Mbed working as USB-Serial interface using MODSERIAL library. This is working well as interface between CHR-6dm position sensor and its PC soft (AHRSInterface)

Dependencies:   mbed

Files at this revision

API Documentation at this revision

Comitter:
kinemax
Date:
Fri Apr 15 08:00:21 2011 +0000
Commit message:

Changed in this revision

MODSERIAL.lib Show annotated file Show diff for this revision Revisions of this file
main.cpp Show annotated file Show diff for this revision Revisions of this file
mbed.bld Show annotated file Show diff for this revision Revisions of this file
diff -r 000000000000 -r a1601df537a8 MODSERIAL.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MODSERIAL.lib	Fri Apr 15 08:00:21 2011 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/AjK/code/MODSERIAL/#6c9b57c14868
diff -r 000000000000 -r a1601df537a8 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Apr 15 08:00:21 2011 +0000
@@ -0,0 +1,32 @@
+#include "mbed.h"
+#define BAUD 115200
+#define TX_PIN p9
+#define RX_PIN p10
+ 
+ #include "MODSERIAL.h"
+ 
+ DigitalOut led1(LED1);
+ DigitalOut led2(LED2);
+ DigitalOut led3(LED3);
+ DigitalOut led4(LED4);
+ 
+ MODSERIAL pc(USBTX, USBRX);
+ 
+ MODSERIAL uart(TX_PIN, RX_PIN);
+
+ 
+ int main() 
+ {
+     pc.baud(BAUD);
+     uart.baud(BAUD);
+     //pc.printf("Start\n\r");
+    
+   // Transparent uart<->usb - working !
+  while(1)
+  {
+    if( pc.readable()) 
+    {led1=1; led4=0; uart.putc(pc.getc());}
+    if( uart.readable()) 
+    {led4=1; led1=0; pc.putc(uart.getc());} 
+  }
+ }    
\ No newline at end of file
diff -r 000000000000 -r a1601df537a8 mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Fri Apr 15 08:00:21 2011 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/63bcd7ba4912