Naresh Krish
Sample program on how to use the LIS2MDL sensor on the RAKWirelss iTracker module
segger-rtt/SEGGER_RTT_Conf.h
- Committer:
- knaresh89
- Date:
- 2018-02-12
- Revision:
- 0:a8bfd25ff975
File content as of revision 0:a8bfd25ff975:
/*********************************************************************
* SEGGER MICROCONTROLLER GmbH & Co. KG *
* Solutions for real time microcontroller applications *
**********************************************************************
* *
* (c) 2014 - 2016 SEGGER Microcontroller GmbH & Co. KG *
* *
* www.segger.com Support: support@segger.com *
* *
**********************************************************************
* *
* SEGGER RTT * Real Time Transfer for embedded targets *
* *
**********************************************************************
* *
* All rights reserved. *
* *
* SEGGER strongly recommends to not make any changes *
* to or modify the source code of this software in order to stay *
* compatible with the RTT protocol and J-Link. *
* *
* Redistribution and use in source and binary forms, with or *
* without modification, are permitted provided that the following *
* conditions are met: *
* *
* o Redistributions of source code must retain the above copyright *
* notice, this list of conditions and the following disclaimer. *
* *
* o Redistributions in binary form must reproduce the above *
* copyright notice, this list of conditions and the following *
* disclaimer in the documentation and/or other materials provided *
* with the distribution. *
* *
* o Neither the name of SEGGER Microcontroller GmbH & Co. KG *
* nor the names of its contributors may be used to endorse or *
* promote products derived from this software without specific *
* prior written permission. *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE. *
* *
**********************************************************************
---------------------------END-OF-HEADER------------------------------
File : SEGGER_RTT_Conf.h
Purpose : Implementation of SEGGER real-time transfer (RTT) which
allows real-time communication on targets which support
debugger memory accesses while the CPU is running.
Revision: $Rev: 5504 $
----------------------------------------------------------------------
*/
#ifndef SEGGER_RTT_CONF_H
#define SEGGER_RTT_CONF_H
#ifdef __IAR_SYSTEMS_ICC__
#include <intrinsics.h>
#endif
/*********************************************************************
*
* Defines, configurable
*
**********************************************************************
*/
#define SEGGER_RTT_MAX_NUM_UP_BUFFERS (3) // Max. number of up-buffers (T->H) available on this target (Default: 3)
#define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS (3) // Max. number of down-buffers (H->T) available on this target (Default: 3)
#define BUFFER_SIZE_UP (1024) // Size of the buffer for terminal output of target, up to host (Default: 1k)
#define BUFFER_SIZE_DOWN (16) // Size of the buffer for terminal input to target from host (Usually keyboard input) (Default: 16)
#define SEGGER_RTT_PRINTF_BUFFER_SIZE (64u) // Size of buffer for RTT printf to bulk-send chars via RTT (Default: 64)
#define SEGGER_RTT_MODE_DEFAULT SEGGER_RTT_MODE_NO_BLOCK_SKIP // Mode for pre-initialized terminal channel (buffer 0)
//
// Target is not allowed to perform other RTT operations while string still has not been stored completely.
// Otherwise we would probably end up with a mixed string in the buffer.
// If using RTT from within interrupts, multiple tasks or multi processors, define the SEGGER_RTT_LOCK() and SEGGER_RTT_UNLOCK() function here.
//
// SEGGER_RTT_MAX_INTERRUPT_PRIORITY can be used in the sample lock routines on Cortex-M3/4.
// Make sure to mask all interrupts which can send RTT data, i.e. generate SystemView events, or cause task switches.
// When high-priority interrupts must not be masked while sending RTT data, SEGGER_RTT_MAX_INTERRUPT_PRIORITY needs to be adjusted accordingly.
// (Higher priority = lower priority number)
// Default value for embOS: 128u
// Default configuration in FreeRTOS: configMAX_SYSCALL_INTERRUPT_PRIORITY: ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
// In case of doubt mask all interrupts: 1 << (8 - BASEPRI_PRIO_BITS) i.e. 1 << 5 when 3 bits are implemented in NVIC
// or define SEGGER_RTT_LOCK() to completely disable interrupts.
