NITH ece
reciever code
Revision 0:0a1680d44129, committed 2013-10-30
- Comitter:
- kit2
- Date:
- Wed Oct 30 13:41:03 2013 +0000
- Commit message:
- group3_reciever
Changed in this revision
| main.cpp | Show annotated file Show diff for this revision Revisions of this file |
| mbed.bld | Show annotated file Show diff for this revision Revisions of this file |
diff -r 000000000000 -r 0a1680d44129 main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Wed Oct 30 13:41:03 2013 +0000
@@ -0,0 +1,88 @@
+
+#include "mbed.h"
+Serial pc(USBTX, USBRX);
+Serial device(p28, p27);
+DigitalOut m11(p21);
+DigitalOut m12(p22);
+DigitalOut relay_stepper(p23);
+DigitalOut stepper1(p24);
+DigitalOut stepper2(p23);
+DigitalOut laser(p25);
+int frame1,frame2,frame3,temp;
+
+int main() {laser=0;
+ char temp=NULL;
+ stepper1=0;
+ stepper2=0;
+
+ device.baud(2400);
+
+ while (1) {
+
+ //RF Receive Code
+ if (device.readable()) {
+ temp=device.getc();
+
+ frame1=temp%4;
+ temp=temp/4;
+ frame2=temp%4;
+
+ frame3=temp/4;
+ //pc.printf("\n\r%d %d %d %d %d",temp,frame1,frame2,frame3,x);
+
+ switch(frame1)
+ {
+ case 0: //left
+ m11=0; // right motor on(p21)
+ m12=1; // left motor off(p22)
+ break;
+
+ case 1: // straight
+ m11=0; // right motor on(p21)
+ m12=0; // left motor on(p22)
+ break;
+
+ case 2: // right
+ m11=1; // right motor off(p21)
+ m12=0; // left motor on(p22)
+ break;
+ }
+ switch(frame2)
+ {
+ case 0: //left
+ relay_stepper=!relay_stepper
+ break;
+ case 1: // right
+ break;
+ case 2:
+ stepper1=!stepper1;
+ stepper2=!stepper2;
+ break;
+
+ }
+ switch(frame3)
+ {
+ case 0: //left
+ m11=1;
+ m12=1;
+ laser=0;
+ break;
+
+ case 1: // right
+ m11=1;
+ m12=1;
+ laser=1;
+ break;
+
+ case 2:
+ laser=0;
+ break;
+
+ case 3:
+ laser=1;
+ break;
+ }
+ }
+ pc.printf("\n\n\r%d %d %d",frame1,frame2,frame3);
+ }
+}
\ No newline at end of file
diff -r 000000000000 -r 0a1680d44129 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Wed Oct 30 13:41:03 2013 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/a9913a65894f \ No newline at end of file