Revision 2:c7fcce20f023, committed 2021-12-11

Comitter:

km200229d

Date:

Sat Dec 11 16:26:54 2021 +0000

Parent:

1:c994530bdb3d

Commit message:

Masa Kovacevic 2020/0229

Changed in this revision

--- a/main.cpp	Sat Nov 27 20:33:49 2021 +0000
+++ b/main.cpp	Sat Dec 11 16:26:54 2021 +0000
@@ -1,23 +1,21 @@
-/*
- * Program implements MQTT client on a NUCLEO-L476RG board
- * using arm mbed-mqtt library and ESP-WROOM-02 WiFi modem.
- *
- * University of Belgrade - School of Electrical Engineering
- * Department of Electronics
- * Bulevar Kralja Aleksandra 73, 11120 Belgrade, Serbia
- *
- * November 2021.
- *
- */
+// Masa Kovacevic  2020/0229
+// Decembar 2021
+
+#include "Adafruit_GFX.h"
+#include "Adafruit_GFX_Config.h"
+#include "Adafruit_SSD1306.h"
 
 #include "mbed.h"
 #include "mb_pins.h"
 #include "platform/mbed_thread.h"
 #include "MQTTClientMbedOs.h"
 
+#define I2C_ADDRESS 0x3c<<1
+#define OLED_HEIGHT_PX 64
+#define OLED_WIDTH_PX 128
+#define I2C_FREQUENCY 400000
 
-// LED2 blinking rate:
-#define BLINKING_RATE_MS                                                     250
+
 // Scaler to 3v3L
 #define VOLTAGE_SCALER                                                      3.3f
 // Client yield timeout in miliseconds:
@@ -32,8 +30,6 @@
 AnalogIn pot1(MB_POT1);
 // Left button on the motherboard:
 InterruptIn sw1(MB_SW1);
-// Right LED on the motherboard:
-DigitalOut led2(MB_LED2);
 // Pointer to a WiFi network object:
 WiFiInterface *wifi;
 // Creating TCP socket:
@@ -43,8 +39,19 @@
 // Message handler:
 MQTT::Message message;
 
-char* topic = "mbed-sample-pub";
-char* topic_sub = "mbed-sample-sub";
+I2C i2c(PB_14, PB_13);
+Adafruit_SSD1306_I2c myOled(i2c,PB_5,I2C_ADDRESS,OLED_HEIGHT_PX,OLED_WIDTH_PX);
+
+
+// Strings for start and stop
+char str11[] = "start";
+char str22[] = "stop";
+// Indicator of start and stop:
+int start;
+int stop;
+// Topic and subscription:
+char* topic = "pubpim";
+char* topic_sub = "subpim";
 // Counter of arrived messages:
 int arrivedcount = 0;
 // Flag indicating that button is not pressed:
@@ -117,24 +124,54 @@
     return count;
 }
 
+// Comparing strings
+bool compare_start(char *str1, char *str2)
+{
+    for (int i = 0, i < 6, i++){
+    
+        if (*str1 == *str2 && *str1 == '\0' && *str2 == '\0'){
+        return true;
+        str1++;
+        str2++;
+        }
+    }      
+  
+    return false;
+}
+
+bool compare_stop(char *str1, char *str2)
+{
+    for (int i = 0, i < 5, i++){
+    
+        if (*str1 == *str2 && *str1 == '\0' && *str2 == '\0'){
+        return true;
+        str1++;
+        str2++;
+        }
+    }      
+  
+    return false;
+}
+
 void messageArrived(MQTT::MessageData& md)
 {
     MQTT::Message &message = md.message;
     //printf("Message arrived: qos %d, retained %d, dup %d, packetid %d\r\n", message.qos, message.retained, message.dup, message.id);
     printf("Message from the browser: %.*s\r\n", message.payloadlen, (char*)message.payload);
     ++arrivedcount;
+    
+    
+    myOled.clearDisplay();
+    myOled.printf("%.*s \r", message.payloadlen, (char*)message.payload);
+    myOled.display();
 }
 
-void buttonFunction() {
-    
-    button_pressed=1;
-   
-}
+
 
 int main()
 {
-    // Set the interrupt event:
-    sw1.fall(&buttonFunction); 
+    
+    
     
     // Create a default network interface:
     wifi = WiFiInterface::get_default_instance();
@@ -158,13 +195,6 @@
         return -1;
     }
     
-    // Print out the information aquired:
-    printf("Success\n\n");
-    printf("MAC: %s\n", wifi->get_mac_address());
-    printf("IP: %s\n", wifi->get_ip_address());
-    printf("Netmask: %s\n", wifi->get_netmask());
-    printf("Gateway: %s\n", wifi->get_gateway());
-    printf("RSSI: %d\n\n", wifi->get_rssi());   
     
     // Open TCP socket using WiFi network interface:
     socket.open(wifi);
@@ -176,21 +206,17 @@
     data.MQTTVersion = 3;
     data.clientID.cstring = "NUCLEO-L476RG-60";
     
-    // Connect the 
-    int rc = 0;
-    if ((rc = client.connect(data)) != 0)
-        printf("rc from MQTT connect is %d\r\n", rc);
-
-    if ((rc = client.subscribe(topic_sub, MQTT::QOS2, messageArrived)) != 0)
-        printf("rc from MQTT subscribe is %d\r\n", rc);
+    client.connect(data);
+    client.subscribe(topic_sub, MQTT::QOS0, messageArrived);
       
     while (true) {
-        // Show that the loop is running by switching motherboard LED2:
-        led2 = !led2;
-        thread_sleep_for(BLINKING_RATE_MS);
-        if (button_pressed==1) {
-            button_pressed=0;      
-            // QoS 0
+        myOLED.begin(); 
+        i2c_obj.frequency(I2C_FREQUENCY); 
+        myOled.clearDisplay();
+        myOled.display();
+        
+        while (start) {
+
             char buf[100];
             sprintf(buf, "V(POT1) = %1.2f\r\n", pot1*VOLTAGE_SCALER);
             message.qos = MQTT::QOS0;
@@ -199,7 +225,11 @@
             message.payload = (void*)buf;
             message.payloadlen = strlen(buf)+1;
             client.publish(topic, message);
+            thread_sleep_for(PRINTF_DELAY_MS);
+            
         }
+        
+        
         // Need to call yield API to maintain connection:
         client.yield(YIELD_TIMEOUT_MS);
     }

--- a/mbed_app.json	Sat Nov 27 20:33:49 2021 +0000
+++ b/mbed_app.json	Sat Dec 11 16:26:54 2021 +0000
@@ -2,11 +2,11 @@
     "config": {
         "wifi-ssid": {
             "help": "WIFI SSID",
-            "value": "\"testing1\""
+            "value": "\"cvele97\""
         },
         "wifi-password": {
             "help": "Wifi Password",
-            "value": "\"testing1\""
+            "value": "\"ekonomskitigar2021\""
         }
     },
     "target_overrides": {