//
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) // Interrupt priority to lock on SEGGER_RTT_LOCK on Cortex-M3/4 (Default: 0x20)
/*********************************************************************
*
* RTT lock configuration for SEGGER Embedded Studio,
* Rowley CrossStudio and GCC
*/
#if (defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)
#ifdef __ARM_ARCH_6M__
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
__asm volatile ("mrs %0, primask \n\t" \
"mov r1, $1 \n\t" \
"msr primask, r1 \n\t" \
: "=r" (LockState) \
: \
: "r1" \
);
#define SEGGER_RTT_UNLOCK() __asm volatile ("msr primask, %0 \n\t" \
: \
: "r" (LockState) \
: \
); \
}
#elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
__asm volatile ("mrs %0, basepri \n\t" \
"mov r1, %1 \n\t" \
"msr basepri, r1 \n\t" \
: "=r" (LockState) \
: "i"(SEGGER_RTT_MAX_INTERRUPT_PRIORITY) \
: "r1" \
);
#define SEGGER_RTT_UNLOCK() __asm volatile ("msr basepri, %0 \n\t" \
: \
: "r" (LockState) \
: \
); \
}
#elif defined(__ARM_ARCH_7A__)
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
__asm volatile ("mrs r1, CPSR \n\t" \
"mov %0, r1 \n\t" \
"orr r1, r1, #0xC0 \n\t" \
"msr CPSR_c, r1 \n\t" \
: "=r" (LockState) \
: \
: "r1" \
);
#define SEGGER_RTT_UNLOCK() __asm volatile ("mov r0, %0 \n\t" \
"mrs r1, CPSR \n\t" \
"bic r1, r1, #0xC0 \n\t" \
"and r0, r0, #0xC0 \n\t" \
"orr r1, r1, r0 \n\t" \
"msr CPSR_c, r1 \n\t" \
: \
: "r" (LockState) \
: "r0", "r1" \
); \
}
#else
#define SEGGER_RTT_LOCK()
#define SEGGER_RTT_UNLOCK()
#endif
#endif
/*********************************************************************
*
* RTT lock configuration for IAR EWARM
*/
#ifdef __ICCARM__
#if (defined (__ARM6M__) && (__CORE__ == __ARM6M__))
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
LockState = __get_PRIMASK(); \
__set_PRIMASK(1);
#define SEGGER_RTT_UNLOCK() __set_PRIMASK(LockState); \
}
#elif ((defined (__ARM7EM__) && (__CORE__ == __ARM7EM__)) || (defined (__ARM7M__) && (__CORE__ == __ARM7M__)))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
LockState = __get_BASEPRI(); \
__set_BASEPRI(SEGGER_RTT_MAX_INTERRUPT_PRIORITY);
#define SEGGER_RTT_UNLOCK() __set_BASEPRI(LockState); \
}
#endif
#endif
/*********************************************************************
*
* RTT lock configuration for IAR RX
*/
#ifdef __ICCRX__
#define SEGGER_RTT_LOCK() { \
unsigned long LockState; \
LockState = __get_interrupt_state(); \
__disable_interrupt();
#define SEGGER_RTT_UNLOCK() __set_interrupt_state(LockState); \
}
#endif
/*********************************************************************
*
* RTT lock configuration for KEIL ARM
*/
#ifdef __CC_ARM
#if (defined __TARGET_ARCH_6S_M)
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
register unsigned char PRIMASK __asm( "primask"); \
LockState = PRIMASK; \
PRIMASK = 1u; \
__schedule_barrier();
#define SEGGER_RTT_UNLOCK() PRIMASK = LockState; \
__schedule_barrier(); \
}
#elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
register unsigned char BASEPRI __asm( "basepri"); \
LockState = BASEPRI; \
BASEPRI = SEGGER_RTT_MAX_INTERRUPT_PRIORITY; \
__schedule_barrier();
#define SEGGER_RTT_UNLOCK() BASEPRI = LockState; \
__schedule_barrier(); \
}
#endif
#endif
/*********************************************************************
*
* RTT lock configuration for TI ARM
*/
#ifdef __TI_ARM__
#if defined (__TI_ARM_V6M0__)
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
LockState = __get_PRIMASK(); \
__set_PRIMASK(1);
#define SEGGER_RTT_UNLOCK() __set_PRIMASK(LockState); \
}
#elif (defined (__TI_ARM_V7M3__) || defined (__TI_ARM_V7M4__))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
LockState = OS_GetBASEPRI(); \
OS_SetBASEPRI(SEGGER_RTT_MAX_INTERRUPT_PRIORITY);
#define SEGGER_RTT_UNLOCK() OS_SetBASEPRI(LockState); \
}
#endif
#endif
/*********************************************************************
*
* RTT lock configuration fallback
*/
#ifndef SEGGER_RTT_LOCK
#define SEGGER_RTT_LOCK() // Lock RTT (nestable) (i.e. disable interrupts)
#endif
#ifndef SEGGER_RTT_UNLOCK
#define SEGGER_RTT_UNLOCK() // Unlock RTT (nestable) (i.e. enable previous interrupt lock state)
#endif
#endif
/*************************** End of file ****************************/