![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Austin Community College initial line follower program for Freescale car. This is based upon the FRDM-TFC code at mbed.org.
Fork of FRDM-TFC by
Austin Community College - Initial Specs for FRDM-TFC line following car.
This uses the fine library by ELI HUGHES.
Our goal here is to provide the simplest line-follower as a quick car checkout.
First, we limit the run duration for the car, so that you can catch it, if necessary. Right DIP switch (4) sets run time. 0 => 5 sec, 1 => 10 sec.
We provide simple speed selection with the other three DIP switches. I recommend 001 as the slowest real speed, (000 is stop, of course). DIP switches 1 2 3 make a 3 bit speed. 1 is msb, 3 is lsb
The car won't start until you press and release the driver's side PB. Left PB (TFC_PUSH_BUTTON_1) is permissive GO on release using left 3 DIPs for speed 0-7.
The car will stop when the passenger side PB is pressed. Right PB is STOP - TFC_PUSH_BUTTON_0
TFC_Ticker[3] is our run time counter. Like the Code Warrior edition, we use msec tickers.
Left (Driver side) trim pot 1 can be used to trim static steering servo Right trim pot 0 can be used to offset line camera
Back LED reflects drive motor status. The top three are not currently used.
Diff: main.cpp
- Revision:
- 0:cd9427630ad1
- Child:
- 2:ce4a273be708
diff -r 000000000000 -r cd9427630ad1 main.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Wed May 29 20:05:20 2013 +0000 @@ -0,0 +1,12 @@ +#include "mbed.h" + +DigitalOut myled(LED1); + +int main() { + while(1) { + myled = 1; + wait(0.2); + myled = 0; + wait(0.2); + } +}