Publishing for Bluetooth Asia 2018 developer session: mesh session. This repo is for GenericOnOff server side firmware.
EULA
PLEASE READ MESH_DEMO_TUTORIAL_EULA.TXT BEFORE START DEVELOPMENT.
Overview
This sample demonstrates Bluetooth Mesh functionality on micro:bit, www.microbit.org. It doesn't need provisioning because all the credential material (DevKey, NetKey, AppKey, Key Index, IVI and Unicast address) is pre-configured. This sample work as a GenericOnOff server:
- Pressing Button B on micro:bit will subscribe to the group address from 0xC000 to 0xC003 and back to 0xC000 again like round robin;
Requirements
micro:bit board
Building and Running
0. Download source code, it's zip file, the link is on this page, Download repository
.
1. Following below link to set the development environment up on your Windows computer. http://docs.zephyrproject.org/getting_started/installation_win.html Please make sure git checkout this commit, commit: 60b01f3f5489975098657caa514133c89a472d19 , the detail is here, https://github.com/zephyrproject-rtos/zephyr/commit/60b01f3f5489975098657caa514133c89a472d19
2. copy zip file into ./zephyr/samples/
in the Zephyr tree.
3. unzip the file by "Extract Here".
3. access into the extracted folder and rename prj_bbc_microbit.txt
to prj_bbc_microbit.conf
4. if adopting Windows Command Prompt, use it to access into the unzip folder and type following commands on the console:
mkdir build & cd build
cmake -GNinja -DBOARD=bbc_microbit ..
ninja
if adopting MSYS2, use it to access into the unzip folder and type following commands on the console:
mkdir build & cd build
cmake -GNinja -DBOARD=bbc_microbit ..
ninja
5. connect micro:bit with your computer by USB cable, the board will be enumerated as a massive storage device;
6. drag the hex file (which is in ./zephyr/sample/[unzip folder]/build/zephyr/zephyr.hex
) into
Microbit massive storage device to flash the firmware;
7. micro:bit is ready to work as a GenericOnOff server.
Diff: README.txt
- Revision:
- 4:a52949a1cf72
- Parent:
- 2:0aac7f4770d9
diff -r 9259d5a8a3f2 -r a52949a1cf72 README.txt --- a/README.txt Mon May 07 23:58:09 2018 +0000 +++ b/README.txt Wed May 16 03:43:25 2018 +0000 @@ -1,60 +1,42 @@ - -** EULA -** - -PLEASE READ EULA.TXT BEFORE START DEVELOPMENT. - -** -Overview -** +PLEASE READ MESH_DEMO_TUTORIAL_EULA.TXT BEFORE START DEVELOPMENT. -This sample demonstrates Bluetooth Mesh functionality on micro:bit, www.microbit.org. -It doesn't need provisioning because all the credential material (DevKey, NetKey, AppKey, Key Index, IVI -and Unicast address) is pre-configured. -This sample work as a GenericOnOff server: -* Pressing Button B on micro:bit will subscribe to the group address from 0xC000 to 0xC003 and back to - 0xC000 again like round robin; +Overview +This sample demonstrates Bluetooth Mesh functionality on micro:bit, www.microbit.org. It doesn't need provisioning because all the credential material (DevKey, NetKey, AppKey, Key Index, IVI and Unicast address) is pre-configured. This sample work as a GenericOnOff server: -** +Pressing Button B on micro:bit will subscribe to the group address from 0xC000 to 0xC003 and back to 0xC000 again like round robin; Requirements -** - micro:bit board -** Building and Running -** +0. Download source code, it's zip file, the link is on this page, Download repository. -1. Following below link to set the development environment up on your Windows computer. -http://docs.zephyrproject.org/getting_started/installation_win.html +1. Following below link to set the development environment up on your Windows computer. http://docs.zephyrproject.org/getting_started/installation_win.html -2. copy zip file into './zephyr/sample/' in the Zephyr tree. +2. copy zip file into ./zephyr/samples/ in the Zephyr tree. -3. unzip the file by "Extract Here". +3. unzip the file by "Extract Here". 3. access into the extracted folder and rename prj_bbc_microbit.txt to prj_bbc_microbit.conf -4. if adopting Windows Command Prompt, use it to access into the unzip folder and - type following commands on the console: +4. if adopting Windows Command Prompt, use it to access into the unzip folder and type following commands on the console: + +mkdir build & cd build - mkdir build & cd build - cmake -GNinja -DBOARD=bbc_microbit .. - ninja +cmake -GNinja -DBOARD=bbc_microbit .. +ninja - if adopting MSYS2, use it to access into the unzip folder and type following commands - on the console: +if adopting MSYS2, use it to access into the unzip folder and type following commands on the console: - mkdir build & cd build - cmake -GNinja -DBOARD=bbc_microbit .. - ninja +mkdir build & cd build + +cmake -GNinja -DBOARD=bbc_microbit .. + +ninja -5. connect micro:bit with your computer by USB cable, the board will be enumerated as a massive - storage device; +5. connect micro:bit with your computer by USB cable, the board will be enumerated as a massive storage device; -6. drag the hex file (which is in './zephyr/sample/[unzip folder]/build/zephyr/zephyr.hex') into - Microbit massive storage device to flash the firmware; - -7. micro:bit is ready to work as a GenericOnOff server. +6. drag the hex file (which is in ./zephyr/sample/[unzip folder]/build/zephyr/zephyr.hex) into Microbit massive storage device to flash the firmware; +7. micro:bit is ready to work as a GenericOnOff server. \ No newline at end of file