![](/media/cache/profiles/56f9e53c06985234d40a35145c1a919e.jpg.50x50_q85.jpg)
seeedstudio ARCH GPRS Test for GPRS function
Fork of ARCH_GPRS_Demo by
ARCH GPRS Introduction
- Arch GPRS is a wireless network module based on EG-10, it can achive remote data colletion function to communicate with outside world by GPRS network.
- Arch GPRS has standard Arduino interface and Grove connectors. It’s convenient to connect existing Shields and Grove products to Arch GPRS.
- You can use the solar panel to charge for battery, and own to its low-power design, so Arch GPRS can work normally in outdoor.
- For more information, please visit http://www.seeedstudio.com/depot/arch-gprs-p-1657.html?cPath=6_11
main.cpp
/* main.cpp 2013 Copyright (c) Seeed Technology Inc. All right reserved. Author:lawliet zou(lawliet.zou@gmail.com) 2013-7-21 This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include "mbed.h" #include "string.h" #include "gprs.h" #define SEND_SMS_TEST 0 #define CALL_UP_TEST 0 #define ANSWER_TEST 0 #define READ_SMS_TEST 0 #define PHONE_NUMBER "150****9566" #define PINPWR P1_2 // power on EG 10, low enable #define PINONOFF P1_7 // switch of EG10, low enable, low for 2s to turn on EG10 DigitalOut eg10_pwr(PINPWR); DigitalOut eg10_on(PINONOFF); GPRS gprsTest(P0_19, P0_18, 115200, PHONE_NUMBER); void EG10_PowerUp(void) { eg10_pwr = 1; eg10_on = 1; wait(2); eg10_pwr = 0; eg10_on = 0; wait(2); eg10_on = 1; wait(2); } int main(void) { EG10_PowerUp(); while(0 != gprsTest.init()) { wait(2); } #if CALL_UP_TEST gprsTest.callUp(PHONE_NUMBER); #endif #if SEND_SMS_TEST gprsTest.sendSMS(PHONE_NUMBER,"hello,lawliet"); #endif #if ANSWER_TEST || READ_SMS_TEST while(1) { int messageType = gprsTest.loopHandle(); if(MESSAGE_RING == messageType) { gprsTest.answer(); } else if(MESSAGE_SMS == messageType) { char smsMessage[SMS_MAX_LENGTH]; gprsTest.getSMS(smsMessage); } } #endif return 0; }
Diff: ARCH_GPRS_HW/ARCH_GPRS_HW_DFS.h
- Revision:
- 0:6d297fe482af
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/ARCH_GPRS_HW/ARCH_GPRS_HW_DFS.h Fri Aug 23 02:31:06 2013 +0000 @@ -0,0 +1,67 @@ +/* + IOT_hw_dfs.h + 2013 Copyright (c) Seeed Technology Inc. All right reserved. + + Author:Loovee + 2013-7-21 + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef __ARCH_GPRS_HW_DFS_H__ +#define __ARCH_GPRS_HW_DFS_H__ + +// pin define +#define PINPWR P1_2 // power on EG 10, low enable +#define PINONOFF P1_7 // switch of EG10, low enable, low for 2s to turn on EG10 +#define PINTX P0_18 // EG10 TX +#define PINRX P0_19 // EG10 RX +#define PINSYSRST P1_6 // EG10 RST,high enable +#define PINEGSTATE P1_15 // in and out, read eg10 state, HIGH: on, LOW: off + + +// grove pin +#define GROVE_I2C_SCL P0_4 // grove i2c pin +#define GROVE_I2C_SDA P0_5 // grove i2c sda + +#define GROVE_UART_RX P0_14 // grove uart rx +#define GROVE_UART_TX P0_13 // grove uart tx + +#define GROVE_ADC_1 P0_12 // grove ADC, the outside one +#define GROVE_ADC_2 P0_11 // grove ADC, the other one + +#define GROVE_PWR P1_3 // control all grove power, low enable + +// charge circuit +#define PIN_CHRGING P1_1 // charging, low enable +#define PIN_CHRGDONE P1_0 // charge done +#define PIN_READBAT P0_23 // battery voltage in, the value should x2 + +// led pin +#define PINLED1 P1_8 +#define PINLED2 P1_9 +#define PINLED3 P1_10 +#define PINLED4 P1_11 + +// charge state +#define CHRGING 1 +#define CHRGDONE 2 +#define NOCHRG 3 + +#endif + +/********************************************************************************************************* + END FILE +*********************************************************************************************************/