
lypinator 0:bb348c97df44 129 //*** PWM ***
lypinator 0:bb348c97df44 130
lypinator 0:bb348c97df44 131 MBED_WEAK const PinMap PinMap_PWM[] = {
lypinator 0:bb348c97df44 132 {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
lypinator 0:bb348c97df44 133 // {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 (TIM5 used by us_ticker)
lypinator 0:bb348c97df44 134 // {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 (pin used by ethernet)
lypinator 0:bb348c97df44 135 // {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 (TIM5 used by us_ticker) (pin used by ethernet)
lypinator 0:bb348c97df44 136 // {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 (pin used by ethernet)
lypinator 0:bb348c97df44 137 // {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 (TIM5 used by us_ticker)
lypinator 0:bb348c97df44 138 // {PA_2, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 (pin used by ethernet)
lypinator 0:bb348c97df44 139 // {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - ARDUINO A0
lypinator 0:bb348c97df44 140 {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 (TIM5 used by us_ticker) - ARDUINO A0
lypinator 0:bb348c97df44 141 // {PA_3, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 - ARDUINO A0
lypinator 0:bb348c97df44 142 // {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - ARDUINO D13
lypinator 0:bb348c97df44 143 {PA_5, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N - ARDUINO D13
lypinator 0:bb348c97df44 144 // {PA_6, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 - ARDUINO D12
lypinator 0:bb348c97df44 145 {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO D12
lypinator 0:bb348c97df44 146 {PA_7, PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 (pin used by ethernet when JP6 ON) - ARDUINO D11 (default configuration)
lypinator 0:bb348c97df44 147 // {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N (pin used by ethernet when JP6 ON) - ARDUINO D11 (default configuration)
lypinator 0:bb348c97df44 148 // {PA_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 (pin used by ethernet when JP6 ON) - ARDUINO D11 (default configuration)
lypinator 0:bb348c97df44 149 // {PA_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N (pin used by ethernet when JP6 ON) - ARDUINO D11 (default configuration)
lypinator 0:bb348c97df44 150 {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
lypinator 0:bb348c97df44 151 // {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 (pin used by usb)
lypinator 0:bb348c97df44 152 // {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 (pin used by usb)
lypinator 0:bb348c97df44 153 // {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 (pin used by usb)
lypinator 0:bb348c97df44 154 {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
lypinator 0:bb348c97df44 155 // {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N (pin used by LED1)
lypinator 0:bb348c97df44 156 // {PB_0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 (pin used by LED1)
lypinator 0:bb348c97df44 157 // {PB_0, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N (pin used by LED1)
lypinator 0:bb348c97df44 158 // {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
lypinator 0:bb348c97df44 159 // {PB_1, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
lypinator 0:bb348c97df44 160 {PB_1, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
lypinator 0:bb348c97df44 161 {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
lypinator 0:bb348c97df44 162 {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
lypinator 0:bb348c97df44 163 {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO D11 (need HW and SW updates)
lypinator 0:bb348c97df44 164 // HW solder bridge update : SB121 off, SB122 on
lypinator 0:bb348c97df44 165 // SW : config from json files
lypinator 0:bb348c97df44 166 {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
lypinator 0:bb348c97df44 167 // {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 (pin used by LED2)
lypinator 0:bb348c97df44 168 // {PB_8, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 - ARDUINO D15
lypinator 0:bb348c97df44 169 {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - ARDUINO D15
lypinator 0:bb348c97df44 170 {PB_9, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - ARDUINO D14
lypinator 0:bb348c97df44 171 // {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - ARDUINO D14
lypinator 0:bb348c97df44 172 {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
lypinator 0:bb348c97df44 173 {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
lypinator 0:bb348c97df44 174 {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N (pin used by ethernet when JP7 ON)
lypinator 0:bb348c97df44 175 // {PB_14, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 (pin used by LED3)
lypinator 0:bb348c97df44 176 // {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N (pin used by LED3)
lypinator 0:bb348c97df44 177 // {PB_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N (pin used by LED3)
lypinator 0:bb348c97df44 178 {PB_15, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2
lypinator 0:bb348c97df44 179 // {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
lypinator 0:bb348c97df44 180 // {PB_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
lypinator 0:bb348c97df44 181 {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
lypinator 0:bb348c97df44 182 // {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
lypinator 0:bb348c97df44 183 {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
lypinator 0:bb348c97df44 184 // {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
lypinator 0:bb348c97df44 185 {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
lypinator 0:bb348c97df44 186 // {PC_8, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
lypinator 0:bb348c97df44 187 {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
lypinator 0:bb348c97df44 188 // {PC_9, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
lypinator 0:bb348c97df44 189 {PD_12, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
lypinator 0:bb348c97df44 190 {PD_13, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
lypinator 0:bb348c97df44 191 {PD_14, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - ARDUINO D10
