Thomas Lyp / DevLibMemoryController

Initial commit

Dependencies:   FastPWM

mbed-dev-master/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F401xE/TARGET_NUCLEO_F401RE/PeripheralPins.c@0:bb348c97df44, 2020-09-16 (annotated)

Committer:
lypinator
Date:
Wed Sep 16 01:11:49 2020 +0000
Revision:
0:bb348c97df44
Added PWM

Who changed what in which revision?

UserRevisionLine numberNew contents of line
lypinator 0:bb348c97df44 1 /* mbed Microcontroller Library
lypinator 0:bb348c97df44 2 *******************************************************************************
lypinator 0:bb348c97df44 3 * Copyright (c) 2018, STMicroelectronics
lypinator 0:bb348c97df44 4 * All rights reserved.
lypinator 0:bb348c97df44 5 *
lypinator 0:bb348c97df44 6 * Redistribution and use in source and binary forms, with or without
lypinator 0:bb348c97df44 7 * modification, are permitted provided that the following conditions are met:
lypinator 0:bb348c97df44 8 *
lypinator 0:bb348c97df44 9 * 1. Redistributions of source code must retain the above copyright notice,
lypinator 0:bb348c97df44 10 * this list of conditions and the following disclaimer.
lypinator 0:bb348c97df44 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
lypinator 0:bb348c97df44 12 * this list of conditions and the following disclaimer in the documentation
lypinator 0:bb348c97df44 13 * and/or other materials provided with the distribution.
lypinator 0:bb348c97df44 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
lypinator 0:bb348c97df44 15 * may be used to endorse or promote products derived from this software
lypinator 0:bb348c97df44 16 * without specific prior written permission.
lypinator 0:bb348c97df44 17 *
lypinator 0:bb348c97df44 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
lypinator 0:bb348c97df44 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
lypinator 0:bb348c97df44 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
lypinator 0:bb348c97df44 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
lypinator 0:bb348c97df44 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
lypinator 0:bb348c97df44 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
lypinator 0:bb348c97df44 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
lypinator 0:bb348c97df44 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
lypinator 0:bb348c97df44 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
lypinator 0:bb348c97df44 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
lypinator 0:bb348c97df44 28 *******************************************************************************
lypinator 0:bb348c97df44 29 */
lypinator 0:bb348c97df44 30
lypinator 0:bb348c97df44 31 #include "PeripheralPins.h"
lypinator 0:bb348c97df44 32 #include "mbed_toolchain.h"
lypinator 0:bb348c97df44 33
lypinator 0:bb348c97df44 34 //==============================================================================
lypinator 0:bb348c97df44 35 // Notes
lypinator 0:bb348c97df44 36 //
lypinator 0:bb348c97df44 37 // - The pins mentioned Px_y_ALTz are alternative possibilities which use other
lypinator 0:bb348c97df44 38 // HW peripheral instances. You can use them the same way as any other "normal"
lypinator 0:bb348c97df44 39 // pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board
lypinator 0:bb348c97df44 40 // pinout image on mbed.org.
lypinator 0:bb348c97df44 41 //
lypinator 0:bb348c97df44 42 // - The pins which are connected to other components present on the board have
lypinator 0:bb348c97df44 43 // the comment "Connected to xxx". The pin function may not work properly in this
lypinator 0:bb348c97df44 44 // case. These pins may not be displayed on the board pinout image on mbed.org.
lypinator 0:bb348c97df44 45 // Please read the board reference manual and schematic for more information.
lypinator 0:bb348c97df44 46 //
lypinator 0:bb348c97df44 47 // - Warning: some pins are connected to the default STDIO_UART_TX and STDIO_UART_RX pins.
lypinator 0:bb348c97df44 48 // See https://os.mbed.com/teams/ST/wiki/STDIO for more information.
lypinator 0:bb348c97df44 49 //
lypinator 0:bb348c97df44 50 //==============================================================================
lypinator 0:bb348c97df44 51
lypinator 0:bb348c97df44 52
lypinator 0:bb348c97df44 53 //*** ADC ***
lypinator 0:bb348c97df44 54
lypinator 0:bb348c97df44 55 MBED_WEAK const PinMap PinMap_ADC[] = {
lypinator 0:bb348c97df44 56 {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
lypinator 0:bb348c97df44 57 {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
lypinator 0:bb348c97df44 58 #ifdef MBED_CONF_TARGET_STDIO_UART_TX
lypinator 0:bb348c97df44 59 {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 // Connected to STDIO_UART_TX
lypinator 0:bb348c97df44 60 #endif
lypinator 0:bb348c97df44 61 #ifdef MBED_CONF_TARGET_STDIO_UART_RX
lypinator 0:bb348c97df44 62 {PA_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 // Connected to STDIO_UART_RX
lypinator 0:bb348c97df44 63 #endif
lypinator 0:bb348c97df44 64 {PA_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
lypinator 0:bb348c97df44 65 {PA_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 // Connected to LD2 [Green Led]
lypinator 0:bb348c97df44 66 {PA_6, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
lypinator 0:bb348c97df44 67 {PA_7, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
lypinator 0:bb348c97df44 68 {PB_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
lypinator 0:bb348c97df44 69 {PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
lypinator 0:bb348c97df44 70 {PC_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
