Luis Silvio Cordova Rivadeneira
/
UPSM_W3_ESP8266
Comandos AT para modulo ESP8266
Revision 0:b9712fa89244, committed 2020-02-14
- Comitter:
- lscordovar
- Date:
- Fri Feb 14 00:31:34 2020 +0000
- Commit message:
- Ejemplo de configuracion del modulo ESP8266
Changed in this revision
main.cpp | Show annotated file Show diff for this revision Revisions of this file |
mbed.bld | Show annotated file Show diff for this revision Revisions of this file |
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Fri Feb 14 00:31:34 2020 +0000 @@ -0,0 +1,92 @@ +/********************************************************************** + ESP-01 BOARD RELAY CONTROL + ========================== +AT+RST Reset ESP-01 +AT+CWMODE Set ESP-01 mode (here it is set to Station mode) +AT+CWJAP Set Wi-Fi ssid name and password +AT+CPIMUX Set connection mode (here it is set to multiple connection) +AT+CIFSR Returns the IP address (not used here) +AT+CIPSTART Set TCP or UDP connection mode, destination IP address, and port number (here, UDP is used +with port number set to 5000. Destination IP address is set to “0.0.0.0” so that any device can +connect and send data over Port 5000). + + +Testing the Program +The program can easily be tested with a mobile phone. You should install this app in the Play Store +UDPSender by hastarin + +The steps to test the program are as follows: +• Construct the circuit. +• Compile and download the program to your development board. +• Start the UDP Server apps on your mobile phone and set the Port number to 5000 and the +destination IP address (ESP-01 IP address, which was 192.168.1.160 in this project). + +Enter command ON1 followed by the Enter key (required for the scanf function) on the mobile +phone. Click Send to send the command to the development board. Relay 1 should now +become active and the red LED corresponding to this relay will turn ON + +**********************************************************************/ +#include "mbed.h" +// +// Define the expansion board to development board UART connections +// +#define TX PB_6//PA_9 // UART TX +#define RX PB_7//PA_10 // UART RX +//Serial esp(TX, RX); // UART TX,RX +Serial esp(PA_2,PA_3); +//Serial esp(PB_6,PB_7); // tx, rx +// +// Configure all relays as outputs and de-activate all relays +// +DigitalOut Relay1(PC_0, 1); +DigitalOut Relay2(PC_1, 1); +DigitalOut Relay3(PC_2, 1); +DigitalOut Relay4(PC_3, 1); +// +// This function connects to the Wi-Fi +// +void ConnectToWiFi() +{ + esp.printf("AT+RST\r\n"); + wait(2); + + esp.printf("AT+CWMODE=1\r\n"); + wait(3); + + esp.printf("AT+CWJAP=\"BTHomeSpot-XNH\",\"49346abaeb\"\r\n"); + wait(10); + + esp.printf("AT+CPIMUX=1\r\n"); + wait(3); + + esp.printf("AT+CIFSR\r\n"); + wait(3); + + esp.printf("AT+CIPSTART=\"UDP\",\"192.168.1.178\",0,5000,2\r\n"); + wait(3); +} +int main() +{ + char Buffer[80]; // Buffer to store data + esp.baud(115200); // Set baud rate to 115200 + ConnectToWiFi(); // Connect to Wi-Fi +// Receive data packets over UDP and activate/de-activate the +// required relay. Function strstr(a,"b") returns a value greater than +// 0 if string a contains sub-string "b". The command sent by the +// mobile devuce must be terminated with an Enter key (required for +// the scanf function). Buffer is cleared at the beginning of the loop +// + while(1) { + for(int k = 0; k < 5; k++)Buffer[k] = 0; + + esp.scanf("%s",&Buffer); + if(strstr(Buffer, "ON1") > 0) Relay1 = 0; + else if(strstr(Buffer,"ON2") > 0) Relay2 = 0; + else if(strstr(Buffer, "ON3")> 0) Relay3 = 0; + else if(strstr(Buffer, "ON4") > 0) Relay4 = 0; + else if(strstr(Buffer, "OFF1") > 0)Relay1 = 1; + else if(strstr(Buffer, "OFF2") > 0)Relay2 = 1; + else if(strstr(Buffer, "OFF3") > 0)Relay3 = 1; + else if(strstr(Buffer, "OFF4") > 0)Relay4 = 1; + } +} \ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Fri Feb 14 00:31:34 2020 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/mbed_official/code/mbed/builds/65be27845400 \ No newline at end of file