lypinator 0:bb348c97df44 192 {PD_15, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - ARDUINO D9
lypinator 0:bb348c97df44 193 {PE_5, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
lypinator 0:bb348c97df44 194 {PE_6, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
lypinator 0:bb348c97df44 195 {PE_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
lypinator 0:bb348c97df44 196 {PE_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 - ARDUINO D6
lypinator 0:bb348c97df44 197 {PE_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
lypinator 0:bb348c97df44 198 {PE_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 - ARDUINO D5
lypinator 0:bb348c97df44 199 {PE_12, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
lypinator 0:bb348c97df44 200 {PE_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 - ARDUINO D3
lypinator 0:bb348c97df44 201 {PE_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
lypinator 0:bb348c97df44 202 {PF_6, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
lypinator 0:bb348c97df44 203 {PF_7, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
lypinator 0:bb348c97df44 204 {PF_8, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
lypinator 0:bb348c97df44 205 {PF_9, PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
lypinator 0:bb348c97df44 206 {NC, NC, 0}
lypinator 0:bb348c97df44 207 };
lypinator 0:bb348c97df44 208
lypinator 0:bb348c97df44 209 //*** SERIAL ***
lypinator 0:bb348c97df44 210
lypinator 0:bb348c97df44 211 MBED_WEAK const PinMap PinMap_UART_TX[] = {
lypinator 0:bb348c97df44 212 {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
lypinator 0:bb348c97df44 213 {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // (pin used by ethernet)
lypinator 0:bb348c97df44 214 // {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (pin used by usb)
lypinator 0:bb348c97df44 215 {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
lypinator 0:bb348c97df44 216 {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
lypinator 0:bb348c97df44 217 {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
lypinator 0:bb348c97df44 218 // {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
lypinator 0:bb348c97df44 219 {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
lypinator 0:bb348c97df44 220 {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
lypinator 0:bb348c97df44 221 {PD_5, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
lypinator 0:bb348c97df44 222 {PD_8, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
lypinator 0:bb348c97df44 223 {PE_1, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
lypinator 0:bb348c97df44 224 {PE_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
lypinator 0:bb348c97df44 225 {PF_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
lypinator 0:bb348c97df44 226 {PG_14, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
lypinator 0:bb348c97df44 227 {NC, NC, 0}
lypinator 0:bb348c97df44 228 };
lypinator 0:bb348c97df44 229
lypinator 0:bb348c97df44 230 MBED_WEAK const PinMap PinMap_UART_RX[] = {
lypinator 0:bb348c97df44 231 // {PA_1, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // (pin used by ethernet)
lypinator 0:bb348c97df44 232 {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
lypinator 0:bb348c97df44 233 // {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (pin used by usb)
lypinator 0:bb348c97df44 234 // {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (pin used by LED2)
lypinator 0:bb348c97df44 235 {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
lypinator 0:bb348c97df44 236 {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
lypinator 0:bb348c97df44 237 {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
lypinator 0:bb348c97df44 238 // {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
lypinator 0:bb348c97df44 239 {PD_2, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
lypinator 0:bb348c97df44 240 {PD_6, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
lypinator 0:bb348c97df44 241 {PD_9, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
lypinator 0:bb348c97df44 242 {PE_0, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
lypinator 0:bb348c97df44 243 {PE_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
lypinator 0:bb348c97df44 244 {PF_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
lypinator 0:bb348c97df44 245 {PG_9, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D0
lypinator 0:bb348c97df44 246 {NC, NC, 0}
lypinator 0:bb348c97df44 247 };
lypinator 0:bb348c97df44 248
lypinator 0:bb348c97df44 249 MBED_WEAK const PinMap PinMap_UART_RTS[] = {
lypinator 0:bb348c97df44 250 {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // (pin used by ethernet)
lypinator 0:bb348c97df44 251 // {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (pin used by usb)
lypinator 0:bb348c97df44 252 // {PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // (pin used by LED3)
lypinator 0:bb348c97df44 253 {PD_4, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
lypinator 0:bb348c97df44 254 {PD_12, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
lypinator 0:bb348c97df44 255 {PG_8, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
lypinator 0:bb348c97df44 256 {PG_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
lypinator 0:bb348c97df44 257 {NC, NC, 0}
lypinator 0:bb348c97df44 258 };
lypinator 0:bb348c97df44 259
lypinator 0:bb348c97df44 260 MBED_WEAK const PinMap PinMap_UART_CTS[] = {
lypinator 0:bb348c97df44 261 {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
lypinator 0:bb348c97df44 262 // {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (pin used by usb)
lypinator 0:bb348c97df44 263 {PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // (pin used by ethernet when JP7 ON)
lypinator 0:bb348c97df44 264 {PD_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
lypinator 0:bb348c97df44 265 {PD_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
lypinator 0:bb348c97df44 266 // {PG_13, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // (pin used by ethernet)
lypinator 0:bb348c97df44 267 {PG_15, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
lypinator 0:bb348c97df44 268 {NC, NC, 0}
