Thomas Lyp / DevLibMemoryController

Initial commit

Dependencies:   FastPWM

mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F437xG/TARGET_UBLOX_C030/onboard_modem_api.c@0:bb348c97df44, 2020-09-16 (annotated)

Committer:
lypinator
Date:
Wed Sep 16 01:11:49 2020 +0000
Revision:
0:bb348c97df44
Added PWM

Who changed what in which revision?

UserRevisionLine numberNew contents of line
lypinator 0:bb348c97df44 1 /* mbed Microcontroller Library
lypinator 0:bb348c97df44 2 * Copyright (c) 2017 ARM Limited
lypinator 0:bb348c97df44 3 *
lypinator 0:bb348c97df44 4 * Licensed under the Apache License, Version 2.0 (the "License");
lypinator 0:bb348c97df44 5 * you may not use this file except in compliance with the License.
lypinator 0:bb348c97df44 6 * You may obtain a copy of the License at
lypinator 0:bb348c97df44 7 *
lypinator 0:bb348c97df44 8 * http://www.apache.org/licenses/LICENSE-2.0
lypinator 0:bb348c97df44 9 *
lypinator 0:bb348c97df44 10 * Unless required by applicable law or agreed to in writing, software
lypinator 0:bb348c97df44 11 * distributed under the License is distributed on an "AS IS" BASIS,
lypinator 0:bb348c97df44 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
lypinator 0:bb348c97df44 13 * See the License for the specific language governing permissions and
lypinator 0:bb348c97df44 14 * limitations under the License.
lypinator 0:bb348c97df44 15 */
lypinator 0:bb348c97df44 16
lypinator 0:bb348c97df44 17 #if MBED_CONF_NSAPI_PRESENT
lypinator 0:bb348c97df44 18
lypinator 0:bb348c97df44 19 #include "onboard_modem_api.h"
lypinator 0:bb348c97df44 20 #include "gpio_api.h"
lypinator 0:bb348c97df44 21 #include "platform/mbed_wait_api.h"
lypinator 0:bb348c97df44 22 #include "PinNames.h"
lypinator 0:bb348c97df44 23
lypinator 0:bb348c97df44 24 #if MODEM_ON_BOARD
lypinator 0:bb348c97df44 25
lypinator 0:bb348c97df44 26 // Note microseconds not milliseconds
lypinator 0:bb348c97df44 27 static void press_power_button(int time_us)
lypinator 0:bb348c97df44 28 {
lypinator 0:bb348c97df44 29 gpio_t gpio;
lypinator 0:bb348c97df44 30
lypinator 0:bb348c97df44 31 #if defined(TARGET_UBLOX_C030_R410M)
lypinator 0:bb348c97df44 32 gpio_init_inout(&gpio, MDMPWRON, PIN_OUTPUT, OpenDrain, 0);
lypinator 0:bb348c97df44 33 #else
lypinator 0:bb348c97df44 34 gpio_init_out_ex(&gpio, MDMPWRON, 0);
lypinator 0:bb348c97df44 35 #endif
lypinator 0:bb348c97df44 36
lypinator 0:bb348c97df44 37 wait_us(time_us);
lypinator 0:bb348c97df44 38 gpio_write(&gpio, 1);
lypinator 0:bb348c97df44 39 }
lypinator 0:bb348c97df44 40
lypinator 0:bb348c97df44 41 void onboard_modem_init()
lypinator 0:bb348c97df44 42 {
lypinator 0:bb348c97df44 43 gpio_t gpio;
lypinator 0:bb348c97df44 44
lypinator 0:bb348c97df44 45 // Take us out of reset
lypinator 0:bb348c97df44 46 gpio_init_out_ex(&gpio, MDMRST, 1);
lypinator 0:bb348c97df44 47 }
lypinator 0:bb348c97df44 48
lypinator 0:bb348c97df44 49 void onboard_modem_deinit()
lypinator 0:bb348c97df44 50 {
lypinator 0:bb348c97df44 51 gpio_t gpio;
lypinator 0:bb348c97df44 52
lypinator 0:bb348c97df44 53 // Back into reset
lypinator 0:bb348c97df44 54 gpio_init_out_ex(&gpio, MDMRST, 0);
lypinator 0:bb348c97df44 55 }
lypinator 0:bb348c97df44 56
lypinator 0:bb348c97df44 57 void onboard_modem_power_up()
lypinator 0:bb348c97df44 58 {
lypinator 0:bb348c97df44 59 #if defined(TARGET_UBLOX_C030_R410M)
lypinator 0:bb348c97df44 60 /* keep the power line low for 1 seconds */
lypinator 0:bb348c97df44 61 press_power_button(1000000);
lypinator 0:bb348c97df44 62 #else
lypinator 0:bb348c97df44 63 /* keep the power line low for 50 microseconds */
lypinator 0:bb348c97df44 64 press_power_button(50);
lypinator 0:bb348c97df44 65 #endif
lypinator 0:bb348c97df44 66
lypinator 0:bb348c97df44 67 /* give modem a little time to respond */
lypinator 0:bb348c97df44 68 wait_ms(100);
lypinator 0:bb348c97df44 69 }
lypinator 0:bb348c97df44 70
lypinator 0:bb348c97df44 71 void onboard_modem_power_down()
lypinator 0:bb348c97df44 72 {
lypinator 0:bb348c97df44 73 #if defined(TARGET_UBLOX_C030_R410M)
lypinator 0:bb348c97df44 74 /* keep the power line low for 1.5 seconds */
lypinator 0:bb348c97df44 75 press_power_button(1500000);
lypinator 0:bb348c97df44 76 #else
lypinator 0:bb348c97df44 77 /* keep the power line low for 1 seconds */
lypinator 0:bb348c97df44 78 press_power_button(1000000);
lypinator 0:bb348c97df44 79 #endif
lypinator 0:bb348c97df44 80 }
lypinator 0:bb348c97df44 81
lypinator 0:bb348c97df44 82 #endif //MODEM_ON_BOARD
lypinator 0:bb348c97df44 83 #endif //MBED_CONF_NSAPI_PRESENT