Revision 4:a52949a1cf72, committed 2018-05-16

Comitter:

krenbluetoothsig

Date:

Wed May 16 03:43:25 2018 +0000

Parent:

3:9259d5a8a3f2

Commit message:

1. final version before Bluetooth Asia 2018.

Changed in this revision

diff -r 9259d5a8a3f2 -r a52949a1cf72 README.txt
--- a/README.txt	Mon May 07 23:58:09 2018 +0000
+++ b/README.txt	Wed May 16 03:43:25 2018 +0000
@@ -1,60 +1,42 @@
-
-**
 EULA
-**
-
-PLEASE READ EULA.TXT BEFORE START DEVELOPMENT. 
-
-**
-Overview
-**
+PLEASE READ MESH_DEMO_TUTORIAL_EULA.TXT BEFORE START DEVELOPMENT.
 
-This sample demonstrates Bluetooth Mesh functionality on micro:bit, www.microbit.org. 
-It doesn't need provisioning because all the credential material (DevKey, NetKey, AppKey, Key Index, IVI 
-and Unicast address) is pre-configured. 
-This sample work as a GenericOnOff server:
-* Pressing Button B on micro:bit will subscribe to the group address from 0xC000 to 0xC003 and back to 
-  0xC000 again like round robin; 
+Overview
+This sample demonstrates Bluetooth Mesh functionality on micro:bit, www.microbit.org. It doesn't need provisioning because all the credential material (DevKey, NetKey, AppKey, Key Index, IVI and Unicast address) is pre-configured. This sample work as a GenericOnOff server:
 
-**
+Pressing Button B on micro:bit will subscribe to the group address from 0xC000 to 0xC003 and back to 0xC000 again like round robin;
 Requirements
-**
-
 micro:bit board
 
-**
 Building and Running
-**
+0. Download source code, it's zip file, the link is on this page, Download repository.
 
-1. Following below link to set the development environment up on your Windows computer. 
-http://docs.zephyrproject.org/getting_started/installation_win.html 
+1. Following below link to set the development environment up on your Windows computer. http://docs.zephyrproject.org/getting_started/installation_win.html
 
-2. copy zip file into './zephyr/sample/' in the Zephyr tree. 
+2. copy zip file into ./zephyr/samples/ in the Zephyr tree.
 
-3. unzip the file by "Extract Here". 
+3. unzip the file by "Extract Here".
 
 3. access into the extracted folder and rename prj_bbc_microbit.txt to prj_bbc_microbit.conf
 
-4. if adopting Windows Command Prompt, use it to access into the unzip folder and
-   type following commands on the console:
+4. if adopting Windows Command Prompt, use it to access into the unzip folder and type following commands on the console:
+
+mkdir build & cd build
 
-     mkdir build & cd build
-     cmake -GNinja -DBOARD=bbc_microbit ..
-     ninja
+cmake -GNinja -DBOARD=bbc_microbit ..
 
+ninja
 
-   if adopting MSYS2, use it to access into the unzip folder and type following commands
-   on the console:
+if adopting MSYS2, use it to access into the unzip folder and type following commands on the console:
 
-     mkdir build & cd build
-     cmake -GNinja -DBOARD=bbc_microbit ..
-     ninja
+mkdir build & cd build
+
+cmake -GNinja -DBOARD=bbc_microbit ..
+
+ninja
 
-5. connect micro:bit with your computer by USB cable, the board will be enumerated as a massive
-   storage device;
+5. connect micro:bit with your computer by USB cable, the board will be enumerated as a massive storage device;
 
-6. drag the hex file (which is in './zephyr/sample/[unzip folder]/build/zephyr/zephyr.hex') into 
-   Microbit massive storage device to flash the firmware;
-   
-7. micro:bit is ready to work as a GenericOnOff server. 
+6. drag the hex file (which is in ./zephyr/sample/[unzip folder]/build/zephyr/zephyr.hex) into Microbit massive storage device to flash the firmware;
 
+7. micro:bit is ready to work as a GenericOnOff server.
\ No newline at end of file

diff -r 9259d5a8a3f2 -r a52949a1cf72 prj_bbc_microbit.txt
--- a/prj_bbc_microbit.txt	Mon May 07 23:58:09 2018 +0000
+++ b/prj_bbc_microbit.txt	Wed May 16 03:43:25 2018 +0000
@@ -17,6 +17,8 @@
 CONFIG_BT_BROADCASTER=y
 CONFIG_BT_PRIVACY=n
 
+CONFIG_BT_MESH_DEBUG_USE_ID_ADDR=y
+
 CONFIG_BT_MESH=y
 CONFIG_BT_MESH_RELAY=y
 CONFIG_BT_MESH_RX_SDU_MAX=36

diff -r 9259d5a8a3f2 -r a52949a1cf72 src/main.c
--- a/src/main.c	Mon May 07 23:58:09 2018 +0000
+++ b/src/main.c	Wed May 16 03:43:25 2018 +0000
@@ -421,13 +421,14 @@
 }
 
 static struct bt_mesh_cfg_srv cfg_srv = {
-#if defined(CONFIG_BOARD_BBC_MICROBIT)
-    .relay = BT_MESH_RELAY_ENABLED,
+//#if defined(CONFIG_BOARD_BBC_MICROBIT)
+//  .relay = BT_MESH_RELAY_ENABLED,
+//  //.relay = BT_MESH_RELAY_DISABLED,
+//  .beacon = BT_MESH_BEACON_DISABLED,
+//#else
+    .relay = BT_MESH_RELAY_DISABLED,
     .beacon = BT_MESH_BEACON_DISABLED,
-#else
-    .relay = BT_MESH_RELAY_ENABLED,
-    .beacon = BT_MESH_BEACON_ENABLED,
-#endif
+//#endif
     .frnd = BT_MESH_FRIEND_NOT_SUPPORTED,
     .default_ttl = 7,