wei zou / ARCH_GPRS_Xively

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Dependencies:   GPRS mbed

Fork of USB2UART by Yihui Xiong

You are viewing an older revision! See the latest version

Homepage

Table of Contents

  1. ARCH GPRS With Xively
  2. ARCH GPRS Introduction
  3. Code

ARCH GPRS With Xively

IOT Architecture

  • Xively is an on-line database service allowing developers to connect sensor-derived data (e.g. energy and environment data from objects, devices & buildings) to the Web and to build their own applications based on that data,to know more, visit https://xively.com/
  • Here, we use ARCH GPRS to post our sensor data(temperature/light/humidity etc.) to Xively.

ARCH GPRS Introduction

ARCH GPRS

  • Arch GPRS is a wireless network module based on EG-10, it can achive remote data colletion function to communicate with outside world by GPRS network.
  • Arch GPRS has standard Arduino interface and Grove connectors. It’s convenient to connect existing Shields and Grove products to Arch GPRS.
  • You can use the solar panel to charge for battery, and own to its low-power design, so Arch GPRS can work normally in outdoor.
  • For more information, please visit http://www.seeedstudio.com/wiki/Arch_GPRS

Code

  • Description: this demo is used as posting value of sound sensor to Xively every 10 seconds.
  • Attention: you need to replace the PHONE_NUMBER/FEED_ID/SENSOR_ID/XIVELY_KEY with yours.

main.cpp

#include "gprs.h"
 
#define PHONE_NUMBER    "139****7382"
#define IP_ADDRSS       "216.52.233.120" //api.xively.com
#define PORT            "80" //port addr
#define FEED_ID         "your feeed ID"
#define SENSOR_ID       "your sensor ID"
#define XIVELY_KEY      "your Xively Key"
#define REQUEST_LENGTH  36
#define DATA_LENGTH     90
#define HEAD_LEN        270
 
#define PINPWR          P1_2    // power on EG 10, low enable
#define PINONOFF        P1_7    // switch of EG10, low enable, low for 2s to turn on EG10
 
DigitalOut eg10_pwr(PINPWR);
DigitalOut eg10_on(PINONOFF);
GPRS gprs(USBTX, USBRX,115200,PHONE_NUMBER);
AnalogIn soundSensor(P0_11);
 
void EG10_PowerUp(void)
{
    eg10_pwr = 1;
    eg10_on  = 1;
    wait(2);
    eg10_pwr = 0;
    eg10_on = 0;
    wait(2);
    eg10_on = 1;
    wait(2);
}
 
int putDataToXively(float sensorValue)
{
    char request[REQUEST_LENGTH];
    char dataStream[DATA_LENGTH];
    char head[HEAD_LEN];
    snprintf(request,REQUEST_LENGTH,"PUT /v2/feeds/%s HTTP/1.1\r\n",FEED_ID);
    snprintf(dataStream,DATA_LENGTH,"{\"version\":\"1.0.0\", \"datastreams\" : [{ \"id\" : \"%s\", \"current_value\" : \"%f\"}]}\r\n",SENSOR_ID,sensorValue);
    int dataLen = strlen(dataStream);
    snprintf(head,HEAD_LEN,"%sHost: api.xively.com\r\nX-ApiKey: %s\r\nUser-Agent: Xively-Arduino-Lib/1.0\r\nContent-Length: %d\r\n\r\n%s",request,XIVELY_KEY,dataLen,dataStream);
    if(0 != gprs.connectTCP(IP_ADDRSS,PORT)) {
        goto STOP;
    }
    wait(5);
    if(0 != gprs.sendTCPData(head)) {
        goto STOP;
    }
STOP:
    gprs.closeTCP();
    return 0;
}
 
int main()
{
    EG10_PowerUp();
    while(0 != gprs.init()) {
        wait(2);
    }
    while(1) {
        putDataToXively(10*soundSensor.read());
        wait(10);
    }
}
All wikipages