lypinator 0:bb348c97df44 71 {PC_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
lypinator 0:bb348c97df44 72 {PC_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
lypinator 0:bb348c97df44 73 {PC_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
lypinator 0:bb348c97df44 74 {PC_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
lypinator 0:bb348c97df44 75 {PC_5, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
lypinator 0:bb348c97df44 76 {NC, NC, 0}
lypinator 0:bb348c97df44 77 };
lypinator 0:bb348c97df44 78
lypinator 0:bb348c97df44 79 MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
lypinator 0:bb348c97df44 80 {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)},
lypinator 0:bb348c97df44 81 {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)},
lypinator 0:bb348c97df44 82 {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)},
lypinator 0:bb348c97df44 83 {NC, NC, 0}
lypinator 0:bb348c97df44 84 };
lypinator 0:bb348c97df44 85
lypinator 0:bb348c97df44 86 //*** I2C ***
lypinator 0:bb348c97df44 87
lypinator 0:bb348c97df44 88 MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
lypinator 0:bb348c97df44 89 {PB_3, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)}, // Connected to SWO
lypinator 0:bb348c97df44 90 {PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
lypinator 0:bb348c97df44 91 {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
lypinator 0:bb348c97df44 92 {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
lypinator 0:bb348c97df44 93 {PC_9, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
lypinator 0:bb348c97df44 94 {NC, NC, 0}
lypinator 0:bb348c97df44 95 };
lypinator 0:bb348c97df44 96
lypinator 0:bb348c97df44 97 MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
lypinator 0:bb348c97df44 98 {PA_8, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
lypinator 0:bb348c97df44 99 {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
lypinator 0:bb348c97df44 100 {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
lypinator 0:bb348c97df44 101 {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
lypinator 0:bb348c97df44 102 {NC, NC, 0}
lypinator 0:bb348c97df44 103 };
lypinator 0:bb348c97df44 104
lypinator 0:bb348c97df44 105 //*** PWM ***
lypinator 0:bb348c97df44 106
lypinator 0:bb348c97df44 107 // TIM5 cannot be used because already used by the us_ticker
lypinator 0:bb348c97df44 108 MBED_WEAK const PinMap PinMap_PWM[] = {
lypinator 0:bb348c97df44 109 {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
lypinator 0:bb348c97df44 110 // {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
lypinator 0:bb348c97df44 111 {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
lypinator 0:bb348c97df44 112 // {PA_1, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
lypinator 0:bb348c97df44 113 #ifdef MBED_CONF_TARGET_STDIO_UART_TX
lypinator 0:bb348c97df44 114 {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 // Connected to STDIO_UART_TX
lypinator 0:bb348c97df44 115 // {PA_2, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 // Connected to STDIO_UART_TX
lypinator 0:bb348c97df44 116 {PA_2_ALT0, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 // Connected to STDIO_UART_TX
lypinator 0:bb348c97df44 117 #endif
lypinator 0:bb348c97df44 118 #ifdef MBED_CONF_TARGET_STDIO_UART_RX
lypinator 0:bb348c97df44 119 {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 // Connected to STDIO_UART_RX
lypinator 0:bb348c97df44 120 // {PA_3, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 // Connected to STDIO_UART_RX
lypinator 0:bb348c97df44 121 {PA_3_ALT0, PWM_9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 // Connected to STDIO_UART_RX
lypinator 0:bb348c97df44 122 #endif
lypinator 0:bb348c97df44 123 {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 // Connected to LD2 [Green Led]
lypinator 0:bb348c97df44 124 {PA_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
lypinator 0:bb348c97df44 125 {PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
lypinator 0:bb348c97df44 126 {PA_7_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
lypinator 0:bb348c97df44 127 {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
lypinator 0:bb348c97df44 128 {PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
lypinator 0:bb348c97df44 129 {PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
lypinator 0:bb348c97df44 130 {PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
lypinator 0:bb348c97df44 131 {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
lypinator 0:bb348c97df44 132 {PB_0, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
lypinator 0:bb348c97df44 133 {PB_0_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
lypinator 0:bb348c97df44 134 {PB_1, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
lypinator 0:bb348c97df44 135 {PB_1_ALT0, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
lypinator 0:bb348c97df44 136 {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 // Connected to SWO
lypinator 0:bb348c97df44 137 {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
lypinator 0:bb348c97df44 138 {PB_5, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
lypinator 0:bb348c97df44 139 {PB_6, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
lypinator 0:bb348c97df44 140 {PB_7, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
lypinator 0:bb348c97df44 141 {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
lypinator 0:bb348c97df44 142 {PB_8_ALT0, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
lypinator 0:bb348c97df44 143 {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