lypinator 0:bb348c97df44 269 };
lypinator 0:bb348c97df44 270
lypinator 0:bb348c97df44 271 //*** SPI ***
lypinator 0:bb348c97df44 272
lypinator 0:bb348c97df44 273 MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
lypinator 0:bb348c97df44 274 {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // pin used by ethernet when JP6 ON - ARDUINO D11 (default configuration)
lypinator 0:bb348c97df44 275 {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D11 (need HW and SW updates)
lypinator 0:bb348c97df44 276 // HW solder bridge update : SB121 off, SB122 on
lypinator 0:bb348c97df44 277 // SW : config from json files
lypinator 0:bb348c97df44 278 // {PB_5, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 279 {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
lypinator 0:bb348c97df44 280 {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // ARDUINO A2
lypinator 0:bb348c97df44 281 {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 282 {PD_6, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
lypinator 0:bb348c97df44 283 {PE_6, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
lypinator 0:bb348c97df44 284 {PE_14, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
lypinator 0:bb348c97df44 285 {PF_9, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
lypinator 0:bb348c97df44 286 {PF_11, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
lypinator 0:bb348c97df44 287 {PG_14, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)}, // ARDUINO D1
lypinator 0:bb348c97df44 288 {NC, NC, 0}
lypinator 0:bb348c97df44 289 };
lypinator 0:bb348c97df44 290
lypinator 0:bb348c97df44 291 MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
lypinator 0:bb348c97df44 292 {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D12
lypinator 0:bb348c97df44 293 {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
lypinator 0:bb348c97df44 294 // {PB_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 295 // {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // (pin used by LED3)
lypinator 0:bb348c97df44 296 {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
lypinator 0:bb348c97df44 297 {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 298 {PE_5, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
lypinator 0:bb348c97df44 299 {PE_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, // ARDUINO D3
lypinator 0:bb348c97df44 300 {PF_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
lypinator 0:bb348c97df44 301 {PG_12, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
lypinator 0:bb348c97df44 302 {NC, NC, 0}
lypinator 0:bb348c97df44 303 };
lypinator 0:bb348c97df44 304
lypinator 0:bb348c97df44 305 MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
lypinator 0:bb348c97df44 306 {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ARDUINO D13
lypinator 0:bb348c97df44 307 // {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
lypinator 0:bb348c97df44 308 {PB_3, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 309 {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
lypinator 0:bb348c97df44 310 {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // (pin used by ethernet when JP7 ON)
lypinator 0:bb348c97df44 311 {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 312 {PD_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
lypinator 0:bb348c97df44 313 {PE_2, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
lypinator 0:bb348c97df44 314 {PE_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
lypinator 0:bb348c97df44 315 {PF_7, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
lypinator 0:bb348c97df44 316 // {PG_13, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)}, // (pin used by ethernet)
lypinator 0:bb348c97df44 317 {NC, NC, 0}
lypinator 0:bb348c97df44 318 };
lypinator 0:bb348c97df44 319
lypinator 0:bb348c97df44 320 MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
lypinator 0:bb348c97df44 321 {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
lypinator 0:bb348c97df44 322 // {PA_4, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 323 // {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
lypinator 0:bb348c97df44 324 {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 325 {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // ARDUINO D14
lypinator 0:bb348c97df44 326 {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
lypinator 0:bb348c97df44 327 {PE_4, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
lypinator 0:bb348c97df44 328 {PE_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)}, // ARDUINO D5
lypinator 0:bb348c97df44 329 {PF_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
lypinator 0:bb348c97df44 330 {PG_8, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
lypinator 0:bb348c97df44 331 {NC, NC, 0}
lypinator 0:bb348c97df44 332 };
lypinator 0:bb348c97df44 333
lypinator 0:bb348c97df44 334 MBED_WEAK const PinMap PinMap_CAN_RD[] = {
lypinator 0:bb348c97df44 335 {PB_8, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
lypinator 0:bb348c97df44 336 {PB_12, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
lypinator 0:bb348c97df44 337 {PD_0, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
lypinator 0:bb348c97df44 338 {PB_5, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)}, // ARDUINO D11 (need HW and SW updates)
lypinator 0:bb348c97df44 339 // HW solder bridge update : SB121 off, SB122 on
lypinator 0:bb348c97df44 340 // SW : config from json files
lypinator 0:bb348c97df44 341 {PA_11, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
lypinator 0:bb348c97df44 342 {NC, NC, 0}
lypinator 0:bb348c97df44 343 };
lypinator 0:bb348c97df44 344
lypinator 0:bb348c97df44 345 MBED_WEAK const PinMap PinMap_CAN_TD[] = {
lypinator 0:bb348c97df44 346 {PB_9, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
lypinator 0:bb348c97df44 347 {PB_13, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
lypinator 0:bb348c97df44 348 {PD_1, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
lypinator 0:bb348c97df44 349 {PB_6, CAN_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
lypinator 0:bb348c97df44 350 {PA_12, CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
lypinator 0:bb348c97df44 351 {NC, NC, 0}
lypinator 0:bb348c97df44 352 };