lypinator 0:bb348c97df44 144 {PB_9_ALT0, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
lypinator 0:bb348c97df44 145 {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
lypinator 0:bb348c97df44 146 {PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
lypinator 0:bb348c97df44 147 {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
lypinator 0:bb348c97df44 148 {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
lypinator 0:bb348c97df44 149 {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
lypinator 0:bb348c97df44 150 {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
lypinator 0:bb348c97df44 151 {PC_8, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
lypinator 0:bb348c97df44 152 {PC_9, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
lypinator 0:bb348c97df44 153 {NC, NC, 0}
lypinator 0:bb348c97df44 154 };
lypinator 0:bb348c97df44 155
lypinator 0:bb348c97df44 156 //*** SERIAL ***
lypinator 0:bb348c97df44 157
lypinator 0:bb348c97df44 158 MBED_WEAK const PinMap PinMap_UART_TX[] = {
lypinator 0:bb348c97df44 159 {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_TX
lypinator 0:bb348c97df44 160 {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
lypinator 0:bb348c97df44 161 {PA_11, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
lypinator 0:bb348c97df44 162 {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
lypinator 0:bb348c97df44 163 {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
lypinator 0:bb348c97df44 164 {NC, NC, 0}
lypinator 0:bb348c97df44 165 };
lypinator 0:bb348c97df44 166
lypinator 0:bb348c97df44 167 MBED_WEAK const PinMap PinMap_UART_RX[] = {
lypinator 0:bb348c97df44 168 {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_RX
lypinator 0:bb348c97df44 169 {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
lypinator 0:bb348c97df44 170 {PA_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
lypinator 0:bb348c97df44 171 {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
lypinator 0:bb348c97df44 172 {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
lypinator 0:bb348c97df44 173 {NC, NC, 0}
lypinator 0:bb348c97df44 174 };
lypinator 0:bb348c97df44 175
lypinator 0:bb348c97df44 176 MBED_WEAK const PinMap PinMap_UART_RTS[] = {
lypinator 0:bb348c97df44 177 {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
lypinator 0:bb348c97df44 178 {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
lypinator 0:bb348c97df44 179 {NC, NC, 0}
lypinator 0:bb348c97df44 180 };
lypinator 0:bb348c97df44 181
lypinator 0:bb348c97df44 182 MBED_WEAK const PinMap PinMap_UART_CTS[] = {
lypinator 0:bb348c97df44 183 {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
lypinator 0:bb348c97df44 184 {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
lypinator 0:bb348c97df44 185 {NC, NC, 0}
lypinator 0:bb348c97df44 186 };
lypinator 0:bb348c97df44 187
lypinator 0:bb348c97df44 188 //*** SPI ***
lypinator 0:bb348c97df44 189
lypinator 0:bb348c97df44 190 MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
lypinator 0:bb348c97df44 191 {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
lypinator 0:bb348c97df44 192 {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
lypinator 0:bb348c97df44 193 {PB_5_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 194 {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
lypinator 0:bb348c97df44 195 {PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
lypinator 0:bb348c97df44 196 {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 197 {NC, NC, 0}
lypinator 0:bb348c97df44 198 };
lypinator 0:bb348c97df44 199
lypinator 0:bb348c97df44 200 MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
lypinator 0:bb348c97df44 201 {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
lypinator 0:bb348c97df44 202 {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
lypinator 0:bb348c97df44 203 {PB_4_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 204 {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
lypinator 0:bb348c97df44 205 {PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
lypinator 0:bb348c97df44 206 {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 207 {NC, NC, 0}
lypinator 0:bb348c97df44 208 };
lypinator 0:bb348c97df44 209
lypinator 0:bb348c97df44 210 MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
lypinator 0:bb348c97df44 211 {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to LD2 [Green Led]
lypinator 0:bb348c97df44 212 {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to SWO
lypinator 0:bb348c97df44 213 {PB_3_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)}, // Connected to SWO
lypinator 0:bb348c97df44 214 {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
lypinator 0:bb348c97df44 215 {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
lypinator 0:bb348c97df44 216 {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 217 {NC, NC, 0}
lypinator 0:bb348c97df44 218 };
lypinator 0:bb348c97df44 219
lypinator 0:bb348c97df44 220 MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
lypinator 0:bb348c97df44 221 {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
lypinator 0:bb348c97df44 222 {PA_4_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 223 {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
lypinator 0:bb348c97df44 224 {PA_15_ALT0, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
lypinator 0:bb348c97df44 225 {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
lypinator 0:bb348c97df44 226 {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
lypinator 0:bb348c97df44 227 {NC, NC, 0}
lypinator 0:bb348c97df44 228 };